Used Hydraulic Machine Vise for sale (91,327)

Year of construction: 2022, condition: ready for operation (used), This Durma MS 2004 NC was manufactured in 2022. It features a hydraulic drive and NC-controlled back gauge, ensuring precise shearing of sheet metals up to 6 mm thick. With a cutting length of 2000 mm and motor power up to 7.5 kW, it's ideal for handling steel, aluminum, and other metals. Consider the opportunity to buy this Durma MS 2004 NC hydraulic shearing machine. Contact us for more information about this machine. Lsdpfxox D Iy Rs Aanjhr Application Types Shearing

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized control Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO position control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for access protection - 3 material support arms with ball rollers - Electric foot switch Lhedpfxsd Hxx Ao Aaner - Spare blade - Oil cooler with air heat exchanger - Extremely heavy-duty machine in very robust construction Base machine dimensions L x W x H: 4650 x 2610 x 3200 mm Base machine weight: 27,000 kg Transport space required (base machine) L x W x H: 4650 x 2610 x 3200 mm Transport space required (additional) L x W x H: 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau. Test cuts possible.

Condition: used, machine/vehicle number: VS94NTRGSMA86xxxx, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21540 Specifications: EU-approved until 28.07.2026 2021 model Tires (see pictures) Length: 1,290 cm Width: 255 cm Axle distance: 181/181 cm Curb weight: 13,940 kg Max payload: 59,060 kg Hydraulic loading ramps Lift on 1st axle Toolbox Lhsdpfx Aaoxm S Udsner Description:Rojo semi low-loader from 2021 with a maximum payload of 59 tons.The trailer is EU-approved until July 2026.Available for prompt delivery. Technical approved: Yes EU-approved until: 28.07.2026 Own weight: 13940 Total Weight: 73000 Payload: 59060 Width: 255 Length: 1290 Model: 2021 Rojo Maskinsemi m/ hydrauliske kjørebruer

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 Ledpfx Aju Ibukjanjhr accessories: - div. single and add-on parts *

Year of construction: 2003, condition: ready for operation (used), This Battenfeld HM 1600/750 was manufactured in 2003. It features a clamping force of 1,600 kN and an injection pressure of 2,116 bar. The screw diameter is 50 mm, and it includes a unilog CC300 B4 control system. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. Ledpfx Aaox D Hg Nonshr Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,871 h, General Data Measurements width 2500 mm Measurements depth 8500 mm Measurements height 2500 mm Machine weight 20000 kg Injection Unit Screw diameter 40 mm Injection pressure 2400 bar Screw speed 300 r/min Adjustable heating zones 5 Nozzle pressure 68 kN Clamping Unit Clamping force 7000 kN Lhjdjx D E Dtepfx Aanjr Opening stroke 1250 mm Max open daylight 1700 mm Mould height min 450 mm Mould height max 1150 mm Ejector stroke 300 mm Ejector force for / back 180 kN This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2005, operating hours: 79,600 h, General Data Machine weight 22500 kg Clamping Unit Ledpfx Aex D Hnasanehr Clamping force 4000 kN Injection Unit Shot weight 1860 g Screw diameter 90 mm This Arburg 820S-4000-3200 was manufactured in 2005. It features a clamping force of 4000 kN, a screw diameter of 90 mm, and a shot weight of 1860 g. The machine operates with a SELOGICA control system and has a total installed power of 96.2 kW. Consider the opportunity to buy this Arburg 820S-4000-3200 hydraulic injection moulding machine. Contact us for further details regarding this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1300 kN Mould height min 275 mm Mould height max 500 mm This Battenfeld HM 1300/750 was manufactured in 2004. It features a clamping force of 1,300 kN, injection pressure of 2,116 bar, and a screw diameter of 45 mm. Equipped with a Unilog CC300 B4 control system, it supports a mold height range of 275 to 500 mm. Consider the opportunity to buy this Battenfeld HM 1300/750 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Lhjdpfox D Hhajx Aansr

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2400 mm Measurements depth 7800 mm Measurements height 2200 mm Machine weight 20000 kg Main Drive Distance between bars 810x710 mm Injection Unit Screw diameter 70 mm Shot weight 1090 g/PS Stroke volume 1212 cm³ Injection pressure 1877 bar Clamping Unit Clamping force 4200 kN Distance between bars 800x710 mm Ljdpfxsx D Hrrj Aanohr Size of mold platens 1200x1100 mm This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,000 h, Injection Unit Screw diameter 45mm Clamping Unit Clamping force 150 T Distance between bars 510 - 510mm Mould height min 400mm Mould height max 700mm Lsdpex D Eg Iofx Aanehr Additional Equipment Core pulls: 2x This injection moulding machine was manufactured in 2001. A robust Netstal SYNERGY 1500-600, it features a clamping force of 150 T and a screw diameter of 45 mm. It has been used for PP materials, ensuring reliability and efficiency with 56,000 production hours. A great opportunity to buy this Netstal SYNERGY 1500-600 injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2009, Injection Unit Screw diameter 180 mm Clamping Unit Clamping force 3300 kN Lodpfox D I R Ajx Aanshr This OiMA SACMI 3300-180 was manufactured in 2009. It features a robust electric-hydraulic hybrid drive and an integrated cooling system. The machine is equipped with a GDNet communication interface for real-time monitoring and diagnostics, ideal for producing medium-to-large plastic components. Consider the opportunity to buy this OiMA SACMI 3300-180 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Clamping Unit Clamping force 1300 / 1600 / 2000 kN Additional Equipment Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Application Types Lodjx D E Dyspfx Aanohr Injection Moulding

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1900 mm Measurements depth 6600 mm Measurements height 2400 mm Machine weight 14900 kg Injection Unit Screw diameter 50 mm Shot weight 482 g Stroke volume 530 cm3 Injection pressure 2426 bar Adjustable heating zones 5 Nozzle pressure 110 kN Clamping Unit Lhodsx D Nwqjpfx Aansr Clamping force 2500 kN Opening stroke 670 mm Max open daylight 1380 mm Mould height min 330 mm Mould height max 710 mm Ejector stroke 200 mm Ejector force for / back 81 kN Media Pump drive power 30 kW Oil tank 550 L This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2500 kN, a screw diameter of 50 mm, and a shot weight maximum of 482 g. The machine has a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,300 h, General Data Measurements width 2200 mm Measurements depth 7200 mm Measurements height 2400 mm Machine weight 17700 kg Injection Unit Screw diameter 60 mm Shot weight 723 g/hp max Lhodpfex D N Sbex Aanor Injection pressure 2500 bar max Clamping Unit Clamping force 3200 kN Opening stroke 700 mm max Distance between bars 720 mm x 720 mm Mould height min 300 mm Size of mold platens 1040 mm x 1040 mm Additional Equipment The Wittmann robot is not included Conveyor belt is included, protective housing only for the electrical components No other peripherals are included. This hydraulic injection moulding machine was manufactured in 2004. It features a screw diameter of 60mm and can handle a maximum injection weight of 723g. The machine supports a clamping force of 3200kn with a maximum opening stroke of 700mm. It is equipped with special features like 2xAS core pull and 6xDS hot runner control points. Ideal for robust performance in a production setting, the Arburg Allrounder Selecta 720 S 3200-2100 machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, Injection Unit Screw diameter 25 mm Clamping Unit Clamping force 100t This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. Lhjdjx D Rcuepfx Aanjr Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2013, operating hours: 54,526 h, Injection Unit Screw diameter 35mm Ljdpox D Rk Eefx Aanehr Clamping Unit Clamping force 150t Injection Unit Screw diameter 35mm Clamping Unit Clamping force 150t This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2007, condition: ready for operation (used), This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine. Lhsdpfxjx D Hgve Aaner Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,396 h, Clamping Unit Clamping force 4200 kN Injection Unit Screw diameter 70 mm This DEMAG Ergotech 4200-2300 was manufactured in 1998. It is a hydraulic injection moulding machine featuring a clamping force of 4200 Kn and includes a Wittmann robot. Consider the opportunity to buy this DEMAG Ergotech 4200-2300 hydraulic injection moulding machine. Contact us for more information. Application Types Lhedpjx D Hyvsfx Aanor Injection Moulding

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, General Data Measurements width 1810 mm Measurements depth 6950 mm Measurements height 2213 mm Machine weight 15750 kg Injection Unit Screw diameter 45 mm Clamping Unit Lhjdpfx Aasx D Hntsner Clamping force 350 ton Media Internal cooling Yes Additional Equipment Fanuc Robot This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2012, condition: ready for operation (used), Injection Unit Screw diameter 55 mm Lhodpfjx D I Egjx Aanor This Engel victory 750/160 Spex was manufactured in 2012. It is a hydraulic injection moulding machine featuring core pull, an ejector plate safety device, a 1/2" air valve, and a 10-way water distributor. Consider the opportunity to buy this Engel victory 750/160 Spex hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2014, operating hours: 18,612 h, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 150 t Lsdox D Rc Ujpfx Aanjhr This Arburg 520 H 1500-400 was manufactured in 2014. It features a closing force of 150 tons and a screw diameter of 35mm, suitable for precision hydraulic injection moulding. Operating on 400V, it has a total connected load of 89 kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,777 h, General Data Machine weight 6700 kg Lhsdpfx Ajx D Ecpoansr Clamping Unit Clamping force 80 t This Engel Victory 330H 80V/80 Combi was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of approximately 80 tons and has been operated for about 5,900 hours. Weighing 6.7 tons, consider the opportunity to buy this Engel Victory 330H 80V/80 Combi hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Application Types Lsdox D Rqrepfx Aanshr Injection Moulding

Year of construction: 2001, operating hours: 92,300 h, condition: ready for operation (used), General Data Machine weight 160000 kg Lhsdpfxox D Ev No Aansr This Battenfeld TM 1600/1000 was manufactured in 2001. A robust injection moulding machine with 160 tonnes of clamping force and a screw diameter of 50 mm. It features a distance between tie bars of 520x520 mm and an opening stroke of 480 mm from the installation height. Ideal for precise and efficient production, the Battenfeld TM 1600/1000 machine we have for sale is a valuable asset for any operation. Contact us for further details. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 Kn This Engel Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 1100 Kn. Consider the opportunity to buy this Engel Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding Ljdpfxex D Hd Io Aanohr