Used Holzma Hpp 250 for sale (73)

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Motor power, scoring saw: 2.2 kW Blsdoz Eklvepfx Af Aon MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Clamping system, clamping jaws: 10 EQUIPMENT Lift table Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,539 h, This HOLZMA HCL 11/56/22 was manufactured in 2001. It features a maximum panel size of 5600 × 2200 mm and a cutting length of 5600 mm for longitudinal sawing. The saw blade projects up to 125 mm, and it includes a turning station sized 1250 × 1250 mm. With a lifting capacity of 10 tons and a maximum lifting height of 1430 mm, consider the opportunity to buy this HOLZMA HCL 11/56/22 panel saw. Contact us for more information. • Total connected load: 88 kW • Voltage: 400 V / 50 Hz / 3~ + N • Current: 159–160 A • Control voltage: 24 V • Cutting capacities: • Maximum panel size: 5600 × 2200 mm • Minimum panel size: 2440 × 1220 mm • Cutting length (longitudinal saw): 5600 mm • Cross saw: 2200 mm • Saw blade projection: 125 mm • Pneumatic and extraction requirements: • Required air pressure: 6 bar • Air consumption: 250–300 l/min • Dust extraction volume: 10,000 m³/h • Air speed: 26 m/s • Installation / floor requirements: • Concrete quality: B25 • Minimum concrete thickness: 200 mm • Floor level tolerance: ±10 mm • Working height: approx. 485–520 mm Bodpfjzug S Hjx Af Ajln • Extraction connections: Ø 320 mm (main) + Ø 150 mm + Ø 80 mm • Operating hours (from counters): • Counter 1: 23,610.8 h • Counter 2: 22,539.7 h Additional equipment • Lift table: • Maximum panel size: 5600 × 2200 mm • Stack height without pit: 550 mm • Stack height with pit: 1430 mm • Maximum lifting height: 1430 mm • Lifting capacity: 10 t • Turning station: • Dimensions: 1250 × 1250 mm

Condition: excellent (used), YZ0105) PANEL SAW WITHOUT REAR LIFTING TABLE Mod. HPP 300/56/56 PROFILINE Numerical Control Power Control POWER TOUCH. Software CADmatic 4 - Professional Rear pushers (N.) 1 - (PACK PREMIUM). With No. 11 clamps / grippers (1 x Power Concept) Max. cutting width (mm) 5600. Useful stroke of the pushing system (mm) 5600 Max. blade projection (mm) 80 Scoring Unit (max. diameter saw / power) mm 180 / Kw 1,5 Main Sawing Unit (max. diameter saw / power) mm 350 / Kw 11 (option Kw 18) Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system (mm 500 x 2810) Labels Printer: PICA II 108 YZ0106) AUTOMATIC REAR STORAGE SYSTEM for PANELS Mod. TFL 211/10/05 Total Space Required (with panel saw) mm 10640 x mm 55660 Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 110 m/min moving carriage speed (on Y axis) 130 m/min vacuum suction cup group speed (mobile in Z axis) 70 m/min Vacuum suction cup group, 90° rotating Bjdjfg Ewzopfx Af Aeln Automatic management system TLF (by scanner) of the cut panels (but remaining in the warehouse) minimum dimensions mm 800 x mm 2000 Stack dimensions Min mm 2600 x mm 800 / Max mm 5600 x mm 2200 Stack height: mm 1000

Condition: used, Year of construction: 2024, machine/vehicle number: 0-341-87-0182, operating hours: 1,354 h, total length: 6,080 mm, total width: 4,950 mm, total height: 1,940 mm, Used panel saw, available for inspection while in operation. ▪️Labeling software ▪️Manual label printer ▪️Stress-free cutting/ripping program (cutting cycles, stress elimination, reduced waste) ▪️tapio ready Bedpfozu Nytjx Af Asln Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Weight: 7.200 kg Price: On request Bedjx R A Ufjpfx Af Ajln - Year: 2016 - Documentation available: No - CE certificate present: No - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2001, Max. panel size: 5600 x 2700 mm Saw motor: 18 kW Installation dimensions: 8539 x 13190 mm Max. panel thickness: 40 mm Max. stroke thickness: 110 mm Blodszzpg Hjpfx Af Aen

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Bedpfx Aozilz Nof Ajln Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: used, Year of construction: 2011, Cross-cut and rip saw Manufacturer: HOLZMA Type: HQP 11/16/56/LX Year of manufacture: 2011 Technical data - Combined saw unit with cross-cut saw unit, cutting length 1,600 mm, and rip saw, cutting length 5,600 mm - additional pressure cylinder - postforming unit - waste flap 1600 mm - clamping device for cross-cut saw, 2-finger - automatic ejector guide - roller conveyor designed for 1,300 mm width - second drive in the roller conveyor - 1 m shaking chute 550 mm (driven) - mobile CADMATIC control panel - cooling unit for individual saw Bjdpjzuyzzefx Af Aoln - with vacuum loading system and outfeed table Note: The technical data and descriptions are a copy of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-240-06-8502, functionality: fully functional, power: 18 kW (24.47 HP), cutting height (max.): 95 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, plate width: 2,200 mm, TECHNICAL DETAILS Cutting length: 4,300 mm Panel width: 2,200 mm Saw blade overhang: 95 mm Main saw blade diameter: max. Ø 380 mm Bledpfx Aszx Anxjf Ajn Saw carriage feed rate: up to 150 m/min Clamping jaws: 7 pieces MACHINE DETAILS Main saw motor power: 18 kW Scoring saw motor power: 2.2 kW Operating hours: approx. 38,544 h (as of 05.10.2023) EQUIPMENT Automatic rear panel loading system Lift table loading system Lift table Automatic program slider with clamping jaw feed Main saw unit Scoring unit Automatic cutting length and positioning control Angle and back stop Air cushion support tables in the operator area CADmatic operating and optimization environment PICA 108 label printer Roller and transport technology in the rear loading area Safety enclosure with protective fencing Dust extraction connections with machine-side dust extraction ducting

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Bljdpoz Erw Hofx Af Aen Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift cut size: 4,300 mm x 2,200 mm Panel size for lift table feed, max.: 4,300 mm x 2,200 mm Panel size for lift table feed, min.: 1,200 mm x 400 mm Stack Heights Stack height of lift table, floor-level installation, max.: 560 mm Stack height of lift table, pit installation, max.: 780 mm Bledpfx Aex Nf Eqsf Ajn Lift table load capacity, max.: 4 t Roller Rails Roller rail element, 10-track: 1 pc Roller rail element, 2-track: 6 pcs Clamps Spacing: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Extraction device position: 2,375 mm Air cushion table with rollers, 2,160 x 800 mm: 1 pc Air cushion table with rollers, 2,160 x 650 mm: 3 pcs Central blower: 1 pc Air cushion table nozzle pipe: 70 x 70 mm

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Bledpfx Aezkb T Djf Aon Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) Bjdsx Aqdcjpfx Af Aeln No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Year of construction: 2004, condition: used, Stacking platform for panel dividing saws Manufacturer: Holzma Bodpfxezu Am Ts Af Aeln 2x Type: HAU A/B 25/8 2x Type: HAU A/B 25/12 Year of manufacture: 2004

Condition: used, Year of construction: 2011, Panel dividing saw Manufacturer: Holzma Type: HPL 380 Year of manufacture: 2011 Technical data Cutting length: 4,300 mm Bledpfx Asz Akcxjf Ajn Cutting/lifting table width: 2,200 mm Max. panel size: approx. 4,300 - 2,200 mm Min. panel thickness: 9.5 mm Saw blade overhang: 95 mm Max. saw blade diameter: 380 mm Main saw motor: 13.5 kW Scoring motor: 2.2 kW Scorer Saw carriage feed rate: 1,150 m/min Program slider: up to 90 m/min Clamping jaws: 7 pieces Lifting table payload: up to approx. 4,000 kg Control system: HOLZMA CADMATIC 4.0 Total connection: approx. 28.7 kW Working height: approx. 920 mm Lifting table: 4-column lifting table Loading: from the rear Air cushion tables: depending on the configuration CE Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Bledpfx Aeymx S Dsf Asn Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: used, Year of construction: 2010, power: 30 kW (40.79 HP), cutting width (max.): 3,800 mm, controller model: POWERCONTROL, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 3,800 mm Max. panel length: 2,200 mm Min. cutting height: 6 mm Max. saw blade overhang: 130 mm Number of tables: 3 Number of grippers: 7 Gripper arrangement: On the sliding stop Max. feed rate: 90 m/min Sawing unit Number of saw carriages: 1 Positioning: NC-controlled Max. tool diameter: 480 mm Bodpfx Afszmtnlj Aeln Motor power: 18 kW Scoring unit Positioning: NC-controlled Max. tool diameter: 200 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Machine programming software: CADMATIC 4 Total connected load: 30 kW EQUIPMENT CE marking Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7875

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system Bedpezxgf Ujfx Af Aoln

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization Bjdpfxjyw Ivhs Af Aoln - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: excellent (used), Holzma B14/4 drilling machine in excellent condition. Ready for operation. Video of the machine in operation available. Bjdsxyxgtopfx Af Aoln

Condition: excellent (used), Panel Beam Saw - With rear lifting table Numerical Control POWER CONTROL Software CADmatic 4 Professional Outside Rollers table for pre-loading (mm 5600 x 2200) Lifting scissor table (mm) 5600 x 2200 Rear pusher with 13 clamps / grippers (1 x Power Concept / Twin Pusher) With clamps / grippers - RETENTION DEVICE FOR THIN PANELS (Minimum thickness 3 mm) Turning device (rotating unit) at 90° Max. cutting width (mm) 5600 - Useful stroke of the pushing system (mm) 5600 Max blade projection (mm) 130 Scoring Unit (max saw diameter / power) mm 200 / Kw 2,2 Main Sawing Unit (max saw diameter / power) mm 480 / Kw 30 Adjustable speed of the saw carriage (m/min) 1 - 150 N° 5 Front supporting tables with Air blowing system Blodpfx Ajzl S Nfof Asn OPTION: Printer for labels - PICA

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Bjdpjyuya Eofx Af Asln Year of manufacture: 2016

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 0-241-06-5232, functionality: fully functional, operating hours: 12,608 h, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, cutting length (max.): 4,300 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. Bljdpfjxfvp Aox Af Aon The machine will be available from 02/03/2026.

Condition: ready for operation (used), Year of construction: 1999, total width: 8,500 mm, total height: 2,500 mm, product length (max.): 26,000 mm, Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Phase / Wiring: 3 ~ + N- Current (Amperage): 80 A- Control Voltage: 24 V- Included Equipment: Equipped with lifting tables and Liftomat- Loading Capacity: 3 stockyards with 25 panels each- Maximum Panel Dimension: 2,100 x 4,100 mm- Capacity: Up to 6 panels can be cut simultaneously- Discharging Table: Automatically height-adjustable clearing table- Special Features: Cut layout optimization for maximum material utilization and low waste Bodpfx Afszuhcys Ajln

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Blodpfx Afet H Tynj Ajn Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg