Used Edgebanding for sale (1,046)

Condition: excellent (used), Year of construction: 2011, Edge banding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Max. 15 mm possible with tool change on the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min Control unit PPC 221 – with 8.4" VGA color screen Motorized adjustment of the infeed fence, adjustable via control unit Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feed 1901 SYNCHRO Automatic feeding of roll and strip material Glue application system Glu Jet GJ301 automatic Automatic glue height adjustment (contact nozzle) Glu Jet hybrid technology – for processing EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Glue granulate container 5 kg for GJ301 PRESSURE UNIT – Pressure section 1914-1 MOT END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swivel function 0/10° for coils and strips MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) with 4 NC servo drives for flush, radius, and chamfer cuts CORNER ROUNDING UNIT Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm) Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors SCRAPING UNIT 1927 MOT5 Carbide reversible blades for scraping knives 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue to achieve a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 Hfjdexggmbjpfx Aabsn 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 730 h, Edge banding machine Hebrock AKV3005DK-F with pre-milling, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Touchscreen interface with PLC control for simple operation of the machine; up to 12 user programs can be saved. Edge thickness roll approx. 0.4 - 3mm Workpiece height approx. 8 - 53mm Feed rate approx. 10m/min Noise reduction hood Extendable workpiece support, special feature extendable up to 950mm Extraction connection 80 + 140mm Units: Quick-change glue pot with glue outlet; two glue pots included in delivery (one used for EVA glue, one for PU glue), the PU glue pot is practically as new, only purchased for a single job. Pressure beam manually adjustable with SIKO counter Infeed fence manually adjustable with SIKO counter Edge thickness manually adjustable with SIKO counter Pre-milling unit with Leitz Whispercut diamond cutters, still sharp Gluing station with automatic edge feeder for coil material up to 3mm Hedstpn Etjpfx Aabofn Pressure zone with 4 rollers Cross-cut saw Integrated collection container for edge trimmings Combination milling unit, R2 with pneumatic adjustment between thin and thick edge Corner rounder R2, pneumatically adjustable between thin and thick edge The profile milling unit can also be used for shelf program, that is, it only rounds the straight edge, not the corners Radius scraper blade R2, pneumatically retractable Glue joint scraper blade, pneumatically retractable Hood lock CE marking Operating manual A video of the machine in operation can be sent upon request. All reversible knives of the milling units and scraper blades have been renewed or rotated, saws sharpened. The machine is therefore ready for immediate use. Only the diamond pre-milling cutters (Whispercut) have not been replaced, but are still sharp. Paintwork touch-ups carried out. The Hebrock AKV series is the predecessor of the current K series. The machine has only about 730 operating hours (glue pot switched on), but the frequency converters were switched on for only about 455 operating hours. The machine is in very good condition, see original photos. Machine dimensions approx. 5000 x 1400 x 1550mm (LxWxH) Weight approx. 1550kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse; see "further offers from this provider."

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Hjdpsxllvfofx Aabofn Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with draining function optional), HF cross-cut saw unit, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence and integrated line control for non-contact operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer rolls, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free slots for finishing units. 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Jointing unit cutting depth: 0–2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: - Surcharge for radius scraping unit with air blast device + extraction - Surcharge for surface scraping unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with draining function - Surcharge for diamond tools height=65 mm for jointing unit - Riepe spray device (anti-adhesive) on jointing unit - Riepe spray device (cleaning spray before buffing unit) - Piping system with 90° bend + manual slide valve mounted on the machine, D=200 mm Availability: short notice Storage location: Hochheim

Condition: excellent (used), Year of construction: 2020, operating hours: 759 h, Edgebander Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edge thickness: max. 5 mm - Panel thickness: max. 50 mm - Coil material thickness: max. 3 mm Hfjdpfxswzycne Aabjn - Workpiece length: min. 150 mm; Workpiece width: min. 85 mm - Feed speed: max. 9 m/min - Glue system: Granulate, lower glue pot; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spray unit - With BIESSE jointing unit RT 01 - Preheating zone, end trimming unit: 1 motor, BIESSE end trimming unit IT 01 - Flush/radius/chamfer units: 1 BIESSE fine milling unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner rounding unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting package: flush/radius/chamfer units, profile scraper - Execution: left-handed machine - Machine length: 4,215 mm; Weight: 1,000 kg - Total operating hours: 759.48 h; Total processed length: 46,284 m MACHINE AVAILABLE APPROX. FROM WEEK 42/2025!!

Condition: used, BRANDT highflex 1440 edge bander well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers Hfodpfx Ajv H D S Seabjn finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English) Hfodpfxoxly I Ao Aaben

Condition: used, machine/vehicle number: 008040, Position 1: Panel Feeding and Loading HOMAG-PROFI KAR610/20/L/30/WZ Hfsdew Ida Aopfx Aabon Position 2: Single Edgebanders HOMAG-PROFI KAR610/20/L/30/WZ Position 3: Robot HOMAG-PROFI KAR610/20/L/30/WZ

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Hedpexlqntefx Aabefn Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Function tested Equipment and technical data: Glue pot with roller End trim shears Pressure zone End trimming saw Combination milling unit Surface scraper Chassis Edge material thickness: 0.5-3 mm Min. workpiece width: 90 mm Min. workpiece thickness: 10 mm Max. workpiece thickness: 45 mm Min. workpiece length: 50 mm Hfedpfexllvlox Aaben Edge material overhang top and bottom: 2.5 mm Edge material overhang front and rear: 10 mm Location: Hesse Availability: End of November/beginning of December 2025

Condition: ready for operation (used), Year of construction: 2020, This FELDER G480 edgebander was manufactured in 2020. It features a feed speed of 9 m/min, tool diameter of 80 mm, and can handle panel thicknesses from 8 to 45 mm. The machine includes a premilling unit with a speed of 12,000 rpm and power of 2 × 1.1 kW, ensuring precise edge preparation. Additional features include a guillotine, pressure rollers, scoring cutters, a flat scraper, and a polishing unit. Contact us for more information about this machine. Application Types Edge Banding Hfedpfxjxd H T Aj Aaben

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with edge sanding unit for processing edges made of wood, veneer, PVC, melamine, ABS – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchen and bathroom furniture, and various other products. Technical data: Min./max. panel height: 8–60 mm Panel height with rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness in roll: 0.4–3 mm Minimum panel width: 55 mm Hfodpfxjxnvr As Aabjn Feed speed: 11 m/min Pressure beam with motorized vertical adjustment Panel support arm Sound-insulated safety cabin Fluid inlets Configuration: Anti-adhesive application unit with two nozzles – two separate tanks for anti-adhesive fluid Pre-milling unit with two high-frequency motors – diamond tools H64 mm – diameter 100 mm, F 30, h 65 – copying kit included VC 560 gluing unit for applying edging to panels up to 60 mm – glue pot capacity: 1.5 kg – interchangeable glue pot End cutting unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, 115 mm diameter – face copiers Tilting trimming/bevelling unit for trimming excess edging top and bottom – 2 motors of 0.55 kW each – 12,000 rpm – tilt from 0° to 25° – 2-position pneumatic quick-change kit for processing thin or radius edges Corner rounding unit with two motors on precision guides – enables rounding and trimming of thin and thick edges – 2 motors of 0.55 kW each – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edging with rotating tracing guides, extraction hood, and trimming waste cassette Glue scraping unit – removes glue residue from the lower and upper panel surfaces Brushing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, This is a Hebrock 3006 DK-F machine that has operated a total of 68 km of edge banding. Most of the air supply hoses have been replaced. The machine comes with an additional set of pre-planing cutters, sharpened and ready for use. Model: AKV 3006 DK-F Machine No.: 1277 Voltage: 400 V Frequency: 50 Hz Current: 29.7 A Power: 12.3 kW Year of Manufacture: 2007 Manufacturer: Maschinenbau Hebrock GmbH, Bünde, Germany Description: The machine features: - Premilling unit - Edge trimming unit - Buffing unit - Corner rounding unit Hedpfx Aoxiv R Uoabjfn - Spraying unit for antistatic and coolant liquids - Glue application unit with quick-change glue pot - Control screen for easy parameter adjustment Condition: Excellent, fully operational and well-maintained.

Condition: excellent (used), Year of construction: 2015, Edge banding machine Hebrock F 4 with jointing, corner copying, and two scraper blades. Very well-maintained machine from a small workshop, in excellent condition. Color touch-screen interface with PLC control for easy machine operation, allowing storage of up to 10 user programs. Edge thickness for roll material approx. 0.4 – 2 mm Workpiece height approx. 10 – 40 mm Feed rate approx. 7 m/min Soundproof enclosure Extendable workpiece support Extraction connection: 1 x 140 mm Units/Features: - Manual pressure beam adjustment with SIKO counter - Manual infeed fence adjustment with SIKO counter - Manual edge thickness adjustment with SIKO counter - Jointing with diamond cutters, blades re-sharpened - Gluing section with automatic edge feed for roll material up to 2 mm - Glue pot with quick-change system for rapid color changes - Pressure zone with 3 rollers - End trimming saw - Combination milling unit, R2 with pneumatic adjustment between thin and thick edge - Radius scraper R2, pneumatically retractable - Corner rounding unit R2, pneumatically settable between thin and thick edge The contour milling unit can also be used for shelf processing, i.e., only the straight edge is rounded, not the corners - Glue joint scraper, pneumatically retractable Other features: - Hood locking - CE marking - Operating manual A video of the machine in operation can be provided upon request. All indexable inserts of the milling units and scrapers have been replaced or rotated; saws have been sharpened. The machine is therefore immediately ready for use. The diamond jointing cutters have also been sharpened. Paintwork touch-ups have been carried out. The machine has approx. 335 operating hours and has only processed approx. 20,700 linear meters of edging material. The machine is in very good condition; see original photos. Machine dimensions: approx. 4050 x 1100 x 1400 mm (LxWxH) Weight: approx. 800 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See “more offers from this provider.” Hodpfx Aaew Sn I Esbjfn

Condition: used, Year of construction: 2001, total length: 5,650 mm, total height: 1,750 mm, total width: 1,100 mm, Price: On request - Year: 2001 - Documentation available: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport packages [pcs.]: 1 Hodpjxlqpdefx Aabofn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical data: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads - Edge feeding with single infeed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301, automatic glue height adjustment (sensing nozzle) - Pressing unit 1912-3 pneumatic - Pneumatic trimming unit 1918 (60 mm) - Extraction hoods for trimming unit - Multifunction milling unit FR 201 - Corner copying unit 1832 for up to 3 mm edge thickness - Scraper unit 1929 - Chip collection box - Flat scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4-6 mm Feed rate: 10 m / min Overall length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Location: Hesse Availability: approx. December 2025 Hjdpfx Ajxllvrjabefn

Condition: ready for operation (used), Year of construction: 2013, Tools Max tool length 5760 mm Additional Equipment Joining Unit: 2 x 2.2 kW 200 Hz Gluing Unit: A12 Snipping Unit: Chamfer/Straight 2 x 0.35 kW Pneumatic Adjustment for Bevel/Straight Cross-Cuts Pneumatic 2-Point Adjustment for Cross-Cuts Pre-Milling Unit: 2 x 0.55 kW O degrees Pneumatic 2-Point Adjustment Hodpfjxfw A Rex Aabsfn Multifunctional Shaping Unit: 2 x O, 4 kW Profile Scraper with Quick-Change Heads Pneumatic Adjustment Scraper Blade This BRANDT KDF 650 Highflex 1650 edgebander was manufactured in 2013. Ideal for precise edgebanding applications, it ensures reliable performance for woodworking professionals. Consider the opportunity to buy this BRANDT KDF 650 Highflex 1650 edgebander. Contact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Hsdpfxsuvdzuj Aabsfn

Condition: used, functionality: fully functional, Edgebanding unit End trimming unit Trimming unit 2nd trimming unit Hfjdpfxoxfuh Dj Aaben Sanding unit

Condition: used, Year of construction: 2010, Edge thickness 0.4 - 10.0 mm; cross-cut saw unit; radius scraper unit; flush and radius milling unit; joint milling unit; polishing unit; corner rounding unit; spraying of release agent; spraying of cleaning agent; interchangeable glue pot; cross-cut saw unit e-motion; combination milling unit e-motion. Storage location: customer Hfedpoxguvqsfx Aabon

Condition: used, total length: 4,350 mm, total height: 1,600 mm, total width: 900 mm, Weight: 1.850 kg - Documentation available: No - Transport dimensions: 4350mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 1850kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hodpfjxlnfpsx Aabefn Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, Used machine Machine completely overhauled and serviced Features and technical specifications: Infinitely variable feed speed 10-18 m/min Edge Control 19 control unit with 18.5" touchscreen color display Jointing milling unit Edge feeding unit Glue application station with cartridge and sensing nozzle, including automatic glue height adjustment Pressure unit End trimming unit Hfsdpfx Aajwka N Tsben Multifunctional milling unit Copy milling unit Radius scraper unit Flat scraper Buffing unit Workpiece thickness 6 - 60 mm Edge thickness 0.4 - 8 mm Minimum workpiece width 60 mm Shortest workpiece length 180 mm Weight approx. 2200 kg Location: Flörsheim Availability: short-term

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements depth 7300 mm Additional Equipment Glue pot granules including 2 glue pots for PUR Jointing unit Spraying device Crosscut saw unit Flush, radius, and chamfer capability Corner copying Scrapers Hodpfxexfct Io Aabsfn Buffing unit This OTT Twister edgebander was manufactured in 2009. It features a panel thickness capacity up to 60 mm and a feed rate of 20 m/min. Equipped with multiple units including jointing, crosscut saw, and corner copying, it also offers flush, radius, and chamfer capabilities. Ideal for efficient edge banding operations. Contact us for more information about this machine. Application Types Edge Banding

Condition: used, machine/vehicle number: 007234, Max. panel width: 900 mm Max. panel length: 1200 mm Length of conveyor: 8000 mm Panel return for edgebander: Left Hfedpfx Aaewlpnnebon

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Machine number: 133 Hedpfx Aewka Iieabefn Machine has been completely overhauled New Glue Jet 301 gluing system (top section, 1 mm) All units inspected All cutters re-sharpened All knives replaced - Electrical system for stepless feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 jointing cutters for trimming panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit 1801 / 1802 - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit 1801 / 1802 - Edge feed 1901 fully automatic - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate supply hopper - Pressure unit 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profiling unit 1833 MOT4 - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2 - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Working dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness for roll material: up to 3 mm Feed Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology Glue system for granulate Hodoxizulspfx Aabjfn Glue pot located above the feed Interchangeable pot HOMAG QA 65 N Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and end trimming with two motors Station for flush, radius, and bevel processing Corner rounding unit with two motors Scraper blades: profile and flat scraper Buffing unit Additional equipment and operator features Integrated spraying device Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operator interface Right-hand machine version CE-compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: approx. December 2025 Location: North Rhine-Westphalia (NRW)