Used Hub Spindle for sale (14,081)

Condition: used, Year of construction: 2001, spindle tilting: Ja -25 bis +45° height adjustment: elektrisch tilting adjustment: elektrisch read out tilting: digital read out spindle height: digital read out fence: Siko Zähler spindle diameter: 30 mm speeds: 1.500/3.000/4.000/4.500/5.000/6.000/8.000/9.000/10.000 U / min motor power: 7,5 kW motor brake: Ja, automatisch feeder: Wegoma 4 Rollen suction connection: 2 x 120mm machine length: 1900mm machine depth: 1400mm weight: 1000 kg Redpswx Nnbofx Adbebt

Condition: used, Make: PRÄWEMA, Model: 205HS2-2 / Synchrofine, Year of manufacture: 2008, Machine no.: 077238, Control unit, Manufacturer: Rexroth Indramat, Type: System 200 BTV20, including handheld operation terminal, Workpiece diameter: Ø 95mm, Maximum workpiece length: 59mm, Maximum spindle speed C-axis (workpiece spindle): 6,000 rpm / 7,000 rpm, B-axis (tool spindle): 2,000 rpm, Maximum feed rates Z/X: 60 m/min, Honing head ZNG-No.: 416101804-8, Year: 2008, Serial no.: 221, Machine bed granite, Manufacturer: Eckbert Reitz, Type: HFSL204HS2, Year: 2008, Workpiece automation, Surface finish inspection unit, Oil drip tray, Pump, Manufacturer: Brinkmann, Type: TH160/350-001, Operating hours as of 18.11.25: 69,518 Rsdpfx Adsx Ahc Nsbjbt +++ Attention: This item is part of an online clearance sale! +++

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Rsdpfxstr Ud Ss Adbobt Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Redpstzxh Tsfx Adbjbt Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: used, Year of construction: 1997, Technical details: Rbsdjwl Nm Djpfx Adbet number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t Rbodpfx Aoluhcgedbst spindle drive motor: 11 kW

Condition: good (used), Year of construction: 1967, LZ-Lathe Fabr.WEIPERT TYPE:UD 500 e year 1967 with digital readout ,top support feed tool holder MULTIFIX size C ,Forkardt chuck 315 mm. Center height : 250 mm Center width : 1500 mm Rbedpfx Aeu Rd H Isdbot spindle bore : 65 mm Spindle speed : 14 -1400 rpm Machine is in good condition .

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm spindle bore : 38 mm Rbedpfx Adoqwgzqsbet Machine in good condition from the training workshop Machine documentation available .

Condition: repair required (used), Year of construction: 1991, LZ-Lathe Fabr.KERN Type :DS 22 A Year of construction: 1991 with 3-axis digital readout Heidenhain . Steady rest, tool holder Multifix B, rear panel, machine documentation available. Machine is defective ( clutch ) Center height : 275 mm Turning diameter over face support : 300 mm Center distance : 1000 mm Rjdpfeq Hd I Tsx Adbobt Spindle bore : 52 mm Spindle speeds : 18 - 1800 rpm . Machine is sold at a fixed price .

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Redpfx Aoq Hd Ipjdbobt Machine is defective ( clutch ) Center height: 214 mm turning diameter over face support : 200 mm Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Machine is sold at a fixed price.

Condition: good (used), Year of construction: 1962, Centre lathe manufacturer VDF HEIDENREICH&HARBECK type: 24 RO, year of manufacture 1962, overhauled in 1992. Equipped with 3-axis digital readout Heidenhain, 250 mm Forkardt chuck, Multifix B toolholder. Centre height: 255 mm Swing over bed: 510 mm Swing over cross slide: 270 mm Distance between centres: 1000 mm Spindle bore: 55 mm Spindle speeds: 20 - 900 rpm, Motor power: 6.5 kW Rbjdpfxjxziuwj Adbot The machine is in good condition, electrical diagrams available. Required floor space: Length 3 m, Depth 1.2 m, Height 1.3 m, Weight approx. 1800 kg.

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Rjdpfxjw S Ituo Adbebt Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition.

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Rjdpfx Adet Ipi Iobjbt Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Spindle bore: 55 mm Rsdpfevkuauox Adbjbt Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. For further information see data sheets.

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Redjx Hr Dujpfx Adbobt Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg.

Condition: good (used), Year of construction: 1970, LZ-Lathe Fabr.SCHAERER Type:UD500 Year 1970 overhauled 1991 With Forkadt chuck 315mm tool holder Multifix size C. Center height : 250 mm Center width : 1500 mm Rjdpfxeu Rduro Adbsbt spindle bore: 65 mm Spindle speed : 18 - 900 rpm. Machine in good condition .

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Rbjdpfxjtttige Adbet Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible .

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. Redpfxoxawcte Adbsbt If you have any further questions, we are happy to assist you.

Condition: used, Year of construction: 1996, Technical details: number of spindles: 8 Rbsdpsydnglofx Adbot spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S Dnt Yob: 1996 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling configurable as 2x4 spindles, pick up preparing in positions 4 and 8 Thread cutting couplings Electronic cross slide adjustment in positions 1, 2, 5, 6; 2 independent feeds Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA40/42/P) Coolant tank with hinged chip conveyor Control: Siemens S7-300 PLC Display device: Siemens Simatic HMI Delivery without BDE Tooling included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Rodpfx Ajycpwpjdbebt Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: used, Cutter SCM Rbjdpfxsuzivpe Adbst

Condition: used, heavy-duty tilting spindle moulder Martin T27 automatic tilting – 46° automatic height adjustment precision fence with fine adjustment control panel at eye level, swivelling, with 5.7" touchscreen spindle travel 150 mm spindle diameter 30 mm spindle with 6 speeds: 3,000 to 10,000 rpm motor 7.5 kW with electric brake machine is WORKSHOP TESTED – TOP CONDITION first delivered in 2010 machine from school environment only approx. 300 operating hours available from stock Lieboch Rodpfx Ajx U Arxsdbobt

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Rjdpfsxlzg Hox Adbjbt Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: good (used), Year of construction: 1980, Table dimensions 1.100 x 760 mm Motor output 4,7 kW Spindle diameter 30 mm reus 3.000/4.500/6.000/9.000 U/min Rbjdpfx Adexzuwwjbst

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Rbedpjv Ai N Ujfx Adbjt