Used Engine Test Bench for sale (28,258)

Condition: excellent (used), Here we offer you a climate chamber. Water-cooled Test chamber volume: 350 liters Internal chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature working range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate working range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Type: CS-70/350 For your safety as a buyer, please note the following information: The following steps are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components Bedpjygumkofx Afhecu 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run which is monitored with calibrated equipment. Condition: used Scope of delivery: (see photo) (Specifications, technical data and details may be subject to change. Errors excepted.) For any further questions, we are happy to assist you by phone.

Condition: excellent (used), Feutron Temperature Test Chamber We are offering a temperature test chamber here. Feutron Temperature Test Chamber, Air-Cooled Nominal test chamber volume: 280 liters Dimensions External dimensions: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test chamber interior: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Heated viewing window: 500 x 600 mm Temperature range -70°C to +180°C Heating rate: 4.0 K /min Cooling rate: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Bcedpfoygulysx Afhsu Maximum power consumption: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerants: R507 / R23 For your safety as a buyer, please note the following information! The following steps are carried out on all chambers we offer in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications subject to change and errors excepted!) If you have any further questions, we are happy to answer them by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C Bcjdpfoygultex Afheu - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Bcedpsygulmjfx Afheu Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: C-40/350 Ex/l Climate Test Chamber, Water-Cooled ATEX Zone 1 The Ex/l designation indicates that this climate test chamber is suitable for use in hazardous areas classified as Zone 1. This means it is designed for environments where explosive atmospheres may occur. Such equipment is specially constructed and tested to ensure safety in these conditions. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: approx. 3500 W at +20°C approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage of 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Design: Cooling unit: water-cooled, low-noise, fully hermetic, infinitely variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Rack: Stainless steel, support surface 620 x 600 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg Control system: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numeric input of setpoints Plain text fault messages RS 232 interface Ethernet interface Free switching channels for user-side test item control Dimensions: Test volume: 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Bsdpsygui Sofx Afhscu Operating Data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 7.15 kW Nominal current: 14.3 A Protection class: IP 54 Sound pressure level

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) Bcodpfx Afeyguh Ijhju - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: new, Year of construction: 2026, Standard equipment: - Robust, high-quality, inclined rotation hood for easy reading of the speed - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Infinitely variable speed control - Connection cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical interlock - Thermal overload protection Bcsdpfx Afsihipzoheu - Emergency stop push button Weight in kg: 44 Motor power kW: 0.45 Single-phase 230 V Speed rpm: 250–3000 Drilling capacity mm: - Steel Ø 12 mm - Aluminium Ø 20 mm - Softwood Ø 40 mm - Drilling depth 60 mm - Throat 220 mm - Column diameter 70 mm - Usable table surface (W x D) 300 x 250 mm - T-slot size: 2 slots, distance 100 mm, slot dimensions width 14/26 mm - Spindle taper B16 - Speed display: Digital - Drilling depth display: Scale - Drilling depth stop: Quick-adjust stop ring - Feed: Manual Option DRILLING PACKAGE 1 – Price: €272 – Vice [felix] 2.0 80 – Quick-release drill chuck B16 1–13 mm (accuracy 0.17 mm) - FACTORY WARRANTY: 3 years - Free delivery including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! CALL AND REQUEST A QUOTE!

Year of construction: 2021, condition: used, machine/vehicle number: 2150801, max. clamping length: approx. 60 cm, with darkening cabin Bjdpfx Aox Akkcjfhecu

Condition: used, bore capacity in steel (diameter) 23 mm throat 220 mm bore stroke 120 mm Number of revolutions 25 - 3.200 U/min distance Spindlenose and center of table 275 mm Bcsdpfx Asyfwunofhou table surface area 300 x 355 mm T-slots 3x T - slots distance 120 mm column diameter 110 mm weight of the machine ca. ca. 120 kg dimensions of the machine ca. 0,8 x 1,0 x 1,9 m Table Drilling Machine IXION - BT 23 ST - incl. base cabinet

Condition: excellent (used), CTS Type: T-40/600 Water-cooled temperature test chamber Control system: - 32-bit controller - LCD operator panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free relay channels for user-side test item control Technical specifications Temperature tests: Temperature range: -40 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K (over time) Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Bsdpfxox E Tq Tj Afhecu Cooling: 2.5 K/min Thermal radiation: approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without test specimen, no heat input, and without additional equipment. Dimensions: Test chamber volume: 600 liters Test chamber interior dimensions (HxWxD): approx. 850 mm x 850 mm x 830 mm External dimensions (HxWxD): approx. 1900 mm x 1120 mm x 1875 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 7.1 kW Rated current: 12.3 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R-452A Weight: 700 kg Important safety information for buyers: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and errors reserved!) We are happy to answer further questions by phone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg. Bodpfxexw N Uvo Afhocu

Condition: ready for operation (used), Year of construction: 1970, Double sanding bench with tilting device Bsdetwnxuopfx Afhjcu Type:R20 1 H Grinding wheel diameter 200 mm.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Bodpfx Aeydi A Isfhocu -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: excellent (used), Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the materials testing software testXpert II, version 3.61. The system is suitable for standardized and customer-specific materials testing in quality assurance, research, development, and production. Its modular design allows the use of different testing methods and fixtures. Software – Zwick/Roell testXpert II V3.61 Bcedoyc R R Djpfx Afhju The machine is controlled via the professional testXpert II V3.61 testing software. This software is an industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Real-time measurement of force, displacement, and time - Automatic test sequence control - Graphical display of measurement curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g., PDF, CSV – depending on configuration) Several test routines (e.g., tensile, compression, and calibration procedures) are provided on the system (see software screenshots). Possible test methods: With the available equipment, the following tests can be performed, among others: - Tensile tests (e.g., plastics, metals, composites) - Compression tests - Bending tests - Determination of Fmax / breaking force - Force and displacement monitoring - Calibration and adjustment procedures for load cells (The available test methods depend on clamping jaws and fixtures used.) Technical data: Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.): Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures/tools as shown in the pictures (Subject to changes and errors in technical specifications! All details provided as is.) For further questions, we would be happy to assist you by phone.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 950 mm, table load: 3,000 kg, spindle diameter: 100 mm, spindle speed (max.): 2,500 rpm, total width: 1,000 mm, table length: 1,120 mm, travel distance W-axis: 710 mm, quill diameter: 100 mm, year of last overhaul: 2025, The machine is in very good technical condition after modernization in 2025, connected and available for testing. Heidenhain iTNC 530 control system. Accessories: tools, clamping angles, workpiece probe. Bedpfxoxz E N Ds Afhecu

Condition: like new (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,250 mm, table load: 5,000 kg, spindle diameter: 105 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 1,400 mm, table width: 1,400 mm, feed length W-axis: 630 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill diameter: 105 mm, year of last overhaul: 2025, The machine is in excellent technical condition after a complete mechanical overhaul. Equipped with a Heidenhain iTNC 530 control system. Bcodpfx Afsx E Uhaehju

Condition: used, Year of construction: 2017, 2017 | MAN TGS 33.500 (NEW ENGINE) | Used Tipper Truck | 459568 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Bjdsyb Ukfopfx Afhecu 💰 Buy Now for EUR 34900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 36 inspection points 29 approved ✅ 1 imperfect ℹ️ 6 issues ⚠️ 📌 Inspector's Comment: Nice truck with good performance. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39689 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, max. wheel diameter 0 mm gear width 0 mm max. module 40 Bodpfxsvn Unyo Afhocu min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines.

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer Bsdpfx Aeb A Ivzofhjcu -Number: 7 available -Price: per piece

Condition: excellent (used), Year of construction: 2003, max. wheel diameter 600 mm gear width 700 mm max. module 20 min. module 0,5 table diameter 300 mm x-travel 300 mm y-travel 600 mm z-travel 700 mm workpiece weight 300 kg Control Zeiss max. workpiece diameter 600 mm clamping length 20 - 1000 mm ical angle 90 ° Bcedpfxewyxycs Afhju total power requirement 2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3,0 x 2,0 x 2,4 m Form measuring machine,gear measuring machine,coordinate measuring machine --> Primar MX 4 WL Suitable for transmission shafts, pinion shafts, gears, pistons, gearboxes, connecting rods, camshafts and crankshafts, crankcases, cylinder heads,... Air-suspended, centering and tilting table, support bearings, high-precision design! Software: Gear, hob, piston, bevel gear, crankshaft, tapered mandrel, drive bevel gear, connecting rod,... New software update 2014!

Condition: good (used), For sale: professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern eyepiece-free microscope, providing a spatial 3D image without the need to place eyes against eyepieces – offering exceptional comfort for quality control and precision assembly tasks. Technical specifications: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: stereo, eyepiece-free • Illumination: integrated LED in the base • Power supply: 230 V • Head with focus and height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety test certification Condition: • Used item, optics are clean, mechanics fully operational. • Damaged upper cover of the plastic element (visible in photos) – does not affect operation or image quality. • Illumination is fully functional. • Device tested and ready for use. Bcsdpsxtfqxefx Afhou Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Condition: used, Year of construction: 2000, Horizontal Boring Mill Manufacturer: TOS Model: VARNSDORF WHQ 13.8 CNC Year of manufacture: 2000 CNC control: Heidenhain 426 Completely overhauled in 2022 Report available Travel (X/Y/Z): 3,500 x 2,500 x 1,250 x B800 mm Number of axes: 5 Table length: 2,200 mm Table width: 1,800 mm Clamping area: 1,800 x 1,600 mm Table load: 12 t Number of tool stations: 60 Spindle taper: SK 50 Bcjdpex A Ayijfx Afhju Spindle diameter: 130 mm Spindle speed: 2,500 rpm Power: 90 kW Heidenhain handwheel Telescopic guard fully refurbished with new wipers. Dimensions (LxWxH) approx.: 7,500 x 6,950 x 4,000 mm Weight: 40 t 21126ä

Condition: excellent (used), Year of construction: 2016, power: 566 kW (769.54 HP), SCANIA diesel engine DC16 085A for LINDNER URRACO 95DK Bjdpfx Asx Uqnuefhscu

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm max. module --- min. module --- Control --- total power requirement --- kW weight of the machine ca. --- t Bcjdpfx Afjya Eqashju dimensions of the machine ca. --- m

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Bcedpfx Aoya Iaqjfhju Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition