Used Edgebanding for sale (1,013)

Condition: used, machine/vehicle number: 008040, Position 1: Panel Feeding and Loading HOMAG-PROFI KAR610/20/L/30/WZ Isdpow Ida Asfx Ab Ija Position 2: Single Edgebanders HOMAG-PROFI KAR610/20/L/30/WZ Position 3: Robot HOMAG-PROFI KAR610/20/L/30/WZ

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard Iodpfsxn Hzbjx Ab Ioa

Condition: ready for operation (used), IM Very good condition. Iedpfjvunm Asx Ab Isa

Condition: excellent (used), Year of construction: 2012, Brand KDF110 Optimat Ambition - only 1150 hours Brand: Brandt Model: KDF 110 Year of manufacture: 2012 M-Nr.: 0-261-20-6960 Control system: Easy Control 10+ contactless line control, feed-regulated with start-stop optical-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers / product guidance: Central control, 2 roller tracks Jointing milling unit: 2 x 0.75 kW, 200 Hz including jointing cutter set in DIA version with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing station for hotmelt glue with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control unit Pressure zone: First roller driven and 2 free-running rollers for excellent and consistent compression End trimming unit: 0.18 kW, 12,000 rpm Profile milling unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counterrotation, 3-position adjustment chamfer/radius (R2), overhang and straight, max. 3 mm edge thickness with Siko counter Profile scraper: Max. 3 mm edge thickness Surface scraper: Reversible blade Ijdpfx Ajxvirfeb Iea Chain width: 80 mm Edge material in rolls: 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Minimum workpiece width: • For workpiece thickness 8–22 mm: 70 mm • For workpiece thickness 23–40 mm: 120 mm (Depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Overall length: 3,672 mm Location: ex stock 54634 Bitburg - Immediately available -

Operating hours: 7 h, condition: as good as new (ex-display), functionality: fully functional, Micro-stationary system for the production of a zero joint - jointless optics as if from a single casting A machining table is also available as an option - Heating time:ᐸ30Sekunden - max. edge height 65mm (option 103mm), max. edge thickness 3mm - Processing of so-called "laser edges" (co-extruded and post-coated edges, as well as old-classically pre-coated EVA hot-melt adhesive edges) - higher heat resistance and water resistance - perfectly straight, inclined, curved and round panel materials as well as moulded parts can be processed. Iodjd St R Sjpfx Ab Isa - sloping cut surfaces of up to 55° (installation in the available table) - high process reliability & lower follow-up costs; - no glue change necessary = almost no set-up costs; - no burning of the glue; - no glue residue on the workpiece - Infinitely variable feed speed from 1 to 5.5 m/min. - continuously adjustable hot air up to 520°C - 230VoltAC, 4m connection cable, compressed air hose - 3,05kW - low air requirement, assembly compressor is sufficient The zero joint unit can be used mobile as well as micro-stationary! Optimal e.g. for larger moulded parts and for use on the construction site. For this purpose, a Systainer with an additional supply line for electricity and compressed air is included in the scope of delivery. The system is also available for retrofitting in an edge banding machine (Hot air, Airtec) - please ask us

Condition: excellent (used), SCM K201 HF edgebanding machine Glue tank (granulate) Isdpfxotqu Nio Ab Isa Pre-cutting guillotine Pre-cutting saw 2 top/bottom edgebanding units 2 up/down polishing units

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Isdpfxewka Nye Ab Ioa Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: excellent (used), Edge banding machine Artech Akron 420 Glue application by roller, Pneumatic pre-cut guillotine, Isdpexw Uzzjfx Ab Ija Pressure rollers, Finishing trim saws, Milling units R1, R2, Profile scraper, Condition: very good

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system (return system is not included) - Year 2019 Iedpfxjv A H Ubs Ab Ija - good condition - NC motors, all adjustable from PC control - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system • Scissors • Pressure zone 3 rollers • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer • Edge scraping unit • Glue scraping

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: M/53056, total length: 9,800 mm, overall weight: 4,500 kg, compressed air connection: 6 bar, input voltage: 400 V, input frequency: 50 Hz, Single-sided edge banding machine in right-hand configuration - with jointing unit - gluing unit - double end cutting unit - flush trimming, chamfering, and radius milling unit - corner rounding unit - scraper and edge buffing unit with high-performance automation - pressure zone with one driven roller and six follow-up rollers - automatic edge thickness adjustment for all units - automated chamfer thickness adjustment of the top pressure to panel thickness - pneumatic engagement/disengagement of all processing units with monitoring - Machine in CE-compliant design with complete encapsulation of processing zones by high-quality noise protection hoods. Machine length: 9,800 mm Machine weight: 4,500 kg Gluing unit - for hot-melt adhesive granules - with quick heating tank, preheating time: 6 minutes - electronic temperature control - adhesive application roller (no adjustment required for different material heights) - operates in both co- and counter-rotation, automatically activated via program control Edge thickness: 0.2 - 20 mm Workpiece dimensions: Minimum width: 60 mm Minimum height: 8 mm Maximum height: 60 mm Minimum length: 160 mm for strip edges / 60 mm for continuous roll edges / 150 mm with double end cutting unit Workpiece transport - heavy-duty chain conveyor with precision sliding guides for chain support plates with flat and round guide rails to ensure positive workpiece transport Iodexy Sizspfx Ab Ioa - feed speed: 12 - 20 m/min, adjustable via electronic frequency inverter from the central control panel, values can be saved in work programs - motor power: 5.5 kW Panel thickness adjustment Motorized adjustment of double roller top pressure, preselection via the central control panel, values can be saved in work programs Edge thickness adjustment - automatic positioning of all edge thickness-related units including the pressure zone, preselection via the central control panel, values can be saved in work programs Machine control - central control panel - PLC and line control for contactless control of the processing units Central control panel - for flexible and easy operation of the edge banding machine, with a specifically developed user interface for clear and rapid access to all important machine and unit statuses - intuitive menu navigation via two-line text display, supported by clearly arranged symbols with two-color LED status indicators PLC - high-performance PLC to industrial standards for fast and efficient interaction with the machine and for controlling all functional groups and line control Line control - high-resolution line control of all processing units with +/- 1mm accuracy over the full machine length - complete access via the control panel for all program-controlled processing units - values can be saved in various work programs EFU - electronic frequency inverter Connections Electrical: 3 x 400 V, 50 Hz, rated current 42 A, protection: 50 ampere, supply: 5-core, 5 x 10 mm², control voltage: 24 V Extraction: 1 x 120 mm, 1 x 160 mm, 1 x 120 mm, extraction air velocity: min. 20 m/sec, required capacity: approx. 65 m³/min Compressed air: 6 bar, 1/4" - consumption approx. 300 l/min, required minimum pressure: 4.5 bar, all workpiece blow-off lines are line-controlled.

Condition: used, Year of construction: 2024, functionality: fully functional, One-sided edge banding machine with NC-controlled adjustment via 18-inch touchscreen (L-Motion) Edge material: - Roll stock 0.4 - 3 mm - Solid wood strips up to 5 mm Workpiece thickness: 10 - 60 mm Minimum workpiece length: 120 mm Minimum workpiece width: 75 mm Minimum workpiece width with corner copying: 170 mm Feed speed: 16 m/min With corner copying: for thicknesses 16, 18 & 19 mm, feed speed 12 m/min Aggregate equipment: RIEPE separating agent application Jointing milling unit with 2 counter-rotating, demand-controlled motors, equipped with diamond-tipped spiral cutterheads Extra: Diamond milling tools, 65 mm height instead of 30 mm Automatic edge feeding with swiveling reel table, diameter 800 mm, with automatic strip magazine, spiked roller for solid wood strips Glue pot with automatic temperature control and stand-by function; glue roller temperature adjustable separately, capacity approx. 1.5 kg Extra: Glue run-out function, Teflon-coated drip tray, customized software for EVA/PU glue Extra: Quick-change glue pot system Pressure zone with 1 powered main pressure roller and 2 free-running follow-on rollers End trimming unit with 2 HF motors, 0.55 kW, pneumatically tiltable 0 - 10 degrees, controlled from the operator panel Combined milling station with 2 HF motors, 0.55 kW, 12,000 rpm L-Motion multifunction tool (straight & 3 different radii), horizontal & vertical tracing, motorized positioning via controller Extra: nesting package for combined milling unit Corner copying milling unit with 2 motors. Automatic processing of end edges up to 2 mm edge thickness (not recommended for soft- & postforming profiles) with 2 motors, 0.27 kW each 2 L-Motion motors for positioning the horizontal tracing shoes, plus tool positioning Radius scraper with L-Motion multifunction tool (3 different radii), motorized adjustment with 3 L-Motion motors Extra: nesting package for radius scraper Flat scraper unit with pneumatic in/out control from the operator panel RIEPE cleaning agent spray device Buffing unit with 2 motors, 0.09 kW each Control system: 18.5-inch graphic touchscreen with L-Motion software Extra: potential-free contact for connection to a return conveyor Total machine length: 4,890 mm The machine is being replaced due to insufficient capacity Ijdpexugplsfx Ab Isa The return conveyor system visible in the photos is not included in the scope of delivery.

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) Iodpfx Abovtl Tqs Ioa - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Year of construction: 2010, General Data Isdpsxxndljfx Ab Iea Measurements depth 7845 mm Machine weight 5000 kg Additional Equipment HOMAG gluing and finishing components This HOMAG KAL 210 AMBITION 2264 edgebander was manufactured in 2010. It features a max glued edge thickness of 20 mm, edge gluing height up to 60 mm, and a max feed speed of 25 m/min. Equipped with a granulate glue system, preheating zone, and various processing units including a joint trimming and corner rounding unit. Consider the opportunity to buy this HOMAG KAL 210 AMBITION 2264 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0 - 251 - 20 - 4507, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Isdpfx Aoxzp Uwsb Isa

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit Iedpfsxwuryox Ab Isa - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: new, feed rate X-axis: 7 m/min, workpiece height (max.): 50 mm, type of input current: three-phase, input voltage: 400 V, With corner copying, suitable for plastic edges from 0.4 - 3 mm, solid wood edges up to 3 mm, and workpieces from 8 - 50 mm, with pneumatic adjustment. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Premium equipment for high productivity with minimal space requirements! Intuitive operation with eye-S control and 10" large touchscreen: HMI Maestro Active Edge; graphical representation of all processing units and their operating status; graphical simulation of operations; control of all processing units; regulation of glue pot temperature; assistant functions for machine setup according to the processing program; error diagnosis for quick resolution of simple faults; statistics on processing parameters; USB connection; network connectivity ready; prepared for Industry 4.0 with API REST data transfer protocol. Outstanding accessibility to work units thanks to the large hood, which also provides protection and noise reduction Monoblock steel construction ensures high stability and rigidity of the machine Automatic unit positioning when changing panel thickness Cut-off saw unit with corner rounding (me 35 tr s): for trimming the edge and rounding corners on the top and bottom; for edging solid wood, trimming is done with the radius milling cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber sliding shoes Extendable workpiece support Adjustment of infeed fence via spacer plates Dimensions and Weights Length (product) approx. 3314mm Width/depth (product) approx. 1085mm Height (product) approx. 1300mm Weight (net) approx. 623kg Flush radius milling unit Rated output: 2 x 0.35kW Cutter diameter: HW55.3mm Spindle speed: 12000min⁻¹ Extraction port diameter: 60mm Number of extraction ports: 2 Ijdpfx Aexxvaneb Ija Corner copying unit Rated output: 0.35kW Tool diameter: 58mm Speed: 12000min⁻¹ Electrical data Connection voltage: 400V Mains frequency: 50Hz Glue unit Glue pot rated output: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5bar Air consumption: 470l/min Feed Feed rated output: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4 – 3.0mm Pre-milling unit Extraction port diameter: 2 x 80mm Rated output: 3kW Cutter speed: 7200min⁻¹ Diamond cutter diameter: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Rated output: 2 x 0.14kW Speed: 2800min⁻¹ Workpiece Workpiece thickness: 8 – 50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness 0.4 - 6 mm Modern control with selector switch for adjusting the units Pre-milling unit for attaching before the gluing part Fully automatic edge magazine for rolls and strips Glue application station GLU-JET cartridges + PU gluing Glue application using nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller printing unit, 1st roller motorized Cutting unit pneumatic. for rolls and strips up to 6 mm edge thickness with pneumatic adjustment of 0-10° angle of the miter saws milling unit, flush milling 6 mm, radius milling - chamfer milling - 15° corner copying unit - 3 mm edge thickness scraping unit for chamfers and radii with 2 scraping blade holders surface scraping unit - finish spraying device - PU Iodpfx Absxqa Iyj Ioa machine with all processing tools machine is WORKSHOP TESTED in TOP CONDITION

Condition: like new (used), Year of construction: 2021, operating hours: 15 h, Edge banding machine FORMAT 4 Tempora F600 / 60.06 ELX - as new Iedpfxjwq A Ewe Ab Ija - only used briefly and now for sale due to production closure - immediately available

Condition: ready for operation (used), Year of construction: 2013, Main Drive Spindle speed range 12000 rpm Iodpsxr Rxlofx Ab Ioa This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Application Types Edge Banding

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed Iedpfjwkbd Esx Ab Ioa - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Condition: excellent (used), functionality: fully functional, Equipment: double-sided, Additional equipment: Separating agent spray device, top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 – 2 rollers / Profile Trimming Unit FF12, top/bottom, with motors at 12,000 rpm / Finish Unit FA11, top/bottom / Stepless stop cams with a maximum cam projection of 25 mm / Standard Trimming Unit SF20, 6.6 kW / Rough Trimming Unit, 0.55 kW PUR OTT 2 kg Melting Station Machine Benefits Technical Advantages Workpiece thickness: 12–40 mm / Minimum workpiece size (LxW): 250 x 240 mm / Maximum workpiece size (LxW): 2,500 x 1,200 mm / Maximum workpiece weight: 50 kg Coil material edge thickness: 0.4–3 mm / Maximum edge cross-section (plastic): 135 mm² / Maximum edge cross-section (veneer): 100 mm² / Maximum coil diameter: 830 mm Longitudinal feed speed: up to 35 m/min for thin edge (up to 0.6 mm) / up to 30 m/min for thick edge (up to 3 mm) Cross feed speed: up to 30 m/min for panel sizing / up to 20 m/min for edge processing Minimum workpiece gap: 500 mm Iodpfxjxwui Eo Ab Iea

Condition: new, Year of construction: 2023, functionality: fully functional, total length: 3,774 mm, edge thickness (max.): 3 mm, overall weight: 842 kg, plate height: 50 mm, For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm, and workpieces from 8 - 50 mm. Panel thickness: 8 – 50 mm Edge thickness: 0.4-3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top configuration for high productivity in a compact footprint! Intuitive operation with the eye-S control and 10” large touchscreen: HMI Maestro Active Edge Graphic display of all processing units and their operating status Graphical simulation of machining operations Control of all processing units Regulation of glue pot temperature Assistance functions for machine setup according to the machining program Error diagnostics for rapid troubleshooting of simple issues Statistics on machining parameters USB port Prepared for network connection Excellent accessibility to working units thanks to the large hood, ensuring protection and noise reduction Automatic positioning of units when changing panel thickness Panel feed via chain conveyor with rubber slip shoes Quality made in Italy Equipment details 10" touchscreen control panel Optimum machine management with the new 10" touchscreen control panel featuring Maestro Active Edge, visually representing all machine functions Pre-milling unit Two diamond-tipped cutters Glue station Glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during prolonged machine idle times Teflon-coated glue pot for easy glue changes Device for reusing unused glue Automatic application of edge banding from coils with cut-off knife for edges up to 3 mm Rotary table with Ø 730 mm Self-lubrication of the glue pot Quick-change kit for the glue pot Flush/radius milling unit With horizontal and vertical tracing rollers for optimal tool positioning Equipped with combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via 2 digital displays With chip extraction Surface scraper Absolute cleanliness for perfect finishing of the workpiece surface With rotating copying device Buffing unit Powered by two independently swiveling and height-adjustable motors For perfect cleaning and polishing of panel edges Profile scraper With digital position display Iedpfxsxxuvbo Ab Ioa For perfect finishing of plastic edges With device to retract the unit when it is not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed

Year of construction: 2025, condition: new, functionality: fully functional, IMPORTANT: delivery time (ex works) approx. 3 weeks Roller glue application units for edge banding machines require regular cleaning, service and maintenance. Wood chips, burned glue particles and other contaminants behind the glue roller won't allow an even and thin glue film on the roller. Hence there won't be an ideal glue application to the board. This is valid for EVA hot-melts and even more so for PUR glues. As long as the glue application unit is still inside the machine the limited accessibility will restrict maintenance success and also result in longer down time. If the application unit is removed the quick cooling-down will prevent thorough cleaning. Furthermore the lack of a proper fixing device and a drive motor for the glue roller are other disadvantages. Technical Data: - 2-temperature control (2 channels) with easy to read display - Heating target temperature and drive starting temperature can be set individually Iedpfxstmviio Ab Ija - Glue roller speed: 60 rpm - 2 straight wheels, 2 turnable wheels with brake - Main supply connection cable: 10 m - Power supply: 380(400) V, 50/60 Hz - Installed power: approx. 2 kW (max) - Dimensions  L x W x H:  60 x 50 x 100 cm - Weight: ca. 60 kg - Painting in light grey RAL 6035 u. traffic blue RAL 5017 Technical documentation with operating instructions, spare parts list and wiring diagram are included in the scope of supply.

Condition: ready for operation (used), Year of construction: 2021, Additional Equipment Mobile Console with integrated PC"eye-M": 21.5" LCD color display through a 16/9 sized touch screen / AAR Anti-Adhesive Device: Positioned before panel edge trimming unit / Spray-Mist Device: Positioned for edge finishing and glue cooling / Loader for Narrow Pieces: Device to facilitate manual square loading of narrow pieces This SCM STEFANI MD edgebander was manufactured in 2021. It features a versatile automatic edge banding capability for solid wood up to 15 mm, with an option for 22 mm. The machine includes an "SGP" glue pot for both EVA and PUR glues, ensuring a perfect joint line. The "Startouch" control system offers a 12” touch-screen display, customizable working programs, and graphic simulation of machining. Ideal for high productivity with speeds up to 25 m/min. Contact us for more information. Application Types Edge Banding Iodpfxexn Ux Ue Ab Ija

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 Iedsv Sv Enjpfx Ab Iea with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach