Used High Speed Punch Press for sale (63,481)

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A voltage 24 V Tjdjwg Hunopfx Ac Nsf weight of the machine ca. 3,5 t

Condition: used, Comprehensively tested and refurbished, Used Winkworth model RT200 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Material: Stainless Steel Capacity: Approximately 200 Litre Capacity Mixing chamber: Approximately 1,000mm x 650mm Diameter Discharge Type: Centre Bottom with Discharge Valve Type Of Mixer: T-Arm Blades Motor: 11kW SEW Geared Motor Also includes: Stainless Steel Side Entry Chopper Driven by 4kW Motor. Tote lifter (Max 150 kg) and 2 off stainless steel totes. Click on the link below to see a video of the machine in operation. Specifications: Bowl Volume: 52.8 gal Motor Power: 14.8 hp Tsdpfxsxt Egtj Ac Nof Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 5.362 HP Of Unit: 14.751 Weight: 150 Dimensions: 1000mm x 650mm Diameter

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. Tsdpsnygvrsfx Ac Nsf The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Tedpfx Aexpfhvsc Nef Coolant system Documentation

Condition: used, Year of construction: 2019, High-speed milling machine OPS Ingersoll HighSpeed EAGLE V9, year 2019, featuring excellent equipment and an extensive range of accessories for sale. - Dynamic 5-axis high-speed milling machine with Heidenhain TNC 640, HSK50 spindle (Step-Tec) with up to 36,000 rpm - Excellent condition, currently only about 10,000 operating hours - Special features such as wet milling option for graphite electrodes (coolant filtration system) and pre-installation for automation with pallet changer Tedsxu U Uvopfx Ac Nof - Extensive accessories including shrink fit machine (HAIMER), screw compressor (Atlas Copco), EROWA pallet UPC 320, T-slot table 520 x 520 mm, LANG clamping systems, shrink fit chucks, tools, workshop equipment, and workbenches (see accessories list)

Condition: excellent (used), Year of construction: 1979, The machine is in very good condition, equipped with a digital display, and immediately available. Radial drilling machine Maximum height: 2,800 mm Maximum radius: 3,500 mm Spindle: 130 mm Maximum drilling diameter: 72 mm Tedpfjxq Rzqox Ac Nsf Table: 6,500 x 4,000 mm

Condition: refurbished (used), Refurbished DKV III through-feed press with brake unit Optionally with original hydraulic motors or conversion to servo motors Options: - Chain threading - Traveling cross-cut saw Function: For pressing finger joints without stopping (in through-feed). Tsdpfx Asv T Aqyoc Nsf The upper and lower plate chains generate feed force. Downstream brake plates transmit the required longitudinal pressing force to the wood through friction. Advantages: - High performance despite relatively slow feed rate - Absolutely no vertical tine offset of the finger joints Technology: Heavy 2" plate chain, pneumatically raised and lowered Floating brake elements Pressing force measurement via contact pressure gauge Electric height adjustment Maximum pressing force adjustable and dependent on feed speed and wood cross-section: 4500 daN at 32 m/min 2200 daN at 70 m/min Adjustable feed speed: 10-70 m/min Drive power: Feed unit adjustment: 1 kW Brake adjustment: 1 kW Hydraulic motors: 45 kW Technical specifications: Log width: 90 - 180 mm Log thickness: 20 - 80 mm Thickness to width ratio: 6:10 Maximum wood cross-section with 15/16.5 mm tines: 90 cm²

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function Tedpfx Asunh D Djc Nef - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Spindle taper HSK A50 Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tedowwundopfx Ac Nsf Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Todpfx Aoxpfglsc Njf Tapping device Coolant system Documentation

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Tedpfx Acexiy A Us Nef Control INGERSOLL ANDRONIC

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Todpfx Acoxhmtwj Nsf Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: good (used), Year of construction: 1993, machine/vehicle number: 1117-C, Offer 25330 Technical data: - Drilling capacity in steel ST 60: 50 mm - Drilling ability in steel ST 60: 55 mm - Drill spindle taper: MK 4 - Drill spindle stroke: 230 mm - 9 spindle speeds: 54 - 1032 rpm - 4 feeds: 0.1 - 0.4 mm/rev - Throat depth: 370 mm - Max. distance table – drill spindle: 650 mm - Max. distance machined base plate – drill spindle: 1140 mm - Table with 2 T-slots: 650 x 550 mm - Table height adjustment via rack and pinion with handwheel - Table tiltable to left and right - Drive: 400 V / 3.0 kW - Space requirement approx.: W 700 x H 2400 x D 1000 mm - Weight approx.: 700 kg Tsdpfxexr A Sqs Ac Nef - Including: reversible operation (right/left), lighting

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2020 mm Measurements depth 2800 mm Measurements height 2450 mm Machine weight 7200 kg Control Unit Brand HEIDENHAIN Model iTNC 640 HSCI Main Drive Spindle speed range 1–42000 Tool taper Fisher HSK E40 Number of axis 5 Movement X-Axis Movement 550 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 400 mm Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece weight 500 kg Table Number of tslots 5 Table load 250 kg Tools Max tool diameter 16 mm Additional Equipment 4/5-axis Tilting Rotary Table prepared for Pallet System B-axis Tilting Range: −120° to +60° C-axis Rotation: 360° B-axis Speed: 25 rpm C-axis Speed: 20 rpm Keller Dust Extraction System EROWA UPC Production Chuck Clamping System Tool Length and Diameter Laser Measurement, Broken Tool Detection Touch Probe (Renishaw) Precision Pack III – 5-axis Thermal Compensation This 5-axis OPS INGERSOLL Eagle V5 was manufactured in 2017, featuring a robust vertical machining center design. It boasts a high-speed Fisher HSK E40 spindle with speeds up to 42,000 rpm and a 32-tool magazine. The machine includes a 4/5-axis tilting rotary table, enhancing its versatility for complex machining tasks. Consider the opportunity to buy this OPS INGERSOLL Eagle V5 vertical machining center. Contact us for more information about this machine. Tjdexcb Ncjpfx Ac Nsf Application Types Milling

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Tedpfsxq Exwsx Ac Nef

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped Tedsxn A Spepfx Ac Njf - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: used, Year of construction: 2010, x-travel 620 mm y-travel 570 mm Todpfx Acexfwg Aj Njf z-travel 350 mm Control Heidenhain iTNC530

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,000 h, laser power: 2,000 W, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, workpiece weight (max.): 120 kg, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder Todpew Au Eaefx Ac Nef + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: - Robust C-frame - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Condition: good (used), Machines pictures 1 to 9 Tedpfx Aou Nm Nisc Njf Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 6212 mm Measurements depth 5436 mm Measurements height 2342 mm Machine weight 21500 kg Main Drive Number of axis 4 Todpsxaqmrefx Ac Nef Movement X-Axis Movement 3050 mm Y-Axis Movement 1525 mm Z-Axis Movement 37 mm Turret Number of turrets 1 Additional Equipment Air-blow oil-mist lubrication Slug-vacuum system Digital tool ID / barcode system Integrated tapping: inch/metric taps (M2.5–M8) Marking & deburring tools: on-board marking and deburring options This 4-axis AMADA EMZ3612M2 was manufactured in 2016, featuring a high-speed servo-electric turret punch press with twin AC servo direct drive. It boasts a 33-ton press capacity and an AMNC-F / AMNC-4ie CNC system for enhanced control. The machine handles sheet formats up to 3050x1525 mm and includes a "King" turret with up to 58 stations. Energy efficiency is optimized with AC servo drives. If you are looking to get high-quality punching capabilities consider the AMADA EMZ3612M2 machine we have for sale. Contact us for more information. Application Types Punching

Condition: excellent (used), Year of construction: 2000, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Tsdpfx Aextu Nwoc Nof Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Additional extras with the machine: Cabinet full of tooling Todshtfp Tspfx Ac Nof Multitool Multiset – tool setter Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 17000 kg Main Drive Tjdpfx Aexf N Skoc Nof Number of axis 2 Max Material Thickness Steel 6 mm Stainless steel 3 mm Aluminium 6 mm This Nisshinbo HIQ-1250 was manufactured in 1999. It is a turret punch press with a working range of 2500 x 1250 mm, handling sheet thickness up to 6 mm for steel and aluminium, and 3 mm for stainless steel. It features a pressing capacity of 22 tons and a ram stroke of 50 mm. If you are looking to get high quality punching capabilities consider the Nisshinbo HIQ-1250 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale A late Trumpf 500 just before the 5000r Tjdpfeh Nf Upjx Ac Njf 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: · Capable of taking multi tool a good selection of tooling available along with multi tools

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale Tedpong Al Aofx Ac Njf 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Good condition and can be seen working in production Complete with: