Used Evolution for sale (734)

Condition: used, Technical details: spindle passage: 60 mm turning length: 45 mm turning diameter: max. 56 mm drill depth: max. 70 mm revolution per minute: 48 - 1500 (spindle) U/min threading: Drehzahl: 24 - 750 U/min tool turret - number of stations: 8 total power requirement: 5,5 kW weight of the machine ca.: 2,4 t space requirement of the machine approx.: L:2,1x1,0x1,8 m Cam-controlled automatic lathe according to template. Itedeu Iwyispfx Aanjr Workpiece is clamped via clamping cartridge. Turret head: disk turret Hahn&Tessky Esslingen, tool path 80mm, adjustment 36mm, distance collet/turret head min./max.: 72/188mm 2 pieces turning support, working stroke 45mm 2 piece cutting off support, working path approx. 40mm Cooling water system Machine is not connected. Sale at a low selling price. *

Year of construction: 2003, condition: excellent (used), Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Itodpfx Aaepwbfksnjr Nos. pallets 5 SK40 IKZ 25-50 bar Measuring probe Tool breakage monitoring KSS cooling New spindle in 7/2022. Spindle hours 4800 h April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, subject to error.

Year of construction: 2020, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 866071473, For sale is a Hobart AUPT-10A Premax double hood dishwasher, year of manufacture 2020. The machine is in like-new condition with only 8 operating hours. This premium hood-type dishwasher offers double capacity for simultaneous washing of two racks. The PERMANENT-CLEAN soil removal system directs coarse debris into an external filter, reducing operating costs and protecting the machine. To ensure hygienic rinse temperatures even with a cold water connection, the machine features an automatic program time extension. For corner installations, we recommend keeping the right side of the machine accessible for maintenance. For water hardness above 1°dH, we recommend a water treatment system. The machine has been fully tested in our in-house workshop and is both visually and technically in like-new condition. Manufacturer’s RRP: €36,235 net You will receive an invoice with VAT shown. Our used equipment service includes: 1-year warranty on electrical components (restricted to parts replacement, without labor costs) High-quality branded equipment at fair prices Professional inspection/refurbishment and expert cleaning Tested and fully functional – or your money back Flexible options for shipping or self-collection Expert advice – before and after purchase Provision of user manuals, wiring diagrams & spare parts Inspection according to DGUV V3 The machine features the following advantages: PERMANENT-CLEAN soil removal: Revolutionary filtration eliminates manual pre-washing. All coarse and fine soil is immediately drained to an external filter. This saves costs and protects the machine. VISIOTRONIC-TOUCH control: Color touch screen with text and graphic display, single-button operation, and cycle progress indicator. SENSO-ACTIVE resource management: Control system continuously monitors water contamination and adjusts rinse water quantity in real-time to the level of soil. CLIP-IN wash and rinse arms. POWER-PLUS WASH PROGRAM: Activatable high-pressure program for heavily soiled ware and utensils. ROTOR-X WASH SYSTEM: Cross-wash arms and special wide-angle nozzles optimize water distribution and increase contact time on items. Technical data: W x D x H: approx. 1345 (+200 Permanent Clean System) x 915 x 1510 mm Height with hood open: approx. 1995 mm Power supply: V: 400 / kW: 23.5 / A: 36.1 / Hz: 50 Weight: 252 kg Serial number: 866071473 Year: 2020 Condition: Like new, fully functional Further information: Rack size: 500 x 500 mm Tank volume: approx. 80 liters Water consumption: approx. 1.4 L/rack Loading height: 440 mm Output: up to 140 racks/h, 2520 plates/h, 5040 glasses/h Isdpfsxz Ey Nox Aanstr 8 automatic programs: short, standard, intensive, eco, continuous wash, cutlery, hygiene, and starch-removal programs Heat and sound insulated hood Self-cleaning program Filter contamination sensor Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Iodpfxox Ihiis Aanstr Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, The LabCenter 260 CNC is a robust and compact Vertical Machining Center designed specifically for CNC training and the production of small workpieces. This innovative machine offers the full functionality of larger production machines while being mobile and professional, making it ideal for laboratories and training environments. Equipped with the SIEMENS 808D Advance control, the LabCenter facilitates an intuitive introduction to CNC applications. It boasts a continuously variable main spindle speed of up to 5000 revolutions per minute and features precisely machined cast iron frames, durable dovetail guides, and preloaded ball screws with servo drives on all axes. With a maximum travel of 160 mm on the X-axis and a table size of 400x145 mm, this C-Frame Vertical CNC Center enhances productivity with its efficient 4-station tool changer and mobile base, which allows for convenient tool and material storage. Ensure seamless operation with the included electronic hand-wheel, central lubrication, and comprehensive operating manual. KNUTH guarantees quality and precision in all aspects. To experience the benefits of this Vertical Machining Center, order online today. Iedpsuy Ihhofx Aanjtr

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: P177ZG753, Technical characteristics: # Machining Workspace: X 500 mm; Y 400 mm; Z 330 mm # Axis Description: 3 LINEAR AXES (X, Y, Z) + 1 rotary table axis (A-axis) with index dividing head, direct angular measurement system, number of revolutions 50 min⁻¹, accuracy +/- 5" # A-axis Swivel Range: +/-170˚ # Maximum Clamping/Workpiece Dimensions: 650 x 400 mm; max. weight 300 kg # Rapid Traverse: X/Y/Z 54 m/min # Spindle Speed: 100–10,000 rpm, spindle motor power 11 kW # Spindle Taper: BBT30 (with internal cooling) # Automatic Tool Changer: 1x21 tools, chip-to-chip average time 1.5 sec # Maximum Tool Size: Ø40 mm / length max. 200 mm / 2 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 20 kVA / 22A Dimensions: # Installation space: approx. 1.65 x 3.2 m (with chip conveyor) x 2.8 m # Weight: approx. 8,500 kg Equipment includes: # This 4-axis FANUC Robodrill α-D21LiB5 was manufactured in 2016. Ideal for precision machining, this vertical machining centre offers robust performance and reliability. # CNC Control: Model 31i model b5 # 4th axis and tailstock: Fanuc DDR-TiB 178DU039 2017/08 and TSUDAKOMA tailstock # Chip extractor & coolant filtration unit max. 40 bar: Mosnic model 1641/2010 # Spindle, Guideways, and Electrical Cabinet Cooling Systems # Oil Vapor Absorption/Recovery System: Bristol model B 1000 EF # Fire suppression: Kraft & Bauer # Part presence detection: with low pressure air sensors # Automation: Lateral door automatic and interface ready for automation Itjdpfx Aasxxt Ehsnor # In-process inspection: Renishaw TRS2 # Documentation: incomplete Machine condition: NOT WORKING # Hydraulic unit defective # Two emulsion pumps # Guideway lubrication pump # Safety switch Euchner

Condition: used, Technical details: Itedpfx Aaeu Idlfensr vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm control: Siemens 840D diameter of clamping surface: 3500/5800 mm turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical special CNC machining center application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. Ijdpfex Db I Ijx Aanotr - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Condition: used, Year of construction: 2020, CYKLOS TriFold 360 Folding Machine?for connection to creasing machines (e.g. AirSpeed 450 or others) The CYKLOS TriFold 360 folding machine can be linked to the automatic creasing and perforating machine CYKLOS GPM 450 Speed or CYKLOS AirSpeed 450 (or other comparable creasing machines) to operate as a fully automatic creasing and folding system. Folding is achieved through the combination of manually adjustable fold plates and large-diameter rubber rollers – a simple and cost-effective yet revolutionary solution. All parameters can be adjusted according to the specific application and the speed of the creasing machine.? Special Features - easy connection to CYKLOS creasing and perforating machines AirSpeed 450 or GPM 450 Speed possible? - connection to a wide range of creasing machines from various manufacturers possible? - fold plate adjustment is manual? - standard fold types marked on fold plates: single fold, letter fold, zigzag fold, gate fold, parallel fold? Technical Details - paper weight: 100 – 350 g/m²? - paper size: max. 620 x 360 mm? - folding speed: up to 6,000 sheets/hour (depending on the speed of the creasing and perforating machine)? - easy operation and adjustment of feed, folding and delivery speed as well as suction air?transport table: L620 x W360 mm? - 2 interchangeable lower fold plates for different paper weights? - mobile stand with castors for easy handling - connection: 230 V / 50 Hz? - dimensions: L 1635 x W 565 x H 1310 mm? - weight (net): 113 kg Ijdpfx Ajxr Ah Soanotr All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation Isdpex Ihg Isfx Aanstr CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, The KF 200 is a robust Edge Beveling Machine from KNUTH, designed for efficient chamfering, deburring, and 45° beveling of steel, aluminum, and a variety of other materials. Its compact dimensions and simple operation make it particularly well-suited for large workpieces, including heavy metal sheets and long profiles. With tungsten alloy blades, the KF 200 offers superior tensile strength, hardness, and longevity, ensuring that demanding tasks are executed with precision. This machine operates at a speed of 3,500 revolutions per minute and can achieve chamfer heights ranging from 0 to 5 mm, making it versatile for different applications. Standard equipment includes a set of cutting inserts and an operator manual, allowing you to start working immediately. Whether you're preparing weld joints or performing intricate deburring tasks, the KF 200 stands out in the Edge Beveling Machines category. To enhance your production capabilities, request a quote today and elevate your sheet metal processing with KNUTH. Itjdpeq Ny R Sefx Aaner

Condition: used, Year of construction: 1998, Price: On request Shredder opening:1000 mm x 800 mm Rotor diameter: 230 mm Number of rotor revolutions: 80 to 120 rpm Ijdpfswh Nbgjx Aanstr Main motor power 18 HP Output per hour: 500 to 1,500 kg per hour Air discharge speed: 20 to 30 m/sec. Slider with: Adjustable hydraulic feed ram Transport dimensions: LxWxH 3x1.5x1.5m - Year: 1998 - Documentation available: No - CE certificate present: No - Serial number: 273407 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Technical details: x-travel: 1000 mm y-travel: 1000 mm z-travel: 500 mm B-axis (table): 360 ° Isdpfx Aaou Idm Nonstr spindle taper: HSK A63 working spindle range of revolution per minute : 15000 U/min rotary table: 260 mm control: Andronic 2060PKM feed: 1 - 5000 mm/min rapid traverse X,Y: 15 m/min. rapid traverse Z-axis: 12 m/min total power requirement: ca. 42 kW weight of the machine ca.: 6,0 t dimensions electric cabinet LxWxH: 2,4x0,6x2,2 m dimension machine xH: 3,5x2,4x3,2 m 5-axis BAZ in parallel kinematics suitable for prototypes. i.D. *

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 2460062, Technical Specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis Description: 3 Linear Axes (X, Y, Z) + 1 Rotational Table Axis (A-axis) with index divider head, equipped with direct angular measuring system, number of revolutions: 50 minˉ¹, accuracy +/- 5" # Maximum Clamping / Part Size: Ø 575 x 830 mm; maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z: 65/75/75 m/min; Positioning Accuracy Tp: 0.008 mm # Distance Between Spindles: 300 mm # Spindle Speed: 1–17,500 rpm # Spindle Interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic Tool Changer: 2 x 32 tool positions, chip-to-chip average time: 2.5 sec # Max. Tool Dimensions: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Specifications: # Voltage: 3x400V / 50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: Iodpsxw Syuefx Aanotr # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Conveyor: Knoll Type 550 K-1 # Oil Cooling System # High-Pressure Oil Filtration System (max 80 bar): Knoll VRF 450_2350 # Cooling System for Shaft, Guides, and Switchboard # 2 Oil Lubrication Units # Oil Vapor Extraction/Recovery System: IFS Vario E2000 (2,000 m³/h) # Fire Suppression System: Kraft & Bauer # Part Presence Detection: via low-pressure air sensors # In-Process Control: Marposs T25 # Tool Breakage Monitoring and Length Measurement: inductive sensor # Tool Holder Detection in Work Spindle Machine Condition: Operational

Condition: excellent (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-4E Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Iodpfex Ig Ttex Aanotr Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 1978, Technical details: table surface area: 1970 x 400 mm distance between table/spindle: min./max. 150 / 250 mm rapid traverse: 1 / 2 m/min revolution per minute: Frässpindel: 112 ... 1400 / 12 step U/min milling spindle taper: DIN 2019 = Nr. 40 (SK40) axial adjustment: manuell = 150 mm quill feed: 0,012 / 0,025 / 0,05 mm/U feed range - horizontal: Frässchlitten: 8...100 / 12 step mm/min total power requirement: ca. 8,4 (10,5 kVA) kW machine weight approx.: 3000 kg dimension machine xH: 3,05 x 2,7 x 2,0 m wedge-groove milling machine Application: Milling of straight and helical grooves. Multiple groove milling with automatic program sequence. Further features: - distance spindle axis / lower edge counterholder: 55 mm - axial movement of the counter bearing sleeve 50 mm - milling carriage movement horizontal 1000 mm (automatic + manual by hand) and vertical 100 mm by hand + max. 5mm automatic/hydraulic Equipment: - chip container 470x300x300mm - 2x oil collecting basins (3200x1500x70 and 3200x800x60mm) - some accessories/tools Isdpfx Aeu Ndhijanetr *

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm Isdpfx Asu Nigkjanetr revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm Ijdpfju Idnmox Aanotr z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part Isdpfx Aaeu Idn Hjnetr total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm Itedou Id D Ujpfx Aansr distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Year of construction: 1993, Technical details: rotary table diameter: 2x700 mm grinding height: 200 mm grinding head - power requirement: 15 kW max. dia. of grinding wheel: 400 mm grinding spindle speed: 1400-2800 stufenlos /continous U/min automatic feeds: 0,001-0,02 weight of tools max.: 650 kg table speed: 5-10 m/min rotary table revolutions per minute : 5-10 stufenlos U/min rotary table: Querbewg. 0,2...10 m/min total power requirement: 49 kW weight of the machine ca.: ca. 12,0 t dimension machine xH: 6,0x3,0x2,8 m dimensions electric cabinet LxWxH: 2,0x0,55x2,2 m ROTARY TABLE SURFACE GRINDING MACHINE - 2 magnetic rotary tables each Ø=700mm - diamond roller dressing device - without coolant unit i.D. Itedpsu Ngp Nofx Aaner *

Condition: used, Technical details: turning diameter over bed: 460 mm turning diameter over support: 350 mm turning length: 1500 mm centre height: 250 mm spindle bore of work spindle: 52 mm range of revolution per miute: 35 -1800 U/min tailstock quill adjustment:: 230 mm tailstock taper MT: MK4 weight of the machine ca.: 2,7 t dimension machine xH: 2,88 x 1,2 x 1,5 m Coolant pump with feed to manual valve Iodpfx Ajwa Nwfsanstr Accessories: Steady rest D=130mm closed 3 Jaw chuck D=315mm from Forkhardt F315 *

Condition: used, Year of construction: 1978, Technical details: x-travel: 1200 mm y-travel: 500 mm z-travel: 650 mm w-axis: 90° rechts/links Isdpfx Aaou Nc Rvjnstr table-size: 1600x500 mm revolution per minute: 24 - 1600 / 12 step U/min tool taper: SK 50 distance spindle nose and table: min/max: 150/800 mm distance spindle center to column: min/max: 200/800 mm table surface area: 1200 x 520 mm total power requirement: ca. 25 kW weight of the machine ca.: 5600 kg dimension machine xH: 2,4 x 3,0 x 2,4 m dimensions electric cabinet LxWxH: 1,1 x 0,5 x 1,8 m Further technical specifications: - horizontal spindle: rpm 25 - 1200 with 12 level, taper SK50 - controlled via control panel - incl. coolant device - equipped with measuring system manufacturer Millvision *

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) * Iedpfx Aasu Ix Hdonetr

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U Ijdpfswid Auox Aanjtr column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *