Used Hydraulic Punching Machine for sale (97,962)

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed Gedoxg Rvaopfx Aabjuh • Motorized central oil lubrication • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21319 Specifications: Gedpfx Aajxcfncobouh 2020 model Hydraulic rock splitter 600 bar 23.5 kg Hydraulic generator Weight for hammer Ready for delivery Description: We have a 2020 sp400 Hydraulic splitter w/ Air hammer, plumb bob and hydraulic generator for sale. Everything works as it should and has been used little. Ready for delivery Own weight: 23

Condition: ready for operation (used), KINGSLAND PUNCHING MACHINE MODEL: 55P625 Complete with various punches Guedpsxfvtzjfx Aabsh

Condition: excellent (used), Technical specifications: 2 hydraulically adjustable rolls 3 driven rolls Roll diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Godpsxgukujfx Aabjuh Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can operate horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: BX 1103403A, sheet thickness (max.): 3 mm, type of input current: three-phase, Contact us for more information. Gedpfxswp Aa Ss Aabouh

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 1240 mm Measurements depth 4530 mm Measurements height 1910 mm Machine weight 3500 kg Injection Unit Screw diameter 32 / 36 / 40 mm Stroke volume 121 / 153 / 188 cm³ Injection pressure 218 / 173 / 140 MPa Screw speed 0–230 r/min Clamping Unit Clamping force 900 kN Opening stroke 320 mm Max open daylight 700 mm Gusdpfjwvwchsx Aabsh Ejector stroke 100 mm Ejector force for / back 33 kN Media Oil tank 190 L This HAITIAN MA900 II eco was manufactured in 2016. It is a hydraulic injection moulding machine with a clamping force of 900kN and a shot volume of 153 cm3. Consider the opportunity to buy this HAITIAN MA900 II eco hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm Gusdpfov T Anlox Aabeh • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: used, Year of construction: 2008, Serial number: Dxxxx Please contact ATS Norway for more information Please provide reference number upon request: 19891 Specifications: - 3 axles - Turn on 1 - 10 ton axles - Hydraulic bridges - Okay tires Gsdpfx Asv U R Tfjabsuh - Ready for delivery Description: 2008 Damm Machine tow with turn on 1. The trailer is EU approved and ready for delivery. Hydraulic bridges. Technical approved: no EU-approved until: 13.06.2025 Own weight: 6970 Total Weight: 30000 Payload: 23030 Width: 255 Length: 1110

Condition: good (used), functionality: fully functional, Year of construction: 2012, For sale: 1 piece used hole punch Manufacturer: Geka type: Puma 110 2HI Punching force: 110t incl. documentation Dimensions see type plate Machine can be inspected in our warehouse in 09599 Freiberg. Gjdpfeuihvzjx Aabouh

Condition: like new (used), Year of construction: 2003, Pivatic Automatic Line - Pivatic 800mm coil width uncoiler with sheet straightener and roller feeder- hydraulic Type: SMTCL 800 T5 Year of construction: 2003 - Pivatic hydraulic punching machine Type: PCC80 TTI Year built: 2003 Max pressure punching machine equipment: - two tool blocks AXIS Z1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). AXIS Y1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). -guillotine - unloading conveyor (conveyor belt) with additional moving table for sorting workpieces - unloading conveyor (conveyor belt) -control panel (SIMENS) - Hydraulic longitudinal bending module with working range of 1750mm Pivatic Type: FLN 175 Year of construction: 2003 Bending line equipment: -gripper feeder AXIS X1 - rotary table with a diameter of 750mm -EIA W1 longitudinal bending with a length of 1750mm -gripper feeder AXE A1 -gripper feeder AXIS B1 -AXIS Q1 longitudinal bending with length 1750mm - gripper feeder AXIS X1 - unloading conveyor -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -transport of workpieces is carried out on brush tables -Hydraulic transverse bending module with a working range of 800mm Pivatic TYPE: FSW 80 Year of construction: 2014 Bending line equipment: -loading conveyor (belt conveyor). Gusdpfotp Ta Esx Aabsh -OŚ A2 transverse bending with a length of 800mm -OŚ B2 transverse bending with a length of 800mm - unloading conveyor (belt conveyor) -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -the whole line is equipped with a safety system (light curtains SICK) - cooling system Highly efficient device. Greetings,

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Godpfx Ajv N Hrteabsuh Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Gedpfx Aaev Nwwasbsuh Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. Gedpow U U S Nefx Aabouh work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Year of construction: 2006, condition: excellent (used), Punching capacity in sheets at 37 kg strength up to: 2 and 3 mm Guedpfx Ajd D Ryfjabjh with various punching tools

Condition: good (used), Karl Tranklein ZP 39 two-station hydraulic bookbinding press The device is ready to work. The machine is like new. The press has a built-in hydraulic unit. Two independent stations, single piston surface: 325x440mm Gusdpfx Aaewt St Aebsh Irreplaceable in the bookbinding shop when producing books, blocks, etc.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,899 h, Other machines and tools included with the machine: - Tools belonging to the machine (a detailed list can be provided) - Quick Sharp - Multiset ITM BASIC MACHINE: TruPunch 3000 Large Format (S11) Machine Configuration: • C-frame structure • Coordinate guidance system • Linear magazine with 24 stations for clamps and tools • Hydraulic clamps (3 units) • Maintenance-free 3-phase servo motor drives • Repositioning unit with programmable stripper • Foot switch for clamp closure • Part removal flap • Transport and assembly fixtures Punching Head: • Servo-electric punching head • Rotatable single tool adapter • Manually adjustable press foot force • Programmable press foot positioning • Tool length compensation • Spray lubrication system for punches • Vacuum slug removal • Forming capability • Adjustable stroke rate • Tool lubrication level monitoring Control System: • TRUMPF controller based on Bosch Rexroth IndraMotion MTX • Control panel with 17" TFT display • Integrated technology database • Internet-based teleservice interface • Automatic shutdown function • NC program management • Production planning feature Data Transfer: Guedpfswm Shaex Aaboh • USB and network interfaces • Network connection (RJ45) Safety Features: • CE marking • Multi-beam light curtains • Rapid drive shutdown Advanced Standard Equipment: • 1st index pin position, right-hand inner side • Ball transfer tables • Finished parts container • Scrap/chip container OPTIONAL BENEFIT PACKAGES: 2. Productivity Package • MultiTool function • Sensor for part chute • Spray die lubrication with level monitoring 3. Punch Quality Package • MultiShear function • Deburring and roller technology • Adaptive stroke calibration 4. Forming Package • Tapping function with breakage detection • Marking/rapid beading function • MultiBend function • Height-adjustable clamps 5. Engraving Function 6. Smart Punch Monitoring 7. Wireless Operation Point 8. MobileControl App 9. 21 RTC cartridges + TOOLS!

Condition: good (used), Year of construction: 2003, Bobst SPrintera 106 PER, Last overhauled in 2023 Gjdpow Trg Isfx Aabouh The machine is in EXCELLENT condition, can be inspected in production at any time, and is immediately available. Machine Specifications: - NON Stop Feeder with automatic lateral shifting of the pile tray - Feeder with POWER REGISTER, double sheet detection, automatic tension control, and sheet guidance - Krifft & Zipsner Pallet Infeed System - Die Cutting Unit with Centerline System - 2 Stripping Stations with Bernoulli System - Blank Pile Delivery with automatic pallet changing device Technical Details: - Paper min. 70 gsm - Board up to 2000 gsm - Corrugated board up to 4 mm - Max. sheet size: 740mm x 1060mm / 29″ x 41.75″ - Min. sheet size: 350mm x 400mm / 14″ x 15.75″ - Max. mechanical speed: 12,000 s/h - Cutting force up to 2.6 MN - Max. pile height at feeder and delivery: 1700 mm / 67″ - Main motor power: max. 22 kW - Total connected load: max. 63 kVA Krifft & Zipsner logistics installation, new hydraulic pump, and all worn parts replaced.

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Godpotyqizsfx Aabjuh Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: used, pressure 100 t punching cross-cut in cmm Ø 31 in 25 mm stroke 10 - 50 mm column arm 510 mm work height max. 1100 mm no. of strokes 14 - 45 Hub/min punch diameter max. Ø 90.0 mm oil volume 103 l total power requirement 7.5 kW weight of the machine ca. 2400 kg. range L-W-H 1750 x 1020 x 2050 mm maintained condition (!!) New price without accessories approx. 25.000 euros Special price on request Gujdpsxabrfsfx Aaboh Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual

Condition: ready for operation (used), jaw width: 100 mm jaw height: 41 mm span width: 160 mm Guedped Hurfjfx Aaboh total height: 127 mm

Year of construction: 1996, condition: ready for operation (used), General Data Measurements width 2692 mm Measurements depth 5740 mm Measurements height 2387 mm Guedjxadp Topfx Aabjh Machine weight 10115 kg This STRIPPIT 1250SL/30 was manufactured in 1996. It features a robust 30 metric tonne punching capacity and a turret drive with 33 stations. The machine can handle a maximum stock size of 1,524 x 3,048 mm and thickness up to 83.8 mm. Ideal for high-speed precision with a maximum axis travel speed of 63,500 mm/min. Contact us for more information about this machine. Application Types Punching

Condition: good (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4488, control type: manual, degree of automation: manual, actuation type: manual, punching force: 55 t, stroke rate (max.): 38 1/min, Punching force 550 kN Guedpfxjxd U Nfo Aabsh Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 22247, Offered 23250 Technical data: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm Godpjv Hzr Nsfx Aabjuh - Weight approx. 600 kg - with - Pipe circular saw - Inside and outside pipe deburring device - Pipe necking device - Without tools

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm Gsdpfx Ao N Hcgjabsuh total capacity needed: 380 V, 11 kW weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Condition: used, Year of construction: 1996, machine/vehicle number: 206988, Order No. 24554 Technical Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Continuous cutting angle adjustment from 30 to 135° - Stroke rate 60 rpm Guodpfjv Uytzox Aabsh - Table support surface with T-slots 800 x 1000 mm - Depth stops with measuring scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - Electric - Foot switch - Space required approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg