Used Hand Router for sale (9,330)

Condition: used, Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm Dcedpfjb Uhmtsx Afpjc -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Condition: used, Hand basin, wash basin, weld-in basin Dedpfx Afsb Uhm Sopscc -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

Condition: good (used), Spur gear pulley, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, hand trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley, under-flange trolley -Load capacity: 5000 kg -Hub travel: 4.0 m Dodpfx Afsfwg Hujpocc -Dimensions: 500/400/H800 mm -Weight: 165 kg

Condition: good (used), Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console Dcodpfxjhabldo Afpoc -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

Condition: good (used), Spur gear pulley, spur gear chain hoist, chain hoist, chain hoist with trolley, pulley -Load capacity: 500 kg Djdpfeb A Hc Hex Afpscc -Hook travel: 3000 mm -Max. beam width: 80 mm -Weight: 60 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump Dsdpowwqtpefx Afpscc -Manufacturer: Lukas, hydraulic pump hand pump two-stage pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H210 mm -Weight: 10.5 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Simplex, hydraulic pump hand pump two-stage pump -Type: P- unfortunately no exact type designation Dcedpfewwq Exex Afpjc -Pressure range: max. 10000 PSI 689 bar -Tank capacity: l -Quantity: 1x hand pump available -Dimensions: 740/200/H150 mm -Weight: 8.7 kg

Condition: excellent (used), Kitchen Worktop Router FG 314-2 - with top router HM /18 Scheer Dcjdpfx Afjx R Efgopec - Routing length: 900 mm - Routing depth: 0-90 mm - Complete with template - Weight: approx. 21 kg - 2000 Watts - 7 kg torque - 10,000 – 18,000 rpm

Condition: used, machine/vehicle number: 008319, X axis working area: 6380 mm Y axis working area: 1380 mm Working Table: Pod and Rail Djdpfx Aex A Tc Iefpocc Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of tool changer positions: 32

Condition: used, mileage: 6,57,067 km, power: 235 kW (319.51 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 9,170 kg, maximum load weight: 16,830 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, next inspection (TÜV): 02/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * German vehicle * 1st owner * Condition as per photos * BDF swap chassis suitable for 7.15 and 7.45 interchangeable containers * Adjustable underrun protection * Trailer hitch * Permissible trailer load: 18,000 kg * Duomatic coupling * Gross train weight: 44,000 kg * Air conditioning * Rear steering lift axle, raise/lower, steerable * Hill start assist Dedsxnqvvjpfx Afpecc * Adaptive cruise control * Automatic transmission * ESP + ASR + ABS * Snow centrifugal chains * Roof hatch * Air-suspended comfort seat with armrest * Seat heating * Multifunction steering wheel * Work lights * Radio + CD + navigation system * LED daytime running lights * Differential lock * Roof spoiler * Wheelbase: 4,800 mm + 1,400 mm * GVW: 26,000 kg * Unladen weight: 9,170 kg * Payload: 16,830 kg If you require a new TÜV inspection, we are happy to provide an offer from our partner workshops. Our offer generally does NOT include new TÜV inspection, DGUV certification, safety inspection, or accident prevention inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misunderstandings regarding condition and suitability on the buyer’s part. Viewings and inspections are possible at any time by prior arrangement and are expressly desired. All information is provided without guarantee. No liability is assumed for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: used, mileage: 65,623 km, power: 103 kW (140.04 HP), first registration: 09/2009, fuel type: diesel, empty load weight: 2,257 kg, maximum load weight: 1,243 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,450 mm, brakes: other, driver cabin: other, gearing type: mechanical, emission class: euro4, number of seats: 7, loading space length: 3,300 mm, loading space width: 2,200 mm, loading space height: 1,700 mm, Equipment: ABS, cabin, central locking, power assisted steering, trailer coupling, * German vehicle * 1st hand * Original Only 65,623 kilometers * Fully serviced checkbook * Flatbed tarpaulin * Double cab * 7 seater * Can be unloaded to 3,500 kg * Loading area 3.30 m x width 2.20 m x height 1.70 m * Aluminum loading flaps * 2x trailer coupling * Towing capacity 3,000 kg * Gross train weight 6,500 kg. * Bosal swap trailer coupling prepared * 6-speed manual gearbox * Stereo CD * Electric windows * Electric mirrors * Windshield heating * Rotating beacon * ESP * Central locking with remote control * Wheelbase 3,490 mm * GVW. 4,600 kg. * Unladen weight 2,257 kg. * Payload 2,343 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at Dedpfxjwlp E Te Afpjcc We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm Dcjdpfx Asg Sx R Rjfpjc round bar steel 13 mm weight of the machine ca. 50 kg dimensions of the machine ca. 800 x 500 x 1800 mm

Condition: used, mileage: 3,30,000 km, power: 368 kW (500.34 HP), first registration: 01/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Listing/Vehicle No.: MTG37SZM * Office: * WhatsApp: * Mobile: * Email: * Website: Rental of various trucks, tractor units, and trailers for short- or long-term hire, 7.5t from €699.00 and 18t from €1,xxx/month, available at short notice! Contact us for details. 1x Scania R500 Tractor Unit * Multiple units available * Year of manufacture: 2019 * Mileage: . km * Euro 6C with AdBlue * Retarder * Rain sensor * Multifunction steering wheel * Differential lock * Stationary air conditioning * Automatic climate control * Black velour seats * Refrigerator * Cab with 2 beds Dcjdeycn D Ijpfx Afpjc * Leaf/Air suspension * Tyres: 315/70 R22.5 front & rear axles * German vehicle * Accident-free * 1st owner * MOT/Safety Inspection NEW until 01/27 Net price – Trade-in possible – Rental/Financing/Leasing brokerage available – Subject to changes, prior sale, typographical errors, and mistakes! We deal exclusively in well-maintained German vehicles. Our Services: * All customs/export documents, Euro1 * Temporary plates / 5 days * Export plates / 30 days * Vehicle delivery * Vehicle collection * Main inspection and safety check Our contact details and opening hours: * Office: * WhatsApp: * Mobile: * Email: * Website: * Monday – Friday: 09:00 – 18:00 * Saturday: By appointment

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. Dodpfxjw U A N No Afpocc TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 275 kW (373.90 HP), fuel type: electric, color: yellow, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance Dcedpswxxvbsfx Afpec – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2018, condition: good (used), Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router Dcedefk Udqjpfx Afpec -Cisco: C881-K9 Ethernet Security Router -Dimensions: 250/320H45 mm -Weight: 2.4 kg

Condition: used, mileage: 7,458 km, power: 110 kW (149.56 HP), first registration: 08/2021, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 10/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M533----VW T6.1 2.0 TDI 3-WAY TIPPER----KM: 7,458 FULL SERVICE HISTORY ALL INSPECTIONS WERE CARRIED OUT AT A MANUFACTURER-AUTHORIZED WORKSHOP DIGITAL VEHICLE HISTORY AVAILABLE 1 OWNER----* BRAKE ASSIST * START/STOP SYSTEM * HILL START ASSIST * CROSSWIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) * CRUISE CONTROL * SPEED LIMITER * AUTOMATIC LIGHT CONTROL Dcsdpfx Afsx Ipnmjpoc ----AUTOMATIC TRANSMISSION----3-WAY TIPPER----SEAT HEATING----HEATED WINDSCREEN----GROSS VEHICLE WEIGHT: 3,000 KG----TOW BAR TRAILER LOAD: 2,500 KG----TIPPER BODY BY SCHOON----TIPPER DIMENSIONS: LENGTH: APPROX. 3.05 METERS WIDTH: APPROX. 2.00 METERS HEIGHT: APPROX. 0.40 METERS----FRONT PANEL GRILLE BY SCHOON----2X TOOLBOXES ON RIGHT AND LEFT BY SCHOON----* ELECTRIC WINDOWS * ELECTRIC / HEATED SIDE MIRRORS * AUTOMATICALLY DIMMING INTERIOR MIRROR * BLUETOOTH HANDS-FREE SYSTEM * USB * MINI SD CARD * SD CARD * 12V SOCKET * REAR WINDOW HEATER * DOUBLE PASSENGER SEAT WITH STORAGE COMPARTMENT ----Special Equipment: * 2nd Battery with Battery Monitoring * Lighting + Visibility Package * Comfort Package Plus * Convex Exterior Mirrors, Large Brackets * 17" Chassis * Vehicle Without Flatbed * Cruise Control System (includes Speed Limiter) * Illuminated Glove Compartment * Heated Rear Window * 80 Litre Fuel Tank * Heavy-Duty Suspension * Heated Driver and Passenger Seats * 7x17 Steel Wheels * Winter Package, Perm. Gross Weight 3.00 t Further Equipment: * Passenger Airbag Deactivation * Driver and Passenger Airbags * Traction Control (ASR) * Audio System Composition Audio (Radio, SD Interface, MP3 Function) * Electrically Adjustable & Heated Exterior Mirrors * Rubber Floor Mats in Cabin * Onboard Tools * Dual Headlights * Brake Assist System (HBA) * Multi Collision Brake Assistance System * Laminated Windscreen * 2 Foldable Remote Keys * Lockable Glove Compartment * Cabin Pollen Filter * Body/Build: Standard Platform * Headlight Range Control * Engine 2.0 Ltr. - 110 kW TDI * Non-Smoker Package * Digital Radio Reception (DAB+) * Wheelbase 3,400 mm * Tyre Repair Kit * Low Emissions per Euro 6d-TEMP * Passenger Double Seat with Lockable Storage in Seat Base * Adjustable Driver’s Seat * Engine Start/Stop System * Lashing Eyes in Load Area * Driver Seatbelt Warning System * Tinted Heat-Reflective Glazing * Central Locking with Remote and Interior Operation ----Upon request, we can retrofit a tow bar. Professional installation, fast and reliable, starting from €599. ++ Exclusive Promotion at Autohaus Mat GmbH: Up to €1,000 trade-in bonus – your advantage when changing vehicles! ++ Contact us directly via WhatsApp at: Why choose Autohaus Mat GmbH? 1. Attractive Trade-In: We handle the process quickly and fairly. With our trade-in bonus, you maximize your vehicle’s value and benefit when purchasing a new model. 2. Tailored Financing Solutions: Would you like to finance your new vehicle? We offer custom financing solutions adapted to your needs: * With or without down payment * Flexible

Condition: used, mileage: 2,78,951 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,000 kg, first registration: 12/2018, next inspection (TÜV): 05/2025, emission class: euro6, color: white, number of seats: 9, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M369 ---- VW T6 TRANSPORTER 2.0 TDI EURO 6 ---- KM: 278,951 SERVICE BOOKLET MAINTAINED ALL INSPECTIONS WERE CARRIED OUT IN A MANUFACTURER-AUTHORIZED WORKSHOP LAST INSPECTION WITH OIL CHANGE AT 272,961 KM ON 04/30/2024 VEHICLE HISTORY AVAILABLE IN DIGITAL FORM ---- 1ST OWNER ---- 4X AS NEW SUMMER TIRES ----* BRAKE ASSIST (HBA) * MULTI-COLLISION BRAKE (MULTI-COLLISION BRAKE) * CROSSWIND ASSIST * HILL START ASSIST * AIR CONDITIONING * START/STOP ----9 SEATS ----HEATED SEATS----SOFT-CLOSE REAR RIGHT SLIDING DOOR----* LONG VERSION * BLUETOOTH HANDS-FREE SYSTEM * VOICE CONTROL * WIFI * SD CARD * USB * AUX * ELECTRIC WINDOW REGULATOR * ELECTRIC EXTERIOR MIRROR + HEATED * FOLDING PASSENGER SEAT * PASSENGER SEAT STORAGE COMPARTMENT/SPACE * CENTRAL LOCKING WITH 2 REMOTE CONTROLS * 2X 12V SOCKETS * 2.0 L ENGINE * LOW EMISSIONS ACCORDING TO EURO 6 EMISSION STANDARD ----Optional equipment: * Discover Media audio navigation system (color touchscreen display) * Isofix mounts for child seat on rear seat * Car-Net mobile online services * Mobile phone interface and Wi-Fi hotspot * Multifunction display Plus * Smoker's package Dsdpfxsv Rvaco Afpecc * Seat package: 9-seater, 3-3-3 (driver's seat and passenger double seat, 2-seater bench seat and single seat, 3-seater bench seat) * Seats in driver's cab: Heated driver's seat * Seats in driver's cab: Height-adjustable driver's seat * Seats in driver's cab: Lumbar support in driver's seat * Seats in cargo/vehicle compartment: Passenger compartment preparation I * Trailer hitch preparation (socket and cable) * Permissible weight Gross vehicle weight 3.20 t (including 16" reinforced steel rims) * Right-hand sliding door closing aid Additional equipment: * Sliding door trim cover * Passenger airbag, deactivated * Driver/passenger side airbag * Aspherical exterior mirror, left * Electrically adjustable and heated exterior mirror * Convex exterior mirror, right * Cab floor covering: rubber * Headliner, cab comfort * EcoProfi * Driver assistance system: Brake Assist (HBA) * Driver assistance system: Multi-Collision Brake (Multi-Collision Brake) * Windows in cargo/vehicle compartment: - fixed, front and rear left * Windows in cargo/vehicle compartment: - fixed, front and rear right * Tinted laminated windshield * Lockable glove compartment * Tailgate with glass * Heated rear window * Interior filter: pollen filter * Dimmable interior mirror * Body/Construction: Station Wagon * Body variant: Standard roof * Child safety locks on the sliding doors * Fuel tank: 70 liters * Adjustable steering column (steering wheel) * Engine: 2.0 liters - 75 kW TDI * Wheelbase: 3400 mm * Tire repair kit * Tire pressure monitoring system * Low emissions according to Euro 6 emissions standard * Sliding door for the right-hand cargo/passenger compartment * Seat cover/upholstery: Fabric * Engine start/stop system * Front door storage compartment * Paneling in the cargo/engine compartment: Wood fiber * Heat-insulating glass ----+++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus? Your advantage when swapping vehicles! +++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you can maximize the value of your vehicle and benefit from purchasing a new model. 2. Customized financing solutions: Would you like to finance your new vehicle? We offer customized financing options, tailored to your needs:* With or

Condition: new, Year of construction: 2026, functionality: fully functional, Pros: • comprehensive processing (cutting, drilling, milling, engraving) • stable structure guaranteeing maximum precision and reliability • table with a vacuum system • free access to the machine enabling operation by one operator • the possibility of placing the entire palette of plates on the tray Dsdpfxour N A Nj Afpecc CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 150 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, The ATC series of plotters has been developed for professional use in large industrial plants and factories for the production of complex large-size components. Thanks to its special design, the machine is adapted to the production of casting models and yachts, among others, significantly reducing processing times. ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood Dcodpfxsiq U Tqj Afpoc - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 3000 x 6000 [mm] AXIS RANGE AND GATE CLEARANCE: Customised parameters DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 HSK cones. Additional tool magazine positions can be provided. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, Router CNC2030 ATC 4 axes, tilting spindle +/- 90 degrees working area 2100 x 3000 [mm] The ATC series of plotters was created for professional use in large industrial plants and factories. These machines are designed to process a wide range of materials. In order to meet the demands of heavier machining, the ATC machines feature an additionally reinforced construction and more powerful AC servo drives on each axis. A vacuum work table is standard on these machines. It is also possible to install a hybrid table. Plotters in this series are equipped as standard with automatic tool changing, a six-position linear magazine and a tool height sensor. The solutions used significantly speed up the machining process requiring the use of several cutters. Materials to be machined: wood wood-based materials (chipboard, MDF, OSB, etc.) plastics composites PVC non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The structure of the machine tool is made of steel and cast iron which gives it high rigidity, as well as resistance to the overloads associated with the machining process. WORKING SURFACE: The usable area of our machine tool is 2100 x 3000 [mm]. MATERIAL CLAMPING: The machine is equipped with a vacuum table. It is possible to install a hybrid or T-table. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 300 [mm] as standard (can be increased). DRIVES: SERVO motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes are driven using classic and proven helical rollers to ensure long service life and precision, while the Z axis is driven using a high-performance ball screw. All axes move on rail guides.... SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. The power supply is provided by an inverter, which has more power than the spindle, which protects against speed drops when operating under heavy load. TOOL STORAGE: The machine tool comes standard with a linear tool magazine equipped with 6 ISO30 cones. Dcjdpfx Afsirfavjpsc SOFTWARE: The machine has been supplied with the appropriate CAD/CAM software in its latest version. The software makes it possible to design parts quickly and easily, which the programme then converts into so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is controlled by a controller, which has its own processor and operating memory to ensure stable and reliable operation. The machine controller is equipped with active vector analysis functions, so that operation of the machine is smooth and there is little overshoot during processing. The controller has a recovery function to continue operation after a power loss, so there is no need to initialise the programme from scratch. The controller's on-board memory allows the machine to work without having to load the programme each time.

Condition: new, Year of construction: 2026, 1525 ATC milling ploter THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 1525 ATC milling plotter is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Dcodpfxjin Eyve Afpec WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Dodpfx Asin Eztjfpocc - any size of the working table

Condition: new, Year of construction: 2026, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Dedpein Uilsfx Afpjcc CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2026, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. Dcsdpfsin Eu Hjx Afpoc SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table