Used Edgebanding for sale (782)

Condition: used, Year of construction: 2012, Edge banding machine Manufacturer: Homag Type: KAL 211 Year of manufacture: 2012 Technical data Feed rate: 18-25 m/min; with FK11 max. 20 m/min Working height: approx. 950 mm Machine length: approx. 7,845 mm Workpiece thickness: 12-40 mm standard; version up to 60 mm Edge material roll: approx. 0.3-3 mm Edge material strip: approx. 0.4-6 mm Roll diameter: max. 830 mm Pneumatics: 6 bar, Electrical: 400 V / 230 V, 3 phases, 50 Hz Units / Equipment - Release agent spray unit top/bottom Hedpfx As Af Ip Djirew - Joining milling unit - Gluing unit - 2-roll edge magazine - Pressure zone - Trimming unit HL81 - Pre-milling unit BF10 - Profile milling unit FK11 - Profile drawing blade PN10 - Finishing unit with glue joint drawing blade and buffing unit - Preparation for HOMAG 1 laserTec - powerControl PC22 with touchscreen - Automation packages - In addition, drawing blades for both 2mm and 1mm edges are available. PUR retrofit 2023 In 2023, the machine was retrofitted with a PUR gluing system from GP Service, type EasyPUR AC 34, as well as a RIEPE spray system, type LP289/99 24 V. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 1998, For sale: a Polymac Rubber veneer machine, lightly used, in like-new condition. Hjdpfez Sb T Tsx Airjw

Condition: excellent (used), Year of construction: 2013, Brandt Highflex KDF 220 edge banding machine with joining, corner copying, and two trimming blades. Very highly automated. A video of the machine in operation can be sent upon request. Hsdpfxezzqwmj Airsw Edge thickness: approx. 0.4 - 3 mm, solid edge up to 6 mm Workpiece height: approx. 10 - 60 mm Feed rate: approx. 10 m/min Noise protection hood Retractable workpiece support Dust extraction connection: 1x120mm, 1x100mm, 3x80mm Easy-Touch EC+ control panel for easy machine operation 4 programs can be saved. Machine in Highflex version, highly automated, switching between thin and thick edges via programs. Units: Extended infeed zone Chain track central lubrication, pneumatically manual Glue pot quick-change device, currently one glue pot available Top pressure: manual adjustment, PU rollers Infeed guide: manual adjustment with SIKO counter for chip removal Joining cutter with diamond cutters, sharpened Contact heating plate for preheating the panel Gluing section with automatic edge infeed for roll material up to 3 mm, switchable for direct and reverse operation Pressure zone with 3 rollers, pneumatic adjustment between thin and thick edges Cut-off saw with 2 motors, straight or bevel cuts (program-controlled) Combination routing unit, pneumatically controlled for flush trimming, chamfering, and radius Corner rounding cutter R2 with diamond cutter with integrated sensing ring Radius trimming blade R2, pneumatically retractable with quick-change device Glue seam trimming blade with large roller, pneumatically controlled Hood locking CE marking All indexable inserts of the routing units and trimming blades have been replaced or resharpened, saws have been sharpened, and diamond joining cutters have been sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the shaping cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Unfortunately, the machine does not have an operating hour counter, but it still looks very good. Very good condition, see original photos. Machine dimensions: approx. 4550 x 1250 x 1550 mm (LxWxH) Weight: approx. 1400 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: good (used), Year of construction: 1994, workpiece height (max.): 60 mm, feed rate X-axis: 11 m/min, total length: 4,800 mm, overall weight: 1,000 kg, Edge bander HolzHer, model 1437 SE, very well equipped; cartridge adhesive station, flush trimming with two milling units, radius R=3mm, two additional units available for exchange, profile trimming, chamfering. Hjdpfozzz Aaox Airjw

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Hjdez Hb Hmopfx Airjw Location: Customer.

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on. Hodozvb Uxjpfx Airew

Condition: used, Year of construction: 2001, Edge banding machine BIESSE ARTECH Ergho 3 - Manufacturer: Biesse - Type: ARTECH Ergho 3 - Year of manufacture: 2001 - Edge banding and edge magazine CB-700 - Flush trimming unit IN-701 Cut and wrap adjustable from 0-3.6-11-15 degrees with 12,000 RPM. - Flush milling unit RI-700 Hjdpj Agwd Dofx Airsw - Chamfer milling unit SI 700 - Surface scraper blade RBK-501 - Buffing unit - Working height approx. 900 mm - Workpiece thickness 10 - 50 mm - Workpiece width min. 50 mm - Workpiece length min. 150 mm - Edge thickness (roll material) 0.4 - 3 mm - Edge thickness (strip material) 0.4 - 15 mm - Edge width 13 - 55 mm - Feed rate 10 m/min - Electrical supply 400 V - 50 Hz - Connected power 6 kW - Compressed air connection 6 bar - Extraction 1 x D = 80 mm - Overall length of the machine approx. 4080 mm - Weight 1640 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Hjdpfxjzzcc Ie Airow Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: used, Year of construction: 2008, machine/vehicle number: 654/08, functionality: fully functional, Used automatic edge bander with pre-milling unit. Robust machine designed especially for solid wood edges and lippings. - Control via LCD touch panel - Heavy-duty chain feed conveyor Hsdpfx Aeu T Nhmsirew - Automatic thin edge feeding from magazine - Solid edge magazine - Pre-milling of panels using 2 cutter heads (with insert knives) - Glue preheating in a separate tank - Reinforced pressure zone with 5 pressure rollers - End trimming with 2 saw blades - Top and bottom trimming Technical data: - Min./Max. edge height: 14 / 104 mm - Min. edge thickness: 0.4 mm - Min./Max. panel thickness: 10 / 100 mm - Feed speed: 12 m/min - Min. working length/width: 200 / 85 mm - Milling tool speed: 12,000 rpm - Dimensions: 5250 x 1100 x 1650 mm - Weight: 2000 kg The machine has been used and tested. It is operational but requires maintenance, cleaning, adjustment, and sharpening of the tools. Sold in its current condition.

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. Hodpfx Aioznwyzerjw The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Questions are welcome.

Condition: good (used), Code: 0688 Brand: FRAVOL Model: A 16/S Edgebander for straight and shaped panels, for wood edges, veneer, Pvc, plastic laminate, etc. Technical data: Hedo Afnplspfx Airew Edge height mm 10/60 Edge thickness mm 0,4 - 1,2 Min edging radius mm 20 Power Watt 2500 Shear for roll cutting Compressed air 5 atm Overall dimensions mm 1300 x 1000 x 1100 h Weight kg 260

Condition: used, Year of construction: 2018, functionality: fully functional, Felder A 951L surface planer Hedpfx Aie Aaz I Rorsw Year of manufacture: 2018 Location: Freising Inspection is welcome. Sale to the highest bidder. We have other used machines available. Please contact us.

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor Hodoz E S E Ropfx Airjw - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, Year of construction: 2018, functionality: fully functional, Edge banding machine, Format 4 Tempora F600, Type 60.06L with Smart-Touch control. Year of manufacture: 2018 Hedpfx Ae Aaz N Usirjw Location: Freising Inspection is welcome. Sale to the highest bidder. We have other used machines available. Please contact us.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 0-261-03-6806, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: pneumatic, total height: 1,610 mm, total length: 4,000 mm, total width: 1,680 mm, overall weight: 1,000 kg, Equipment: documentation/manual, The Brandt edge banding machine has provided excellent service for 30 years in a small business and is now to be passed on to new owners. Hedpsz Db N Njfx Airsw

Condition: good (used), Code: 0510 Brand: BIESSE Model: POLYMAC SINGLE 89 - N - CE Standard Edgebander for straight, shaped, and round panels, for Pvc, Abs, veneer, and wood edges, for woodworking shops, custom furniture, furniture, kitchens, shelves, and various applications - CE Standard Features: Motorized feeder with adjustable speed Pneumatic trimming unit for trimming edged panels Digital electronic counter for setting the desired cutting length Work surface tilting from 0 to 45° Adjustable edge feed speed Technical Data: Edge height 10-60 mm Edge thickness 0,4-3 mm Min radius 20 mm Min panel length 300 mm Feed speed 2-18 mt/min Total power 4 Kw Compressed air 6 bar Hsdpfx Aij Agcf Rorjw Overall dimensions mm 1700 x 950 x 1300 h Weight kg 350

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Hjdpfjzylv Iex Airew Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 0-261-07-1735, functionality: fully functional, operating hours: 4,600 h, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 14 m/min, total height: 2,100 mm, total length: 6,900 mm, total width: 1,200 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Name: BRANDT KDF 670 Highflex – edge banding machine Manufacturer: BRANDT Type: KDF 670 Highflex Year of manufacture: 2005 Machine available from: 2026-11-20 Machine condition: good Hedps Adzmzjfx Airew Location: Kielce, Poland Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Feed rate: 14 m/min Pre-milling unit: 2 x 2.2 KW Gluing unit: Quickmelt Edge magazine: for 1 roll Trimming unit: 2 x 0.35 KW Rough milling unit: 2 x 0.55 KW Profile milling unit: 2 x 0.55 KW Corner milling unit (copying): 2 x 0.35 KW Flat scraper (glue scraper): yes Radius scraper (profile scraper): yes Polisher: yes Control: PC16 Total power approx.: 15 KW Overall dimensions approx. (L x W x H): 6900 x 1150 x 2050 mm Weight approx.: 3500 kg Features: Software-controlled adjustment of the infeed fence Extension of the infeed fence by 300 mm Motorized adjustment of the upper pressure roller height Software-controlled adjustment of the pressure zone Automatic edge feeding Anti-adhesive spray Pneumatic adjustment for trimming at an angle/straight Pneumatic adjustment of the milling unit Software-controlled adjustment for edge thickness The machine has operated for very few hours – approximately 4600 (the computer disk was replaced after 2600 operating hours)

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: 919/2-602, functionality: fully functional, operating hours: 7 h, Equipment: CE marking, documentation/manual, HOLZ-HER, STREAMER 1057 XL Classic, year of manufacture 2026, showroom machine for sale. Technical data Machine type: Edge banding machine Model: HOLZ-HER STREAMER 1057XL classic Edge thickness, roll material: 0.4 – 3 mm Edge thickness, strip material: 0.4 – 6 mm Edge height: max. 65 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Workpiece length: min. 160 mm Feed rate: 10 m/min Voltage / Frequency: 400 V / 50 Hz Machine configuration & equipment Control system: Edge Control BC 15 with 15.6" touchscreen (color display 16:9, network-enabled, password-protected) Setup system: VISE (Visual Setting Mode) – digital logbook for setting values and digital counter Infeed area: Retractable workpiece support (distance 600 mm) Long infeed fence (1252 mm) BS501 guide system for right-angled feeding of narrow parts Jointing unit: FG201 with 2 milling heads (co-rotating/counter-rotating), incl. diamond-tipped milling cutters (Ø~70×48×30 mm) and Air Stream system Edge feeder: MG301 for roll and strip material with support plate (Ø~820 mm) Glue application system: Glu Jet GJ301 (hybrid technology for EVA and PUR adhesives in cartridges and as granules, fast heating within 3 minutes, automatic regulation of glue height and automatic refill function) Pressing unit: DW201 pneumatic (1 driven roller, 2 conical pressure rollers) Trimming unit: KA501 pneumatic (2×0.45 kW, pneumatically swiveling 0 - 10°) Multi-function milling unit: FR201 (2×0.6 kW) Profile milling unit: FF201 (1×0.35 kW) Hedpfx Ao Agnlleirsw Finishing: Scraping unit ZK301 (with 2 supports and digital displays) Surface scraping blade FK702 Lighting: LED lights (3 pcs) for the infeed and processing area

Condition: used, Year of construction: 2007, Used Automatic Edgebander for sale! Manufacturer: SCM Model: Olimpic K1000 Year of manufacture: 2007 Status: dismantled and ready for transportation immediately! Location: Lithuania Equipment and technical specifications Edgeband thickness max 8 mm Panel thickness max 50 mm Hsdpfsya Tv Rex Airew Thickness of coiled edgeband max 3 mm Workpiece length min 65 mm Feedrate max 18 m/min

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Hodpjz Hbqljfx Airow Surface scraper blade: Yes Buffing unit: Yes

Condition: good (used), Year of construction: 2002, overall weight: 600 kg, Equipment: CE marking, documentation/manual, For sale: a used Hebrock EURO 2000 edge banding machine. Equipment: +Cutting unit +Routing unit for radius and chamfer +Digitally controlled glue temperature +Automatic feed +Adjustable workpiece pressure +Extendable workpiece support +Control panel with separate selection of units +Operating manual and machine documentation available Technical data: +Year of manufacture: 2002 +Machine no.: 4868 +Connection power: 7.0 kW +Voltage: 230/400 V +Frequency: 50 Hz Hjdpfx Aiez Hy A Horow +Current draw: 13.6 A Inspection and test run possible by prior arrangement. Invoice with VAT shown. Subject to prior sale and errors.

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, power: 7.5 kW (10.20 HP), type of input current: three-phase, actuation type: electric, total height: 1,400 mm, total length: 5,200 mm, total width: 1,400 mm, overall weight: 1,500 kg, year of last overhaul: 2021, Edge gluing from 0.6 to 13 mm Cartridge gluing Pre-milling Hjdpfx Ajz A Dhreirew Fine milling Cutting twice Pull knife Smoothing Year of manufacture is estimated Machine was stored a year ago Until that time, it was fully functional.

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: KK00054470, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 612 kg, Equipment: CE marking, documentation/manual, SCM Minimax me 35 TR edge banding machine in CE version, manufactured in 2026. Equipped with a glue scraping unit with an automatic on/off system, a scraper with an automatic on/off system, a sawing unit with an automatic on/off system, internal machine lighting, an infrared lamp, and nesting copier kits for the routing unit and the band scraper. Hsdpfxo Agniuj Airsw

Condition: used, Year of construction: 2007, Workpiece thickness: 8 - 50 mm Hedpfx Ae Agli Nsirew Edge thickness: 0.4 - 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Connected load: 10.5 kW Compressed air: 6 bar Weight: approx. 1250 kg Machine length: 3920 mm Storage location: Supplier