Used Engine Test Bench for sale (28,378)

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 Rjdpfxsvt U Tms Aazon - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Condition: new, Universally applicable double grinding machine for professional users. The induction motor runs quietly and maintenance-free thanks to the quality ball bearings. The quality grinding wheels ensure optimal work results when sharpening and deburring tools. Technical data: Grinding wheel bore: 32 mm Rodpfx Aovnrm Heazsn Grinding wheel grain: K 36 / K 80 Speed: 2850 rpm Motor output power S1 100%: 0.90 kW Motor input power S6 40%: 1.25 kW Voltage: 400 V Width: 510 mm Depth: 270 mm Height: 310 mm Weight approx.: 25 kg Features: - ON-OFF switch in accordance with IP54 with undervoltage release - Extended application area thanks to optionally available grinding attachment - Universally applicable for a wide range of materials (metal, plastic, wood, ...) - Very smooth running thanks to balanced rotor with quality ball bearings - Large protective glasses provide optimal protection against flying sparks - Stable and adjustable workpiece support made of cast iron - Powerful pulling power thanks to powerful Drive motor Scope of delivery: - Roughing disc K 36 - Finishing disc K 80 - Spark guard on both sides - Workpiece support Note: Illustrations may show special equipment and application examples. These are not included in the scope of delivery. (Belt grinding attachment and base frames available for an additional charge)

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Rodpfxjyfmm Tj Aazen Storage location: Shelf 1

Condition: defective spare-parts repository (used), functionality: not functional, fuel type: diesel, number of cylinders: 1, Used Hatz E 75 diesel engine, defective! Engine turns over but has no compression. Starting crank is included. Shipping is not possible. Please do not send email inquiries! If you have questions, we are happy to assist you by phone. Inspection and pickup are only possible by prior telephone arrangement. Subject to change, prior sale, and errors. Rodsydvnwjpfx Aazon

Condition: good (used), Vise, bench vise, locksmith's vise, clamping vise, workbench vise, clamping vise, table vise -Manufacturer: Bernstein, Spannfix ball joint vise, rotatable 360°, tiltable 45° -Clamping jaws: 45 x 25 mm -Wingspan: 90 mm -Table clamp: up to 82 mm -Transport dimensions: 310/10/110 mm -Weight: 1.4 kg Rjdpfx Aaox S Rq Rjzsn

Condition: new, Year of construction: 2026, Dauer-/Normalbohrleistung 18/20 mm Gewindeschneidleistung M12(steigungsabhängig) Spinde MK II Bohrtiefe 100 mm Ausladung 240 mm Säulendurchmesser 82 mm Nutzbare Arbeitsfläche B x L 340 x 280 mm T-Nutengröße (Arm), Abstand (mm), Abmessung Breite (mm) Anzahl 2, 125, 13/26 Drehzahlanzeige: Digital Bohrtiefenanzeige: Digital Bohrtiefenanschlag: schnell verstellbarer Anschlagring Bohrvorschub von Hand Tischhöhenverstellung mit Zahnstange Motor Drehstrom – frequenzgeregelt, 230 V, 0,75 kW Spindeldrehzahlen stufenlos 30 – 3000 1/min Tischarbeitsfläche: 155 - 415 mm Fußarbeitsfläche: 155 – 550 mm Maschinen-Abmessung: 355 x 705 x 1065 mm Gewicht: 170 kg Rjdpjulvd Hofx Aazsn Zubehör Optional: Bohrpaket 3: mit [felix] 2.0 100 Maschinenschraubstock Flott [felix] 100, Schnellspannbohrfutter 3-16 mm (Genauigkeit 0,17 mm), Kegeldorn MK 2 B18 und Reduzierhülse MK 2 auf Mk 1 491,00 € Werksgarantie: 3 Jahre Frei Haus einschliesslich Verpackung (nur Deutschland ) Lieferzeit: sofort ab Lager

Condition: new, Year of construction: 2026, functionality: fully functional, The POWER Test indicator is designed to check the clamping force of tools in the spindle of machine tools. Insufficient clamping force of the tool within the spindle can lead to poor machining quality and potential spindle damage. In clamping systems utilising disc springs, any spring failure results in a significant reduction of the clamping force. The POWER Test indicator provides a straightforward method to verify whether the clamping force has decreased to a critical level. Technical Specification Type: MUS02 Rjdeyak I Djpfx Aazsn Measurement Range: 10 – 30 kN Measurement Method: Incremental Accuracy: ±3% Repeatability: 0.3% Display: Digital, resolution 0.1 kN Units: kN Maximum Permissible Load: 75 kN Ambient Temperature: 10 °C – 30 °C Power Supply: 9 V battery Standard Adapters: SK40 and SK50

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm Rodpfx Aaeu Id Dzszsn distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Rjdpfx Aju Id D Ujazen Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Technical details: Rodpfju N E Evjx Aazen material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. Rodpfxevc Ayte Aazjn i.D. *

Condition: new, Year of construction: 2026, Spindle speed electronically variable, 40-4000 rpm Spindle: MT2 Table height adjustment via rack and pinion Maximum tapping capacity: M12 Setting of tapping depth via digital depth indicator digital speed display digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 15 mm / 18 mm Drilling depth: 70 mm Throat (distance from spindle to column): 220 mm Column diameter: 70 mm Usable table area (W x L): 300 x 250 mm Machine dimensions (W x D x H): 420 x 520 x 850 mm Weight: 65 kg Max. distance spindle/table/base: 300 / 370 / 420 mm Motor: single-phase AC, controlled by frequency inverter, 230 V, 0.54 kW OPTIONAL Drill Package 2 (No. 296591) - Felix 80 vice - Quick-action drill chuck B16 1-13 mm - Morse taper arbor B16 / MT2 - Reducing sleeve MT2 / MT1 Price: €315 Redpfx Aeig H Rdoazen Factory warranty: 3 years Delivery free of charge including packaging (within Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Condition: new, Year of construction: 2026, Description Double-sided grinding machine TS 200 SD P with extraction system, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Redpfxer Eqzfj Aazsn Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation - Extraction nozzle Ø (mm): 42 - Grinding wheel (mm): 200 x 32 x 32 - Machine dimensions without packaging (mm): 250 x 470 - Speed (rpm): 2550 - Three-phase motor 400 V (kW)1: Operating mode S2-30 min (short-term operation) - Weight (kg): 60 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2026, TS 300 SD P Bench Grinder with dust extraction, machine stand, emergency stop button, and brake Smooth-running, maintenance-free motor Side-enclosed protective covers Sturdy, adjustable workpiece supports High level of safety thanks to adjustable spark deflectors Suitable for grinding, deburring, and sharpening all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Connection cable with 16 A CEE plug One each of coarse and fine grinding wheels 12-month warranty for single-shift operation Rodpfx Ajr Ez Uweazjn - Grinding wheel (mm): 300 x 40 x 51 - Machine dimensions without packaging (mm): 540 x 530 x 1,180 mm - Speed (rpm): 1,250 - Three-phase motor 400 V / 2.2 kW: Operating mode S2-30 min (Short-term operation) - Extractor motor 0.55 kW, suction capacity 350 m³/h - Weight (kg): 90 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Year of construction: 1981, Manufacturer: ZWICK ROELL, Model: 1484, Year of manufacture: 1981, Tensile force: 250 kN, Travel distance: 1,400 mm, Optical system for deformation recording (from 2007), Evaluation unit, Sample punch ZWICK RZ 65, Sample grinding machine 7120 (in storage) +++ Attention: Machine is part of an online auction! +++ Redox R Ec Sspfx Aazon

Condition: used, functionality: fully functional, machine/vehicle number: WDB61526615351180, mileage: 29,700 km, power: 246 kW (334.47 HP), first registration: 11/1988, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, Year of construction: 1988, water tank capacity: 2,500 l, Equipment: all wheel drive, differential lock, Mercedes-Benz 1428 AF (334 hp) All-wheel drive with firefighting tank body 29,670 km TLF (decommissioned 04/24) with Ziegler Type 3 body 6 seats 2,500L water 300L foam Pump with only 367 h Last Vogt inspection at 357 h Regularly maintained Largely de-equipped HD/ND rapid intervention system present Suction hoses included Ready for immediate use CEJN charging system (air/electric) with automatic ejection (socket only) Pneumatic ladder system Tires as new Last roadworthiness inspection (MFK) 04/19 Dimensions (LxWxH): approx. 716 x 245 x 306 cm Redpfsxt Rtrsx Aazon Test drive possible No trade-ins Sold as-is, ex yard More info on request

Condition: new, Year of construction: 2025, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics SPINDLE AUTOFEED High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 Redpfx Aajrif T Dezjn COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system

Condition: new, Year of construction: 2025, The CORMAK WS32 table drill is a solid tool with high spindle stiffness. It has automatic left-hand rotation, large spindle stroke and a clear control panel. Constructed from the highest quality seasoned castings, it offers a powerful engine and CE certification. The maximum drilling diameter in steel is 32 mm and the maximum threading diameter is M24. Equipped with an MK3 spindle mount, it ensures stability and easy tool replacement. Perfect for professional and hobby use. Characteristics of the WS32 bench drill: High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Rsdpfxsrif Ude Aazen Technical data MAX. DRILLING DIAMETER IN STEEL 32mm MAX. THREADING DIAMETER IN STEEL M24 COLUMN DIAMETER 100mm SPINDLE TRAVEL 150mm SPINDLE-COLUMN DISTANCE 265mm MAX. SPINDLE-TABLE DISTANCE 390mm MAX. SPINDLE-BASE DISTANCE 745mm SPINDLE MOUNTING MK3 ROTATION SPEED RANGE 280, 400, 675, 1140, 1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 380 x 400 mm BASE DIMENSIONS 645 x 470 mm MACHINE HEIGHT 1370mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 230 kg DIMENSIONS 900 x 500 x 1400 mm Optional equipment cooling system

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth limiter. Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth limiter, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 20mm RPM RANGE 190-2700 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 120mm DISTANCE OF SHAFT FROM COLUMN 170mm DISTANCE OF SHANK FROM THE BASE 530mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 380mm COLUMN DIAMETER 70mm TABLE DIMENSIONS 280x280mm BASE DIMENSIONS 480x290 mm ENGINE POWER 750 W Rjdpfxjvzqrze Aazen HEIGHT 1120 mm WEIGHT 66kg Manufacturer: Cormak

Condition: new, Year of construction: 2025, Thanks to its rigid structure, the drill ensures perfect drilling quality. The tilting table allows for a wide range of processing. The device is equipped with an electronic speed indicator and a drilling depth indicator. The set includes a 65mm vice Machine description tilting table -45° to +45°, rigid machine structure, table with height adjustment using a toothed rack, three-arm lever, drilling depth indicator, electronic drilling speed indicator, laser pointer lighting of the working field Technical parameters MAXIMUM DRILLING DIAMETER 16mm RPM RANGE 350-2400 rpm POWER 230V SHANK HOLDER MK2 MAXIMUM SHAFT STROKE 90mm DISTANCE OF SHAFT FROM COLUMN 150mm DISTANCE OF SHANK FROM THE BASE 430mm RANGE OF ADJUSTMENT OF THE TABLE HEIGHT ON THE COLUMN 335mm COLUMN DIAMETER 60mm TABLE DIMENSIONS 240x240mm BASE DIMENSIONS 400x232 mm Rodpfx Aasrif H Eezen ENGINE POWER 700 W HEIGHT 910 mm WEIGHT U 46kg

Condition: new, Year of construction: 2025, The WS16 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Rsdpfx Ajrif S Reazon Machine characteristics High spindle stiffness Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 16mm MAX. THREADING DIAMETER IN STEEL M10 COLUMN DIAMETER 70mm SPINDLE TRAVEL 100mm SPINDLE-COLUMN DISTANCE 193mm MAX. SPINDLE-TABLE DISTANCE 330mm MAX. SPINDLE-BASE DISTANCE 613mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 480-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 265 x 285 mm BASE DIMENSIONS 360 x 480 mm MACHINE HEIGHT 1130mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 131.5 kg DIMENSIONS 600 x 400 x 1150 mm Optional equipment cooling system

Condition: new, Year of construction: 2025, The WS20 table drill with a reinforced structure is a general-purpose drill for performing operations such as drilling, reaming, countersinking, threading (using special holders for tapping tools). Drills enable drilling and threading with multi-spindle holders. The drill is characterized by high efficiency, precision of operations, low noise level, wide range of rotational speeds, centralized control panel facilitating work on the machine and ease of use. Machine characteristics High spindle stiffness Rjdporif Trsfx Aazon Threading by automatic switching of left-hand rotation Left rotation switch The headstock, column, table and column base are made of the highest quality seasoned castings Spindle and gear shafts made of hardened and heat-treated steel High engine power Large spindle stroke Clear control panel U-type spindle cover with limit switch, CE compliant Manually lifted work table with 360° rotation and mounting grooves The belt transmission cover is equipped with a safety limit switch CE certificate Adjustable drill chuck with key and Morse cone mounting A wedge for knocking out a cone Technical data MAX. DRILLING DIAMETER IN STEEL 20mm MAX. THREADING DIAMETER IN STEEL M16 COLUMN DIAMETER 85mm SPINDLE TRAVEL 135mm SPINDLE-COLUMN DISTANCE 260mm MAX. SPINDLE-TABLE DISTANCE 366 mm MAX. SPINDLE-BASE DISTANCE 678mm SPINDLE MOUNTING MK2 ROTATION SPEED RANGE 280-1875 rpm NUMBER OF ROTATIONAL SPEEDS 5 TABLE DIMENSIONS 300 x 320 mm BASE DIMENSIONS 376 x 566 mm MACHINE HEIGHT 1245 mm ENGINE POWER 1.1 kW POWER 400V NET WEIGHT 179 kg DIMENSIONS 800 x 450 x 1250 mm Optional equipment cooling system

Condition: new, Year of construction: 2025, The W25 table drill is a machine that combines power and precision. It is characterized by a solid, rigid structure, high efficiency and precision. The device is equipped with a swivel work table with adjustable height and threading functions with automatic change of the direction of spindle rotation. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch Technical parameters Max. drilling diameter 25 mm Max. spindle quill extension 125 mm MK3 spindle cone Spindle speeds 290, 420, 740, 1260, 2150 rpm Distance of the spindle axis from the column 240 mm Column diameter Redpfxjrif I Rj Aazjn 100mm Table dimensions 280x300 mm Base dimensions 590x375 mm Max. distance of the spindle tip to the table 367 mm Max. distance of spindle tip to base 630 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° The diameter of the quills is 50mm Motor power 1100W / 400V Dimensions 800 x 400 x 1100mm Weight 165 kg Included B22 self-clamping drill chuck 5-20mm MK2 drill chuck shank

Condition: new, Year of construction: 2025, The W16 table drill is characterized by a rigid structure and great performance while maintaining small size. It has threading functions and a swivel work table with adjustable height. It is a machine that combines power and precision, which is important in various applications. Machine description Threading function Automatic change of the direction of spindle rotation during threading Manual change of direction of rotation using a foot lever High spindle stiffness Setting the required drilling/tapping depth The drive is transmitted via a belt transmission Height-adjustable work table, tiltable from -45° (left) - +45° (right), with the ability to rotate 360° on the column The base is equipped with 14 mm wide T-slots The belt transmission cover is equipped with a safety limit switch No vice included! Technical parameters Max. drilling diameter 16 mm Max. spindle quill extension 100 mm MK2 spindle cone Spindle speeds 480, 800, 1400, 2440, 4100 rpm The distance of the spindle axis from the column is 193 mm Table dimensions 200x230 mm Base dimensions 528x360 mm Max. distance of the spindle tip to the table 315 mm Max. distance of spindle tip to base 556 mm Table rotation range in the horizontal axis ±45° Table rotation range around the column is 360° Motor power 750 W / 400V Rjdjrif Iuopfx Aazen Weight 90 kg Included: B18 self-clamping drill chuck MK2 drill chuck shank

Condition: new, Year of construction: 2025, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016A Vario bench drill is a compact and functional pillar drill for metal, designed for precision drilling operations in professional and workshop applications. Featuring stepless speed control, a robust construction, and versatile equipment, this model ensures maximum control over the drilling process and high work efficiency. Key Features Stepless speed regulation – speed range from 440 to 2600 RPM allows optimal adjustment to the material being processed. Durable cast iron construction – provides high rigidity and reduces vibrations during operation. Adjustable worktable – tiltable from -45° to +45° and height-adjustable via rack-and-pinion system. Laser guide and LED lighting – ensure maximum drilling precision and user comfort. Electronic speed display – enables full real-time control of parameters. 65 mm vice included – the machine is ready to work right out of the box. Construction and Technology The Z7016A Vario bench drill for metal is built on a solid 60 mm diameter column and a rigid 345 × 210 mm cast iron base. The machine’s body and worktable are made from precisely machined castings. The MT2 taper allows a wide range of tool fittings, while the 60 mm spindle travel enables deep hole drilling. With an overall height of just 870 mm, the unit is exceptionally ergonomic and portable. Precision and Performance Thanks to its 500 W (S1) / 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill allows efficient drilling in metal up to 16 mm in diameter. No need for manual gear changes – stepless speed adjustment significantly shortens setup time. The ergonomic three-arm feed handle, depth gauge, and precise spindle guidance system ensure high repeatability and hole accuracy. Applications The Z7016A Vario is a metal bench drill recommended for: Locksmith and repair workshops Maintenance departments Technical schools Small production lines and prototyping facilities Standard Equipment Redpfsxbzuvsx Aazjn 65 mm vice Laser drilling guide LED work area lighting Electronic speed display Three-arm feed handle Tilting table with rack-and-pinion height adjustment Technical Specifications Parameter Value Max drilling diameter 16 mm Spindle speed range 440 – 2600 RPM Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg