Used Falling Film Evaporators for sale (1,974)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) Rcedsygud Aepfx Abpof - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: Rcsdpfexrb Hmjx Abpjf • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-260018, FICEP Flex FRC 1201 Notching Machine The Ficep FRC 1201 notching machine is part of the modern Ficep Flex series of notching machines. This modern CNC-controlled notching machine is designed for the rapid thermal cutting and notching of H, U, L, flat, and square tubes. The steel profile is positioned in the machine at the cutting location via a roller conveyor using a pulling tong carriage. A robotic arm equipped with the cutting units (oxy-fuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 profile notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD plasma power source, suitable for material thicknesses up to 32 mm, is used. Thicker materials or phase cuts larger than 32 mm are cut using the oxy-fuel cutting unit. Conveyor System: On the infeed side, in front of the Ficep Flex FRC notching system, there is a chain-driven cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a sturdy roller conveyor using a clamp-type measuring cart. The system is designed for 12-meter-long profiles and therefore features 12-meter-long roller conveyors on both the inlet and outlet sides, each with a roller track width of 1,300 mm. To remove the finished components on the outlet side, four chain-driven cross conveyors, each 6,450 mm long, are located downstream of the notching station. Mitrol CNC Control and Pegaso Software: Rsdpfx Aszmbgvobpscf The system is controlled by a modern CNC control system from Mitrol. This reliable CNC control system, manufactured by Ficep’s in-house supplier Mitrol, features Pegaso software, including remote maintenance capabilities and a data transfer interface. Torit DCE Filter Unit The filter unit for dust extraction is a Donaldson Torit DCE. Safety: via fence and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of cutting unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching machine is in very good condition.

Condition: excellent (used), EPS CRUSHER / SHREDDER / GRINDER – GRINDER N. 1 For sale: a professional, high-efficiency EPS (expanded polystyrene) shredder/grinder, designed for continuous operation within a technological production line. Unlike standalone machines that require manual feeding or separate conveyor loading, this unit is specifically engineered for installation directly underneath an EPS cutting line. It automatically collects, crushes, and reduces the volume of both side and bottom waste material as it falls onto the conveyor belt during the cutting process. Rcjdpezc Hnljfx Abpef PRICE: Original Price: 6,500 EUR New Price: 5,900 EUR Technical Specifications: External Dimensions (L x W x H): 191 x 120 x 64cm Inlet Dimensions: 148 x 38cm Drive System: Heavy-duty 7.5 kW gear motor (motoreducer) Shaft Configuration: Dual-shaft drive via heavy-duty gears (both shafts are actively driven) Tags: EPS shredder, polystyrene crusher, EPS grinder, recycling equipment, volume reducer, styrofoam shredder, compactor, waste processor.

Condition: excellent (used), Year of construction: 2014, Ref:11125 . Fotoba XLD 170 + Fotoba REW 104 Slitter Rewinder. 2013 Fotoba XLD 170 High speed cutter. Primarily used for digitally printed wallpaper up to a maximum thickness of 0.8 mm. Including polycarbonate, photo paper, vinyl, self adhesive vinyl, PVC, film, Duratrans, TDF, canvas, laminated or encapsulated prints, etc. Using cut marks generated by the RIP and with 'True Image Edge Tracking', the cutting is executed with precise accuracy. The sensor automatically follows the prints. Extremely easy roll loading. 'Digitrim' function enhances the versatility of the XLD 170. Features & specification: Self squaring to the edge of the image 'X' Automatic tracking of the image edge 'Y' Memory channels to store different cut marks. All mechanisms controlled by stepper motors. Self sharpening knife system. Vertical slicers; single 8 mm double or adjustable double. Adjustable cutting lengths & quantities - accuracy +/- 1 mm (0.039") Max. linear speed: 18m / 50ft. Cutting width, Max: 170 cm (67") Min: 28 cm (11") Rcsdpfxozmx Nue Abpjf Max. load 200kg (440 lbs), max. diameter 60 cm. 2014 Fotoba REW 104 Automatic in-line coreless rewinder. Made for non-stop industrial production. Can rewind two rolls simultaneously up to 20m long. Can wind up tiles of the same job for better logistic. Maximum roll diameter: 90 mm Maximum rolled weight: 8 kg

Condition: used, mileage: 12,80,282 km, power: 324 kW (440.52 HP), first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, loading space volume: 39 m³, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,170 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Vehicle No. for customer inquiries: 209 ----Body: * Company: Kiesling * Tail lift: BÄR 2,000 kg * Side anchor rails * Roof mounting rails * Floor mounting rails * 2x Cool Slide partition Refrigeration unit: * Mitsubishi TU100SA MULTI * 2-chamber system * 2 evaporators * Standby and on-the-move cooling * Diesel + electric * Fresh produce and frozen food transport * Cargo area dimensions: L: 7,350 mm, W: 2,470 mm, H: 2,170 mm * Payload: 13,030 kg ----Additional features: * Automatic climate control * Retarder * Navigation system * 3rd steering axle and lift axle * Auxiliary air conditioning * Auxiliary heater * Cruise control * Trailer coupling * Parking assist with rear view camera ----Special equipment: * Base color: red * Upholstery: fabric * ABS, ASR, ESP * On-board computer Rjdpszmk A Hofx Abpscf * Differential lock * Ready for operation * Driver's sleeper berth * Particle filter * AdBlue tank * Hands-free system with Bluetooth * Multifunction steering wheel * Fog lights * Radio CD / USB / AUX * Sleeper cabin * Suspension seat * Central locking * Electric windows * Electric, heated side mirrors * Electric immobilizer ----Technical data: * HSN/TSN: 1516/000 * Suspension: Leaf-air-air/lift/steering * Automatic transmission * Emissions class: EURO6 * Environmental badge: 4 (Green) * Wheelbase: 4,500 mm * Cargo area dimensions: L: 7,350 mm, W: 2,470 mm, H: 2,170 mm * Payload: 13,030 kg * Tire size: 315/70 R22.5 * Tire tread: approx. 50% - 20% - 20% ----German vehicle! * €13,900 net plus VAT * In the event of export to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle & does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute guaranteed characteristics. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typing errors, errors and prior sale. * Dear customer, please understand that, due to the age and mileage, we prefer to sell the vehicle to commercial businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-Mail: * Internal number: 209

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Rcodszp H R Eepfx Abpof Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: used, Year of construction: 2020, Format: 0x0 Equipment: Hugo Beck Flexo X Intermittent Film Packaging Machine Product Feed:Manual as a standalone machine / Automatic in-line (flexible configuration) Control System:Touchscreen with temperature memory and reproducible format settings Rsdpozpgh Djfx Abpocf Film Processing:PE, PO, bio-films, center-folded film, and flat film Sealing System:Side sealing + intermittent cross-sealing Operation:Intermittent Kallfass Compact 650 D Shrink Tunnel Type:High-performance energy-saving shrink tunnel Heating System:Patented ring nozzle heating system in double design Blower:Frequency-controlled, Zolltornado-style Zoll hot air flow for uniform shrinking Transport:Maintenance-free plastic modular belt, continuously adjustable speed Film Compatibility:All polyolefin films Safety:Safety equipment according to EC directive EN 60204

Year of construction: 2019, condition: good (used), Pallet wrapper, – used –: Price ex works: €1,950 (net), including loading! Manufacturer: Robopac Model: Ecoplat Plus Base Type: Rotary Table Serial number: 30188020 Year of manufacture: 2019 Turntable diameter: approx. Weight: approx. 345 kg 230 V, 50 Hz, 8.5 A, 1.2 kW Manufacturer data: Length (mm) 2490 mm Width (mm) 1640 mm Height (mm) 2610 mm Film width max. (mm) 500 mm Film thickness min. (µm) 17 µm Film thickness max. (µm) 35 µm Film core diameter max. Ø (mm) 76 Ø mm Film roll diameter Ø (mm) 300 Ø mm Film stretching: Manual Film pre-stretch min. (%) 0 % Film pre-stretch max. (%) 0 % Film roll weight (kg) 20 kg Film carriage type FRD Film carriage speed max. (m/min) 4 m/min Processable product length max. (mm) 1200 mm Processable product width max. (mm) 800 mm Processable product height min. (mm) 400 mm Processable product height max. (mm) 2200 mm Pallet processing capacity (pallets/h) 30 pallets/hr Rcedpfezpf Rdex Abpof Rotation speed min. (rpm) 4 rpm Rotation speed max. (rpm) 10 rpm Condition: good Available: immediately Location: Erfurt area, later in Frankenberg warehouse

Condition: excellent (used), Year of construction: 1991, Bergmann SB 600-58 Vertical Baler for Sale Manufacturer: Bergmann Model: SB 600-58 Year of manufacture: 1991 Machine weight: 810 kg Rcodszntxaspfx Abpef High-quality, German-made Bergmann vertical baler, designed for compacting cardboard, plastic film (LDPE), PET bottles, paper, and other recyclable materials. The machine comes from a recycling facility and features a robust, industrial-grade construction, making it suitable for waste management companies, recycling plants, warehouses, logistics centers, and industrial operations. Specifications Manufacturer: Bergmann Model: SB 600-58 Year: 1991 Machine weight: 810 kg Heavy-duty steel construction Suitable for cardboard, plastic film, paper, PET, and other recyclable materials Condition Used industrial machine. Sold in the condition shown in the photos. Inspection is welcome by appointment.

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Rcjdpew Az E Tofx Abpsf

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Redpfx Aoxlcp Njbpscf Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, mileage: 5,23,638 km, first registration: 12/2015, maximum load weight: 12,865 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, color: white, driver cabin: day cab, Year of construction: 2015, Equipment: ABS, IVECO STRALIS AD260S36Y\PS E6 HI STREET – Chassis WJME2NPH60C324990 Year 09.12.2015 - EURO 6 ENGINE: CURSOR 9 – 360 HP – 8710 cc - KM 523,638 Transmission: Eurotronic 12-speed 12as 1930 Td \ Automatic – Sequential - Expansion Module Body: Color WHITE IC194 Tires: Dim. 315\80r225 STRUCTURE: Wheelbase 6050 MM - Gross Vehicle Weight: 260 Q.li - Payload: 128.65 Q.li - Short Cab \ Low Roof – Active Day New Technology – Hi Street - Air Suspension (Rear) - Third Steerable and Liftable Axle Rcedpfx Aezrmmxjbpof TECHNICAL EQUIPMENT (TRUCK): Rear Differential Lock, Immobilizer, Air Conditioning, Engine Brake with Retarder Function, Power Steering, Electronic Speed Limiter, ABS (Electronic Brake System + Brake Assist System); AEBS (ABS – ASR) + BAS; ESP, Towing Version, Lane Departure Warning System LDWS EU Standard, Adaptive Cruise Control, Hill Holder, Short Cab \ Low Roof – Active Day New Technology – Hi Street, Roof Hatch, Electric Windows Central Locking, Heated Urea Tank 80 Lt; Aluminum Fuel Tank 390 Lt, LED Daytime Running Lights, Pneumatic Driver Seat, Electric and Heated Rearview Mirrors EQUIPMENT: ISOTHERMAL VAN - Brand: CHEREAU - Model: INOGAM P1505 - Serial Number: 99821 Internal useful dimensions 9.80 * 2.46 H 2.45; 01 side door on the right side; 02 rear doors; Equipped internally for dual-temperature operation with liftable and sliding partitions to create a single or different temperature loading zone AUTONOMOUS DIESEL REFRIGERATION UNIT Brand: CARRIER - Model: SUPRA 1250 MT - 02 internal evaporators in the cell for dual-temperature operation RETRACTABLE TAILGATE Brand: DHOLLANDIA - Serial Number: 15070849 – Lifting capacity 20 Q.li ATP Certificate of Category FRC Valid until 09.2027

Condition: used, Year of construction: 2012, lifting height: 3,660 mm, fuel type: electric, Weights Empty weight: 780 kg Functional Lifting capacity: 227 kg Working height: 566 cm Rodjzrk N Dopfx Abpecf Dimensions of cargo space: 138 x 77 x 179 cm CE mark: yes Condition General condition: poor Technical condition: poor Visual appearance: poor Other information Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJ12 Year of build: 2012 Condition: Used Data: Max. working height: 5,66 m Platform height: 3,66 m Lifting capacity: 227 kg Platform dimensions LxW: 0,98 x 0,67 m Transport dimensions LxWxH: 1,38 x 0,77 x 1,79 m Tyres: Weiße Bereifung Movable up to working height: 5,66 m Ground clearance: 0,05 m Drive type: Batterie Empty weight: 780 kg Special features: The platform can be extended 42 cm outward, lightweight, with 2 anchor points for fall protection systems (PPE). Information: not working, tower chain broken, Location: 04435 Schkeuditz (Leipzig) immediately available

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray. Rodpfxsy Tuxzo Abpocf

Condition: good (used), Strautmann AutoLoadBaler baling press Rcodpjv Aktnefx Abpjf Suitable for baling: Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Pressing force kN: 530 Year of manufacture: 2017-2018

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Single-Shaft Shredder WT40100 – 45 kW – Hydraulic Pusher – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling lines. We offer a new industrial single-shaft shredder, the 3E Machinery WT40100, equipped with a 45 kW main motor and a hydraulic pusher system. The WT series is designed for the pre-shredding of large and bulky materials that cannot be fed directly into granulators due to their size and structure. The hydraulic pusher automatically pushes the material towards the rotor, ensuring efficient and stable shredding. TECHNICAL SPECIFICATIONS: Model: WT40100 Type: Single-shaft shredder with hydraulic pusher Main motor power: 45 kW Hydraulic motor power: 2.2 kW Rotor length: 1,000 mm Rotor diameter: 390 mm Rotor speed: 74 rpm Rotor knives: 58 pcs. Fixed knives: 2/4 pcs. Standard screen perforation: 40 mm Cutting chamber: 1,410 × 1,000 mm Machine dimensions (L × W × H): 2,825 × 2,004 × 1,875 mm Discharge height: 500 mm Weight: approx. 4,000 kg Control system: Siemens components / Siemens LOGO PLC Condition: Brand new Technical parameters according to the WT series specification published by GrabTrade. APPLICATIONS: Redpfxsznbhis Abpecf The WT40100 is suitable for shredding a wide range of materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, PVC, plastic pipes and profiles, film waste, crates, boxes, and containers, wood and pallets, paper and cardboard, textile waste, carpets and Big-Bags, cable waste, industrial and bulky waste. The hydraulic pusher system continuously pushes the material towards the cutting rotor, providing effective processing even with bulky or irregularly shaped waste. The shredder is equipped with a robust low-speed rotor, an external bearing system, and overload protection. The machine can also be integrated with a granulator, conveyor, screw conveyor, or other equipment to create a complete shredding and recycling line. 3E Machinery specifically demonstrates the WT40100 operating together with a PC4280 granulator as a complete shredding system. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and complete recycling lines: GrabTrade – shredding and recycling machines.

Year of construction: 2025, condition: new, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma TSA 680 S Automatically operating machine for sealing pre-formed trays made of various materials (polypropylene, polyethylene, PVC, polystyrene, PET, CPET, etc.) using heat-sealable films. These films are compatible with the trays and create packaging with or without a protective atmosphere – depending on customer requirements. Technical Specifications Model: TSA 680 S Condition: Exhibition machine Year of manufacture: 2025 Performance: Up to 54 packages/minute (depending on film and product characteristics) with MAP. Packaging type: Tray sealer Machine Equipment Length of infeed conveyor: Free infeed section 3000 mm Equipment Features Rcsdpfszmdrhex Abpof ✅ 3-meter belt infeed ✅ RFID access cards ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ MAP Cut Inside tool for trays 227 x 175 or 190 x 144 ❌ Double film roll holder ✅ Vacuum / Gas system (O2 >21% possible) ✅ Vacuum pump Busch 300 m3/h ✅ Menu separator for liquids ✅ Spare parts packages for machine & tool included ✅ Tool changing cart ✅ Central lubrication for lifting system ✅ Synchronization signals for upstream and downstream equipment Documentation & Operation Language (Documentation & HMI): German (other languages available on request) Dimensions & Weight External dimensions (L × W × H): 6,020 × 2,070 × 1,110 mm Shipping weight: 2600 kg (including transport packaging)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Rcsdpfx Asw H Aw Sjbpsf Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Rodpoztmulefx Abpscf Drive power 30 kw

Condition: new, Year of construction: 2024, functionality: fully functional, Ideal for separating ferrous impurities from granulates such as plastics and dry, free-flowing powders such as flour and sugar in free-fall conveying systems. We would be happy to carry out a test with your material to ensure that our product optimally meets your requirements. Rsdpfx Aouc S Ihobpjcf If you have any further questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Cyclone Dust Separator with Waste Container and Vacuum Hose Included The cyclone dust separator with waste container and vacuum hose is a practical solution designed for efficient dust extraction in woodworking workshops and industrial environments. The separator allows two machines to be connected simultaneously, improving the efficiency and convenience of the dust collection system. The dust separation process is based on centrifugal force. Extracted dust particles are separated from the airflow and collected in containers located beneath the cyclone. The separator efficiency reaches 90–95%, significantly reducing the amount of dust reaching the filtration system. Device description Metal separator housing, Metal waste collection container, Mobile base, Ergonomic handle, Viewing window for checking the container fill level, Rcsdpfxjvu Uugo Abpjf Quick-release clamps for easy bag installation. The cyclone must be connected to a fan or dust extraction system. Operating principle In the cyclone separator, contaminated air enters the cylindrical chamber and begins to rotate. Due to centrifugal force, heavier particles suspended in the airflow are pushed toward the outer walls of the chamber. As they lose speed and kinetic energy through contact with the cyclone walls, they fall downward under the influence of gravity and collect in the container. The lightest sawdust particles are then captured by the filter cartridge and directed into the collection bag, while cleaned air exits through the sides of the filter. Technical specifications Parameter Specification Tank capacity 118 L Bag dimensions Ø500 x 850 mm Inlet diameter 125 mm Inlet adapter diameters 1 x Ø125 / 2 x Ø100 mm Outlet diameter 125 mm Outlet adapter diameter Ø125 mm / Ø100 mm Weight (net/gross) 24 / 26.5 kg Overall dimensions 785 x 508 x 1545 mm Note: The fan, dust extractor, and Ø100 mm hose are not included in the set.

Condition: new, machine/vehicle number: Baureihe GSC / Neumaschine, The compact granulators of the GSC series are fully sound-insulated granulators and therefore operate with particularly low noise levels. The integrated soundproofing, thanks to its sophisticated design, ensures optimal accessibility to the granulator itself as well as for knife and screen changes. The noise reduction is based on the use of state-of-the-art soundproofing materials. The housings, manufactured from a robust steel/welded construction, combined with the V-cut rotors (except for the GSC 300/300), ensure a long service life and offer universal applicability. The tangential housing geometry allows the rotor to reliably feed and granulate even bulky input materials. All machines of the GSC series consistently deliver high-quality regrind, regardless of whether the input material consists of injection or blow molding waste, profiles, sheets, or films. The GSC series models are cost-effective, highly reliable, easy to clean, and built for long service life. Integrated sound insulation: The integrated sound insulation guarantees a comfortable working environment with low noise emissions. The optimized design ensures ideal accessibility to the machine. Mobile compact design: The integrated sound insulation allows the granulators to remain compact and mobile. The machines can be transported to any desired work site using a pallet truck or forklift. ZERMA offers a wide range of options such as extraction systems, conveyor belts, metal detectors, and fine material separators. Rcsdpfx Aoyr I E Dsbpjf

Condition: excellent (used), Year of construction: 1990, Manufacture: W&H Rcjdpfx Abozlalbepof Type: Polyrex 85 BV Type of bag: Glue Patch handle (DKT) Max roll diameter: 1200 mm Working width:850mm Unwind width: 1400 mm Bag width: 250-650 mm Film thickness: 35-100 micron Mechanical speed: 80m/min Cycles: 120 cycles/minute Machine in very good condition and can be seen in working production.

Condition: new, Year of construction: 2026, KDP350TOP Cabinet Sandblasting Machine The KDP350TOP cabinet sandblasting machine is an advanced industrial device designed for cleaning and preparing metal surfaces. Thanks to its spacious 350-liter working chamber and top-opening design, this model provides excellent operating comfort and allows sandblasting of large components. The integrated DC15 cyclone dust extraction system ensures a clean and dust-free working environment. This reliable sandblasting cabinet is ideal for processing aluminium and steel wheels, machine components, engine parts, and various steel or aluminium elements. Main Advantages of the KDP350TOP Sandblaster Large working chamber – 350 liters of capacity for processing large workpieces. Top opening chamber design – simplifies loading and unloading of components. DC15 cyclone dust extraction system – effectively removes dust generated during operation. Dust-free operation – front doors with perimeter seals and extraction connections (Ø63 and Ø90 mm) ensure a clean working environment. Sandblasting gun – equipped with 8 ceramic nozzles for precise surface treatment. Internal lighting – 12 V fluorescent lamp powered by 230 V improves visibility during operation. Integrated protective gloves – wear-resistant gloves built into the cabinet provide safety and ergonomic operation. Replaceable protective films for the viewing window – ensure clear and uninterrupted visibility. High compatibility with abrasives – suitable for quartz sand, glass beads, emery, and plastic abrasives. Rodpfx Aom Ncb Eebpscf Applications The KDP350TOP cabinet sandblaster is suitable wherever precise surface treatment is required. It is ideal as: a sandblaster for aluminium and steel wheels up to 20 inches, a preparation cabinet before painting or welding processes, a device for removing rust, paint, coatings, and technological deposits, a tool for refurbishing automotive, engine, and industrial components. Dust Extraction System – DC15 Cyclone Extractor The set includes the DC15 cyclone dust extraction system, which works together with the extraction ports to effectively remove contaminants generated during sandblasting. Thanks to the cyclone filtration system, the filter maintains high efficiency for a long time, while the working area remains clean. This solution significantly improves operator comfort and safety, especially during long-term operation of the cabinet. Standard Equipment DC15 cyclone dust extractor with filter Connecting hose 12 V fluorescent lamp (230 V power supply) with switch 2 rubber gloves integrated into the cabinet Sandblasting gun with 8 ceramic nozzles 4 protective films for the viewing window Front door with rubber perimeter seals 2 dust extraction ports (Ø63 mm and Ø90 mm) User manual in Polish Technical Specifications – KDP350TOP Sandblasting Cabinet Parameter Specification Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Dust extraction connection Ø63 mm and Ø90 mm Internal dimensions (W × D × H) 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg