Used Equipment Support for sale (49,598)

Condition: ready for operation (used), functionality: fully functional, mileage: 53,114 km, power: 55 kW (74.78 HP), first registration: 10/2019, overall weight: 3,500 kg, fuel type: diesel, color: silver, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 02/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 6,043 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 Sweep Suction Machine + Winter Service, One Owner Major engine inspection with timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge upon sale. Machine version with new drive pedal system 3,131 sweeping operating hours 6,043 total operating hours 53,114 kilometers 4×4 all-wheel drive – Hydrostatic all-wheel drive system Including Kif snow plow, type CM 1600, 1500 mm wide (as new/has never been used in snow) or optionally with Kif front broom, type CM 1600, 1,300 mm wide, year 2019 (as new/has never been used in snow), not pictured Including Gmeiner salt spreader, type Husky 500V FS with support stands (as new, used twice for testing) Camera system with 270° all-round view Sweeping debris container in stainless steel Wheelbase: 1,600 mm Track width: 1,055 mm Fresh water tank: 180 liters Unladen weight approx. 1,900 kg Gross vehicle weight 3,500 kg Dimensions: Length 4,510 mm / Width 1,210 mm / Height 1,970 mm Travel speed 0–40 km/h Working speed 0–24 km/h Sound insulation package Selectable operating speeds: 1,600–2,400 rpm (ECO/Standard/MAX) Engine: Water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics – Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Gross vehicle weight: 3,500 kg Unladen weight: 1,950 kg Other operational possibilities offered by additional HAKO attachments such as sweeping broom, snow blade, and lawn mower (not included in delivery) Subject to errors, changes, and prior sale. We sell exclusively under our General Terms and Conditions and excluding any warranty. Subject to errors, changes, and prior sale. We are available continuously from Monday to Friday, 9:00 a.m. to 5:00 p.m., Saturday by appointment. Appointments outside these hours can be arranged by phone. We gladly accept your current used equipment/vehicle as trade-in. Dkjdsyf Egfopfx Afpsh Sales to commercial customers and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale reserved.

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine is as new This machine is suitable for industrial cleaning, both for everyday tasks and for very large projects. A key advantage of this machine is the lack of complex new-generation electronics, making it one of the most robust and aggressive machines on the market. The machine is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €14,900 NO VAT NO TAX This is one of the best machines in the world. It is entirely free from unnecessary electronics, ensuring reliability and keeping maintenance costs low. For inquiries or to arrange a viewing, please contact us – Dr.Dryice. All machines sold come with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. Dkedpfx Aswg R Rmsfpeh New Cold Jet machines available on request – please contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine dry ice blasting unit – dry ice blasting | dry ice machine | dry ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Dry ice blasting machines, various Cold Jet models Cold Jet dry ice machine maintenance and repair

Condition: ready for operation (used), functionality: fully functional, mileage: 60,430 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 01/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 8,211 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 suction sweeper and winter service vehicle from first owner Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter will be carried out free of charge by us upon sale. Machine version with new drive pedal system - 4,301 sweeping operating hours - 8,211 total operating hours - 60,430 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snow blade type CM 1600, 1,500 mm wide (as new/has never been used on snow), or optionally with Kif front brush type CM 1600, 1,300 mm wide, year 2019 (as new/has never been used on snow), not shown in the pictures - Includes Gmeiner salt spreader type Husky 500V FS with support stands (as new/used only twice for testing) - Rear-view camera - Stainless steel debris container Technical specifications: - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Unladen weight: approx. 1,900 kg - Permissible GVW: 3,500 kg - Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Noise insulation package - Selectable working speeds: 1,600 – 2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel - Low emissions, Euro 5 - Fuel tank: approx. 60 liters - Hydrostatic all-wheel drive - 2-circuit high-pressure hydraulics: Circuit 1 (front): 0–50/0–70 l/min, 225 bar. Circuit 2 (rear): 0–20/25/30 l/min, 195 bar - Hydraulic service brake operated via foot pedal - Cabin with air-suspended driver's seat - Air conditioning / heating - Water treatment system - Hydrant connection - Dosing system - Permissible GVW: 3,500 kg - Unladen weight: 1,950 kg - Other application options possible with additional HAKO attachments, such as sweepers, snow ploughs, and lawn mowers (not included in the offer) Errors, changes, and prior sale reserved. We sell exclusively under our terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. Dedpex Ir Txofx Afpskh Our business hours are Monday to Friday from 9:00 to 17:00, Saturday by appointment; outside these hours, appointments can be made by telephone. We are happy to accept your used equipment/vehicle as a trade-in. Sales to businesses and exporters are given preference; this applies to our entire vehicle inventory. The above information is non-binding; errors, changes, and prior sale excepted.

Condition: ready for operation (used), functionality: fully functional, mileage: 51,892 km, power: 55 kW (74.78 HP), first registration: 09/2018, overall weight: 3,500 kg, fuel type: diesel, color: white, axle configuration: 4x4, maximum load weight: 1,600 kg, empty load weight: 1,900 kg, next inspection (TÜV): 01/2028, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 7,808 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 suction sweeper and winter service vehicle from first owner - Major engine inspection including timing belt, water pump, oil, oil filter, fuel filter was carried out at 51,892 km in 10/2025 - Machine version with new drive pedal system - 3,952 sweeping operation hours - 7,808 total operating hours - 51,892 kilometers - 4×4 all-wheel drive – hydrostatic all-wheel drive system - Includes Kif snow plow, type CM 1600, 1500 mm wide (as new / never used in snow) or optionally with Kif front broom type CM 1600, 1,300 mm wide, year 2019 (as new / never used in snow), not shown in pictures - Includes Gmeiner salt spreader, type Husky 500V FS with support stands (like new / used twice for testing) - Rear-view camera Dedpfxsx Ir Ivj Afpskh - Litter container made of stainless steel - Wheelbase: 1,600 mm - Track width: 1,055 mm - Fresh water tank: 180 liters - Curb weight approx. 1,950 kg - Permissible total weight: 3,500 kg - Dimensions (L x W x H): 4,510 mm x 1,210 mm x 1,970 mm - Driving speed: 0–40 km/h - Working speed: 0–24 km/h - Sound insulation package - Selectable working speeds: 1,600–2,400 rpm (ECO/Standard/MAX) - Engine: water-cooled 4-cylinder VW industrial diesel engine - Low emissions Euro 5 - Fuel tank approx. 60 liters - Hydrostatic all-wheel drive system - 2-circuit high-pressure hydraulics: Circuit 1 (front) 0–50/0–70 l/min 225 bar; Circuit 2 (rear) 0–20/25/30 l/min 195 bar - Hydraulic service brake via foot pedal - Cabin with air-suspended driver's seat - Air conditioning / heater - Water treatment system - Hydrant connection - Dosing system - Permissible total weight: 3,500 kg - Curb weight: 1,950 kg - The spreader is powered and controlled by the machine’s hydraulic system - Further applications possible with additional HAKO attachments such as brooms, snowblades, and mower (not included) - Subject to errors, changes, and prior sale Sale exclusively according to our general terms and conditions and under exclusion of any warranty. Subject to errors, changes, and prior sale. We are available for you Monday–Friday from 9:00 a.m. to 5:00 p.m. continuously; Saturday by appointment; outside business hours, telephone appointments possible. We are happy to take your current used equipment/vehicle in part exchange. Sales to trade professionals and exporters are given preference, this applies to our entire vehicle inventory. The above information is non-binding; subject to errors, changes, and prior sale.

Condition: ready for operation (used), functionality: fully functional, For sale: Complete production line for aluminium frames & insect screens Ideal for window manufacturers, craft businesses & producers Available for sale is a fully coordinated set of machinery and workshop equipment for the production of: - Aluminium frames for timber-aluminium windows - Renovation aluminium frames - Fixed insect screen frames The equipment is suitable both for existing companies looking to increase their manufacturing depth as well as for start-ups or newcomers wanting to take over a ready-to-use production line immediately. Special features: - Preferred sale as a complete package - Partial sale of individual machines possible - Field-proven, functionally matched machines - Independent in-house production possible - Significant cost savings compared to purchasing new equipment Instruction, training & knowledge transfer: Upon request, I offer buyers personal instruction and job training. The goal is to pass on the specialist knowledge built up over decades. The training can include: - Introduction to the complete production process - Optimal machine settings - Cost-effective production - Avoidance of common mistakes - Assistance with commissioning Benefits for the buyer: - Immediate start of production - Reduced dependence on suppliers - Expansion of offering portfolio - High value creation - Know-how transfer included Djdpfx Aox Nbnhjfpekh Reason for sale: The sale is due to age and a change of profession. Further information: - List of machines and details available on request - Scope of training negotiable - Collection by arrangement If interested, please get in touch. Open to all options and arrangements. Double mitre saw Elumatec DG 79: Comes with blades for aluminium cutting. Year of construction 1996. Cutting length 4.5m. Digital length display. Overhauled in 2024 for 6,500. New feed units, belts and bearings. Fully operational. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Cut-off and mitre saw Graule ZS 170N: With 420 mm saw blades for aluminium cutting. Fully equipped. Year of construction 2004. Saw height 170 mm. Left roller track 6 m with manual stop. Right roller track 5.2 m with digitally adjustable stop from the saw stand, adjustable and swivelling! Pneumatic material clamping and mist spray unit. The machine can be tilted on both sides via handwheel. Compound cuts no problem! Digital electronic angle display for both axes. Laser guide on saw blade. Cross fence for acute angle cuts. With machine stand. Please note: The blue tool drawer cabinet and wall-mounted extraction system are not included in the offer. Set up and ready for demonstration. Machine available due to business closure at the end of March. Sale with invoice. VAT can be shown separately. Notching mill Graule AKF1: With 8 mm high-performance cutter for aluminium. I have used this machine to notch aluminium profiles. It also works equally well on wood or plastic profiles. With machine stand made of aluminium profile system. Manual workpiece clamping. Set up and ready for demonstration. Machine available due to business closure at the end of March.

Condition: used, Year of construction: 2003, Conveying equipment Dksdpfxexta T Ue Afpeh NEW Omap Year of manufacture 2003

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Dkjdpfx Afjfz U Nbjpjh Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ Dkjdpfsflk Awex Afpoh At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, Our 400 Ton/Hour Capacity Stationary Crushing and Screening Plant consists of 40 m³ vibrating feed bunker, wobbler feeder, CLK-110 jaw crusher, impact crusher, tunnel systems, stock and return belts, stock bunkers, control cabinet and automation system. The products transferred to the feed bunker are separated from dirt and mud in the first stage of the double-stage wobbler feeder and bypassed by the bypass belt conveyor In the second stage of the wobbler feeder, the products that are suitable for the jaw crusher are sent to the stock area with the transfer belt. The jaw crusher, with a maximum feed of 800 mm, crushes the products and sends them to the fist vibrating screen. In the first vibrating screen, the products are separated in 0-40 mm, 40-90 mm sizes and sent to the stock area. Products above 90 mm size are transferred to the secondary crushing and screening unıt. The products transferred to the tunnel system are sent to the 12-13 S impact crusher. The products crushed in the impact crusher are separated in different sizes by vibrating screen and sent to the stock area. The products stored in the stock area are transferred to the pan feeder by passing through the tunnel system according to the need. Dedpfx Afox N Nucspskh The vibrating pan feeder transfers the products to the stock bunkers with the transfer belt conveyor All equipment of the crushing &screening plant is controlled from 3 different automation panels.

Condition: used, Technical details: max. temperature: 150° Grad voltage: 380 Volt V / Hz current- max.: 6,5 A weight: 65 kg dimensions L x W x H: 0,68 x 0,22 x 0,58 m Working Area / Application: water tempering system transportable - connection coolant water: inlet and outlet Ø 12mm internal with bayonet connection - connection circulating medium: inlet and outlet Ø 12mm with bayonet connection - control via control panel equipment: - 1400mm connection cable Dkedpfx Asu N Ag Refpoh Optional test run possible. *

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device Dsdeu Nvixspfx Afpjkh movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Year of construction: 2009, condition: used, Technical details: tool taper: Ø 54 voltage: 3Ph AC 400V / 50-60 Hz V / Hz compressed air: Anschluß: 6 bar total power requirement: 11 kW Total weight, approx.: 120 kg dimensions L x W x H: 0,7 x 0,65 x 1,7 m Application: for secondary quick tool change through targeted inductive heating. Induction shrink fit unit with water cooling (tank 30 litres, built into the housing) Cooling medium: emulsion for Ø 3 - 50mm HM (carbide) and Ø 6 - 50 HSS tools Tool holder Ø 54mm Concentricity < 0,003mm ThermoGrip chuck Dedpfjwp I S Hox Afpjkh Operation via control panel *

Condition: like new (used), Handling equipment for a finger jointing line. Roller conveyors, wide- and narrow belt conveyors, a trim saw conveyor, Dkjdpfx Aed Duz Esfpsh trim saws, etc. See pictures. With documentation. Good condition, made by Martek in Finland.

Condition: new, Year of construction: 2023, operating hours: 1 h, functionality: fully functional, Equipment: rotational speed infinitely variable, BE 2500 Liter Steel Enamel Reactor Agitated Tank, condition unused CRYOLOCK® 2-stage agitator, enamel color blue, conductive enamel layer, support ring construction. Nominal capacity: 2500 liters, total volume: 3500 liters. Heating/cooling via double jacket. Double jacket capacity: 430 liters Operating pressure in the vessel: -1/+4 bar, double jacket: -1/+8 bar, operating temperature: -30/+160 °C, bottom outlet valve. Total weight approx. 3800 kg Manufactured according to AD-2000 Ed. 2012 Drive motor and gearbox ATEX certified, gearbox infinitely adjustable. Technical details are available on request. Please contact us for a written quotation. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH. We therefore guarantee highly professional execution of all work. For further questions or to contact us, please feel free to reach out at any time, we look forward to hearing from you. Cycron GmbH, Switzerland Dodpoyfg Azsfx Afpekh

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, The FW series of automatic packaging machines with flow pack system, designed according to Industry 4.0 and IoT (Internet of Things) technological platforms, is the family of machines that completes the SMIPACK range. The version with rotary bar sealing system is composed of 7 models (five with top reel, three of them dedicated to the entry-level segment, and two with bottom reel) and packs a wide range of products with irregular shapes and small dimensions that arrive at the machine either loose (single doses) or previously grouped (multipack); the products are placed in packages made from single or laminated flexible material with a maximum output of 200 products/minute (depending on the selected model). The film sealing & folding systems, combined with the dynamic and adjustable forming device, make process regulation on the FW models versatile and fast. Dkjdpfx Afjyf Ed Depjh

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: HERMA H500, With this HERMA labeler, top labeling is guaranteed to be flawless. At both high and low speeds, this is an extremely precise labeling machine! Can be configured with a conveyor from, for example, BVM or Smipack, used or new. Dkedpjyf Ebpjfx Afpeh

Condition: like new (used), Year of construction: 2024, functionality: fully functional, product height (min.): 210 mm, The SL series of L-seal hood packers is suitable for those needing packaging solutions for low production volumes. Therefore, it represents the 'entry level' of SMIPACK packaging machines, while maintaining most features of the S series. The SL series of L-sealing hood packers offers output rates of up to 300 packs per hour. Sealing bar: 440 x 300 mm. Dsdpfx Afeyf D Uzopokh

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 85-70, Self-cleaning overband magnet with frame. Suitable for conveyor belt width of 1200 mm. Working length 1470 mm x working width 645 mm. Dsdox Tid Ejpfx Afpekh

Condition: used, functionality: fully functional, Various 173 E collets and 173 E collet chucks Dkjdeycp Iuopfx Afpjh Used / functional It is not necessary to purchase the entire lot; individual items can also be acquired. Collets 173 E: €15.00 each Collet chucks: €150.00 each

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine - Like New This machine is suitable for industrial cleaning, both for delicate and very large-scale projects. Its key advantage is the absence of new generation electronics, making it one of the most robust and reliable machines on the market. Designed for aggressive cleaning tasks, the machine is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following accessories: - COLD JET AERO 75 DX DRY ICE (12 HOURS OPERATING TIME) - 1 x 20’ Blasting Hose - 1 x Coldjet Applicator - 2 x New Nozzles Price: €21,800 This is one of the best dry ice blasting machines worldwide. No sensitive electronics inside, which ensures high reliability and low maintenance costs. Estimated new price: €42,000 For questions or to arrange a viewing, please contact us at DrDryice. All machines are sold with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. We also offer new Cold Jet machines. Contact us for information. Worldwide shipping available. Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Dkodpfxjwg R Eds Afpjh Dry ice blasting equipment – dry ice blaster | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines - Cold Jet - various models Service and repair for Cold Jet dry ice machines NOZZITEC

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SANDERS (€2000) With this machine, you can also use loose 3mm pellets! And, of course, blocks. As good as new, 1-year warranty Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning, both for small and very large projects. The advantage of this machine is that it is not packed with next-generation electronics. It is one of the most aggressive machines on the market. This unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Blasting package including the following equipment: COLD JET i3 Microclean (12 HOURS OF USE) 1 x 20' blasting hose 1 x Coldjet applicator 1 x nozzle Price: €22,500 One of the best machines in the world. No electronics. This means reliability and low maintenance costs. For questions or to schedule a viewing, please contact DrDryice. All machines sold are supplied with a 1-year warranty. Repairs and maintenance for Cold Jet machines are available. We also supply new Cold Jet machines. Contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale buy dry ice blasting machine Dcst Eyh Eewg R Edeaok Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines i3 Microclean Dry ice press Dedsxga Tzepfx Afpjkh NOZZITEC

Condition: new, Year of construction: 2026, functionality: fully functional, compressed air connection: 20 bar, total width: 500 mm, total length: 550 mm, total height: 1,000 mm, overall weight: 96 kg, input voltage: 230 V, warranty duration: 24 months, 💥 NozziTec X-Force Dry Ice Cleaning Machines – New & Immediately Available! 💥 Dry ice blaster / Cold Jet Quality Are you looking for top-quality industrial cleaning technology for your business? We offer brand-new NozziTec X-Force dry ice cleaning machines, exclusive and ready for immediate use. NozziTec is a leading manufacturer with over a decade of experience in dry ice cleaning technology — machines designed for maximum efficiency, reliability, and safety. 🛠️ Why choose NozziTec X-Force? ✅ Professional quality: Premium Polish engineering with rugged construction and high-grade components; ideal for demanding industrial environments. ✅ Durable & reliable: 24-month warranty and excellent support. Dkedpfx Afeyf Aaispjh ✅ Efficient & clean: Clean surfaces without water or chemicals — fast, sustainable, and environmentally friendly. ✅ Versatile: Perfect for maintenance, production cleaning, renovations, or deep degreasing in workshops, industry, and technical services. 📦 Available models 🔹 X-Force M1 – Efficient, low air consumption, and ideal for light to medium cleaning tasks. €21,000 🔹 X-Force M2 – Powerful all-round machine with extensive options for industrial applications. €23,000 🔹 X-Force M3 – 20 bar Unmatched cleaning power for the toughest conditions. €25,300 📌 Optional: Full range of accessories, nozzles, blast hoses & service kits available. 💼 Perfect for, among others: 👉 Injection molds and dies 👉 Industrial machinery & production lines 👉 Removal of paint, grease, oil, and fire residues 👉 Restoration and renovation of metal, stone, or wood 👉 Cleaning of electrical equipment (moisture-free) 📞 Quotation, demo, or questions? Interested? Request a quote, demonstration, or non-binding offer today! We are happy to assist you with tailored advice. Worldwide shipping.

Year of construction: 2010, condition: good (used), functionality: fully functional, 1 x Nimo KG / Unitech barrel tipper with chute. Model - SKV 300 C2. Serial no - 11117. Date of manufacture - 2010. Tipping height - 1600mm high. Maximum load - 250 kg. Electrical requirements - 380-400 V / 50 hz / 3 phase. Dedpfx Aeyg R N Isfpokh Power - 2.7 A. Overall dimensions - 1000mm long x 730mm wide x 2200mm high (2500mm when tipping).

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, TRIVENTEK BL60 Includes nozzle case. Dksdpjyfwb Ujfx Afpjh For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance of Cold Jet machines. Worldwide shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Asco NOZZITEC Used Cold Jet machine for sale Dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the advanced safety and performance test package “P Plus”. This device is not a standard laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage systems. Key Added Value: The unit is designed to reliably detect, monitor, and contain critical battery events safely—including up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the device do specifically? (Section 2 – Performance & Application) – Conduct aging tests on lithium-ion cells – Performance tests (charge/discharge cycles under temperature) – Continuous temperature runs and thermal cycling tests – Testing of non-energized and cyclically energized cells – Reproducible, precise temperature control throughout the entire usable space – Safe execution of tests under realistic thermal conditions – Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: – Battery & cell manufacturers – Research and development laboratories – Test laboratories & safety testing – Automotive / e-mobility / energy storage sectors The P Plus package transforms the KB 720 into a genuine battery safety test cabinet: Integrated Safety Features: – Automatic & manual CO₂ fire suppression system – Smoke detector with optical & acoustic alarm – Mechanical double door locking (secure containment) – Spark protection in the interior compartment – Exhaust connection with reversible overpressure flap – Connections for external inerting (e.g., nitrogen) – Emergency stop / manual release of extinguishing system – Ports for charging and measurement cables Result: The device is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames can occur, but not explosion or uncontrolled propagation. This is not an abuse or destruction test device, but a secure, standard-compliant test chamber for real-world operating and fault scenarios. Technical Core Data: – Temperature range: –5 °C to +100 °C – Interior volume: approx. 698 liters – Shelves: 4 × stainless steel – Max. load per shelf: 45 kg – Max. total load: 100 kg Electrical Data: – Mains connection: 200–240 V AC – Frequency: 50/60 Hz – Phases: single-phase – Power consumption: approx. 2.1 kW – Circuit protection: 16 A – Refrigerant: R134a – Protection class: IP 20 Dimensions & Weight: – External (W × H × D): approx. 1250 × 1950 × 900 mm – Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? – Genuine battery safety test chamber – Suitable for EUCAR Hazard Level 5 – Integrated CO₂ extinguishing system – Large chamber (≈700 l) Dkodpox Sc Inefx Afpeh – High market value & resale attractiveness – Weight: approx. 285–300 kg – Condition: used – Scope of delivery: (see image) (Technical data subject to change and errors excepted!) For further questions, we are happy to answer your call.