Used Floating Cross Table for sale (20,483)

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table -Controlled cross table: was used as a soldering station Bdodpfxshtn Sbs Abteg -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Bjdpfxeu R Syps Abtsdg - new exhibition machine -

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bdsdpfxezp H R Es Abteg Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,140 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 7,000 rpm, total length: 1,700 mm, total width: 1,130 mm, total height: 1,100 mm, overall weight: 400 kg, Equipment: CE marking, documentation/manual, saw blade guard, Professional panel saw SICAR SEGA 300, manufactured in 2022. The machine is equipped with a 1600 mm long aluminum panel carriage, a scoring saw, and a tilting saw unit. The robust construction, based on a cast iron table and a heavy-duty saw unit, ensures stable operation and high cutting precision. The saw is designed for processing solid wood, furniture boards, MDF, plywood, and other wood-based materials. TECHNICAL DATA: - Manufacturer: SICAR / MA.CO.2L - Model: SEGA 300 - Year of manufacture: 2022 - Panel carriage length: 1600 mm - Carriage dimensions: 1600 × 315 mm - Main saw blade diameter: 300 mm - Main saw blade arbor diameter: 30 mm - Scoring saw diameter: 90 mm - Scoring saw arbor diameter: 22 mm - Main saw blade speed: 4500 rpm - Scoring saw speed: 7000 rpm - Maximum cutting height at 90°: 100 mm - Maximum cutting height at 45°: 75 mm - Saw unit tilting range: 0–45° - Maximum cutting width with parallel guide: 1140 mm - Main work table dimensions: 800 × 500 mm - Auxiliary table dimensions: 800 × 860 mm - Auxiliary side table dimensions: 400 × 500 mm - Main motor power: 4.0 kW / approx. 5.5 HP - Power supply: 380 V, 3 phases - Frequency: 50 Hz - Machine weight: 380 kg - CE marking EQUIPMENT: - aluminum panel carriage running on ball bearings - scoring saw unit with belt drive - manual lifting and tilting of the saw using knobs - parallel guide on a steel shaft - cast iron guide bracket with micrometer adjustment - extendable crossbeam - cross guide with two reversible stops Bdjdpfx Aszxw N Rebteg - saw blade guard with extraction port - emergency stop switch - complete set of auxiliary tables as shown in the pictures The machine is in very good visual condition. Compact and robust panel saw suitable for both a carpentry workshop and the production of custom-made furniture. The machine is available immediately. It is possible to start and inspect it before purchase. We offer assistance with loading and the possibility of arranging transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior appointment. It is possible to test the machine on site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Bsdpfx Astddw Ajbtjdg Hydraulic lift, lifting capacity around 1 ton.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 77 h, Martin circular saw T 75 with CE configuration – with only 77 operating hours. High-quality features: - Large, color touch screen - Prex saw head – swivels on both sides including optional package 4: - Stepless speed control, 9.5 kW Bdodpszx Thpjfx Abtsg - Electronic positioning of the parallel fence - Pre-scoring system PreX 3-axis pre-scoring unit incl. pre-scoring saw blade - Miter cutting system RadioCompens with 2-point support - Rip fence length 3.7 m - Cutting width 1100 mm, electronically controlled - Parallel fence electronically controlled and pneumatically lowerable at the end position - Table extension at the rear 610 x 860 mm incl. tool compartment - Front table work surface 600 x 350 mm - Laser – cutting line indicator, green - Operating manual, parts list, accessories The machine has only 77 operating hours and is in its original condition.

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Bdedpfxjzv N Nws Abtjg Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Used equipment, sold as is. Individual sale or package sale can be discussed. Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.

Condition: like new (used), cart length: 2800 mm scoring saw electric angle adjustment of the saw blade: 0-45 degrees electric height adjustment of the saw blade digital display total power: 7.35 kW adjustable speed: 3500/4500/5500 year of manufacture: 2009 Bdsdpfxozx T Nae Abtog power supply: 400V

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Bedpfx Ajh Nx R Tobtodg Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: good (used), functionality: fully functional, rotary table diameter: 1,000 mm, overall weight: 9,000 kg, grinding diameter: 1,000 mm, type of input current: three-phase, workpiece diameter (max.): 1,000 mm, table diameter: 1,000 mm, Hello, Bdsdpfx Aozxpi Aebtog We have a 55kW carousel surface grinder with a 1000mm diameter table for sale. The grinder was purchased last year and comes with a complete set of accessories, including: - Siemens 55kW soft starter - 2 sets of grinding wheels - Original control cabinet - Sludge separator - Tank with pump We invite you to make a purchase.

Condition: used, Year of construction: 1978, Sliding carriage: 2500 mm Cutting width: 1500 mm Bdjdpfxezxq U Tj Abtsg Scoring cutter, miter stop Location: Nattheim

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, table load: 25,000 kg, spindle diameter: 132 mm, spindle speed (max.): 2,500 rpm, total height: 50 mm, total length: 80 mm, total width: 50 mm, table length: 2,000 mm, table width: 1,750 mm, feed length W-axis: 10,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, rotational speed (max.): 2 rpm, travel distance W-axis: 800 mm, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, workpiece weight (max.): 25,000 kg, power: 37 kW (50.31 HP), REM CPAF 132 | CNC Table Boring & Milling Machine | Fanuc 31i-A Fully functional CNC horizontal boring mill — manufactured by REM Bacau (2016), revised and updated in 2022. Running under power and available for immediate inspection. MILLING & BORING HEAD: • Boring Spindle Diameter: 132 mm Bsdpfx Abjrwx U Istjdg • Spindle Taper: ISO 50 • Speed Ranges: 2 • Spindle Speed: 0–2,500 rpm • Tool Clamping: Automatic • Main Motor Power (S1): 37 kW ROTARY TABLE: • Dimensions: 1,750 × 2,000 mm • Indexing: 360,000 × 0.001° • Indexing Accuracy: 6 arc seconds • Max. Hydrostatic Load: 25,000 kg AXIS TRAVELS: • X (Cross Slide): 2,500 mm • Y (Headstock): 1,600 mm • Z (Spindle): 800 mm • W (Column Back/Forth): 1,100 mm FEEDS: • X/Y/Z Work Feed: 2–10,000 mm/min • W Work Feed: 2–6,000 mm/min • B-Axis Feed: 0.025–3 rpm • Lead Screws: Ball-screw on all linear axes CNC CONTROL: Fanuc 31i-A Note: Requires new X-axis telescopic covers (priced accordingly). Machine is running under power — inspection welcomed anytime. Manufactured by REM Bacau – Romania. Export worldwide. Contact us for full specs and pricing.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, maximum distance between units: 3.3 m two motors, 2.2 kW each blade tilt adjustable cutting angle in the range of -45/+45 degrees maximum blade diameter: 330 mm pneumatic clamping devices blade speed: 3765 rpm Bsdpfx Abezxpr Djtedg CE marking

Condition: used, Year of construction: 1977, total height: 500 mm, total length: 3,060 mm, total width: 1,250 mm, Colour: Blue Empty weight: 150 kg - Details: - └ Description: Table 3060x1250 lift height 1350 mm lift capacity 3000 kg Bjdpfx Abjzxrvlotjdg - Year: 1977 - Documentation available: No - CE certificate present: No - Transport dimensions: 3060mm x 1250mm x 500mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, Motor-adjustable parallel guide; length stop with display; single-sided motorized tilting; sliding carriage, 3000 mm; 5.5 kW; scoring cutter; cutting width 1000 mm. Location: Nattheim. Bsdpfxjzx Tmfs Abtedg

Condition: good (used), SCM SC3C Minimax panel saw, 225 cm Bedpfxezxqg Ns Abtedg Table: 225 cm, Main motor: 5 kW Scoring saw: 80 mm diameter Max. blade diameter: 315 mm, Blade tilt and vertical adjustment are manual Cutting width on the right side: 90 cm Machine in good condition, Year: 2021

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Weight: 1.450 kg - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: Automatic - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 1450kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bdodpfxeyvh Rvo Abteg Yorick Diebels

Condition: used, Year of construction: 2008, functionality: fully functional, total height: 2,100 mm, total length: 1,800 mm, total width: 1,000 mm, type of input current: three-phase, overall weight: 255 kg, table load: 200 kg, input voltage: 400 V, A down-draft table combines a workbench with an exhaust/filtration system. Fumes and dust are extracted through the tabletop and rear panel and filtered by filters mounted in the table structure. The table can be placed anywhere, at any welding or grinding station. A three-stage spark separator enhances safety and meets the most stringent international guidelines for fumes and dust. DraftMax Advance features a manually operated filter cleaning mechanism activated by a button. In addition, the DraftMax Ultra model can be equipped with an automatic start/stop device, which provides even easier operation. This is an ideal table for very intensive welding or grinding applications. Work surface dimensions: 1366 mm x 750 mm Weight: 255 kg Noise level: 67 dB (version with silencer and HEPA filter) Supply voltage: 400 V/3~/50 Hz Motor power: 2.2 kW Capacity: 2500 m³/h Filtration area: 2 x 26 m² Filtration efficiency: >99.9% (filter class: M) Bdedjzukv Nopfx Abtjg HEPA filter (required for stainless steel welding) Noise silencer Stock number: 1151

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Horizontal boring machine TOS WHN 13.8 CNC Control system: Heidenhain 530 Spindle diameter: 130 mm Working table: 1800 x 2500 mm Working spindle taper: ISO 50 Spindle speed: 10-3000 rpm Working spindle extension: W-800 mm Vertical spindle adjustment: Y-2500 mm Transverse table adjustment: X-4000 mm Longitudinal stand adjustment: Z-1600 mm Bdedpezx Ad Hefx Abtog Feed range X, Y, Z, W: 4-3000 mm/min Table load: 20 t Power consumption: 82 kW

Condition: excellent (used), Catalog number: 8057 TECHNICAL DATA - max. blade diameter: 400mm - blade arbor diameter: 30mm - max. cutting height: 120mm Bodpfx Aozx Sg Rsbtedg - spindle lock - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on carriage: 1000mm - cutting width with guide: 1050mm - main motor: 3kW - with extension - dimensions of the table with extension: 1050x1730mm - 3 types of rotational speeds - dimensions (L/W/H): 2700x1750x1000mm - weight: 860kg ADVANTAGES – Made in Germany – Blade guard – Large blade: 400mm – Used saw, very good condition Net price: 7900 PLN Net price: 1881 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2002, total height: 1,870 mm, total length: 2,100 mm, total width: 2,720 mm, Colour: Grey Weight: 1.600 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 595001 3 16 - Main motor power [kW]: 6.5 - Voltage [V]: 400 - Current consumption [A]: 15 - Fuse [A]: 20 Bdodpfx Asyf H H Hsbtsg - Transport dimensions: 2100mm x 2720mm x 1870mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC-Steuerung Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Bsdpfozx Nxwsx Abtjdg Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: excellent (used), 5.5 kW motor Table length: 300 cm Bdodpfx Abozxfbuotog Scoring unit: 0.75 kW motor Ground clearance: 160 cm Electrically adjustable blade, scoring unit, and base frame. New blades.

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 Cross-chains for transporting panel packs in the lifting table Lifting scissor table (mm) 4300 x 1600 Rear pushers (N.) 1 with clamps / grippers 12 Turning device (rotating unit) at 90° Max. cutting width (mm) 4300 - Useful stroke of the pushing system (mm) 4300 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 4 (3 x 2160mm x 650mm + 1 x 2160mm x 800mm) Bsdpfxszxn Eco Abtodg Total power (Kw) OPTIONAL: 200062) Automatic unloading system for cut panels and stacking system AUTOMATECH ROBOTECH with Robot KUKA Mod. KR 470-2 PA

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Bdsdpfx Aozxcmhjbtjg Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm