Used Drilling Machine for sale (64,476)

Condition: new, ALZMETALL pillar drilling machine drilling capacity in steel 30mm Short spindle MK3, spindle stroke: 140mm, throat: 293mm, column diameter: 115mm, machine table usable support: 514x360mm, with T-slots 2 x 14mm x 224mm, distance spindle-table min./max. 132/724mm, machine table height adjustment by hand crank, feed by hand, machine height without options: 1790mm, net weight: 260 kg. Pedpfjid I Ixox Afhspl - Speed infinitely variable 100-1800 rpm Standard equipment: Mushroom pushbutton (latching) for EMERGENCY STOP, reversing switch for clockwise and anti-clockwise rotation, motor protection switch, speed adjustment stepless, speed display digital, protection class IP54, spindle protection with electrical fuse, painting: DD-structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 1965, 40-1080 tool taper MK 5 weight of the machine ca. 2 t Podpfxeiyzqqj Afhspl feed . +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, 1980 tool taper MK 205 - 1450 m/min. boring range: 3 - 40 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Ppodpfx Aor Dv Tgefhol Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2022, New exhibition machine! List price: 14,200.- 400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with impulse operation via foot pedal: Clamping-Drilling-Unclamping, electric automatic return of the drilling unit after reaching the preset drill depth - Automatic drill hole depth extension for end-grain drilling, eliminating the need to reset the drill depth when switching from flat to end-grain drilling (+10 mm, e.g., for dowel length 35 mm, flat drilling depth 14 mm, end drilling depth 24 mm) Psdpeqw Ek Iefx Afhepl - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) - Including 21 quick-change chucks (Ganner system) for easy tool changes - Simple swiveling of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamp carrier, adjustable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm Complete stop system consisting of: - 1 stop ruler 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop stops; quick-change system easily switchable from right to left stop side for mirror drilling of shelves in cabinet constructions; usable also for hole line drilling in the 32 mm system - End stops and position settings, as well as drilling height positioning via support table with mechanical digital display - End stops can be easily swiveled away for quick conversion from cabinet to frame and vice versa - Support arms for clamp carrier made for hole-line positioning up to max. 300 mm Ideal three-stage tooling system. 1 set of dowel drills: 5 carbide dowel drills Ø 8x77 mm, right / 4 carbide dowel drills Ø 8x77 mm, left Additional equipment: - Extraction funnel, dust-tested, Ø 120 mm - Set for line boring in the 32 mm system, complete with: 2 guides with scale and adapter for positions up to max. 300 mm; 2 pairs of stop cams for line boring at Y-positions 37 mm and e.g. 300 mm; 1 basic ruler 1000 mm (aluminum profile 40x40 mm); 1 setting gauge for line boring - 1 set of drills: 11 carbide hole-line drills Ø 5x57 mm, right; 10 carbide hole-line drills Ø 5x57 mm, left - Hydraulic brake cylinder - Clamping cylinder with holder, additional Storage location:

Condition: used, Year of construction: 1980, ja feed 80 - 800 m/min 1848 weight of the machine ca. 2,2 t Pjdpfxeix Rdme Afhjpl +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Specification Spindle Speeds 9.5 to 1560 (18) Spindle taper No 5 morse Spindle travel 410mm Feeds 0.066 to 0.963 Max spindle height spindle to base 70” Column dia Graduations metric Power Locking Equipment Safety brake Box table Coolant Podpfx Afsrpiy Tehspl Electrics 440 V 3 phase 50cycles Approx Dims 9’ x 5’ x 11’6” and weighs approx. 6 tons

Condition: good (used), DONAU DR 40 Z - High-speed radial drilling machine incl. tooling - Drilling capacity / steel approx. 40mm - 18 spindle speeds 35-1800 rpm - Drilling capacity / cast iron approx. 50mm - Thread cutting capacity / steel M33 - Thread cutting capacity / cast iron M45 - Automatic feeds 0.075-0.60 rpm - Spindle taper MK 4 - Quill diameter 55mm - Quill stroke 220mm - Column height adjustment 450mm - Drilling radius min/max 305-1005mm - Table size 1200x600mm - VARIOUS TOOLS SEE PICTURES Dimensions: LxWxH 1.9x2.3x2.8 meters / Weight 1800kg Podoyfwwcjpfx Afhjpl Subject to errors and input mistakes

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, High-precision drilling and milling machine Fehlmann model Picomax 54 Heidenhain TNC 310 very good condition Technical Data: >> Year of construction: 2001 >> Travel X/Y/Z 500/ 250/ 160 mm >> Travel distance W 480 mm >> Clamping surface (L x W) 885 x 320 mm >> Permissible table load 250 kg >> Distance table - spindle nose 0 - 605 mm >> Feed speed X/Y 1 - 2000 mm/min >> Feed speed Z 1 - 1200 mm/min >> Tool quick-change system SF 32 >> Speed range infinitely variable 9200 rpm >> Drive power 5 kW >> Space requirement (W x D x H) 1850 x 2550 x 2400 mm Ppsdpfxjukf Nco Afhsl About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It has a Heidenhain TNC 310 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The machine runs very smoothly at maximum speeds. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm Psdsby Stpepfx Afhepl • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 Pjdpfxsx D Dnkj Afhspl This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Pjdpfxjx S Sizo Afhspl Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible. Pedpfxsx Db U Uo Afhspl

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 106 155 - 11, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. Podpfxjw Agqhj Afhspl All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: ready for operation (used), functionality: limited functionality, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Placing a bid obligates you to collect the machine by the deadline of 28.01.2026! Prompt scheduling of an appointment is necessary after the end of the auction, as the machine has not yet been dismantled! TECHNICAL DETAILS Working spindle diameter: 100 mm Taper bore of working spindle: ISA steep taper No. 50 Drilling depth in one stroke: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Cross travel of the table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 - mm/rev Stepless feeds for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase current Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation incl. wiring diagram Electrical diagrams Operating manuals Note: Brake defective, clutch removed (included). Repair costs in Germany approx. €3,000. Psdpfxex Hfugs Afhspl

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Ppedpfx Aox Sw Nmofhjl Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 °

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Psdpox Sw Ngsfx Afhopl Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: excellent (used), Year of construction: 2014, bore capacity in steel (diameter) 45 mm arm length 1050 mm Vertikal stroke 450 mm quill stroke 200 mm spindle taper MK 4 spindle turning speed range 15 - 2800 U/min transmission ratio 2 Psdpfxex Szp Rj Afhspl distance spindle /table 710 mm weight of the machine ca. 2600 kg dimensions of the machine ca. 3000 x 3000 x 3220 mm

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 32 mm arm length 950 mm turning speed range 51 - 1000 U/min turning speeds steps 12 bore spindles - Morse Taper MK 4 quill stroke 160 mm feed range 0,075 x 0,3 mm/min table surface area 1200 x 510 mm total power requirement 2 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment Ppodpfx Afjyfwzbjhjl - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445

Condition: used, bore capacity in steel (diameter) 25 mm throat 220 mm bore stroke 110 mm taper MK 3 MK table-size 350 rund mm turning speeds 100 - 2080 U/min connected load frequency 400 V total power requirement 0,9 KW weight of the machine ca. 0,2 t dimensions 0,8 x 0,6 x 1,9 m Pedpfeyfwy Rex Afhjpl

Condition: excellent (used), operation weight: 21,000 kg, Year of construction: 2008, operating hours: 16,850 h, Sandvik DP1100 Year : 2008 operation hours: 16.850 hrs Hammer hours: 8.180 hrs ROPS Back drive camera Pedpfsx Nh Tdsx Afhepl incl. drill rods 1 × drill hammer CAT engine CE U/C : 60-70% good operation weight : 21 to

Condition: like new (used), Year of construction: 2018, Number of independent vertical spindles: 8 Number of horizontal X-axis spindles: (2+2) No. of horizontal Y-axis spindles: (1+1) No. 1 blade for channel execution on the back of the cabinet: (ø 100 mm) Max. panel thickness: 50 mm Control: Full Parametric Max panel weight: 25 kg Max panel dimensions (see layout) : X ,Y 920, Z 50 mm Min panel dimensions: X 270,Y 150 (70 op.), Z 12mm Numbers of controlled axes: 3 Pedpfxjuxmvzj Afhepl Panel feed rate: 25m/min Spindle rotation: 3600 rpm Operating pressure: 7 bar Suction mouth diameter: ø 120 mm Suction rate: (2000 mc/hour) - (30 m/s) Max depth of all horizontal drilling in X and Y: 30 mm Max drilling depth in vertical: 45 mm Max horizontal drill bit diameter: 12 mm Max vertical drill bit diameter: 35 mm Motor: 1.5 kw Dimensions: 2200x1350x1550 mm Weight: kg 715 CE standards

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Psdpfx Asx Tp Ahefhjpl Year: 2005

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. Ppsdpfx Afjd S Uhqohol The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Ppodeuyh Unopfx Afhjl

Condition: like new (used), Year of construction: 2021, Machining centre, drilling centre Biesse Brema Eko 2.1 Psdpfx Asya Eicofhjpl Year of manufacture: 2021 X: 200 – 2600 mm Y: 35 – 900 mm Z: 8 – 60 mm Tool magazine: 8 positions Traverse speeds: X/Y-axis: up to 65 m/min Z-axis: up to 20 m/min