Used Edge Banding for sale (6,956)

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece Fedpoip Uzpjfx Ag Rsft →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with sanding unit for wooden, veneer, PVC, melamine, ABS edges – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchens, bathroom furniture, and various other applications Technical specifications: Min./max. panel height: 8–60 mm Panel height with corner rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness from coil: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical movement Panel support rail Sound-insulated safety enclosure Fluid inlets Components: Fsdpfxexnvr Aj Ag Rjft Anti-adhesive spraying unit with two nozzles – two tanks for anti-adhesion liquid Pre-milling units with two high-frequency motors – H64 mm diamond tools – diameter 100 mm, bore 30 mm, height 65 mm – copying set Gluing unit VC 560 for edge application on panels up to 60 mm – glue pot capacity: 1.5 kg – exchangeable glue pot End trimming unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, diameter 115 mm – front copying devices Tilting trimming/bevelling unit for removing top and bottom edge overhang – 2 motors at 0.55 kW – 12,000 rpm – tilt range from 0° to 25° – two-position pneumatic set for quick change between thin or radius edges Corner rounding unit with two motors on prismatic guides – for rounding and trimming thin or thick edges – 2 motors at 0.55 kW – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edges with rotary copying and extraction hood, scrap collection cassette Glue scraping unit – removes glue residues from the lower and upper panel surfaces Buffing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg Recently serviced New diamond pre-millers New copying wheels...

Condition: used, Year of construction: 2015, functionality: fully functional, total length: 7,920 mm, workpiece height (max.): 60 mm, warranty duration: 3 months, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15mm. Simple program changeover and tool adjustment via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet application system and glue cartridges. Changing PUR adhesive and cleaning the system is quick and easy within a few minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective film, such as high-gloss and supermatt surfaces! One of the true highlights of this machine is the multifunction package, which shows its strengths in companies processing a wide variety of edges. The DIA tools are constructed in multiple stages and can switch between radii and bevels as needed – from the longitudinal milling unit to corner copying and the profile scraper. The pull-out workpiece support and the extended infeed area facilitate processing of large workpieces, and a guide system assists in feeding small parts into the machine. Edging thickness (coil material): 0.4 – 3 mm (depending on material) Edging thickness (strips): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR, with minimal effort required. All common edge types, including high-gloss, supermatt, and solid wood edges up to 15mm. iTronic – pressure and glue quantity control Ffsdjx Emf Depfx Ag Ret Prepared for connection to a RETURN system Motorized pressure bridge with upper belt drive Multifunction units for rapid changeover between radius, flush, and bevel processing Vertical & horizontal spray systems and much more.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, working height: 900 mm, space requirement height: 1,400 mm, space requirement length: 4,050 mm, space requirement width: 1,300 mm, operating pressure: 7 bar, with PLC control system (including touchscreen) and hot-melt adhesive application to the workpiece for edge materials up to 3 mm: joining cutter (including DIA tool), up to 2 mm cutting depth (max. 1 mm for special materials such as multiplex), maintenance-free glue pot with quick-change pot preparation including glue discharge device, HF trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combined version), corner round milling unit, surface scraper (including pneumatic lift), robust chain feed, ball-bearing double roller upper pressure, viewing window from machine rear side, extendable workpiece support, feed rate approx. 10 m/min. Complete with quick-change set-up for corner milling unit, radius scraper (including pneumatic lift), chassis F 4 – Technical Specifications Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Ffsdpox E N Nfsfx Ag Rjt Feed speed: 7 m / min Ready for operation: approx. 3.5 min Max. power consumption: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Worktable height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction port: ∅ 1 x 140 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Ffjdpfx Aoxtfchog Rot Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm MACHINE DETAILS Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Ffodpfx Agoxrr Uzo Ret Available from stock in Lieboch

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – Fedpfx Agjd R U Acj Reft 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets Fjdpfsgipk Ajx Ag Reft for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Fedpfjxugplsx Ag Rjft Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: new, Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Ffjdpfxexv Udae Ag Rst Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg Price 11200 Eur (EXW Jonava, Lithuania)

Year of construction: 2016, condition: good (used), functionality: fully functional, The KS AluKap Duo is a machine designed for the production of aluminium profiles for roller shutters with interlocked curtain slats. It automatically cuts the profiles to the required length, assembles them into a curtain, and secures them. A key function of this machine is its capability to perform several operations simultaneously: cutting profiles to size, joining them to form the roller shutter curtain, and locking (interlocking) to prevent shifting after installation. Electrical connection: 3.5 kW, 400 V, 50 Hz. Shutter width: min. 500 mm – max. 3,500 mm. Label printing (optional): 36 x 89 mm. Machine transport is the buyer’s responsibility. We offer assistance with loading. Ffodpfx Asw Dm Hrjg Ret

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° angle of the miter saws milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° corner copying unit - 3 mm edge thickness scraping unit for chamfers and radii with 2 scraping blade holders surface scraping unit - finish spraying device - PU Ffedexqa Iyepfx Ag Rst machine with all processing tools machine is WORKSHOP TESTED in TOP CONDITION

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen Fsdjd R U Adjpfx Ag Roft →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 67641340e9686

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Fjdpowkbd Esfx Ag Roft Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Year of manufacture: 1992 Ffedpox Avcdjfx Ag Rot For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling unit material removal: 0 - 2 mm plastic edges: 0,4 - 3 mm solid wood edges: 0,5 - 5 mm Workpiece thickness: 8 - 50 mm Minimum length of workpiece: 120 mm Min. work piece width: 110 mm Anti-adhesive spraying unit: yes Edge preheating device: yes / with ceramic infrared lamp Bonding unit: granulat / Glue container quick-change kit Jack knife: yes Flush trimming unit: yes Corner copy unit: yes Flush radius milling unit: yes Ffjdpol D Rx Uofx Ag Rjt Radius scraper unit: yes Area scraper unit: yes Buffing unit: yes Cleaning spray unit: yes motor power: 5 kW machine length: 3774mm machine width: 1546 mm machine height: 1337mm weight: 842 kg

Condition: like new (used), Year of construction: 2022, - TOP condition (as new) - 21" SMART-Touch - Panel thickness: 8 - 60 mm - Edgebanding tape thickness: 0.4 - 3 mm - Solid edging: 0.8 - 12 mm - Guillotine shears for tape material up to 3 mm - Minimum workpiece length: 140 mm - Feed speed: 12 m/min - Automatic lubrication for feed chain and guideways - Pneumatically controlled infeed stop for workpiece spacing - Upper pressure unit motor-adjustable via PLC with double-row smooth upper pressure rollers - Segmented, rubberized support pads on the transport chain with quick-change system - Motorized infeed fence adjustable to jointing dimensions via PLC - Extendable workpiece support - Jointing unit with plunge-controlled milling, 2 x 2.2 kW - Jointing cutter D=80 mm, SB=64 mm with DIA indexable inserts - Teflon-coated gluing unit with synchronized glue roller, switchable for with/against feed direction, suitable for processing EVA and PUR adhesives - Pneumatically controlled pressure unit with 1 driven pressure roller and 2 conical follow-up rollers Fjdpfx Ajx A E Hlog Rjft - Edge thickness adjustment via PLC - End trimming unit with 2 motors - Flush/chamfer/radius milling unit (top/bottom) with position control via PLC - Corner rounding unit with motorized adjustment for post and soft-forming profiles, operation-controlled - Radius scraper unit R2/R3 - Surface scraper unit, pneumatically controlled with nesting execution - Buffing unit - Separator agent spraying - Sliding agent spraying - Cleaning agent spraying

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 4-axis CNC machining center with console table and edge banding unit Manufacturer: IMA Model: BIMA 400 V Fedpjxrltkefx Ag Rsft Year of manufacture: 2009 8 manually adjustable supports in X-axis, 3 vacuum pods per console, Vacuum pump 100 m³/h -2* Vacuum connection for templates LED display for pod position indication Working area X: 200 – 6150 mm Working area Y: 0 – 1600 mm (milling/drilling), with edge banding 1525 mm Working area Z: 12 – 125 mm (clearance 150 mm) 14 vertical drilling spindles Horizontal drilling and grooving saw unit, swiveling 90° Milling spindle 11 kW / 7.5 kW up to 24,000 rpm With C-axis, 360° interpolation, liquid circulation cooling – 18-position tool changer, traveling with y-support Edge banding unit VT 100, 4-sided/all-round – rotation range 740 degrees With dual roller magazine, automatic granulate feeding Adapter units: – Saw, fixed at 90° – 5-axis saw/drill/milling unit Vario NC – Horizontal cutter (corner notching) – Flush trimming and profile scraping blade with extension for flat scraper ICOS open control system with 17" TFT ImaWop 6.0 incl. MDE and production list software Chip conveyor Side safety fencing and front safety mats; Rear: requires wall placement or separate safeguarding

Condition: ready for operation (used), IM Very good condition. Ffsdpfxovunm Ae Ag Ret

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Ffsdpfxov Sv Ene Ag Rjt Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2007, machine/vehicle number: Werksüberarbeitungsnummer: WÜA1363DK-F7560, Used Machine GM020.0068 AKV 3003 DK - F Year of manufacture: 2007 Specification: 3 mm 1st milling station: Combination Surface pull scraper with extraction Chassis Fodpfx Agew Nih Is Reft Pneumatic milling adjustment Limit switch lever, 7.5° inclination

Condition: new, Year of construction: 2025, Gluing unit: Yes Edge thickness: maximum 3 mm Workpiece thickness: 8 mm - 50 mm Workpiece width: min. 110 mm Glue pot: granulate, quick-change pot End trimming shears: yes End trimming / flush cutting: yes Milling station: chamfer / radius Flat scraper blade: yes Radius scraper blade: yes Infeed fence adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Machine width: 1085 mm Ffedpfx Asxrbibsg Rot Weight: 623 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 2459, Machine in very good condition - Very user-friendly control panel - Minimum workpiece width approx. 80 mm - Minimum workpiece length approx. 200 mm - Feed rate approx. 10 m/min - Transport chain with firmly bolted special chain plates - Double roller top pressure - Machine length 4,300 mm - Machine width 1,400 mm Ffsdjx Ahmuspfx Ag Rot - Weight approx. 1,250 kg - Extendable workpiece support at the front - Automatic central lubrication for cross-cut saw & corner milling unit - Melt glue container with Teflon coating (very low maintenance) - Ready for operation after approx. 5-6 minutes - Jointing unit - Pneumatic trim roller cutter - Direct glue application to the workpiece - Trimming unit for front & rear edges - Flush/chamfer/radius milling unit - Corner rounding - Surface scraper with dual sensing

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Ffedpfx Agoxgrfpe Rot Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Fsdpfxjwka S Ie Ag Rjft Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim