Used Forging for sale (177)

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating mounting / NEW unit / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - For excavators from 5 to 15 tons - Universal interface for mounting different adapter plates - S420: double-walled housing made of high-strength S420 steel - WEARPLATE: Housing with replaceable wear plates - LOW PROFILE: Low profile design - Indirect V-belt drive with 4 belts - Drive designed for hydraulic motor depending on the carrier unit’s flow rate - 4D ROLLER: reinforced support roller 152 mm Ø, with double tapered roller bearing, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front protection with chains - Rear protection made of rubber - Colour: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 units, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Cylinder capacity in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 100–300 - Required hydraulic flow rate in l/min (min-max): 55–150 Psdpfxeyfvhye Afhjpl OPT 099 Floating Mount (Parallel Linkage) OPT 555 Pendulum Adapter 3 hydraulic hoses are required: pressure line, return line, and leakage oil line. Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a wide selection of various Seppi M. products available for immediate delivery! Mr. Herden (phone) is happy to assist you. Upon request, we are happy to provide financing options. We are an official sales and service partner for Westtech, OilQuick, Holp, Magni Telehandlers, DMS, Gierking GMT, Weber MT, Seppi M., JCB Construction Equipment, Mercedes-Benz, and Iveco. With 800 used vehicles, we are also one of Germany’s largest commercial vehicle dealers. We supply the complete Seppi M. product line! Errors and prior sale excepted! Rental possible. = Further information = New: Yes For further details, please contact Tobias Ebert.

Year of construction: 2024, condition: used, Seppi M. BMS 125 Forestry Mulcher / incl. Rotator / Year of manufacture: 2024 / DEMO unit / in stock & immediately available / excellent condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power line corridors - Mulches shrubs and wood up to 30 cm in diameter - Suitable for excavators from 13 to 30 t - For mounting to various quick coupler plates - Designed for hydraulic motor drive depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced double-walled chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Chain protection at the front - Chain protection at the rear - Sandwich-type skid shoes, height adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST inclined-axis piston motor - with automatic displacement regulation 60-80 cm³ and overpressure valve - displacement in cm³ (min-max): 60-80 - required pressure in bar (min-max): 200-350 - required hydraulic oil flow: 80-170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for rear hood opening Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net 3 hydraulic lines required for rotor: supply, return, and drain. An additional hydraulic circuit is required for the hood. Unit is supplied without hoses or couplers. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We carry a very large selection of various Seppi M. products available from stock! Mr. Herden (Tel. ...) will be happy to assist you. Financing offer available upon request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni Telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. Podsyfvbgopfx Afhspl We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the complete Seppi M. product range for you! Errors excepted...

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotating Motor / MS08 / 5–10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-access locations - Mulches brush and shrubs up to 10 cm in diameter - For excavators from 5–10 tonnes Pjdpfxsyfvapj Afhopl - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine's hydraulic flow - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Skids, height-adjustable, reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forest rotor with fixed MINI DUO tools (2 carbide inserts) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22–45 cm³ and pressure relief valve - Displacement in cm³ (min–max): 22–45 - Required hydraulic pressure in bar (min–max): 150–250 - Required hydraulic flow in l/min (min–max): 40–100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net For operation, an independent hydraulic system is recommended. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is needed. The unit is supplied without hoses, connectors, or adapter plate. Mr. Herden (phone ...) will be pleased to assist you. Financing options are available upon request. We are an official sales and service partner for Seppi M., Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Magni Telehandlers, JCB Construction Equipment, Mercedes-Benz, and Iveco. With over 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range! Subject to errors and prior sale! Rental possible New: Yes For further details, please contact Tobias Ebert.

Condition: new, axle configuration: 2 axles, For vehicle inquiries, Mr. Herden will assist you (by phone). Ppsdpfx Afjyfu Ncjhjl Brian James Race Sport / High-quality, enclosed premium car transporter / Loading area length: 5.03 m / Permissible total weight: 3,000 kg / New vehicle Price: €23,390.00 net / €27,834.10 gross Dimensions and loading volume: - Loading area width (m): 2.1 - Overall width (m): 2.49 - Loading area length (m): 5.03 - Overall length (m): 6.9 - Loading area height (m): 0.52 - Interior height (m): 1.96 - Passage height (m): 1.88 - Overall height (m): 2.56 - Permissible total weight (kg): 3,000 - Maximum payload (kg): 1,685 Equipment: - Including forged steel coupling head with integrated high-security lock - Rear support stands - Electric winch with wireless remote control - Spare wheel - Alloy wheels - Front floor storage box - On-board battery with control unit (waterproof housing with control switches, battery level indicator and outputs for the winch and tipper drive, as well as a separate connection for charging the battery) - LED interior lighting - Lashing straps - Low-profile wheel chocks - Small front side doors - Split side doors We have a very large selection of various Brian James trailers available immediately from our stock! Mr. Herden (phone) will be pleased to assist you. Upon request, we are also happy to provide you with a financing offer. We are an official sales and service partner for Westtech. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Holp. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full range of Brian James products! Subject to errors and prior sale. Internal No: 074570 = Further information = Gross vehicle weight: 3,000 kg External dimensions: 0x2490x2560 Please contact Tobias Ebert for further information.

Year of construction: 2023, condition: used, Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / Demo Unit / Swing Motor / Year of Manufacture: 2023 / In stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - For mulching along riverbanks, in forests, and in other hard-to-reach areas - Mulches shrubs and brushwood up to 10 cm Ø Pjdpeyfu H Iofx Afhjpl - For excavators from 5-10 tonnes - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor depending on the oil flow of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid runners, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, Total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29-58 - Required hydraulic pressure in bar (min-max): 150-250 - Required hydraulic flow rate in l/min (min-max): 60 – 130 OPT372 Hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and assembly = €880.00 net We have many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for the drive. Three hydraulic lines are required: supply, return, and drain. Additionally, a double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connectors, or adapter plate. We are an official Seppi M. sales and service partner and also represent the brands Westtech Woodcracker, DMS, Magni Telehandlers, JCB Construction Machinery, Mercedes-Benz, Iveco, and with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We can supply the complete Seppi M. product range for you! Subject to errors and prior sale! Internal No.: 170068 Rental possible = More information = Please contact Tobias Ebert for further details.

Condition: used, For inquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Total width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavator mounting, for mulching along riverbanks, in forests, on railway lines, and other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10-20 tons - Suitable for installation on various mounting plates - Drive designed for hydraulic motor, depending on the carrier unit's hydraulic flow - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge across entire hood length - Front and rear heavy-duty chain guards Pjdpfx Asyfu Hzefhepl - Height-adjustable skid shoes, reinforced with hardmetal plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, spare part no. 176.02.005 OPT 465 M-BOOST Angled Axis Piston Motor - With automatic displacement control, 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60-80 - Required pressure in bar (min-max): 200-350 - Required hydraulic flow: 100-150 l/min Intermediate adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic power unit is recommended for operation. Three hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is additionally required for the hydraulic hood. The device is delivered without hoses, couplings, or mounting plate. We stock a large selection of various Seppi M. products, available for immediate delivery! Mr. Herden (by phone) will be happy to assist you. We can also offer you attractive financing options on request. We are official Seppi M. distributor and service partner. We are official Westtech distributor and service partner. We are official Gierking GMT distributor and service partner. We are official OilQuick distributor and service partner. We are official Weber MT distributor and service partner. We are official Holp distributor and service partner. We are official DMS distributor and service partner. We are official Magni telehandler distributor and service partner. We are official JCB construction machinery distributor and service partner. We are official Mercedes-Benz distributor and service partner. We are official Iveco distributor and service partner. With over 800 used commercial vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Rental available. = Further information = New: Yes For more information, please contact Tobias Ebert.

Condition: used, Seppi M. BMS-F 125 Forestry Mulcher / incl. Rotator / NEW / in stock & immediately available Price: €27,190 net / €32,356.10 gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulching attachment for excavators, ideal for mulching along riverbanks, in forests, along railway lines, and other hard-to-access areas - Shreds brushwood and timber up to 20 cm diameter - Suitable for 10–20 ton excavators - Designed for mounting on various adapter plates - Drive designed for hydraulic motor depending on carrier flow rate - Indirect V-belt drive with 5 belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Full-length hinge on hood - Front protection with chains - Rear protection with chains - Adjustable, reinforced skid shoes with carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts per tool) - 27 pcs, part no. 176.02.005 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60–80 cm³ and overpressure valve - Displacement in cm³ (min–max): 60–80 - Required pressure in bar (min–max): 200–350 - Required hydraulic flow: 100–150 l/min OPT 372 Hydraulic 190° Rotation Device OPT 158 Hydraulically adjustable hood - 24V solenoid valve to open rear hood An independent hydraulic system is recommended for operation. Three hydraulic lines required for the rotor: supply, return, and leak oil. Unit is supplied without hoses, connectors, or adapter plate. We stock a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) available for immediate delivery. Our warehouse holds a very large selection of various Seppi M. products ready for immediate delivery! Mr. Herden (Tel. ) will be pleased to assist you. Financing offers available on request. We are official distribution and service partners of: - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Westtech Pjdpfeyfryfjx Afhepl - JCB construction machinery - Mercedes-Benz - Iveco With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We can supply you with the complete Seppi M. product range! Errors and prior sale excepted! Rental available = Further Information = New: Yes Contact Tobias Ebert for more information.

Condition: used, Seppi M. BMS-F 125 Forestry Mulcher / NEW / in stock & immediately available Price: €22,390.00 net / €26,644.10 gross Ppsdpoyfrhpjfx Afhjl Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 667 kg - Mulching attachment for excavators, suitable for mulching along riverbanks, in forests, along railway lines, and in other hard-to-access locations - Mulches brushwood and timber up to 20 cm in diameter - For excavators from 10-20 tons - Suitable for mounting on various adapter plates - Drive designed for hydraulic motor, depending on the carrier's flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter-blades - Hydraulically adjustable hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid shoes, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide inserts) - 27 pcs, spare part no. 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60-80 - Required pressure in bar (min-max): 200-350 - Required hydraulic flow rate: 100-150 l/min Intermediate adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. Three hydraulic lines are required for the rotor: feed, return and case drain. The unit is supplied without hoses, couplings and adapter plate. We have many adapter plates (MS01/MS03/MS08/CW05/CW10/CW20/OQ65/OQ70/55/etc...) in stock and immediately available. Our warehouse holds a wide selection of various Seppi M. products, all ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. We are also happy to provide you with a financing offer on request. We are official distributor and service partner for: - Magni telescopic handlers - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Westtech - JCB construction machinery - Mercedes-Benz - Iveco With around 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! Rental possible = Further Information = New: Yes Please contact Tobias Ebert for further information.

Year of construction: 2023, condition: used, Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / DEMO Unit / Year of Manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Shreds brush and woody material up to 10 cm Ø - For excavators from 5-10 tons - Can be mounted to various attachment plates - Driven by hydraulic motor (dependent on carrier unit’s hydraulic flow) - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter knives - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Height-adjustable skid shoes reinforced with carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts per tool) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic oil flow in l/min (min-max): 60–130 Intermediary adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. An independent hydraulic system is recommended for operation. Three hydraulic lines are required: pressure, return, and drain. A double-acting hydraulic connection is additionally needed for the hydraulic hood. Unit is supplied without hoses, fittings, or adapter plate. Pjdjyfq N Eepfx Afhopl We are an official Seppi M. sales and service partner and also represent Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco as certified partners. With 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We offer the complete Seppi M. product range! Subject to errors and prior sale! Internal ref. no.: 170048 Rental possible = Further information = Please contact Tobias Ebert for more information.

Condition: used, Seppi M. H-SMO-B 125 Mulcher / incl. Van Osch Mount / incl. floating linkage / NEW machine / in stock & immediately available Price: €12,290.00 net / €14,625.10 gross - Working width: 125 cm - Total width: 140 cm - Depth: 120 cm - Height: 60 cm - Weight: 380 kg - Support roller: 152 mm - V-belts: 4 - Robust and maneuverable unit for attachment to excavators or crawler vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 13 tonnes - Compatible with various mounting plates - Drive designed for hydraulic motor, depending on the carrier’s flow rate - Indirect V-belt drive with 4 V-belts - Drop-forged counter blades - Double-walled housing made of high-strength steel - Adjustable discharge hood with rear rubber guard - Reinforced support roller with double conical roller bearings, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO hammer flails (standard) - 12 pieces, spare part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29-58 - Required hydraulic pressure in bar (min-max): 150-250 - Required hydraulic flow in l/min (min-max): 60-120 OPT 099 Floating linkage (parallelogram guiding) Including Weld-on Adapter Frame WOAF – KNSW80 (Van Osch mount) Including hydraulic hoses, see photos 3 hydraulic lines required: supply, return, and drain Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We stock a wide selection of various Seppi M. products for immediate delivery! Mr. Herden (Tel.) will be happy to assist you. Financing options available upon request. We are official dealer and service partner for: - Westtech - OilQuick - Holp - Magni Telehandlers - DMS - Gierking GMT - Weber MT - Seppi M. - JCB Construction Machinery - Mercedes-Benz Pjdpfx Ajyfqqpsfhopl - Iveco In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Seppi M. product range! Subject to prior sale and errors! Internal no.: 360029 Rental possible = More information = New: Yes Contact Tobias Ebert for further information.

Condition: used, Seppi M. BMS 125 Mulcher / NEW / In stock & available immediately Price: €35,190 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadways, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 t - Can be mounted on various adapter plates - Drive designed for hydraulic motor depending on the oil flow rate of the carrier vehicle - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Sandwich-style skid runners, height-adjustable, reinforced with a tungsten carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST oblique-axis piston motor - with automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 / 80 - Required pressure in bar (min-max): 200 / 350 - Required hydraulic oil flow: 80 / 170 l/min OPT 372 hydraulic 190° swivel device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Three hydraulic lines are required for the rotor: supply, return, and drain. An additional hydraulic circuit is needed for the hood. The unit is supplied without hoses or fittings. Numerous other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available for immediate delivery. We have a wide range of Seppi M. products available immediately in our warehouse! Simply contact us for details at . Upon request, we are happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Ppodpfxoyfqp Es Afhol We deliver the entire Seppi M. range for you! Subject to errors and prior sale! Rental possible = Additional information = New: Yes Contact Tobias Ebert for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - For mounting onto various adapter plates - Drive prepared for hydraulic motor based on carrier flow rate - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Adjustable, reinforced skid shoes with carbide plate - Color: red RAL3020 · anthracite RAL7021 Ppsdpfxeyfqpxj Afhsl OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22–45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22–45 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic flow in l/min (min-max): 40–100 Intermediate adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Optional: MS08 adapter plate including bolts and installation = €1,410.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drainage. Additionally, a double-acting hydraulic connection is needed for the hydraulic hood. The device is supplied without hoses, connectors, and adapter plate. Mr. Herden (Tel.) is happy to assist you. Financing options available upon request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range for you! Errors and prior sale excepted! Rental available = Further Information = New: Yes Contact Tobias Ebert for further details.

Year of construction: 2023, condition: used, Seppi M. BMS 125 Forestry Mulcher / NEW / In stock & immediately available Price: €29,890.00 net / €35,569.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulching attachment for excavators - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for cleaning gas and power lines - Shreds brushwood and timber up to 30 cm in diameter - For excavators from 13 to 30 t - Compatible with various mounting plates - Drive designed for hydraulic motor, depending on the carrier’s flow rate - Indirect belt drive with 5 V-belts - Reinforced double-walled housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools featuring tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 - Wear-resistant tool holders - Replaceable rotor shaft stubs OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60–80 cm³ and pressure relief valve - Displacement in cm³ (min–max): 60–80 - Required hydraulic pressure in bar (min–max): 200–350 Pedeyfqbnjpfx Afhepl - Required hydraulic oil flow: 80–170 l/min Three hydraulic hoses are required: supply, return, and drain. The device is supplied without hoses, fittings, or mounting plates. Many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We have a very large selection of various Seppi M. products immediately available in our warehouse! Feel free to contact us for more information. We are happy to provide financing offers on request. We are an official Seppi M. distributor and service partner. We are an official Magni telehandler distributor and service partner. We are an official DMS distributor and service partner. We are an official Westtech distributor and service partner. We are an official JCB construction machinery distributor and service partner. We are an official Mercedes-Benz distributor and service partner. We are an official Iveco distributor and service partner. We are an official Holp distributor and service partner. We are an official OilQuick distributor and service partner. Additionally, with 800 used vehicles in stock, we are one of Germany’s largest commercial vehicle dealers. We supply the complete Seppi M. product range! Subject to errors and prior sale! Rental available = More information = New: Yes Please contact Tobias Ebert for further information.

Condition: used, Seppi M. H-SMO-B 125 Mulcher / NEW / In stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Robust and manoeuvrable attachment for excavators or tracked vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tonnes - Can be fitted to various mounting plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect V-belt drive with 4 V-belts - Drop-forged counter blades - Double-walled housing made from high-strength steel - Adjustable discharge hood, rear with rubber protection - Reinforced support roller with double taper roller bearing, height-adjustable by 5 cm - Rotor wall thickness: 12.5 mm Ppjdpfx Afeyfp S Eehsl - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29–58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29–58 - Required hydraulic pressure in bar (min-max): 150–250 - Required hydraulic oil flow in l/min (min-max): 60–120 OPT 099 Floating attachment (parallelogram guidance) Optional: MS08 adapter plate including bolts and installation = €750.00 net 3 hydraulic lines required: pressure, return, and drain line. Unit is delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Our warehouse holds a very large selection of various Seppi M. products, available at short notice! Simply contact us at . We are happy to provide you with a tailored finance offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We deliver the full Seppi M. range for you! Errors and prior sale excepted! Rental possible = Further Information = New: Yes Contact Tobias Ebert for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Kinshofer Clamshell Bucket / Two-Shell Grab / Grapple / KM 604 350 / NEW Price: €5,150.00 net / €6,128.50 gross Capacity (liters): 350 Overall width E (mm): 650 Max. opening (mm): 1,390 Number of teeth: 5 Weight (kg): 240 Closing force (kN): 20 Load capacity (kg): 3,000 Psdpfx Ajyfpwhofhepl - Includes bolt-on excavator teeth - Includes KM 04 F rotator Operating pressure at volumetric flow: 26 – 32 MPa (260 – 320 bar) at 40 max. 75 l/min The KM 604 is a versatile clamshell grab for everyday applications – robust, functional and cost-effective. - Maximum load height due to compact design with horizontally arranged cylinder - Long service life thanks to cutting edge material with Brinell hardness 500 HB and generously dimensioned bearings - Synchronous shell movement via a strong, forged balancing linkage - Bolt-on excavator teeth included - Excellent digging characteristics thanks to high closing force (20 kN at 26 MPa operating pressure) We have a wide selection of various attachments available from stock! Mr. Herden (phone) will be pleased to assist you. Upon request, we can also provide you with a financing offer. We are an official Magni telehandler distributor and service partner. We are an official Westtech distributor and service partner. We are an official Gierking GMT distributor and service partner. We are an official OilQuick distributor and service partner. We are an official Weber MT distributor and service partner. We are an official Holp distributor and service partner. We are an official DMS distributor and service partner. We are an official Seppi M. distributor and service partner. We are an official JCB construction machinery distributor and service partner. We are an official Mercedes-Benz distributor and service partner. We are an official Iveco distributor and service partner. Moreover, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and interim sale reserved! Rental possible = More information = New: Yes Contact Tobias Ebert for more information.

Condition: new, functionality: fully functional, power: 426.59 kW (580.00 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, energy efficiency: E, brakes: intarder, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, cruise control, differential lock, hydraulics, navigation system, onboard computer, parking heater, soot filter, spoiler, IVECO S-WAY 580 FULL AIR Brand new, unregistered !!!! IMMEDIATE DELIVERY !!!! EURO 6E, Cursor 13 engine, 580 HP, Hi-Tronix 12-speed automatic gearbox, front and rear air suspension, As Active Space cab, Mirror Cam rearview system with internal monitors, Intarder, Adaptive Cruise Control, LDWS (Lane Departure Warning System), AEBS (Advanced Emergency Braking System), Hill Holder, ISA (Intelligent Speed Assist) with road sign recognition, differential lock, Full Touchscreen Infotainment Display 10", Hi-Cruise GPS, reversing camera with obstacle monitoring system, BSIS (Blind Spot Information System), automatic climate control, stationary air conditioning, Webasto heater, central locking, electric windows, electric and heated mirrors, driver's seat in sprung fabric with heated armrest and lumbar support, fridge, 2 beds, Eco-Normal Mode, fog lights, tyre pressure monitoring sensors, sunroof, sun visor, digital tachograph 4.1 plus other standard features. Road tractor equipped with full fairings, spoilers, and double diesel tank (total 1,320L), Alcoa forged and mirror-polished alloy wheels. MASON TRUCKS Via Vicenza, 31 Vedelago (Treviso) Ppjdpfx Afswulfhehel

Condition: new, Year of construction: 2025, throat depth: 350 mm, table width: 700 mm, table length: 1,100 mm, stroke adjustment: 150 mm, pressing force: 250 t, stroke length: 160 mm, power: 22 kW (29.91 HP), Equipment: documentation/manual, safety light barrier, An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 250 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suited for serial production. Key Advantages: - Stable stroke performance and high repeatability for mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready use with PLC control and dual hand/foot operation Applications: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel structure frame • Four-sided guided slideways • Spheroidal cast iron connecting rod and gear seats • Crankshaft and driven shafts made of 4140 quenched and tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual solenoid safety valve • Manually adjustable stroke • Light curtain finger-hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • In accordance with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of die configured to your specifications • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Ton Throat depth: 350 mm Table–ram distance: 520 mm Ram–table clearance: 630 mm Distance between side frames: 520 mm Ram adjustment (regulation): 150 mm Approximate press width: 2000 mm Approximate press depth: 2500 mm Approximate press height: 3100 mm Front anchorage dimension: 930 mm Side anchorage dimension: 1430 mm Table bore diameter: Ø250 mm Table size: 700×1100 mm Die mounting hole diameter: Ø60 mm Ram size: 670×380 mm Podpfx Afex N Nfbshjpl Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: If you require changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales support are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, throat depth: 320 mm, table width: 920 mm, table length: 660 mm, pressing force: 160 t, ram bore: 55 mm, power: 15 kW (20.39 HP), punching force: 160 t, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical presses that operate with force generated via an eccentric mechanism and are used in cold forming operations such as punching, cutting, and forming with dies. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 150 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance for serial production. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-oriented design (light curtain + safety systems) - Reduced maintenance needs with centralized automatic lubrication - PLC control + dual hand/foot control for production-ready operation Application Areas - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided slide guidance • Spheroidal cast iron connecting rod and gear bushings • 4140 quenched and tempered steel crankshaft and transmission shafts • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Finger and hand protection with light curtain safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor operation • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mountings • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare die plate • Decoiler, feeder, and straightener • One set of die to customer specifications • 8-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Bed-to-ram distance: 500 mm Slide-to-table distance: 540 mm Distance between uprights: 500 mm Ram adjustment (stroke): 120 mm Approx. width: 1600 mm Approx. depth: 2280 mm Approx. height: 2750 mm Front anchoring size: 840 mm Side anchoring size: 1300 mm Bed bore diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Floor-to-table height: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approximate weight: 7100 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE Ppsdevtywdepfx Afhol This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, drop-through hole in table: 220 mm, table width: 750 mm, table length: 1,000 mm, stroke adjustment: 140 mm, pressing force: 130 t, ram bore: 55 mm, punching force: 130 t, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are a type of mechanical press powered by the force generated through an eccentric mechanism, commonly used for cold forming processes such as punching, cutting, and die forming. With high production speed and repeatability, they provide an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 125 Ton is engineered for stable operation in cold forming applications. Its rigid steel welded body, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for series production. Key Advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-oriented design (light barrier + safety systems) - Low maintenance requirement thanks to central automatic lubrication - Production-ready operation with PLC control + dual hand/foot controls Fields of Application: - Cold cutting and punching operations - Cold forging applications - Metal die forming - High-volume production lines Ppodpfx Afjvtyvgjhol ✅ STANDARD FEATURES • Steel welded frame • 4-sided slide guidance • Spheroidal cast iron connecting rod and gear bearings • Crankshaft and transfer shafts made from 4140 hardened steel • Central fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier finger/hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Occupational safety regulation compliant • CE-conformant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • 1 die set tailored to specifications • Eight-point slide guide ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Tons Throat depth: 310 mm Distance table–slide: 500 mm Distance between slide and table: 510 mm Distance between uprights: 450 mm Slide adjustment (stroke adjustment): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchorage (footprint): 790 mm Side anchorage (footprint): 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping slot diameter: Ø55 mm Slide size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: Please inform us if you require changes to the technical specifications. ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 670 mm, table length: 950 mm, drop-through hole in table: 180 mm, power: 7.5 kW (10.20 HP), punching force: 100 t, ram bore: 45 mm, stroke adjustment: 120 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 100 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure deliver dependable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light barrier + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Application Areas - Cold cutting and punching operations Ppsdpfx Afsvtx Inohjl - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • 4-sided slide guiding • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety compliant • Dual-coil safety valve • Manually adjustable stroke • Light barrier hand and finger safety protection system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor operation • Compliant with occupational safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare table • Uncoiler, feeder, and straightener • One set of custom die as requested • 8-sided slide guiding ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Bolster–ram distance: 400 mm Slide–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchoring dimension: 710 mm Side anchoring dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die mounting slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: Please inform us if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, drop-through hole in table: 180 mm, table width: 660 mm, table length: 860 mm, stroke adjustment: 110 mm, pressing force: 80 t, power: 5.5 kW (7.48 HP), punching force: 80 t, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates via a force generated by an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. Its rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for mass production. Key Advantages: - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement with centralized automatic lubrication - Production-ready operation with PLC control + dual-hand/foot control Typical Applications: - Cold shearing and punching operations - Cold forging applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel construction frame • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear bushings • Crankshaft and transmission shafts made of 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • Compliant with CE safety directives • Double-coil safety valve • Manually adjustable stroke • Finger–hand protection light curtain safety system • PLC control system • Dual-hand/foot control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety regulation compliant • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounting pads • Touchscreen LCD panel (standard between 150–300 tons) • Hydraulic safety system (standard between 200–300 tons) • Spare bolster plate • Decoiler, feeder, and straightener • One die set to requested specifications • Eight-way slide guides ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–table distance: 420 mm Distance between side frames: 400 mm Ram adjustment (slide adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table size: 540×740 mm Die clamping hole diameter: Ø40 mm Ram size: 370×230 mm Bed height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approximate weight: 4000 kg Pjdevtx H Rspfx Afhopl Note: Please inform us if you require modifications in the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are directly managed by CRONOSSTECH.

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Podpocuxpqsfx Afhopl Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display Pedpfjx Sr Dfox Afhjpl * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Ppsdeyacyxepfx Afhel

Condition: good (used), Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V Pedpfx Afecvpuaehopl -Dimensions: 1000/550/H1200 mm -Weight: 120 kg