Used Extracted Wall for sale (10,162)

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Blsdpfeyibg Tox Aqrop Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0118703/99-1, functionality: fully functional, power: 55 kW (74.78 HP), input voltage: 400 V, type of input current: DC, volume flow: 1,200 m³/h, intake manifold diameter: 150 mm, filter area: 8 m², For sale is a Bristol 'TF' B 250 extraction unit. The item is in good condition and is ready for immediate use. Device type: Extraction unit Model: BRISTOL 'TF' B 250 Motor power: 0.55 kW Blsdjy R Ax Rjpfx Aqrop Airflow: 1,200 - 1,500 m³/h Connection voltage: 400V / 50Hz Extraction spigot diameter: 150 - 200 mm Application areas: Oil mist, emulsion mist, dust Year of manufacture / Serial number: 1999 / 0118703/99-1 Transport and loading can be organized throughout Europe at an additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, please visit our website.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Nestro Dust Extraction System Dust Extraction Nozzle D = 160 mm Motor power 2.2 kW Filter area approx. 11.5 m² External dimensions L x W x H approx. 1350 x 860 x 1960 mm Weight approx. 240 kg One chip collection bin / approx. 185 l Max. rated volume flow 1780 m³/h Associated negative pressure approx. 2400 PA All information is subject to change. This information was taken from a brochure. Bedpfxszhv Nne Aqrolp

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Blsdpfx Aey Agp Dsqrep Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package, robot hose package, welding fume extraction Bledpfx Aqet U Trysrjp -MIG/MAG hose package: with welding fume extraction -Length: 4.25 m -water cooled -Transport dimensions: 600/500/H130 mm -Weight: 4.8 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher type eAL 100L2B-4 2.5 kW 1420 rpm Ex protected Bsdpfot Hy T Ujx Aqrjlp -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 730/730/H730mm -Weight: 92 kg/pc.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 33461/2021/155537, overall weight: 1,150 kg, filter area: 55.2 m², suction capacity: 2,550 m³/h, Dust extraction, fume extraction by Herding. Model: COMP 1500-14/9 SB Clean surface filtration based on rigid filters. High-efficiency blast cleaning system with low compressed gas consumption. Powerful radial fan with direct drive electric motor with attached frequency converter for process- and energy-optimized operation. Bedpfeuy N S Usx Aqrolp Integrated control cabinet with processor to control all components. High-quality powder coating of the compact housing. All Herding polymer-based filter media are completely PFAS-free, have an extremely long service life and, depending on the process, achieve a service life of more than 15 years. Unit new. 11 Kw. fan with integrated frequency converter Capacity - 2550 m3/h Inlet diameter - 200 mm stock no.: 0889

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TD2002/0297, 1 Demag KBK II wall-mounted slewing crane, 250 kg load capacity / lifting capacity Bljdpfxszv H T Te Aqrep Outreach 5m, 250 kg load capacity with Demag DC chain hoist, 250 kg load capacity Weight incl. wall bracket approx. 300 kg Complete with chain hoist, cable track, trolley and small parts Slewing range 270° Item location is 75053 Gondelsheim System is completely disassembled and immediately available Shipping via freight forwarder or pickup Please inquire about shipping costs, specifying the postal code.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Fan: Blower, radial fan -Type: 2-stage -Motor: ASEA 0.4/0.1 kW 1390/690 rpm -Fan wheel: 2x Ø 200 x 80 mm -Inlet connection: Ø 160 mm -Output connection: 190 x 180 mm Bodpjy Tt Ihefx Aqrolp -Dimensions: 815/590/H400 mm -Weight: 33 kg

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan Bljdpfsy Tt Twjx Aqrjp -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This allows us to directly assign your request to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! A frequency converter with a pressure transmitter automatically adjusts the fan’s output to the actual demand. Right-hand design with connection diameter: 350 mm, including flange JET cleaning system Blodoy T Rg Ijpfx Aqrsp Motor power: 15.0 kW Filter area: 50.2 m² Nominal volume flow: 6927 m³/h Maximum volume flow: 10000 m³/h Underpressure at 20 m/s in the intake nozzle: 3620 Pascals (in a dusty state) Collection volume: 4 x 160 liters 5 meters of connection cable with a 32A CEE plug.

Condition: good (used), Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, welding fume extractors Blodex I Aknspfx Aqrsp -Manufacturer: Kemper, mobile welding fume extraction system type Eco M 3 x 400 V / 50 Hz -Drive: 0.75 kW -Max. volume flow: 1650 m³/h -Max. pressure increase: 2100 Pa -Extraction arm: Ø 150 mm x 5000 mm -Fan wheel: Ø 290 mm x 60 mm -Number: 2 welding fume extraction systems available -Price: per piece -Transport dimensions: 1200/800/H780 mm -Weight: 38 kg/pc.

Condition: refurbished (used), Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! TSWc 20.20 Dry spray wall Dimensions: 2000 x 2000 mm W x H + Fan at the top Airflow: 7,200 m³ / h Motor: 1.50 kW, explosion-proof Exhaust duct: 400 Ø mm Depth: 900 mm Double filtration: paper filter + Paintstop filter mat Clamping rail (+ EUR 150.00 net) Bledpefn Ndcsfx Aqrjp Options/additional cost for: Paintstop filter mat clamping rail: EUR 150.00 net Side guide plates with hinges: EUR 590.00 net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us.

Condition: used, Year of construction: 2016, operating hours: 16,859 h, type of input current: three-phase, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS AirTower Filter Ventilation Tower, 5,000 m³/h. Industrial filter ventilation for welding halls — designed for a variety of technological processes in production plants, primarily for metalworking. Bljdsyq Nl Nepfx Aqrep Top-mounted air intake and draft-free air discharge at floor level — directly to workstations. Layered filter ventilation principle; the unit does not require ductwork installation. Cartridge filter elements — self-cleaning via compressed air pulses during operation. Filter cleaning by differential pressure — no compressed air loss. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air without causing drafts, at a velocity below 1.2 m/s, precisely where workers breathe. Covers a broad 270-degree area. The tower operates on the layered ventilation principle, recommended by trade associations and considered the most effective form of air circulation. Year of manufacture: 2016 Operating hours: 16,859 h Specifications: - 3.9 kW EC fan - Capacity: 5,000 m³/h - Filter surface area: 80 m² - Filter cartridges: 4 pcs - Additional high-efficiency final filter (F9 filtration class) provides increased air cleaning performance and additional protection for the fan in case of main filter failure. - 100 l dust collection drawer - Very quiet operation: 75 dB(A) - Filtration efficiency: > 99.6% - Stock No.: 1109

Year of construction: 1999, condition: good (used), DISA dust extraction system, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma, laser, sandblasting, shot blasting, media blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Highly durable filter cartridges, resistant to moisture. Aluminum-coated, antistatic, operating temperature up to 135 degrees Celsius. Bsdpfxjhqd Tvj Aqrolp Fan power: 11 kW. Capacity: up to 8000 m3/h. Vacuum: up to 4300 Pa. Filtration area: 128 m2.

Condition: new, Year of construction: 2026, MDC750 Metal Dust and Chip Extractor – 400V is a high-performance extraction unit designed for metalworking stations where effective removal of contaminants such as metal chips, filings, and dust is essential. Thanks to its compact design, durable motor, and high extraction efficiency, it is a reliable solution for professional metalworking workshops, production plants, and workstations equipped with belt, bench, and disc grinders. This metal extraction system provides a clean and safe working environment while maintaining stable extraction performance. Main advantages of the machine High extraction efficiency – airflow capacity up to 1800 m³/h without a bag, ensuring effective removal of even fine metal dust and filings. Compact design – a stable, well-balanced housing allows operation in limited workshop spaces. Quick access to the collection container – simplifies regular emptying and reduces downtime. Easy filter replacement – minimizes maintenance time. Suitable for various machines – an ideal metal chip extractor and grinder dust extraction system for small and medium-sized workshops. Design and technology The MDC750 has been designed for intensive operation in industrial environments. The construction is based on a durable steel housing and an efficient filtration system that effectively separates metal dust and chips. The suction unit is powered by a 0.75 kW motor, providing appropriate airflow parameters. The 350 mm diameter impeller generates stable suction pressure, allowing efficient removal of even heavier metal particles. The machine is equipped with a 1 × 100 mm suction port, making it compatible with the most common metalworking stations. The large collection container ensures long operating periods without frequent emptying. Precision and work efficiency The applied design solutions ensure constant performance during both metal chip extraction and fine dust removal. The extraction capacity of 1520 m³/h with a bag allows efficient operation of both single and multiple workstations. The compact dimensions make the unit easy to relocate and integrate into existing workshop layouts. Bsdpfxjvugghs Aqrjlp Applications The MDC750 metal extractor is designed for professional applications, especially: bench, belt, and disc grinding stations, small and medium-sized metalworking workshops, metal component preparation and finishing stations, processes requiring effective removal of metal chips and dust. Standard equipment Basic filter Chip and metal filing collection container 100 mm suction port Set of mounting components and consumable elements Technical specifications Motor power 0.75 kW Voltage 400V / 50 Hz Suction ports 1 × 100 mm Extraction capacity without bag 1800 m³/h Extraction capacity with bag 1520 m³/h Impeller diameter 350 mm Dimensions 870 × 560 × 1170 mm Weight 31 kg

Year of construction: 2006, condition: good (used), RITTER brand welding fume extraction, dust extraction, and self-cleaning filter, pneumatic and vacuum-operated. Suitable for welding, grinding, sandblasting, and all types of dry dust. Filter cartridges in good condition. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. Designed for continuous operation. Fan in a sound-absorbing enclosure, 2.2 kW. Capacity: 1200 m3/h. Bljdohyg Ivepfx Aqrsp Filtration area: 10 m2. Additionally equipped with an automatic spark detection and extinguishing system. The spread of sparks is usually caused by the operation of production machinery or material contaminants. The result of such a situation is downtime in the production process and losses for the company, and in some cases, a serious threat to human life. Therefore, in order to eliminate similar hazards, pneumatic and mechanical conveying devices should be monitored for the presence of sparks and properly protected by using spark detection and extinguishing systems.

Condition: good (used), Funnel, extraction hood, filling funnel, drip tray -Extraction hood: can also be used as a filling funnel for e.g. conveyor systems -Design: sturdy steel frame, stainless steel funnel sheet -Opening: Ø 200 mm -Dimensions: see photos -Transport dimensions: 2020/910/H300 mm -Weight: 96 kg Bljdpfjik Adgex Aqrjp

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DN 160 -Motor: Dietz 1.0 kW 2850 rpm Bodpst Rbhujfx Aqrslp -Volume flow: 30 m³/min / 1800 m³/h -Connection: inlet Ø 140 mm -Connection: Output 135 x 135 mm -Dimensions: 470/300/H365 mm -Weight: 17.7 kg

Condition: good (used), Dust extraction unit, extraction system, self-cleaning vacuum filter, absorber, dust collector for extracting graphite, metal, mineral, hard fiber, flammable, hazardous, and toxic dust, and for the effective collection of process dust, blasting dust, sanding dust, grinding dust, polishing dust, and all types of dry dust. The extraction unit has explosion hazard classes ST1 and ST2. The vacuum fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Filter cartridge – multi-pocket design. 11 kW fan in a sound-absorbing housing. Capacity: 3500 m3/h. Vacuum: 7000 Pa. Filtration area: 24 m2. Automatic filter cleaning with an electric motor. Bodog Rhfbspfx Aqrjlp The extraction unit was used during graphite processing.

Condition: ready for operation (used), Year of construction: 2017, Dear customers, To ensure a quick and reliable response to your inquiry, we kindly ask you to contact us preferably by email. This way, we can immediately assign your request to the appropriate contact person, collect all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! Blodjgny Ryepfx Aqrep Technical data will follow.

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos Bljdpfx Aqsk Aubqjrep -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower Bedpfx Aedz Umrjqrelp -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm Bodjb Ilw Tjpfx Aqrelp -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow: approx. 6000 m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm -Impeller: Ø 670 mm -Quantity: 1 available Bodpfxjb Ilxdo Aqrjlp -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg