Used Horizontal Band for sale (9,960)

Condition: new, cutting diameter 240 mm dimensions of saw-band 2730 x 27 x 0,9 mm table height 920 mm cutting speed 35 + 70 m/min 240 mm stroke back stop 230 mm Fsdpod Iip Ssfx Aptogg cross-slide 270x230 210 Impact energy 200 Air consume per blow 200x210 130 mm 130 mm 130x160 mm total power requirement 1,2 kW weight of the machine ca. 0,26 t dimensions of the machine ca. 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, continuously adjustable feed, with limit switch at the end of the cut. Rapid lowering of the saw frame from the rest position to the workpiece, then toggle to normal saw feed (e.g. for scribing). Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for notching). Through the brake cylinder the saw can be positioned in any position during the return stroke.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will Fgodefg E Hpjpfx Apteg driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, neu ca. 4 Monate ab Auftragse Fodpfewiq Dfjx Aptjgg Türkei 50900 € 962.01 € Doppelsäulenführung 5750 x 41 x 1,3 mm 20 - 120 m/min 420 mm 420 mm 420 x 420 mm 805 mm 1.1 kW 5.5 kW 1 kW 0.12 kW 2860 mm 1980 mm 2100 mm 3700 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple feeds) Omron touchscreen, 50 different cutting lengths and 30 programs can be saved Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Sensitive pressure Inverter for stepless blade speed Chip brush Optical height adjustment Chip conveyor Operating instructions in GERMAN or ENGLISH

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm Fjdpofgyh Rjfx Aptogg 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 25 - 90 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! (20347) Double miter metal band saw with: - Belt speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Fjdpfsu Sg A Usx Aptegg Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Main engine: 15 kW Electric lifting up / down Smooth feedrate control Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Hydraulics: Hydraulically raised retaining arms loading of the log leveling holdfast chain rotator leveling with hydraulic drive hydraulic aggregate 5.5kW

Condition: new, Cutting capacity, round, 0°: 127 mm Cutting capacity, flat, 0°: 125 x 130 mm Cutting capacity, round, 45° right: 90 mm Cutting capacity, square, 45° right: 90 x 90 mm Cutting capacity, round, 60° right: 45 mm Cutting capacity, square, 60° right: 45 x 45 mm Vise opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor power: 0.55 kW Voltage: 230 V Weight, approx.: 25 kg Fgedpfx Apjilk Ekoteg Features: - Saw frame swivels up to 60° - Ideal for cutting pipes, profile materials, and solid materials made of stainless steel, iron, etc. - Sturdy saw arm for vibration-free operation - Low noise due to robust design - Automatic shut-off after cutting is complete via a micro-limit switch - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw blade guide for optimal cutting results - Environmentally friendly, as the use of lubricants and coolants is eliminated - Ideal for use on construction sites due to its low weight - Base frame available as an option (not included in the scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at an extra cost: 129 euros net (special price)

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 11070 € 212.54 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 280 mm 240 mm 420x200 mm rund 260 mm, quadrat 240 rund 170 mm, quadrat 160 rund 200 mm, quadrat 180 830 mm Fgsdsynmqwjpfx Aptog 1600 mm 1400 mm 1800 mm 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: new, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm capacity 90 degrees: square 1600 X 1600 mm Fgsdpfxoymf N Ae Aptsg capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size.

Condition: new, cutting diameter 550 mm saw band length 6850 x 41 mm cutting width 1,3 mm Control Halbautomatisch Cutting area - square 550 x 550 mm Cutting area - flat 550 x 700 mm total power requirement 4 kW / 1580 Nm kW weight of the machine ca. 3775 kg dimensions of the machine ca. 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications Fgedpfoymf S Dex Aptog - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 650 mm Fgjdpfx Ajyk Ih Ajpteg saw band length 7730 x 54 mm cutting width 1,3 mm Control halbautomatisch Cutting area - square 650 x 650 Cutting area - flat 650 x 750 total power requirement 5,5 kW / 750 Nm weight of the machine ca. 4550 kg dimensions of the machine ca. 2100 x 1550 x 3900 mm The KSY 650 x 1050 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 3000314904, functionality: fully functional, operating hours: 5 h, power: 2.4 kW (3.26 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 320 mm, control type: PLC-controlled, roller diameter: 300 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 100 rpm, rotational speed (min.): 15 rpm, total height: 1,500 mm, total length: 2,050 mm, total width: 1,170 mm, overall weight: 650 kg, table height: 800 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, PEGAS-GONDA 300x320 SHI-LR-CZ – Demonstration Bandsaw, Year 2025 We offer for sale a PEGAS-GONDA 300x320 SHI-LR-CZ semi-automatic metal bandsaw, manufactured in 2025. The machine is offered directly by the manufacturer PEGAS-GONDA and has been used as a demonstration machine in our showroom. This is the special -CZ version, featuring a more robust saw arm design compared to the standard version. The saw arm is made from a closed-section profile, and the band wheel bearings are mounted in grey cast iron housings. This design provides increased rigidity and stability of the saw arm. In addition, the machine is equipped with a digital display showing the current cutting angle directly on the control panel, making precise angle setting easier and faster. The standard 300x320 SHI-LR, without the digital cutting-angle display, is listed in our official price list at EUR 12,020. Take advantage of this unique showroom offer at only EUR 6,100 for the demonstration machine, which also comes in the more robust -CZ version. Main Features semi-automatic hydraulic metal bandsaw robust SHI-LR-CZ design year of manufacture: 2025 demonstration machine from the manufacturer's showroom hydraulic material clamping hydraulically controlled saw arm movement continuously variable blade speed via frequency converter continuously adjustable mitre cutting from 0° to +60° right and from 0° to -45° left digital cutting angle display cast iron rotary table automatically adjustable upper saw arm position coolant system automatic indication of correct blade tension Cutting Capacities At 0° round material: Ø 300 mm rectangular section: 320 × 290 mm At +45° round material: Ø 300 mm rectangular section: 300 × 280 mm At +60° round material: Ø 200 mm rectangular section: 190 × 200 mm At -45° round material: Ø 270 mm rectangular section: 270 × 200 mm Technical Data saw blade motor power: 2.4 kW power supply: 3 × 400 V blade speed: 20–100 m/min, continuously variable saw blade dimensions: 3660 × 27 × 0.9 mm working height: 800 mm machine dimensions: approx. 2050 × 1170 × 1420–2040 mm machine weight: approx. 650 kg Semi-Automatic Working Cycle After the material is positioned and the cycle is started, the machine hydraulically clamps the workpiece. The saw arm moves rapidly towards the material and then automatically switches to the preset cutting feed. After completion of the cut, the saw arm automatically returns to the preset upper position. Between individual cuts, the operator only needs to reposition the material. The machine can be inspected and tested directly at PEGAS-GONDA, the manufacturer. Manufacturer: PEGAS-GONDA Model: 300x320 SHI-LR-CZ Year of manufacture: 2025 Condition: Demonstration machine / showroom machine Fjdpjzy Ndiofx Aptjgg

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm Fjdpfxsfgyh Ts Aptsgg table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min Fjdpfofg E H Nox Aptegg total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, Year of construction: 2026, neu 2026 060216 prompt, Zwischenverkauf v Türkei Fgodpfxowiqtyo Aptog 20700 € 397.44 € 1 Schwenkrahmen 5200x34x1,1 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 410 mm, quadrat 410 rund 320 mm, quadrat 250 rund 410 mm, quadrat 410 rund 320 mm, quadrat 285 860 mm 0.55 kW 3 kW 0.12 kW 2800 mm 1210 mm 1870 mm 1540 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH OPTIONS: Roller tables and band saw blades on request

Condition: new, Year of construction: 2025, cutting diameter 650 mm saw band length 8200 x 54 mm cutting width 1,6 mm Capacity 90° - rectangle 650 x 850 mm Capacity 90° - square 650 x 650 mm total power requirement 5,5 kW / 2775 Nm weight of the machine ca. 6400 kg dimensions of the machine ca. 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor Fedsyk Ikqepfx Aptjgg - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 9080 € 175.24 € Schwenkrahmen 3270x27x0,9 mm 35/70 m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 Fgjdpfeynm Szsx Aptog rund 170 mm, quadrat 170 830 mm 1600 mm 1400 mm 1950 mm 356 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 140 mm, cutting width (max.): 650 mm, control type: manual, actuation type: electric, total height: 1,800 mm, total length: 2,820 mm, total width: 2,550 mm, Equipment: CE marking, documentation/manual, motor brake, For sale is a professional HEMA HTR 600 horizontal bandsaw, manufactured in 2004. The machine comes from the original owner, a bookbinding company, and was used there exclusively for the precise cutting of copper plates. Accordingly, it is in very good and well-maintained condition. Thanks to the integrated conveyor belt, the HEMA HTR 600 is ideally suited for continuous operation and precise cutting of various materials. Technical data: Manufacturer: HEMA Model: HTR 600 Year of manufacture: 2004 Wheel diameter: 600 mm Max. cutting height: 140 mm (distance between conveyor belt and saw blade) Conveyor belt width: 650 mm Conveyor belt speed: 0.5 to 5 m/min (continuously variable) Fgodpfx Aezqak Ueptsg Cutting speed: 1,640 m/min Saw blade dimensions: Length max. 5,600 mm | Width 8 to 25 mm | Thickness max. 0.65 mm Dust extraction connections: 3x Ø 100 mm (cutting point, deflection point, conveyor belt) Saw motor power: 2.2 kW Feed motor power: 0.12 kW Electrical connection: 400 V / 3 phase / 25 A fuse Working height: 955 mm Dimensions (L x W x H): approx. 2,820 mm x 2,550 mm x 1,800 mm Weight: approx. 700 kg Condition & Notes: Previous application: Bookbinding (copper processing) The machine is fully functional and ready for immediate use. Self-collection or shipping via freight forwarder is possible (costs are borne by the buyer). If you are interested or have any questions, please do not hesitate to contact us!

Condition: new, Bernardo Horizontal Bandsaw HBS 275 - 400 V Technical Specifications Cutting capacity, round, 90°: 225 mm Cutting capacity, square, 90°: 200 x 200 mm Cutting capacity, rectangular, 90°: 245 x 150 mm Cutting capacity, round, 45°: 160 mm Cutting capacity, square, 45°: 160 x 160 mm Cutting capacity, round, 60°: 100 mm Cutting capacity, square, 60°: 100 x 100 mm Working height: 910 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting speeds, 400 V: 45 / 90 m/min Coolant pump, S1 100%: 100 W Motor output, S1 100%: 1.1 kW Motor input, S6 40%: 1.5 kW Voltage: 400 V Machine dimensions (L x W x H): 1430 x 720 x 1700 mm Weight, approx.: 190 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for belt tension • Vise with quick-release mechanism • Coolant system Fedpfxod Du T Io Aptogg • Hydraulic lowering cylinder • Motor protection switch • Automatic end-of-cut shut-off

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 14200 € 272.64 € Schwenkrahmen 4160x34x1,1 mm 20-100 m/min 320 mm 320 mm 610x320 mm rund 260 mm, quadrat 225 rund 320 mm, quadrat 320 Fgodpfx Apjynm Ntjtsg rund 320 mm, quadrat 320 740 mm 0.37 kW 2.2 kW 0.12 kW 2100 mm 1200 mm 1350 mm 1150 kg rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 10370 € 199.1 € Schwenkrahmen 3120 mm 35/70 m/min 280 mm 240 mm 350x140 mm rund 230 mm, quadrat 200 Fgjdpfx Apsynmq Dsteg rund 150 mm, quadrat 130 rund 200 mm, quadrat 170 830 mm 1550 mm 1400 mm 1750 mm 420 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment digital readout for mitre cuts

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 345, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, total height: 1,350 mm, total length: 1,600 mm, total width: 1,460 mm, overall weight: 460 kg, The Ergonomic 290.250 GAE is an automatic band saw with a smooth arm feed, allowing for cutting materials with a diameter of 5 to 250 mm. Fsdpezypn Uefx Aptegg Where is the Ergonomic 290.250 GAE best suited? - on construction sites; - in locksmith workshops; - in production halls; - wherever precision and accuracy are important; - for cutting metals. How does the Ergonomic 290.250 GAE compare to the competition? - hydraulic arm lifting and lowering; - hydraulic vise; - cutting to the right at angles of 0° – 45° – 60°; - smooth arm feed; - ability to program different lengths and quantities of cut pieces in a single program; - ADFR system; - built-in cooling system to protect against overheating; - bimetallic band saw blade; - brush for thoroughly cleaning the blade of chips; - ability to memorize the arm position; - clear LCD display. The machine is in fully working condition; we invite you to inspect it. Transportation is the buyer's responsibility.

Condition: used, Year of construction: 2009, type of input current: three-phase, total height: 2,150 mm, total length: 2,710 mm, total width: 1,200 mm, overall weight: 2,300 kg, cutting range round steel at 90°: 360 mm, feed length X-axis: 2,600 mm, opening width: 400 mm, saw band length: 5,730 mm, saw band width: 34 mm, saw drive: 3,000 W, working height: 720 mm, For sale is a fully automatic horizontal metal bandsaw from the manufacturer Kaltenbach, model KBS 400 DG-NA, manufactured in 2009. The machine is suitable for sawing steel, cast iron, non-ferrous metals, as well as pipes, profiles, and solid material. The automatic material feed and hydraulic workpiece clamping enable efficient and precise series production. The cutting speed and hydraulic saw feed are continuously adjustable. Miter cuts are also possible. Technical data: Manufacturer: Kaltenbach Model: KBS 400 DG-NA Year of manufacture: 2009 Machine number: 305285 Cutting range, round, at 90°: 360 mm Cutting range at 90°: 400 × 350 mm Cutting range at 45°: 280 × 350 mm Saw band dimensions: 5,730 × 34 × 1.1 mm Cutting speed: 15 to 90 m/min Working feed: continuously adjustable up to 400 mm/min Feed length per single stroke: 2,600 mm Saw drive: 3 kW Working height: 720 mm Dimensions: approx. 2,710 × 1,200 × 2,150 mm Fedpfx Apozmf Uqjtsgg Weight: approx. 2,300 kg

Condition: used, Year of construction: 1978, cutting diameter 260 mm capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 x 400 mm cutting speed 20 - 80 m/min Control konventionell Fgedpfx Asygxzxsptjg total power requirement 2,0 kW Dimensions (LxWxH) 2,0 x 1,4 x 1,2 m Horizontal band saw, semi-automatic

Condition: used, cutting diameter 360 mm saw band length 0 mm cutting width 0 mm cutting speed 0 m/min total power requirement 1,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 2,2 x 2,05 x 1,5 m Horizontal Bandsaw - Max. Miter Angle: 45° - Coolant System Fjdszafktspfx Aptegg - Emergency Stop - 1300 mm Infeed Roller Conveyor - 2 Spare Saw Blades

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 + 70 m/min total power requirement 1,1 / 1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m ATTENTION SPECIAL PRICE!!! Double miter metal band saw with: Fgedpfjd Iip Njx Aptsg - Belt speed 35 + 70 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table for quick miter adjustment - Quick-action clamping stick can be moved - Quick release lever - Automatic cooling