Used Hydraulic Horizontal Press for sale (41,870)

Year of construction: 1992, condition: excellent (used), Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented Fpodpfeh U A Ibex Aabon - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Technical specifications: Pressing force: 500 tons Distance between uprights: 4,300 mm Dimensions (length x width x height): approx. 5,100 x 900 x 4,300 / 5,600 mm For transport (in two parts): Dimensions: 2 x 5,100 x 900 x 3,050 mm Weight: 1x 15,700 kg – 1x 13,200 kg (total 28,900 kg) Fpjdpfjxgblljx Aabon The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, filling opening width: 890 mm, filling opening length: 1,020 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, total width: 2,525 mm, total height: 2,559 mm, total length: 5,366 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 7,000 kg, HSM HL 7009 Re/Li Horizontalballenpresse. Die Maschine befindet sich in sehr gutem Zustand und wird regelmäßig von einem autorisierten Servicecenter gewartet. Diese Ballenpresse ist für größere Entsorgungsprojekte im Einzelhandel sowie in kleinen und mittleren Zentrallagern konzipiert. Die Ballen des Modells HL 7009 haben einen Querschnitt von 1100 x 1100 mm und können bei einer Ballenlänge von 1200 mm bis zu 600 kg wiegen. Dies gewährleistet eine optimale Ausnutzung der Nutzlast des LKWs. Presskraft: 700 kN Spezifische Presskraft: 58 N/cm² Antriebsleistung: 10,5 kW Spannung / Frequenz: 400 V / 50 Hz Fpsdpfx Aaexc U Acsbjn Leerlaufleistung (theor.): 42,97 m³/h Einfüllöffnung Breite x Länge: 890 x 1020 mm Ballen Breite x Höhe x Länge: 1100 x 1100 x 1200 mm Gesamtlänge x Breite x Höhe: 5366 x 2525 x 2559 mm Ballengewicht: 600 kg

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: STHP 80KN, total height: 1,320 mm, total width: 510 mm, total length: 200 mm, pressing force: 8 t, table width: 300 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Fedpfx Aot Rhb Ijabjpn Bmcbfntr with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders.

Condition: used, functionality: fully functional, machine/vehicle number: 71737, total length: 1,575 mm, total width: 640 mm, total height: 1,970 mm, overall weight: 645 kg, input voltage: 3,000 V, pressing force: 40 t, pressing speed: 5 mm/s, The hydraulic two-column assembly and pressing press with a force of 40t OKS 1671M is designed for straightening parts, pressing in and out of sleeves, bushings, bearings, gears, as well as other pressing works during the repair of tractors, cars and agricultural machinery. The press can be used for cutting, bending, drawing and other operations. Maximum force, kN (tf) – 392(40) Maximum working pressure in the hydraulic system, MPa (kgf/cm2) – 20(200) Fpodpewbz Irofx Aabjn Piston stroke, mm – 250 Piston speed during the working stroke, mm/s – 5 Maximum distance between the table and the piston, mm – 1000 Maximum table travel, mm – 750 Dimensions of clearances between the posts, mm: from front to back – 250 from left to right – 1000 Dimensions of the table support plates, mm – 400х450 Working fluid – industrial oil I20A GOST 20799-75 Pump type – eccentric three-plunger Feed, l/min – 5 Nominal speed, rpm – 1500 Power consumption, kW – 3 Overall dimensions, mm – 1575х640х1970 Weight, kg – 645

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm Fpjdpfevzxphjx Aabsn table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Fpjdpfxsuk I Nxj Aabsn

Condition: new, Year of construction: 2025, VIBER-SYSTEM WP100 Hydraulic Press Pressing force: 100 tons Piston stroke: 279.4 mm Working range (height): 101.6 – 1016 mm Working width: 812.8 mm Working pressure: 6.9 – 8.6 bar (100 – 125 PSI) Fedpfx Aaexdb Inebepn Air connection: 1/4″ Operation type: Manual-pneumatic Dimensions (L × W × H): approx. 1092 × 991 × 1905 mm Net weight: 520 kg Gross weight (with packaging): 555 kg Structural element thickness: Frame: 15 mm, Table: 20 mm, Prism: 30 mm

Condition: ready for operation (used), Enerpac RR5013 50 ton hydraulic press Workshop press Fpjdpfx Aeu U H S Seabon Max. Operating pressure: 10,000 PSI Stroke: 330mm Compressive force: 50 tons Pressure Ø: 80mm Own weight: 670 kg You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), For sale: a robust hydraulic press from the renowned manufacturer Vogel & Co Pressenfabrik Berlin-Borsigwalde. Fpodpfow Rc Hmex Aabon Model: 40×250 Machine number: 1715 Maximum pressure: 40 tons Oil capacity: 150 liters The machine is in good technical condition, complete, and comes with a control panel. Sturdy, stable construction – ideal for industrial applications in pressing, forming, or assembly. Electric power supply, hydraulic drive. Mounted on a pallet for easy loading. Condition: used, fully operational, with normal signs of wear.

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST Fpedpfx Aaew U U S Nebjn throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) Fodpfx Aaowvva Sjbspn with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, pressure 200 t stroke 300 mm table surface area 1900 x 440 mm column travel between the guideways 1900 mm working feed 5,0 mm/sec engine output 15,0 kW weight of the machine ca. 4.800 kg. range L-W-H 2.570 x 1.665 x 2.860 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports Fedpfx Aajxabw Isbepn - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm Fodpfx Aevzxrpoabspn ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm Fpjdpfx Aexabrfjabon column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition Fpedpfsvzxq Sox Aabjn

Condition: new, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 2070 kg. range L-W-H 2200 x 1200 x 2550 mm Display machine from 2023 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports Fodpfxsxabnas Aabspn - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the side - Operation manual

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s Fjdpfx Asvzxp Uoabspn feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm Fpsdpevuuflofx Aabsn hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm Fsdovuuckepfx Aabjpn hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm Fedpfovut Rmox Aabopn permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm Fpsdpfsvut N Nsx Aabjn table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm Fpjdpfxevut H Io Aabsn table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm Fpsdpjvuk Ezjfx Aabjn throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation Fpjdpevut Edefx Aabjn can be inspected in running condition in our warehouse - new control can be offeren on request