Used Eccentric for sale (896)

Condition: new, Year of construction: 2022, machine/vehicle number: 2918542, Brand new machine. Dwodpfx Adji A Ilpekoc

Condition: good (used), Year of construction: 1984, Automatic Press Factory Warszawa-Włochy Dedsw Uaxzjpfx Adkewc TYPE PXS 100 Eccentric Press, pressure 100 t Year of manufacture: 1984

Condition: refurbished (used), Year of construction: 2010, Technical main data of the PE 200 / 1400 C MA - new UVV (Accident Prevention Regulation) Nominal pressing force: 2,000 kN Stroke of ram, adjustable in steps: 21...220 mm Ram adjustment: 110 mm Throat depth: 420 mm Stroke rate in idle: 45 /min Continuously variable stroke rate: 25...80 /min Shut height (max. stroke bottom, adjustment top): 520 mm Table clamping surface (W x D): 1,400 x 800 mm Ram clamping surface (W x D): 1,000 x 600 mm Plunger bore in ram: 65 H7 Main motor power: 15 kW Machine height approx.: 3,800 mm Dwedpfx Ajxb A Nzsdksc Machine weight: 15,900 kg - Press safety control by PILZ with plain text display PX 20 - Continuously variable stroke rate by ABB - Motorized ram adjustment - Main motor with reversing circuit - Hydraulic overload protection - Semi-automatic stroke adjustment - Foot switch, two-hand operation - Tie rods (removable if disturbing) - Additional clamping plate - Centering groove - Vibration damping feet

Condition: used, Eccentric presses, 3 units according to machine nameplates (1 operating manual available). All for sale at a good price! Free loading with overhead crane. Dwodpfx Adjxcmwxjksc

Condition: good (used), Year of construction: 1984, functionality: fully functional, pressing force: 63 t, Band saw LEN63C Dodpfou Nkfuex Adkswc

Condition: ready for operation (used), functionality: fully functional, Technical data of the press: Name: Eccentric press SCHULER Model: PD 63 Pressing force: 63 tons Overall dimensions (L x W x H): 1800 x 1300 x 2500 mm Weight: approx. 4500 kg Table dimensions (L x W): 700 x 550 mm Table opening (L x W): 265 x 265 mm Ram dimensions (L x W): 320 x 300 mm Ram stroke: 135 mm (fixed) Max. distance ram to table: 400 mm PLC components: SIEMENS SIMATIC S7-300 Pneumatic components: FESTO Control modes: single stroke (foot switch, two-hand lever), continuous (automatic mode – adjustable time interval 1–99,999s and repetitions 1–32,000) Special feature: lower dead point adjustment Automatic lubrication system Pneumatic actuation and braking Dwedpfx Adew R Tl Tokoc Note: Two identical presses are available (only difference is display size: 7" and 4.3"). Price for both: €16,000. Technical documentation is not available. Online PLC programming assistance from a programmer can be arranged. Shipping is charged separately.

Condition: excellent (used), Year of construction: 1952, Robust workshop machine with character – manufactured in the renowned German factory A. Nothelfer & Söhne Ravensburg. Year of manufacture: 1952, but still fully operational, complete, and ready to work! - Siemens-Schuckert Motor • Power: 0.8 kW • Speed: 1,400 rpm • Power supply: 3-phase 220/380V • Current: 3.5/2 A • Frequency: 50 Hz • Cos φ: 0.8 - Technical condition • Fully mechanically operational Dwsdpfx Asw E I Sfsdkoc • Belt drive with three-phase motor • New supporting frame with mounting holes • Foot pedal control • Electrical inspection recommended (older visible power system) - Additional information • Original nameplates • Type designation illegible, but identified by factory serial number 134058 • Work table with slots for fixture mounting • Solid, heavy construction – built for decades of use • Weight: 480 kg - Applications: stamping, punching, cutting, bending metal parts – ideal for the workshop, forge, tool production, or for an industrial machinery collection.

Condition: used, Progressing Cavity Pump 10m³/h, Seepex, BN 10-6LS Item No.: Pum 4 Manufacturer: Seepex Model: BN 10-6LS Used, in good condition Stock quantity: 1 Available: immediately Delivery rate: 10 m³/h Year of manufacture: 2020 Motor Manufacturer: Nord Power: 1.5 kW Voltage: 3 x 400 Volt Speed: 1415 rpm Progressing Cavity Pump 10m³/h Seepex BN 10-6LS Item No.: Pum 6 Manufacturer: Seepex Model: BN 10-6LS Condition: unused, new Stock quantity: 1 Available: immediately Delivery rate: 10 m³/h Year of manufacture: 2020 Motor Manufacturer: Nord Power: 1.5 kW Voltage: 3 x 400 Volt Speed: 1415 rpm Progressing Cavity Pump 10 m³/h, Netzsch, NM045BY Item No.: Pum 27 Dwodpfx Asxb Rvvodksc Manufacturer: Netzsch Model: NM045BY Condition: used, good condition Stock quantity: 1 Available: immediately Delivery rate: 10 m³/h Delivery pressure: 3 bar Speed: 255 rpm Year of manufacture: 2019 Motor Manufacturer: Nord Power: 1.25 kW Voltage: 3 x 400 Volt Progressing Cavity Pump 6 m³/h Netzsch, NM038BY Item No.: Pum 28 Manufacturer: Netzsch Model: NM038BY Condition: used Stock quantity: 1 Available: immediately Delivery rate: 6 m³/h Delivery pressure: 3 bar Speed: 276 rpm Year of manufacture: 2019 Motor Manufacturer: Nord Power: 0.88 kW Voltage: 3 x 400 Volt

Condition: good (used), in total 3 pieces available 1 x SEEPEX BN2-6L, 0,75 kW, year 2006 1 x NETZSCH NM045, GETRIEBEBAU NORD, year 2001 1 x manufacturer unknown, LEROY SOMER gearbox, 5.5 kW Dodpfx Adslhr Hfjkswc

Condition: new, PTG - eccentric die 9 and 10 mm Ø, anvil 15°, clamping/equalising plates, Dsdpfjpfaxuox Adkjwc PMH - Anvil 15° and others, clamping/equalising plates 6°/4° and 8°/5° POR 40/42U - eccentric die 9.5 mm Ø, anvil 9.5 mm Ø

Condition: new, Year of construction: 2025, table width: 1,700 mm, table length: 3,500 mm, pressing force: 600 t, stroke adjustment: 350 mm, distance table to quill: 1,100 mm, warranty duration: 24 months, Equipment: safety light barrier, H TYPE ECCENTRIC PRESSES GENERAL FEATURES o Steel construction body and parts of which stress / welding tension is relieved by vibration method o 8-sided slide / guide for high precision and long life o PLC control and touch panel o EN ISO 15614-1 / 2017 welding application certificate that has passed WPQR and WPS approval accredited by TÜRK-AK. (Welding applications are inspected by "welding coordination engineers" certified according to EN ISO 14731) o Parallelism and perpendicularity tolerance is applied according to ISO and DIN Norms. (≤ 120 micron/meter) o Pneumatic clutch and brake combination o Motorized RAM height adjustment o SIEMENS / SCHNEIDER electrical components o Automatic central lubrication system Double hand control TECHNICAL SPECIFICATIONS FOR 600 TONS H TYPE ECCENTRIC PRESS – EHEP Dodpfx Asvtxc Sjdkswc BODY STRUCTURE AND DIMENSIONS - Steel construction with 8 guided RAM and structure with column shafts. - Stress will be relieved by vibration to the body welded parts. - Movable Table usable area will be 1700x3500 mm. - Fixed table usable area will be 1700x3500 mm. - Parallelism and perpendicularity tolerances will comply with ISO and DIN norms. - Stroke:350 mm (Fixed). - Table-RAM Distance will be min.600 mm, max. 1100mm. - Ram height adjustment will be 150 mm. - Table-RAM distance adjustment by engine. - Press Height will be approximately 6300 mm. - Press width will be approximately 5550 mm. - Press depth will be approximately 3750 mm. - Main plate height from the ground will be approximately 1000 mm. - Side window size of the press 700 mm - Connectors, main and intermediate bearings will be bronze (Zr14). - Slide bearing will be bronze (Zr14). - There will be automatic lubrication for slides and all bearings. - Lubrication will be automatic grease lubrication, dosage adjusted and clogging sensor. - There will be a heat meter on the connecting rod. - It will have a double connecting rod. _ - It will be with pneumatic clutch and brake combination. - There will be 4 RAM cushioning cylinders. - Hydraulic overload protection system by.-Technofluid-Sandsun - It will be a gear eccentric system. - Approximate press weight 124,000 kg. AUTOMATION and ELECTRICAL INFORMATION - The main engine will be 110 kW. – IE3 - PLC: Siemens - Touch Panel: Siemens KTP 7'' series - It will be a speed control device. - Speed: 15 ~ 25 spm - Memory: 100 recipes - With glass encoder. - Switchgear material will be Siemens and Schneider. - There will be a piano type electrical panel and control panel. - Table-RAM distance measurement can be viewed on the screen. - Security plc PILZ- Pnoz Multi - Beam barriers KEYENCE, LEUZE or SICK – 2 sets - There will be a double coil safety valve.

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Dwjdpfx Adjmi Rpiokoc 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: used, Single-column eccentric press WEINGARTEN type EV 63 Machine. No. 738 / 61 Year of construction 1962 Pressure capacity 63 ton. throat 260 mm Table surface 630 x 530 mm Table opening Ø 210 mm ram surface 315 x 260 mm Plunger stroke adjustable 8-100 mm Plunger adjustment 63 mm Installation height max 450 mm Stroke rate 115 strokes / min. Compressed air requirement min. 4.5 bar Dedpfx Adek S Htxokewc Motor power 4 kW Mains connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electric lift release via foot switch or two-hand operation - Overload protection by breaker plate - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC overrun protection - Front crankshaft support bearing - Press table height-adjustable via 2 threaded spindles - Manual central grease lubrication - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons good condition

Condition: used, Single-column eccentric press WEINGARTEN type ER 63 Machine. No. 52A / 63 Year of construction 1963 Pressure capacity 63 ton. throat 280 mm Table surface 630 x 530 mm ram stroke adjustable 8-100 mm ram adjustment 63 mm Dsdpslb I Dzefx Adkjwc Stroke rate 65 strokes / min. Motor power 4 kW Mains connection 380 Volt, 50 Hz - Clutch/brake combination with WEINGARTEN friction threaded clutch - Electric lift release via foot switch - Wheel reduction gear - Overload protection by breaker plate - Front crankshaft support bearing Space requirement L x W x H 1500 x 1100 x 2500 mm Weight 4.5 tons good condition

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm Djdpfx Ajhlnzkjdkjwc slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Single column eccentric press PELS - RICHTER type PEKR 125 Machine. No. 20684 Year of construction 1967 pressure force 125 ton. throat 430 mm table size 1100 x 750 mm Djdpfx Adofim Thokswc ram area 890 x 650 mm table opening Ø 400 mm stroke adjustment 6 to 115 mm ram adjustment 100 mm installation height largest stroke top max. 450 mm Clamping spigot bore Ø 50 mm Stroke rate 60 strokes/min. Table height above floor 900 mm motor power 7,5 kW Mains connection 380 Volt, 50 Hz - Overload protection by crushing plate in ram - Compressed air clutch-brake combination DESCH - ram weight balancing cylinder - manual ram adjustment - two-hand operation - cam gear - Grease central lubrication Vögele - stroke counter Space requirement L x W x H 2300 x 1450 x 3030 mm weight approx. 10 ton. good condition

Condition: used, Double-column punching press EBU - Eisenwerk Hensel Type HK 130 Z Eccentric punching press, eccentric press Mach. No. P 54096 / 96, built in 1996 Pressure force 130 tons Table size 1200 x 880 mm Stroke adjustment 8 to 140 mm Ram adjustment 100 mm Ram surface 1150 x 800 mm Table opening (support edge) 450 x 350 mm Table opening (through hole) 440 x 235 mm Column width 1200 mm Column width across 595 mm Installation height of maximum stroke of ram at TDC max. 510 mm (ram adjustment at top) Installation height of maximum stroke of ram at BDC max. 370 mm (ram adjustment at top) Stroke rate 40-120 strokes/min. Table height above floor: 900 mm Main drive motor power: 15 kW Hydraulic motor power: 2.2 kW Total current consumption: 40 amps Dwedpjwa D Npofx Adkoc Power supply: 400 volts, 50 Hz - Hydraulically operated multi-disk wet clutch and spring-loaded safety brake - Continuously adjustable drive via frequency converter (120 strokes at 80 Hz) - Hydraulic overload protection - Automated stroke adjustment - Motorized ram height adjustment with digital actual value display - Pneumatic, continuously adjustable ram weight counterbalance - Electrical cabinet adjacent (120 x 40 cm x height 220 cm) - Electric two-hand operation for stroke release - Movable Plexiglas safety door on the operator side, with pneumatic opening - Lubrication unit for circulating oil lubrication (fixed to the machine) - Hydraulic unit for the clutch-brake combination (fixed to the machine) Machine) - UNIDOR APS-Mini tool monitoring system, shown opposite - Operating instructions and documentation for the press available as PDF - Electrical circuit diagram available Included: EBU roller feed unit, type EVS 320 Order No.: ZT01054949 / 96, built in 1996 Strip width: 320 mm Strip thickness: max. 4 mm Strip cross-section: max. 1000 mm² - Feed control via the SIEMENS machine control system - Programmable feed path from the roller feed system - Control panel for feed system with Siemens S5 control system with OP 15, shown opposite Space requirement for press with feed system: L x W x H 380 x 180 x 375 cm Space requirement for control cabinet: L x W x H 125 x 41 x 200 cm, approx. 450 kg Transport dimensions of the machine with control cabinet and disassembled drive motor: L x W x H 400 x 230 x 343 cm Height with drive motor: 375 cm Height without drive motor: approx. 343 cm Weight: 18 tons Good condition

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Dwsdpfx Aju Rwa Ijdksc Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single column eccentric press WEINGARTEN type ERV 40 Machine No. 537 / 65 Year of construction 1965 Compressive force 40 ton. throat 230 mm table size 570 x 470 mm ram surface 250 x 200 mm clamping spigot bore Ø 40 mm installation height max. approx. 520 mm stroke adjustment 8 - 88 mm slide adjustment travel 63 mm Stroke rate 70 strokes per minute Drive power 3 kW Mains connection 380 Volt, 50 Hz - Table height adjustment - Overload protection by crushing plate Dwsdpfsffm Hhjx Adkjc - clutch-brake combination by WEINGARTEN friction thread clutch - electric 2-hand operation and foot switch - central lubrication via hand pump space requirement L x W x H 1600 x 1150 x 2300 mm weight approx. 2,6 ton.

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Dwjdpfx Adotx E Rqekoc Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch Dwodpfxev Uraao Adkjc - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Single column eccentric press MÜLLER GEFREES type PDET 5 S/EK Machine No. Year of construction 1988 pressure force 5 ton. throat 125 mm Dwodsik Srwepfx Adkjc head clearance 170 mm table area 280 x 220 mm waste hole Ø 90mm ram surface 160 x 100 mm stroke adjustment 4 to 40 mm ram adjustment 30 mm Installation height largest stroke top max. 210 mm Stroke rate 200 strokes/min. Clamping spigot bore Ø 25 mm Table height above floor 900 mm motor power 0,55 kW mains connection 380 volt, 50 Hz - pneumatic clutch-brake combination - electric foot switch - switch cabinet at the machine space requirement L x W x H 900 x 600 x 1700 mm weight 530 kg very good condition

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Dedoi A A Tbopfx Adkswc Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Single-column eccentric press RICHTER type PEKRS 80 Year of construction 1970 - overhaul 2024 Compressive force 80 ton. throat depth 350 mm Table size 900 x 650 mm Hole in the clamping table Ø 200 mm ram surface 700 x 500 mm Stroke rate 70 strokes/min. Stroke adjustment 6 - 100 mm ram adjustment 85 mm Installation height max. 400 Clamping pin bore Ø 50 mm Table height above floor 810 mm Motor power 8 kW Mains connection 400 Volt, 50 Hz - ORTLINGHAUS pneumatic clutch/brake combination - HERION XSz 32 press safety valve - Pneumatic ram compensation cylinder - Overload protection with breaker plate in ram - Central grease lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Dodpfx Aoi Db Ibjdkswc Technically overhauled and converted to the latest UVV with new electrics Control conversion in 05/2024 - suitable for manual insertion work - in accordance with DGUV Information 209-030 Press inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machine tools - Presses - Part 1: General safety requirements EN ISO 16092-2: Machine tools - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for rapid fault localization - New electrical cabinet, mounted on the side of the machine - completely based on SIEMENS, with PLC S7-1200 PROFIsafe and 7" TFT touch display - Two-hand control panel with emergency stop and engagement lock - el. foot switch - Cam switch unit with run monitor control - Stroke release via HERION XSz 32 press safety valve with pneumatic pressure compensator - New wiring of the machine - Updated operating instructions The machine is equipped with 6 operating modes: 1 = Set-up 2 = Single stroke two-handed 3 = Single stroke foot 4 = continuous run foot 5 = automatic continuous run 6 = reverse run

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level Dwsdpfx Adodzqltjkjc - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition