Used Horizontal Bending Press for sale (20,034)

Condition: new, Horizontal bending machine Fastech FP 30 Description • Press force: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar over the upper die: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power consumption: 3.0kW • Motor: 400 Volt 50Hz • Weight: 850kg • Dimensions L-W-H: 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: Cjdefg Eu Uspfx Aptsrg • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1x tool set • Double foot switch

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t Credpfx Ajx Ni E Ijptsg ja

Condition: new, Horizontal bending machine Fastech FP 20 Description • Press force: 20 tons • Stroke: 185 mm • Max. tool height: 200 mm • Flat bar, over the top edge: 200 x 12 mm • Working speed: 10.0 mm/s • Return speed: 10.0 mm/s • Working height: 930 mm • Table: 480 x 1060 mm • Total power consumption: 2.2 kW • Motor: 400 volts, 50 Hz • Weight: 530 kg • Dimensions L-W-H: 1150 x 480 x 1200 mm • Oil capacity: 12.0 l Codofg Evdjpfx Aptorg Features: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made of hardened and ground forged steel • Digital display for stroke adjustment • 1 tool set • Dual foot switch

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tool height: 200 mm, operating speed: 10 mm/s, working height: 200 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420HE Horizontal bending machine, with manual control and angle fine adjustment system Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Crsdpfx Apjflc Spjtog Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: good (used), Year of construction: 2019, operating hours: 1,404 h, machine/vehicle number: 397, Offer 26148 Crjdpfjy Uwhbox Apteg Technical data: - Pressing force 420 kN / 42 t - Stroke 0 - 300 mm - Stroke speed 0 - 0.6 m/min - Tool height 200 mm - Bending capacity - with MW 125 flat prism, approx. 200 x 16 mm - with MW 240 flat prism, approx. 200 x 24 mm - Pipe bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - for angle programming + length programming - controlled length stop 3000 mm - various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Crsdpfezl Axkox Aptsg Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, Year of construction: 1979, machine/vehicle number: 14256, Stehendbogenauslage mit Presswalzenauslage - Horizontal Stack Delivery with Pressing Stahl SBP 40Year 1979 - Serial-No. 14256/79 Size width max. 400mm Vertical press delivery -modified with SELFControl- Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Crsdergbz Ejpfx Aptjg

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Cedpfxsx Ed H As Aptsrg

Condition: new, pressure 10 t stroke 200 mm table-size 450 x 450 mm working speed: 10 mm/ sec. work height max. 940 mm Cjdpfxst Eacao Aptsrg toolpiece height max. 150 mm total power requirement 1,1 kW 150 x 6 mm weight 0,4 t dimensions 1,15 x 0,5 x 0,9 mm Horizontal bending machine with: - NC control - Dual footswitch - Set of standard tools

Condition: new, Year of construction: 2026, pressure 28 t stroke 180 mm table-size 300 x 550 mm Csdpfogvkmrex Aptsrg diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. Csdpfx Aefxygwoptsrg After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Year of construction: 2009, condition: good (used), machine/vehicle number: 133, Offer 18291 Hydraulic horizontal bending and straightening machine Technical data: - Bending force: 100 kN / 10 t Cjdog Ewi Nopfx Aptsrg - Adjustable bending force: 0 - 100 kN - Stroke: 0 - 150 mm - Working width: approx. 200 mm - Stroke speed: 0 - 0.6 m/min - Tool height: up to approx. 100 mm - Bending capacity: - with MW 100 prism, flat material up to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Straightening capacity Wy at a straightening block distance of 1 m: 100 cm³ - Drive: 400 V / 1.1 kW - Space requirement: approx. W 1100 x H 1000 x D 650 mm - Weight: approx. 400 kg

Condition: used, Year of construction: 2001, functionality: fully functional, number of cylinders: 4, working width: 1,600 mm, SECOND-HAND BENDING PRESS ITALPRESSE MOD. PHF 60 - CE RULES Crjdpfx Apsx Rdkbjtog - Platens dim. mm. 1600X1100 - N. 4 cylinders - Max opening 1000 - Motors max 1.5 kw - Volt. 380/50 - Year 2001

Condition: good (used), Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation Cjdpfx Apst Hmhlstorg -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 Cedjy D Sy Rjpfx Aptsrg - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, functionality: fully functional, machine/vehicle number: 86, SECOND-HAND BENDING PRESS CERVINO - Platens dim. mm. 3500X1370 - Opening mm. 1000 Codpox Rrftofx Apterg - S/N 86

Condition: used, Year of construction: 1984, ja positioning automatic ja documentation ja ja Cedpfxex U A Sfj Aptsrg

Condition: used, functionality: fully functional, SECOND-HAND BENDING PRESS COLOMBO - Platens dim. mm. 3400X1290 - Opening mm. 800 Credox Rrfaepfx Aptjg

Condition: good (used), Year of construction: 2022, Adjustable stroke with digital read out positioning display Variable adjustable pressure Quick change tool system Table length: 1250 mm Table width: 660 mm Max. working pressure: 30 tons Max. stroke: 235 mm Max. workpiece weight: 250 mm Stroke adjustable: 0 - 235 mm Working speed: 10,000 mm/min Return speed: 20,000 mm/min Power: 3 kW Cedpfxjwrzmvo Apterg Flat capacity: 200 x 24mm x mm Tube capacity: 60 x 4Ø x mm Solid capacity: 40 x 40mm Length: 1250 mm Width: 700 mm Height: 1200 mm Weight: 1050 kg

Condition: used, SECOND HAND BENDING PRESS - Plates dimensions mm. 3100X800 - Opening mm. 800 Crjdpernnqtofx Aptog - 8 cyl. diam. 80 mm.

Condition: used, Year of construction: 2022, total length: 5,020 mm, total width: 2,150 mm, total height: 2,680 mm, Colour: White Weight: 9.100 kg Price: On request Cedozkki Uspfx Apterg - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00030430-ERH - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 15.0 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5025mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 9100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2005, condition: ready for operation (used), Pressing force: 6-8 bar Air consumption: 8 l/stroke Ram stroke height: 12 mm; 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Machine weight approx.: 80 kg Pneumatic press Schüco for Schüco punching tools Article no. Schüco: 290 124 Manual included Various crimping tools included! Tool numbers: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and fast clamping of the crimping tools The data for this listing was created using ModulMWS — software from LogoTech oHG. Manufacturer: SCHÜCO Model: Pneumatikpresse Machine type: Pressure: 6-8 bar Air consumption: 8 l/stroke Ram stroke: 12 mm : 134 mm Number of strokes: 400 strokes/min Max. punching force: 3500 kp Cjdpfeyzkifox Aptorg Machine weight approx.: 80 kg Pneumatic Schüco press for Schüco punching tools Schüco article no.: 290 124 Manual included Various crimping tools included! Tool no.: 283073, 280162, 299259, 283492, 283072, 282867, 282644, 282663, 282868, 283071, 283072 2 quick-release levers for safe and rapid clamping of crimping tools Data for this offer was created with ModulMWS – software by LogoTech oHG.

Condition: used, Year of construction: 1994, machine/vehicle number: 49504, Stehendbogenauslage mit Markiereinrichtung - Horizontal Stack Delivery with Pressing - Marking Stahl SBP 46.2Year 1994 - Serial-No. 49504/94-218513 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Csdpfxsh Ax S Dj Aptsrg

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Credpfx Ajxpqy Djptjg Good condition

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control Csdpou Nfrpjfx Aptjrg accessories: - div. limit stops, tools, try square and marking gauges i.D. *