Used Eisen Und Hammerwerk Gmbh for sale (71,973)

Condition: good (used), Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm Redpfsb Ix Niox Aazjn -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg

Condition: good (used), Year of construction: 1970, Transformer, transformer, converter, three-phase autotransformer, isolating transformer, 3-phase transformer -PCB containing insulating liquid exchanged in 1998 Rodpfxeb Iqgne Aazjn -Input: 6000V -Output: 400V -Power: 200kVA -Type: LT -(for technical data see photos) -Dimensions: approx. 1300/800/H1600 mm -Weight: about 1000 kg

Condition: good (used), Frame press, gluing press -operated: hydraulically Redpsb A H Dhsfx Aazsn -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Rjdeirmulspfx Aazjn

Condition: repair required (used), Year of construction: 2011, operating hours: 104 h, functionality: limited functionality, machine/vehicle number: KN 10 39 17, type of cooling: water, rotational speed (max.): 1,500 rpm, tank capacity: 700 l, nominal power: 128 kW (174.03 HP), nominal power (apparent): 130 kVA, fuel type: diesel, output voltage: 400 V, output current: 188 A, output frequency: 50 Hz, motor manufacturer: Deutz, For sale is an AVS Aggregatebau GmbH diesel generator with the following key specifications: Manufacturer: AVS Aggregatebau GmbH Type: DW 130 De 15 M 12 Unit No.: KN 10 39 17 Year of construction: 2011 Technical Data – Complete Generator: Power output: 130 kVA Voltage: 400V 50 Hz Speed: 1500 rpm Fuel tank: 700 L capacity Consumption: Up to 209 g/kWh, depending on load Operating hours: 104.8 h Detailed Components: Diesel engine Deutz BF6M 1013 E Engine No.: 11021228 Power output: 128 kW Speed: 1500 rpm Water-cooled Generator Mecc alte ECP 34-1L/4 Generator No.: 0001444400 Power output: 130 kVA Cos-Phi: 0.8 Voltage: 400 V Current: 188 A Frequency: 50 Hz The generator set has the following maintenance backlog: - Replace V-belt - Replace battery Rodpfovtpv Nox Aazon - Change coolant If dismantling and pickup are carried out by the buyer, the selling price is €18,500. If dismantling is performed by Blue Energy Group AG, additional fees will apply. The components included in the purchase price can be identified in the images.

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Model 1: SCARD 100 Model 2: SCARD 70 Rodpevkdkiefx Aazjn Year of manufacture: 2005 Power: 3.1 kW

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: F20iMW1 Faserlaser, workpiece weight (max.): 50 kg, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, overall weight: 250 kg, warranty duration: 6 months, height adjustment type: electric, scan area width: 175 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,064 nm, Equipment: cabin, Used fiber laser system for professional engraving, marking, and labeling of metals and plastics. Industrial quality, laser class 1, CE-compliant, Made in Germany. Technical Data - Laser source: IPG Ytterbium fiber laser (MOPA) - Power: 20 W - Wavelength: 1064 nm - Pulse frequency: 20–200 kHz - Beam quality: M² < 1.6 - Power supply: 230 V / 50 Hz Scanner & Optics - X-Y galvo scanner for 1064 nm - F-Theta lens f = 254 mm - Marking field: approx. 175 × 175 mm - Pilot laser (red) + 2 focus distance lasers for focus setting Machine & Work Area - Enclosed laser class 1 workstation - Combined sit/stand workstation - Motorized Z-axis (400 mm total travel) - Stainless steel worktable with 25-mm perforated grid - Extraction port DN50 (extraction unit not included) Control & Software - Industrial PC - SK CONTROL marking software (texts, logos, QR codes, variable data) - Ethernet, USB, RS232, Start/Stop for extraction - 23" monitor, keyboard & mouse Scope of Delivery & Safety - Complete machine with aluminum housing - Emergency stop, main switch, status indicators - Circuit diagrams & operating manual Redpsyctfdsfx Aazjn - CE, TÜV-tested - Laser class 1

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 99-908.06, feed rate X-axis: 199 m/min, working height: 100 mm, Crosscutting System PAUL Model 14 Year of manufacture: 1997 Saw motor: 7.5 kW Feed motor: 4 kW Driven lower rollers: 6 pcs Non-driven upper rollers: 6 pcs Minimum cutting time: 0.2 sec Max. feed speed: 3.33 m/sec Cuts per minute: 120 Rsdpfjybbnqsx Aazjn Min. infeed length: 300 mm Max. infeed length: 7000 mm Max. timber thickness: 100 mm Timber width: 380 mm Min. timber cross-section: 12 x 40 mm Max. timber cross-section: 45 x 380 / 100 x 200 mm Max. timber weight: approx. 70 kg Min. fixed length: 140/30 mm Infeed conveyor: 5200 mm Outfeed conveyor: 6100 mm with 4 ejectors (1000 mm, 500 mm ...) Max. stock length: 5000 mm Video of the running machine available upon request.

Condition: excellent (used), Stone cutting saw with diamond blade Rjdpsw Evznofx Aazsn

Year of construction: 2016, condition: used, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Rjdpfx Aaoya H Uyozjn

Condition: used, functionality: fully functional, GIGAbend RAS 76.30 - Rodpfx Aaex Hf E Eszjn New images available: Listing images 1 to 3 are current pictures Listing images 4 to 5 are reference images of the machine’s configuration regarding table type - General technical data in mm: Bending length: 3200 mm Max. sheet thickness (400 N/mm²): 6.0 mm Max. upper beam stroke: 500 mm Upper beam clamping force: 120 tons Backgauge system (U-gauge): 10–4050 mm Machine dimensions (U-backgauge): 4620 x 5480 mm Base machine weight: 11 tons Backgauge + U-shape weight: approx. 1205 kg - Machine-related data: Motor operation: 400V, 50/60 Hz, 3-phase Year of manufacture: 2007 Condition: Refurbished – very good used condition Complete tool set 2-person operation from the front Second footswitch for operation from the rear (including light barrier for rear operation) 15" CNC color graphic touchscreen controller (Touch&More) CNC backgauge and hold-up system (10–1550) Backgauge system (U-gauge): 10–4050 mm

Condition: used, Used Moeschle approximately 4,900 litre total capacity 304 stainless steel vertical storage vessel. Unit measures approximately 1,000mm straight side x 2,200mm diameter. Unit has welded dished top and bottom heads. Unit mounted on (3) legs. Specifications: Capacity: 1,295 gal Diameter: 7.22' Rodpfx Aox Tibqoazsn Height: 3.28' Type Of Heads: welded dished top and bottom Vertical/Horizontal: vertical Type of stainless: 304 Legs/Lugs: 3

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 360034, Fine grinding machine for various workpieces made of different materials with opposing flat surfaces that need to be ground on one or both sides, e.g., wafers, valve covers Rsdsir Ul Sepfx Aazen For flat honing of workpieces with special height, parallelism, and flatness requirements. Technical data Workpiece diameter: 5–220 mm Workpiece thickness: 0.6–80 mm Warranty 6 months legal warranty

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 381019, Machine type Planet V7 Machine no. 381019 Technical data Double Disk Grinding Workpiece diameter: max. 180mm Rodpei Hp U Esfx Aazon Workpiece thickness: max. 100mm Condition Technical quality – very good Optical quality – like new Location Germany Warranty 6-month legal warranty

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact, high-performance 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust build and advanced load-sensing hydraulics ensure efficient and precise operation even under demanding conditions. Thanks to the boom swing function, this machine is ideal for confined worksites and standard earthmoving or foundation tasks. Key Technical Features: - Boom swing for precise operation in tight spaces - Stable undercarriage (1,300 / 1,500 mm) providing excellent stability - Powerful Yanmar diesel engine Rodpfx Aox Hg Etsazen - Load-sensing hydraulic valves for sensitive control - High-capacity axial piston pump - Hydraulic piston drive and swing motors - High digging and breakout forces - Durable rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Ground clearance upper carriage: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Drive & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dumping height: 4,190 mm - Max. dumping height: 2,880 mm - Min. turning radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. lowering depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Working pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cab with heating - Dozer blade - Joystick control - LED work lighting - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel frame Accessories & Attachments – SET includes: - 25 cm trench bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts available ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Excavators available immediately - Europe-wide delivery can be arranged on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €22,000 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator designed for continuous professional use in construction, civil engineering, and landscaping. Thanks to its robust steel construction, state-of-the-art load-sensing hydraulics, and compact dimensions, this machine is ideally suited for work in confined job sites as well as demanding earthmoving and foundation operations. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, offering excellent operator comfort, safety, and productivity, even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise operation in tight spaces - Telescoping undercarriage 990–1,300 mm for maximum stability - Integrated travel motors with high/low speed - Load-sensing hydraulic valves – energy efficient & highly responsive - Axial piston pump with variable displacement - Slew drive with plunger-type rotation motor - Dual cast counterweights for superior stability - Wear-resistant rubber tracks 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (superstructure): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (telescopic) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 Redpfx Aaox Hg D Aszjn - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 hp) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Maximum gradeability: 30° - Maximum drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. digging height: 3,570 mm - Max. dumping height: 2,480 mm Dozer Blade: - Max. lift height: 280 mm - Max. lower depth: 190 mm Hydraulic System: - Pump type: Axial piston pump - Flow rate: 64 l/min - Operating pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Equipment: - Fully enclosed cabin incl. heating - Joystick control - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel construction - Dual cast counterweights Standard Attachments & Accessories – SET includes: - 25 cm trenching bucket - 50 cm trenching bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex-stock Rheda-Wiedenbrück (DE) Delivery & Availability: The excavators are available immediately. Europe-wide delivery can be arranged on request. This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück

Condition: refurbished (used), Year of construction: 2010, HOLTEC round timber infeed LINCK infeed conveyor EV40 Redpjyat R Uofx Aazen LINCK V40 LINCK turning device DV55 LINCK infeed conveyor EV40 LINCK V40 LINCK double profiling unit VPP34 LINCK circular saw VS66 LINCK board separator SEA LINCK turning device DV35 LINCK centering unit ZZP LINCK double profiling unit VP34 LINCK circular saw MKV LINCK splitter wedge SEK

Condition: used, Year of construction: 2009, We are offering this used ECS Eich Maschinenbau GmbH VS20/S4C sludge dewatering system, year of manufacture 2009 (modified). Not as erroneously listed (1990)! Manufacturer: ECS Eich Maschinenbau GmbH Model: VS20/S4C Redpfsyaccasx Aazen Year of manufacture: 2009 Design: Compact construction Length: 3800 mm Width: 1200 mm Height: 2800 mm Clarification capacity: 180 l/min If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2001, For the commission-driven drilling and pressing of hinges as well as drilling Of handle and lock holes and indentations for special fittings and additional bores Up and down at doors. Rodpfxoc Tu Rvo Aazon Workpiece dimensions: • Length: 300 mm 2500 mm • Width: 200 mm 800 mm • Thickness: 16 mm 30 mm • The workpiece width must not be greater than the workpiece length! Working height: 970 mm

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Rjdpfx Ajyabxysazjn Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Condition: used, Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified. Redpfeif Ek Rjx Aazon

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified. Rodpefnlkwsfx Aazjn

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Rodpsfhgvwsfx Aazen Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm Rjdswgc I Repfx Aazon • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2016, operating hours: 12,229 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain iTNC530i with integrated pallet changer, 36 pallet positions Travel range X/Y/Z: 730 x 250 x 400 mm B-axis travel range: +/- 105 degrees C-axis travel range: infinite Work area X/Y/Z: 585 x 250 x 400 mm Max. workpiece weight: 60 kg Distance: machine table to spindle nose: 450 mm Machine dimensions (W x D x H): 2845 x 2370 x 3000 mm Machine weight: 8000 kg Equipment/Features: Cooling unit Rotary tilt table 160 (B/C-axis) Workpiece measurement: Renishaw OMP400 Tool measurement: BLUM Dynaschine collision controller (DCM) Table chuck: EROWA PowerChuck P 150 Pallet changer 36-fold EROWA ITS50...148 Tool changer: 90 positions for HSK40 MHT media distributor with 3 dosing settings Control system: Heidenhain iTNC530 HSCI FS Milling spindle: Steptec HVC140 Spindle power S2/S6 40%: 10 kW / 13 kW Spindle speed: 42,000 rpm HSK40 Z-axis compensation Exo-call fault indicator Rodow U D Igopfx Aazen Exo-net remote diagnostics Network connection Portable control panel HSCI FS Pressure amplifier for chuck Transport, training, and commissioning on request