Used Hub Spindle for sale (14,025)

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes Rodsuqkf Nepfx Aazjn 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm Rjdpfx Aaevd Dbnjzen spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), functionality: fully functional, spindle bore: 36 mm, center height: 155 mm, turning length: 800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, Used Weiler Condor lathe, No. 7939, Rsdpfev R Tdxsx Aazjn Center height 155mm, Center width 800mm, Spindle speeds 12-2800 rpm, spindle bore 36mm Accessories: 1x RÖHM three-jaw chuck Ø 160mm, Multifix base body size B with 2 inserts, keyless drill chuck, live center, and coolant system. The machine is in stock at our facility in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Distance between centres: 500 mm Rodjuqb Emspfx Aazjn Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: good (used), Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc. Rjdpfx Aajx Tqnrjzsn

Condition: good (used), WEINIG UNIMAT 23 9 SPINDLE SHORT INFEED TABLE 1: BOTTOM 7,5KW 2: RIGHT 7,5 KW 3: LEFT 7,5 KW 4: RIGHT 7.5 KW 5: TOP 11 KW 6: BOTTOM 7,5 KW 7: TOP 7,5 KW 8: BOTTOM 7,5 KW 9: UNIVERSAL 7,5 KW 360° TILTABLE 15 x DRIVEN TOP FEED ROLLERS Rsdpfxjyahubo Aazsn 5 x DRIVEN BED FEED ROLLERS AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS PNEUM. POWERED HOLD DOWN ON 6+8 DIMENSION: APPR 5400 X 2000 X 1800 MM WEIGHT: APPR. 6500 KGS DUSTHOODS: 9 x 140 MM DIAMETER POSSIBLE TO INCREASE MOTOR SIZES AS NEEDED

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 1824 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 >> Feed rates from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle Redpfovrcqdjx Aazsn About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. Even at high speeds, the Weiler runs very quietly. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler Commodor guide and feed spindle lathe with 3-axis digital display K&C NEW Overhauled with acceptance certificate for tolerances of new machines Technical data: >> Machine no. 2020 >> Center height 180 mm >> Center width 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle passage 56 mm >> Short taper spindle head DIN 55029 size 5 >> Tailstock MK 4 Rsdpfx Asvrckqsazjn >> Feeds from 0.026 to 0.888 mm / rev >> Possible threads metric, inch, module and diametrical pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 KW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching of the counting direction, >> Three-jaw chuck wedge bars as good as new 200mm 1 set of jaws >> Mulifix size B with 2 pcs steel holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops On request: covers for the guide. and feed spindle About the machine: A Weiler Commodor guide and feed spindle lathe is offered in a geometrically overhauled condition. The guides have been reground or re-scraped. With acceptance according to the test report. 2K glossy white paint. The Multifix and chuck accessories are new. For safety: The machine has a brake motor, electronic spindle protection and two emergency stops - an absolutely new lathe. The Weiler runs very quietly even at high speeds. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and feed spindle table lathe in excellent condition! Technical specifications: >> Machine no. 2801 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore 23 mm >> Short-taper spindle head DIN 55027 >> Tailstock MT 2 >> Feed rates from 0.03 to 0.15 mm/rev Rodjv Tyzcopfx Aazen >> Possible thread sizes: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increments of 1 mm Drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tool About the machine: Offered is a Weiler Primus table lathe with guide rail and drawbar in very good condition. The machine is fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus comes from a state-owned company where it was used little. This newer generation of Weiler lathes is very user-friendly, and surfaces can be produced with a polished finish. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition. (The base cabinet is included; the machine is not bolted to the machine.) A digital display is available for an additional charge.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Rsdpfevv Etvex Aazsn Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Rjdpfowvuf Tex Aazon Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm Rsdpfx Aaevambcjzon >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: Rodpfx Aaevrdlcjzjn >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: Rsdpfx Aewrm Dtsazen A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Rsdpfx Aewthbijazjn Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm Rjdswag Stopfx Aazjn >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Rjdpfxox D Dnks Aazsn Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Application Types Boring & Drilling (Wood) Rsdpfx Aex S Sizoazen

Condition: new, Year of construction: 2025, load capacity: 25,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,995 mm, fork length: 2,400 mm, empty load weight: 36,900 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including the drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on-site now and receive expert advice – we will find the right solution for you. Industrial Truck Data: Manufacturer: Heli Model: Counterbalance Forklift CPCD250-G2-VO Power source: Diesel Lifting capacity: 25,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,000 mm Redpfxjyfuw Tj Aazon Mast type: Duplex Free lift: No Overall height: 3,995 mm Fork length: 2,400 mm Unladen weight: 36,900 kg Tyres: Solid rubber Model designation: CPCD250-G2-VO Cab type: Full cabin – front, roof & rear window + steel doors (suspended) Lighting: 2x front work lights Lighting: 2x rear work lights Lighting: Road equipment for potential use on (restricted) public roads: beacon, tail lights, reversing lights, reflectors, etc. Attachment: Side shifter Attachment: Fork positioner Attachment: Additional hydraulic circuit – piped to fork carriage

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,330 mm, fork length: 1,200 mm, empty load weight: 3,740 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards—for maximum quality and your safety. From the chassis to the battery, through drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after purchase Test and get advice on-site now—we will find the right solution for you. Industrial Truck Specifications: Rodpfx Aaoyfuw Hozon Manufacturer: Heli Type: Counterbalance Forklift CPYD25-G3-KU Drive type: LPG Load capacity: 2,500 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 3,300 mm Mast type: Duplex Free lift: No Overall height: 2,330 mm Fork length: 1,200 mm Unladen weight: 3,740 kg Tyres: Solid rubber Model variant: CPYD25-G3-KU Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road traffic equipment compliant for possible use on public (limited) roads: indicator light, tail light, reverse light, reflector, etc. Attachment: Sideshift Attachment: Additional hydraulic circuit routed to fork carriage

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, fork length: 2,100 mm, empty load weight: 12,800 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are fully refurbished to FEM-4.004 and current safety standards – ensuring maximum quality and your safety. From chassis to battery, including drivetrain, brakes, steering, and electrics – every vehicle undergoes comprehensive inspection and reconditioning. Rsdeyfuwtjpfx Aazsn ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test and receive advice on site – we’ll find the right solution for you. Industrial Truck Specifications: • Manufacturer: Heli • Model: Counterbalance Forklift CPCD100-G3-CU • Drive type: Diesel • Load capacity: 10,000 kg • Year of manufacture: 2025 • Operating hours: 0 • Lift height: 4,000 mm • Mast type: Triplex • Free lift: No • Overall height: 3,250 mm • Fork length: 2,100 mm • Unladen weight: 12,800 kg • Tyres: Solid rubber • Model type: CPCD100-G3-CU • Cabin type: Full cabin – front, roof & rear window + steel doors (suspended) • Lighting: 2x front work lights • Lighting: 1x rear work light • Lighting: Rotating beacon • Lighting: Road equipment (StVO) for limited on-road use: indicator lights, tail lights, reverse lights, reflectors, etc. • Attachments: Sideshifter • Attachments: Fork positioner • Attachments: Additional hydraulic circuit – extended to fork carriage

Condition: new, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,030 mm, fork length: 1,800 mm, empty load weight: 9,600 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS AT WORK. Our forklifts are fully reconditioned to FEM-4.004 guidelines and the latest safety standards – for maximum quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics – every machine is thoroughly inspected and refurbished. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection Rjdpfx Aaeyfuwmozjn ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get advice on-site now – we’ll find the right solution for your needs. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPCD70-G3-YC Drive type: Diesel Load capacity: 7,000 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,000 mm Mast type: Duplex Free lift: No Overall height: 3,030 mm Fork length: 1,800 mm Unladen weight: 9,600 kg Tyres: Solid rubber Model designation: CPCD70-G3-YC Cab type: Full cab – front, roof & rear windows + steel doors (suspended) Lighting: 2x front work lamps Lighting: 1x rear work lamp Lighting: Rotating beacon Lighting: StVZO – equipment for potential use on (limited) public roads: indicator, tail light, reversing light, reflector, etc. Attachment: Side shifter Attachment: Fork positioner Attachment: Additional hydraulic circuit – fitted up to fork carriage

Condition: new, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: triplex, construction height: 3,280 mm, fork length: 1,800 mm, empty load weight: 9,600 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Rodpfx Aeyfuwaeazen Our forklifts are completely refurbished according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From frame to battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and get advice on site now – we’ll find the right solution for you. Industrial Truck Specifications: • Manufacturer: Heli • Model: Counterbalance Forklift CPCD70-G3-YC • Drive type: Diesel • Load capacity: 7,000 kg • Year of manufacture: 2025 • Operating hours: 0 • Lifting height: 4,500 mm • Mast type: Triplex • Free lift: No • Overall height: 3,280 mm • Fork length: 1,800 mm • Unladen weight: 9,600 kg • Tyres: Solid Rubber • Model type: CPCD70-G3-YC • Cabin type: Partial cabin – front, roof & rear window • Lighting: 2x front work lights • Lighting: 1x rear work light • Lighting: Rotating beacon • Lighting: Road equipment for potential limited public road use in accordance with StVZO – indicator, tail light, reverse light, reflector, etc. • Attachment: Sideshift • Attachment: Fork positioner • Attachment: Additional hydraulic circuit routed to the carriage

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,030 mm, fork length: 1,500 mm, empty load weight: 8,470 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN USE Our forklifts are technically refurbished according to FEM 4.004 and the latest safety standards – ensuring maximum quality and safety. From the chassis to the battery, including drive train, brakes, steering, and electrics – every vehicle is thoroughly inspected and serviced. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test on-site now and receive individual advice – we’ll find the right solution for you. Industrial Truck Specifications: Manufacturer: Heli Model: Counterbalance Forklift CPCD50-G3-YC Drive type: Diesel Load capacity: 5,000 kg Year of manufacture: 2025 Rodpjyfuvvsfx Aazjn Operating hours: 0 Lift height: 4,000 mm Mast type: Duplex Free lift: No Overall height: 3,030 mm Fork length: 1,500 mm Unladen weight: 8,470 kg Tyres: Solid rubber Model type: CPCD50-G3-YC Cabin type: Fully enclosed cab – front, roof & rear windows + steel doors (suspended) Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Rotating beacon Lighting: Road equipment (per StVZO) for potential use in public (restricted) road traffic: indicator lights, tail lights, reversing light, reflectors, etc. Attachment: Sideshift Attachment: Fork positioner Attachment: Additional hydraulic circuit routed to fork carriage

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: triplex, construction height: 1,990 mm, fork length: 1,200 mm, empty load weight: 4,750 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards, ensuring maximum quality and safety for your operations. From the chassis to the battery, including drivetrain, brakes, steering, and electrics – each vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs processing ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase On-site testing and consultation available – we will find the right solution for you. Industrial Truck Specifications: - Manufacturer: Heli - Type: Counterbalance Forklift CPCJ25-KU-4R - Drive: Diesel - Load capacity: 2,500 kg - Year of manufacture: 2025 - Operating hours: 0 - Lift height: 3,700 mm - Mast type: Triplex - Full free lift: Yes - Overall height: 2,015 mm - Fork length: 1,200 mm - Unladen weight: 4,750 kg - Tyres: Pneumatic - Model variant: CPCJ25-KU-4R Rodpfx Ajyfuvpjazon - Cabin type: Partial cab – front, roof & rear window - Lighting: 2x front work lights - Lighting: 1x rear work light - Lighting: Rotating beacon - Attachment: Sideshift - Attachment: Additional hydraulic circuit routed to carriage