Used Friction Press for sale (12,610)

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Lrsdpfx Aeyti Ipodvei

Condition: used, Year of construction: 2009, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, Press container Husmann, with big feeding opening Lrodpfx Aowampfodvji

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW Lrjdpfxjfhb Tie Advoi 400 V

Year of construction: 2010, condition: used, Static press ATS: 5,5 kW 400 V 32 A Ledpfx Ashqb Nmjdvjri Container: 32 m3

Year of construction: 2011, condition: used, Capacity 20 m3 Lrsdpfx Adeiinryovsi 5,5 kW 400 A Weight 5650 kg

Condition: used, Year of construction: 2004, control Siemens Simatic OP7 Pressing force 150 t opening capacity 30 t Workpiece weight bottom/top 16/15 t table-size 1.600 x 1.300 mm height of stroke 1.400 mm number of columns 4 Column spacing 1.700 × 1.370 mm dayligth 1.300 mm table height over floor 610 mm Overall dimensions (W x D x H) ca. 2.000 × 2.550 × 4.600 mm Total weight approx. 19.000 kg Piston - range of rotation 100° / 150° / 180° ° Cylinder diameter Ø 440 mm piston rod Ø 300 mm extension 300 mm return speed 35–50 mm/min Idle speed 65–85 mm/s Pressing speed 8 mm/s hydraulic drive 18,5 kW total power requirement ca. 18,5 kW Ljdjywnwfepfx Advsri In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Year of construction: 2021, condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Bending length: 3050 mm Pressing force: 320 t Maximum pressure: 280 bar Motor power: 18.5 kW Lrjdeyhdrrspfx Advsi Oil tank capacity: 400 l Weight: 14,700 kg

Condition: excellent (used), Year of construction: 2006, Manufacturer: LVD Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical specifications: Max. press force: 2,200 kN (220 tons) Working length: 3,050 mm Clearance between uprights: 2,600 mm Max. ram stroke: 450 mm Max. table–ram distance: 685 mm Lsdpfxsyhdyie Adveri Throat depth: 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: variable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other data: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg

Condition: excellent (used), Year of construction: 1997, Manufacturer: AMADA Europe S.A. Model: HFB 80 Lrjdpex H Sl Sofx Advei Year of manufacture: 1997 Serial number: HFB0 80 25 R970112 Pressing force: 800 kN Maximum stroke: 200 mm Power supply: 415 V / 50 Hz Number of phases: 3 Rated current: 171 A Machine weight: 5750 kg

Condition: excellent (used), Capacity: 2.5 tons Year of manufacture: 2017 Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Lrjdpjw U Aurefx Advji Transport wheels included Tools not included in delivery

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Serial number: 8293 Press force: 120 t Lredpfx Asxna S Hsdvei Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Heating system: Infrared Overall dimensions: Width: 4000 mm Lrjdpfsw A Rdrox Advei Depth: 2600 mm Height: 2000 mm

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Ledpeywztgjfx Advsri Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Lrsdpfsywztaox Advji Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Including tools

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5000 kg This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information. Application Types Pressing / Laminating Lsdpox R E Rcofx Advori

Year of construction: 2026, condition: new, New machine Lsdoywpt Ispfx Advjri Year of manufacture: 2026 The space-saving, swiveling vacuum press with a pressing area of 3500 mm x 1420 mm. Technical standard equipment of the vacuum press: Unless otherwise agreed, the vacuum press is delivered powder-coated in RAL 7012 and RAL 7035. Use of special colours is possible but must be agreed in advance and may incur additional charges. Welded table frame designed for professional use, mounted on a swiveling trolley, stands on 4 swivel castors, surface load capacity 150 kg. When not in use, the machine can be swiveled and locked into a space-saving position, reducing its depth to just 800 mm. The table surface consists of a 22 mm thick HPL/MDF board, covered in the pressing area with a slotted vacuum distributor plate made of MDF. Membrane frame opening is assisted by 2 gas struts mounted on the sides of the machine. The installed membrane is made of natural rubber, 2 mm thick, 780% elongation at break, and heat resistance up to 70°C. The membrane is fixed using a clamping system for efficient membrane changes. The continuous sealing of the pressing chamber is ensured by a sealing profile in the membrane frame. Oil-lubricated vacuum pump with 40 m³/h suction capacity and two vacuum tanks with a total capacity of 200 liters. Press chamber evacuation and ventilation is controlled via a 3-way ball valve at the front of the machine. The machine is delivered pre-assembled on a pallet. Please note that unloading requires a forklift with sufficient lifting capacity and fork length. You can also book initial setup and a brief instruction session by one of our technicians. If required, we will be happy to provide you with a separate quote for this service. Summary of key specifications: - Welded frame construction - Highly flexible natural rubber membrane, thickness: 2 mm, elongation at break: 780%, excellent recovery properties, suitable for temperatures up to 70°C - Vacuum distributor plate made of MDF - Digital vacuum control VAK-CONTROL 1 with automatic shut-off - Vacuum pump: 40 m³/h, oil-lubricated - Max. vacuum: -0.99 bar - Max. pressing pressure up to 9.9 t/m² - Power supply: 1.40 kW (400 Volt) - Vacuum tank: 200 liters - 4 swivel castors with brakes - Additional 13 mm vacuum connection - Pressing area: 3500 x 1420 mm - Table height to vacuum distributor plate: approx. 895 mm - Machine height closed: approx. 960 mm - Machine height closed with cover plate: approx. 1030 mm - Setup dimensions, operational: 3790 x 1700 x 2150 mm (LxWxH) - Setup dimensions, swiveled: 3790 x 800 x 1750 mm (LxWxH) Commodity code: 84659400 Net weight: 570 kg Gross weight: 660 kg Availability: April/May 2026 Location: Flörsheim

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, We are selling an as-new HSM baler, Model V-Press 504, from 2023. The machine was only used for demonstration purposes and is in absolutely mint condition (see photo). Technical data and information: - Small footprint - Modern microprocessor control with membrane keypad and graphic-capable text display - Selectable programs for cardboard and film - Secured filling flap and bale removal - Bale removal and transport with bale removal trolley - Inclination monitoring of the press plate - Automatic return stroke - Low-maintenance hydraulics - Machine dimensions: 1,020 x 812 x 1,922 mm (W x D x H) - Weight: approx. 290 kg - Motor power: 1.1 kW - Connection: 1 x 230 V / 50 Hz Schuko plug - Pressing force: 40 kN - Bale weight (depending on material): up to 60 kg Ljdpfx Aoywi Hbsdvsri - Bale size: max. 700 x 500 x 600 mm (L x W x H) - Semi-automatic 2-fold strapping with strapping tape

Condition: good (used), Year of construction: 1984, Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press Lodpfxoywzh Re Advjri -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5/6 kW -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

Condition: used, Year of construction: 1973, machine/vehicle number: 104530, pression: 100 t throat: 350 mm table size: 690 x 840 mm Ledpsddhw Ssfx Advsri clearance hole in the die: 160 mm Ø tappet area: 450 x 600 mm tappet adjustment: 80 mm stroke adjustment: 8 - 100 mm number of strokes: 60 /min engine: 380 V, 5,5 kW space needed: 1850 x 1850 x 2650 mm weight: 6800 kg

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  Capacity: 1,500 kg/h (apples) Application: Juice extraction from crushed apples Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Ledpfx Aeyw Aa Ijdvsri

Condition: good (used), Nagel Citoborma 280B Paper Drill This machine is 100% functional. It is one of the newest models. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the paper drill has an automatic table lock that releases after each cycle. Excellent condition. Solid construction – weight 76 kg. 380V power supply Lrsdpfjyrz S Rex Advoi Two drilling heads with adjustable spacing from 45-120 mm. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: good (used), Stago PB 2015 Paper Drill This is the latest drill from Stago, originally from the office of a large company. The machine is 100% functional. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock. Sturdy construction – weighs approximately 70 kg. 230V power supply Two drilling heads. Drill diameter: 2-10 mm. Stack height: 60 mm. Lrjdpfeyrz Swex Advoi The machine has an adjustable spacing between the heads. The drill has been serviced. Drills and tools are included.

Condition: used, Year of construction: 1950, pressure 120 t draw back pressure 20 t piston stroke 500 mm dayligth 600 mm usable table size 800 x 800 mm range L-W-H ca. 2,55 x 1,14 x 3,34 m weight ca. 3,5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Ledpfx Aex Sr Evsdveri Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Lredpfxsxwp Nye Advji Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, gebraucht WA0066 860 € Ljdpfeyukdbex Adveri 1 550 mm 220 mm mint condition divided