Used Extruded for sale (400)

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request. Iodpfx Adoi Dtbijwetb

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator Ijdpfx Aoi Dtb Aodwstb 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel Itedoi Dtb Uspfx Adwsb OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Iedpfx Aded Sg Hrjwetb Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW Isdpjh Eyd Ajfx Adwotb 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 2017, condition: used, screw size 30 mm Capacity 1000 kg/h Drive 240 kW L/D Iodsb Niqhepfx Adwjtb

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : Ijdpfx Adod Sg I Iswotb diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, Itedpfegbffvox Adwjb > find our most-recent stock-list online on our homepage.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome. Itjdpfxoh Eyd Ro Adwjb

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Itsdpfx Adeiyyf Ijwsb Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: like new (used), Rondo line for thin pastry, was set up to produce thin pastry to manufacture samosas but can be used for any fine pastry manufacture. Starts with elevated conveyor, 6 roll dough extruder 650mm wide, various 700mm wide conveyors with guillotines and dusters. Was set up to cut the pastry into 75 x 173mm 8 across, 90 x 213mm 7 across and 110 x 254mm 5 across. We would need to check first if all the sizes are here, not confirmed, just read from the order form. Lins is approx 22m long. All belts have perished, this has been in safe storage for many years as it could not be sold to competitors in the UK. Itjdpfxeh Rwlfe Adwsb

Condition: used, Year of construction: 1971, functionality: fully functional, 4-Roll Rubber Calender 1. Manufacturer • Manufacturer: Comerio Ercole 2. Machine Identification • Machine type: 4-Roll Rubber Calender • Roll dimensions: 18" × 54" – Roll diameter: 18 inches – Roll length: 54 inches 3. Year of Manufacture and Modernization • Original year of manufacture: 1971 • Modernization history: Machine regularly upgraded until 2018 4. Intended Use • Calendering of rubber compounds • Designed for continuous operation in tire and rubber production lines 5. Control and Automation • Upgraded control system implemented in 2012 • MMI system installed in 2001 • Control panel equipped with Beckhoff components 6. Mechanical and Process Upgrades Mechanical Upgrades • Installation of new calendar rolls (2018) • Optimization of the spool winding unit (2014) Ijdsx Iug Uepfx Adwstb • Overhaul of cooling lines (2013) Process Upgrades • Gauge measurement system installed (2012) • SQ1 material width measuring system installed (2009) • Cassette winding systems with dedicated control cabinets installed (2009) 7. Drive System • Large industrial electric motor by ABB • Drive system coupled with Comerio Ercole gearbox 8. Plant Configuration • Integrated adjustment for feed extruder (installed 2012) • Cooling section included in the system • Multiple winding stations integrated into the calender line

Condition: used, Year of construction: 1995, functionality: fully functional, 1. Pearl Winder – Gadsden • Enclosed winding machines with yellow safety covers • Multiple rotating winding discs and wire guides • Integrated control panels with push-buttons, indicator lights, and emergency-stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feed paths and guiding elements 2. Pearl Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Auxiliary equipment including heating/control units and material handling components • Safety devices integrated into the system 3. Carousel and Loader Robots • Articulated industrial robot arm by ABB (orange) Itsdpfx Adsx Itz Rjwob • Rotary carousel stations with multiple indexed fixtures • Safety fences enclosing the robot working areas • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels arranged in series • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Condition: used, Year of construction: 2001, functionality: fully functional, 1. Bead Winder – Gadsden • Enclosed winding machines with yellow safety covers • Multiple rotating winding discs and wire guides • Integrated control panels with push buttons, indicator lights, and emergency stop switches • Mechanical winding stations mounted on heavy steel frames • Visible wire feeding pathways and guiding elements 2. Bead Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Auxiliary equipment including heating/control units and material conveying components • Safety devices integrated into the system 3. Carousel and Loader Robots • Articulated industrial robot arm from ABB (orange) • Rotary carousel stations with multiple indexed holders • Safety fences enclosing robot work areas • Integrated control panels next to the robot cell 4. Coil Winding Equipment • Multiple wire pay-off and take-up reels aligned in series Itsdpfjx Itzqjx Adwob • Tension and guide rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Year of construction: 2021, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have three units in stock. Price is for one unit only !!! External Dimensions (W x D x H) 620 x 730 x 905 mm Internal Dimensions (W x D x H) 490 x 523 x 665 mm Volume 165 liters Net Weight 80 kg Temperature Control Range & Fluctuation AT +5 ~ +50, ±0.1 °C Temperature Uniformity ±0.25 °C CO2 Control Range & Fluctuation 0 ~ 20, ±0.15 % O2 Control Range & Fluctuation - Humidity Level & Fluctuation 95, ±5 %RH Temperature Sensor Thermistor Sterilisation Method H2O2 Decontamination (Optional) CO2 Sensor Dual IR O2 Sensor - Display LCD Touch Screen Isdoxbilpjpfx Adwetb Exterior Material Painted Steel (rear cover not painted) Interior Material Stainless Steel Copper-Enriched Alloy Insulation Material Extruded polystyrene Heating Method Direct Heat & Air Jacket System Outer Doors 1 Outer Door Lock Optional Field Reversible Door Included Inner Doors 1 gastight - made of tempered glass Shelves 4 x Stainless Steel Copper-enriched Alloy Shelf Dimensions (W x D x H) 470 x 450 x 12 mm Max. Load Per Shelf 7 kg Max. Shelf Capacity 10 Access Port 1 Access Port Position Rear Upper Left Access Port Diameter 30 Power Failure R Out of Temperature Setting V-B-R High Temperature V-B-R Out of CO2 Setting V-B-R Out of O2 Setting - Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level 29 dB

Condition: used, Year of construction: 2005, functionality: fully functional, (1) Bead apexing line (1), including AFC, conveyor belt, drum applicator, grinding conveyor, extruder Ijdpox Itmyjfx Adwjtb

Condition: used, Year of construction: 1996, functionality: fully functional, Triple extrusion line Technical details: Documented notes: The line has been modernized several times since its commissioning. Component arrangement according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame • Triplex extruder configuration • Control system with Beckhoff interface • Operator screens for displaying extrusion parameters • Winder units designated as “Wickler” • Emergency stop button available Itsdpfxex Itgaj Adwjb • Industrial control cabinets installed

Condition: used, Year of construction: 1969, functionality: fully functional, Banbury Mixer No. 3 with Peripheral Equipment Documented Modifications/Upgrades: Year Modification / Upgrade 1962 Gearbox upgrade, Mixer III 1973 Weighing and feeding system for Mixer III 1981 Exhaust system for Mixer III 1985 Batch-off machine, Mixer 3 1985 Temperature control unit, Mixer 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Mixer III 2007 Hose scale for Mixer No. 3 2008 Vibration measurement system, Mixer III Itedpox Itfpsfx Adwob 2008 Column slewing crane for bale handling, Mixer III 2009 Vacuum lifting system, Kneader III 2010 CMS system for Mixer III 2013 Slab strip cutter for Kneader III 2014 Plate feeding system for Kneader III 2014 Overhead conveyor, Kneader III 2014 2 × floor scales for Kneader III 2014 New control systems for Kneader III 2014 Cooling coils MUAFAN 1+2 – cooling line mill Mixer 2+3 2015 Monitoring system (Mixer I–III) for CMS-Kneader III 2017 Mixer body, Kneader III (replacement) 2023 Rubber Kneader III KSBI-L270 Control System: New control systems 2014, CMS system 2010, DC drive/Automax, PLC batch-off & conveyor, documented AC drives Maintenance/Condition: Regular modernizations and upgrades documented 1962–2023 Accessories/Options: Batch-off machine, plate feeding unit, installation conveyor, strip cutting device, floor scales, bale handling crane, vacuum lifting system, carbon black silos and weighing system, extruder, roll die, roll head with conveyor, cooling systems (dip tank, cooling line, discharge), control systems (DC drive, AC drive, Automax, PLC)

Condition: used, Year of construction: 2016, functionality: fully functional, mileage: 17,500 km, 1. General Description Machine Name: QUADRUPLEX EXTRUDER No. 1 REF No.: FU-FPs 647 2. Functional Scope and System Components The overview presents the complete production line in conjunction with the quadruplex extruder, including material conveying systems, belt guidance, belt scanning, acceleration zones, cross-cutting, and cassette winding stations. 2.1 Main Assemblies - Extruder head - Multiple "swings" (pivoting arms), numbered 0 to 13 - Strip scanning systems ("Scan 1", "Tri Scan", Strip detection 1–4) - Cross-cutting unit ("cross-cutter") - Cutting machine - "Cutting table" - Conveyor belts labeled BELT 1, BELT 2, BELT 3 Winding Section: - Cassette winders 1–4 - Winding stations labeled "Winder 1–4" Note: Winders 1 and 2 marked "out of service" - Cooling water tank - Cooler - Electrical peripheral equipment, TCU units (temperature control units), control cabinets ("control cabinet", "ctrl.cab.") - Steel platform structures ("platform", cooling section platform) 3. Operating Parameters 3.1 Production Speed 0–30 m/min (specified production speed range) Iodpfx Adsx Irz Nswotb 3.2 Acceleration Section (Acceleration Speed Q1) From the provided calculations: - Basic production speed: 30 m/min = 0.5 m/s - Rocker cycle time: 4 sec - Belt shifting cycle time: 4 sec - Gap length: 2 m - Acceleration length: 8 m - Acceleration time: 16 sec - Speed difference: 2 m/s = 7.5 m/min - Resulting acceleration speed: 37.5 m/min 4. Strip (Material) Specifications 4.1 Strip Dimensions - Strip width: 20 mm – 220 mm - Strip thickness: 1.5 mm – 16 mm - Strip temperature: 10 °C – 45 °C - Strip weight: 0.02 kg/m – 2 kg/m 4.2 Strip Lengths Along the Line (Exact lengths between defined mechanical and sensor points) - Extruder head → Swing 0: 3,997 mm - Swing 0 → Swing 1: 10,279 mm - Swing 1 → Strip detection 1: 14,400 mm - Strip detection 1 → Strip detection 2: 39,159 mm - Strip detection 2 → Strip detection 3: 1,812 mm - Strip detection 3 → Strip detection 4: 27,702 mm - Strip detection 4 → Cross-cutter: 22,032 mm - Cross-cutter → Transfer belt pos. 10: 13,956 mm Other splitting and merging sections: - From splitting point pos. 10.1 → Rocker pos. 5: 17,545 mm - From splitting point pos. 10.2 → Rocker pos. 5: 17,542 mm - From merging point pos. 10 → Belt splitting point pos. 1–4: 17,827 mm Final travel lengths to winding stations: Belt position To cassette station – belt end Position 1: 6,050 mm Position 2: 9,072 mm Position 3: 12,376 mm Position 4: 15,393 mm To Spool Core (inner core) Position 1: 6,844 mm Position 2: 10,004 mm Position 3: 13,346 mm Position 4: 16,325 mm 5. Installed and Referenced Equipment The document lists an extensive chain of equipment references from which the quadrup­lex extruder line is "derived" or which it "includes", for example: - FU-FPs 648 – Cassette winders - FU-FPs 649 – Conveyor modifications - FU-FPs 650 – Extruder modifications - Older equipment from Berstorff (1995–1996) - Triplex winding equipment - Steel structural foundations (2005, 2019) - Conveyor control desks (Erhardt + Leimer, 2019) - Axelent safety fence - Various construction and civil engineering modifications (2018–2019)

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system Isdpfxox I S N Hs Adwstb • Pipe diameter 14, 16, 18, 20 mm • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. • Axle height 1000 mm

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit Itedpfx Adjx I I Ncswjb (1) Sawing unit Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 Itsdpfox I I Iljx Adweb (1) Tilting table Technical details: Length approx. 6 m, weight approx. 300 kg

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit (1) Saw unit Technical details: Itjdex I Itbopfx Adwjb Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: used, Production line consisting of: Isdpfx Ajx I Inxjdwjtb (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Isdpfex I Ig Uex Adwotb Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm