Used Eccentric for sale (800)

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! 🔄 Shaking & Drive System * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). Bedpoz Dhl Rsfx Agkodi * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm Bjdjzr I H Tspfx Agksdi - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder Bedpfeznkldjx Agkjdi -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. Bedpfxsz Hx T Rj Agkodi The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric & manual hydraulic pump, loading ramp set (ramps + supports), parabolic suspension +100km/h Equipment: -Full steel floor -H-frame front -5-stage cylinder Net price: €9,050.42 / Gross price: €10,770.00 Article number: CHP235331811.05 Technical data: • Brand: Hapert Trailers • Model: Cobalt Plus • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/HU: 2 years from initial registration • Internal dimensions (LxWxH): 335 x 180 x 40 cm • External dimensions (LxWxH): 468 x 186 x 113 cm • Loading height of the floor: 73 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,106 kg • Payload: 2,394 kg • Chassis: High-loader (wheels under the body) • Tires: 185/70R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for attaching a cargo net, etc. • 40cm aluminum side panels with robustly integrated locks • Aluminum side panels, anodized, double-walled • Powder-coated side panels (anthracite/black) • All side panels foldable and removable • Steel corner posts, removable • Insertion possibility at all 4 corners for tarpaulin frames, grating attachments, side panel attachments or front wall extensions • Cargo net hooks on hinge lower parts • Stable eccentric locks • High grating 185x70cm for insertion • Full steel floor, 3mm hot-dip galvanized - extremely robust • Reinforced, firmly screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal struts, continuously welded • All cross and longitudinal members rest on the ground • 6 lashing eyes recessed inside the side edge (1000DaN/kg), TÜV certified! • U-profile on the rear for easier attachment of the loading ramps • Loading ramp compartment with license plate flap • 2x integrated aluminum ramps, 250cm, load capacity: 3,600 kg • 2x crank supports, rotatable & crankable, heavy-duty • 1x crank for rear supports incl. holder • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status display • Manual hydraulic pump • External battery charging socket for 230V charger • Hapert 230V battery charger for Cobalt tipper • Parabolic axle from KNOTT • Shock absorbers for 100km/h, installed • Parabolic axle for absolute driving comfort! • Reinforced tires 185/70R13C • Reversing automatic • KNOTT inertia coupling and parking brake • 13-pole plug • Reversing lights Bedpfez Ri A Sjx Agkjdi • Large-sized safety lighting • Full-LED taillights incl. tail light protection grille • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced 70mm automatic support wheel with console

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Bdsdpeznn Hrefx Agkji Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Industrial vibratory classifying screen, vibrating screen, two-deck screening machine, Binder+Co WS 1300, Used Machine Bdsdpfezxd Tcsx Agksi Manufacturer / Brand: Binder+Co AG (Gleisdorf, Austria) Type: WS 1300 Serial No.: S 2035 Order No.: 20 235/20 Year of Manufacture: 1992 Design: Robust two-deck steel construction with upper dust protection cover featuring a dust extraction connection. Drive: Cardan shaft drive / power transmission between the drive motor and the eccentric shaft. Accessories: 4 heavy-duty vibration-damping rubber mounts for the spring/suspension mounting points. SCREEN DECKS: Upper deck: Bar screen with approx. 12 mm bar spacing, suitable for coarse screening. Lower deck: Square-mesh screen with approx. 12 × 12 mm aperture size, suitable for fine screening. APPLICATION: Ideally suited for the accurate separation and classification of gravel, sand, stone, coal, recycled materials, scrap metal, and other bulk industrial materials according to particle size. OVERALL DIMENSIONS: Width: 3300 mm Depth: 2130 mm Height: 1440 mm Weight: 2300 kg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Steel side panels, parabolic suspension, off-road 185/70R13C tires Equipment: - Electric pump - All-steel floor - Ramp storage compartment Net: €7,016.81 / Gross: €8,350.00 Article number: VTB235321712.01 Technical data: • Brand: Variant • Model: 3517 TB • Vehicle type: Three-sided tipper • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 320 x 168 x 35 cm • External dimensions (L x W x H): 475 x 186 x 120 cm • Loading height of the floor: 72 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,026 kg • Payload: 2,474 kg • Chassis: High loader (wheels under the body) • Tires: 185/70R13C • Suspension: KNOTT parabolic suspension • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Double-walled, hot-dip galvanized steel side panels • All side panels can be folded down and removed • Removable steel corner posts • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel attachments or front wall extensions • Rear flap can also be pivoted (swing tailgate) • Sturdy eccentric locking mechanisms • All-steel floor - extremely robust Bdodpfx Agozy Akiekji • Reinforced, securely screwed V-drawbar • Very stable steel frame, welded • Many cross members, resulting in high point load capacity • Additional longitudinal struts continuously welded in • All cross and longitudinal members rest on the ground • 6 lashing eyes inside the cargo area (1000 DaN/kg) • U-profile on the rear for easier attachment of the ramps • Ramp storage compartment for ramps • Solid 4-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/74AH) in the box incl. cover • Detachable remote control for electric hydraulics • Integrated battery charger, as well as battery charge level indicator • Emergency hand pump for tilting manually when the battery is empty • External battery charging socket CEE 230V (connecting cable included) • Parabolic axle from KNOTT • Parabolic axle for absolute driving comfort! • Reverse assist • KNOTT overrun device and parking brake • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function, manual winch Equipment: - Loading angle 10.5° - Universally usable, sideboards can be retrofitted - 10x lashing points Net price: €6,302.52 / Gross price: €7,500.00 Article number: MUI335502100.01 Technical data: • Brand: Martz • Model: GT UNIVERSAL 500 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (LxWxH): 507 x 210 x 0 cm • External dimensions (LxWxH): 663 x 221 x 94 cm • Loading height of the floor: 0 cm • Permissible total weight: 3,500 kg • Unladen weight: 902 kg • Payload: 2,598 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Ability to attach sideboards, tarpaulin frames, sideboard extensions, or front wall extensions at all 4 corners • Vehicle is also designed for all options after purchase: enormous potential for retrofitting: sideboards, tarpaulins, etc. can be retrofitted at any time • Screen-printed wooden floor, non-slip and waterproof • Steel loading ramp, standing on a shaft, 120cm • Sturdy eccentric locking mechanisms on the rear ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • Hydraulically tilting loading platform (10.5° loading angle) • Manual hydraulic pump • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous continuously welded crossmembers for high point loads • Manual winch with winch stand • 12x lashing points recessed in the frame profile (600dAN/kg), certified • Reverse assist • KNOTT overrun device and parking brake • Very stable V-drawbar, REINFORCED • 13-pole plug • Reversing lights • Large-format safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Rear position lights LED Bdedpfszy Ak Nex Agkji • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Features: - Loading ramp - 8x Lashing points - Loading angle 16° Net: €4,886.56 / Gross: €5,815.00 Article number: MBA335401800.01 Technical data: • Brand: Martz • Model: BAU-3 400/3 S • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 400 x 182 x 25 cm • External dimensions (LxWxH): 601 x 242 x 182 cm • Loading height of the floor: 34 cm • Permissible total weight: 3,500 kg • Tare weight: 755 kg • Payload: 2,745 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/50R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders, walkable, with continuous safety anti-slip strips • Screen-printed wood floor, continuous without joints, slip-resistant and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Steel loading ramp, standing on a shaft • Stable eccentric locking mechanisms • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side extensions or front panel extensions • Robust support feet on the loading ramp • Lifting aid for the loading ramp • Very low chassis for a low loading angle • With bucket rest • 8x lashing points recessed in the frame profile (600dAN/kg), TÜV certified • Maintenance-free rubber spring axles from KNOTT • Reversing automatic • KNOTT drawbar coupling and parking brake • Very stable, bolted V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Rear position lights • Integrated rear fog light • Lighting recessed in the rear frame Bodpfx Agszy Amkeksdi • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump Equipment: - 6 lashing eyes - Aluminum side panels - Electric pump Net price: €4,508.40 / Gross price: €5,365.00 Article number: HUK227271511.01 Technical data: • Brand: Humbaur • Model: HUK 272715 • Vehicle type: Rear tipper • Vehicle condition: New • First registration: Without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 268 x 150 x 30 cm • External dimensions (LxWxH): 416 x 164 x 98 cm • Loading height of the floor: 67 cm • Permissible total weight: 2,700 kg • Unladen weight: 606 kg • Payload: 2,094 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized, double-walled • Aluminum side panels, anodized, double-walled • All side panels can be folded down and removed • Steel corner posts, removable • Option to insert at all 4 corners for tarpaulin frames, lattice attachments, side panel attachments or front panel extension • Stable eccentric locks • Solid steel floor - extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous crossmembers for high point loads • Additional longitudinal struts continuously welded • E-hydraulics for tilting with battery in the box and cover • 71AH battery • Battery is charged via a 13-pin connector from the towing vehicle (all pins of the socket must be connected) • External battery charging socket for 230V charger • 6 lashing eyes recessed inside on the side edge (800DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • 13-pin connector Bdedpfx Ajzy Ar Hegkoi • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, front-mounted, 1x side panel extension Equipment: - 4x tie-down points - Steel cover - Steel side panels Net price: €3,352.94 / Gross price: €3,990.00 Article number: KEU375241211.01 Technical data: • Brand: TPV Trailers • Model: KT-EU3 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 243 x 123 x 106 cm • External dimensions (LxWxH): 356 x 168 x 178 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Tare weight: 349 kg • Payload: 401 kg • Chassis: Low loader (wheels next to the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Side panels made of 1.5 mm steel sheet with aluminum-zinc coating • with 1x side panel extension • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9mm, continuous without joints, non-slip and waterproof • Eccentric locking mechanisms for the rear door and cover • Galvanized V-drawbar • Plastic mudguards • Cover made of steel, KTL-coated and black powder-coated, 56 mm high with roof rails, splash-proof • Load capacity of the cover: 20 kg open / 75 kg closed • 4 tie-down eyes mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer approval • 2x rear supports mounted • Support wheel mounted with clamp • 13-pin connector • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Bdjdpfxezy Ar Tj Agkoi Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - 4 lashing eyes - accessory kit Net price: €903.36 / Gross price: €1,075.00 Article number: KEU275201035.02 Technical data: • Brand: TPV Trailers • Model: KD-EU2 Alu • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 202 x 108 x 35 cm • External dimensions (L x W x H): 296 x 152 x 89 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 124 kg • Payload: 626 kg • Chassis: Low-loader (wheels beside the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Side panels made of double-walled, anodized aluminum profiles • Round knobs for mounting nets or tarpaulins • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 12 mm thick, continuous without joints, non-slip and waterproof • Eccentric locks for the rear door • Galvanized V-drawbar • Plastic fenders • Insertion option at all 4 corners for tarpaulin frames, grid attachments, side panel attachments, etc. • 4 lashing eyes mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer approval • Can be easily parked upright • 13-pole plug • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame Bjdpszy Aywefx Agkodi _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates including customs declaration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair/workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, functionality: fully functional, empty load weight: 4,100 kg, maximum load weight: 13,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2008, loading space volume: 31 m³, suspension: air, tire size: 385/65 R22.5, color: other, trailer brake: trailer braked, Year of construction: 2008, Equipment: ABS, 2-axle silo trailer for flour or animal feed 3 compartments, approx. 8,500 / 13,500 / 9,000 liters Compartment 2 with pressure dividers (separate compartment) Loosening mechanism for compartment 1 + 3 with loosening mat Loosening mechanism for compartment 2 with Silomar blower 3 access hatches with eccentric locks Individual outlets on the right pneumatic vibrator per compartment Bottom flaps DCA axles with disc brakes ABS Tires: 4 x 385/65 R22.5 on aluminum rims (used) Bodpfx Agezy R Nyeksdi 2 hose pipes Aluminum toolbox

Condition: used, Year of construction: 2010, 2010 | Wacker Neuson DPU130 | Used Hand compactor 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Lombardini Engine. Reversible plate with remote control. Impact force 5 tons. Few hours. Eccentrics were replaced at 285 hours. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40831 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Bdodpey Rukljfx Agkji

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting function Features: - Steel sideboards - Accessory kit - 4x Tie-down points Net price: €721.85 / Gross price: €859.00 Article number: REU275201035.01 Technical data: • Brand: TPV Trailers • Model: RK-EU2-K Light • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (L x W x H): 202 x 107 x 35 cm • External dimensions (L x W x H): 296 x 150 x 96 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 138 kg • Payload: 612 kg • Chassis: Low-loader (wheels next to the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Optional, can be retrofitted • 100km/h approval: Yes DESCRIPTION • Sideboards made of 1.0 mm steel sheet with aluminum-zinc coating Bdsdpfx Agszy Dfuokei • Round knobs for mounting nets or tarpaulins • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9mm, continuous without joints, non-slip and waterproof • Eccentric locks for the rear door • Rear door made of aluminum tread plate for driving up / 250kg load capacity • Manual tilting function • Galvanized V-drawbar • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grid attachments, sideboard attachments, etc. • 4 tie-down loops mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100km/h manufacturer approval • Can be easily tilted upright • 13-pin connector • Oversized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Steel side panels - Accessory kit - 4 lashing eyes Net price: €626.05 / Gross price: €745.00 Article number: KDE275201035.01 Technical data: • Brand: TPV Trailers • Model: KD-EU2 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (German vehicle inspection): 3 years from first registration • Internal dimensions (LxWxH): 202 x 107 x 35 cm • External dimensions (LxWxH): 296 x 152 x 86 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 116 kg • Payload: 634 kg • Chassis: Low loader (wheels next to the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Side panels made of 1.0 mm steel sheet with aluminum-zinc coating • Round knobs for attaching nets or tarpaulins • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9 mm thick, seamless, non-slip and waterproof • Eccentric locks for the rear door • Folding, galvanized V-drawbar • Space-saving storage in garages and carports with an internal height of approx. 2.15 m • Folding drawbar function for tilting, making it easier to load and unload the trailer with bulk goods. • Plastic fenders • Option to insert at all 4 corners for tarpaulin frames, grid attachments, side panel attachments, etc. • 4 lashing points mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer approval • Easy to store upright • 13-pin connector • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame Bdedpfxjzy Dpts Agkoi _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been an authorized dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - 8 tie-down points - Aluminum sideboards - Manual hand pump Net: €4,306.72 / Gross: €5,125.00 Article number: HUK230311701.01 Technical data: • Brand: Humbaur • Model: HUK 303117 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 314 x 175 x 30 cm • External dimensions (L x W x H): 451 x 189 x 97 cm • Loading height of the floor: 67 cm • Permissible total weight: 3,000 kg • Tare weight: 685 kg • Payload: 2,315 kg • Chassis: High-loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic Bjdpozy Dqdsfx Agkedi • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum sideboards, anodized, double-walled • Aluminum sideboards, anodized, double-walled • All sideboards foldable and removable • Steel corner posts, removable • Insertion option at all 4 corners for tarpaulin frames, grille attachments, sideboard attachments, or front wall extensions • Stable eccentric locks • Solid steel floor – extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded in continuously • Double-acting hand pump for manual tipping • 8 tie-down eyes recessed inside the side edge (800 DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrunning device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific customizations! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers and repair workshops for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: E & Emergency hand pump Equipment: - Aluminum side walls - 8x tie-down points - Electric pump Net: €5,033.61 / Gross: €5,990.00 Article number: HUK230311711.01 Technical data: • Brand: Humbaur • Model: HUK 303117 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 314 x 175 x 30 cm • External dimensions (LxWxH): 451 x 189 x 97 cm • Loading height of the floor: 67 cm • Permissible total weight: 3,000 kg • Unladen weight: 735 kg • Payload: 2,265 kg • Chassis: High loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side walls, anodized, double-walled • Aluminum side walls, anodized, double-walled • All side walls can be folded down and removed • Steel corner posts, removable • Option to attach tarpaulin frames, grid attachments, side wall extensions, or front wall extensions at all 4 corners • Stable eccentric locks • Full steel floor - extremely robust • Reinforced continuous V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members, resulting in high point load capacity • Additional longitudinal struts welded in continuously • E-hydraulics for tipping with battery in the box and cover • 71AH battery • Battery is charged by the towing vehicle via a 13-pin connector (provided that all pins of the socket are connected) • External battery charging socket for 230V charger • 8 recessed tie-down points inside on the side edge (800 DaN/kg), TÜV certified! • Solid 4-stage hydraulic cylinder • Maintenance-free rubber spring axles from ALKO • Reverse automatic • ALKO overrun device and parking brake • 13-pin connector Bodpszy Dvysfx Agkjdi • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel, centrally located _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Bedpfx Aezz Ax Asgksdi

Condition: used, functionality: fully functional, turning diameter over bed slide: 2,500 mm, total length: 3,750 mm, total width: 850 mm, total height: 1,350 mm, spindle speed (max.): 1,000 rpm, Global Nordic 25 lathe. Bodpfxj Aa Iyge Agkedi Equipped with a three-jaw chuck, a four-jaw chuck, an eccentric four-jaw chuck, and various drills. 18 speeds. Hollow spindle, 78 mm. Speed n=rpm 12.5. 400V.

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has been in almost no operation since then. The system efficiently covers the entire process from stringer prefabrication, main nailing, IPPC marking to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment of almost all components at the push of a button! • Main line output: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line output: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens PLC S7 (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2020) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs) hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Independent operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, outfeed buffer. • Support/spare parts long-term secured through successor AVM Metaalbewerking. Pos. 2: Intermediate drive with integrated IPPC marking station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic mode. • Auto-adjustment at the push of a button: width (700-1500 mm) & height motorized via spindle. • 2 lengthwise adjustable marking units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (fully automatic with nesting) • Stable double-column portal with lifting traverse (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Bdsdpfs Afyn Hjx Agkei Pos. 5 & 6: Roller conveyor & safety devices • Heavy-duty removal (approx. 5,900 mm), driven with 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and removal are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Year of construction: 1970, condition: ready for operation (used), Throughput capacity milk, cocoa: 600 kg/h, components: Instantizer (main process chamber), F-10 atomizer, Vibroflux eccentric element, steam air heater, air heater, ceiling air distributor, DDMM centrifugal pump, washing sluice, material feed sluice, hopper discharge device, Allgaier tumbler screening machine, Aerzener rotary lobe blower, Haug compressor unit, Gericke vertical conveyor, Amer-glas prefilter with DRI-Pak fine filter, electrical equipment, main wiring diagram, electric hammers, chamber safety system with vacuum monitor, Varimax control system, Clorius temperature controller, Variadyn motor control system, plant has been stored dry for 10 years, completeness of the plant cannot be guaranteed, major components are available, without control cabinet, extensive documentation and spare parts, no known defects, operating hours unknown, an on-site inspection is possible. Bjdpfx Agozghflskjdi

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Bjdpfxey Ndfio Agkodi

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Bdedsv Extbepfx Agkji