Used Hydraulic Section Bending Machine for sale (99,055)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 73,135 h, General Data Machine weight 7800 Control Unit Brand KRAUSS MAFFEI Model n/a Dodpfxswpycdo Adksku Clamping Unit Clamping force 130 t This Krauss Maffei 130-380 CX was manufactured in 2007. A hydraulic injection moulding machine with a clamping force of 130 tons and a screw diameter of 35 mm. It has accumulated 80,019 operating hours, ensuring extensive production experience. Consider the opportunity to buy this Krauss Maffei 130-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2019, Serial number: YAMT13XX9J010xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18158 Specifications: - 3 axle - Lift on 1 - Turn on 3 - Hydraulic bridges - Manual widening - Extension: 6 metres - Tool cabinet - 10.5 tonne axles - Max payload: 37,529 kg - Ready for delivery Description: Max Maskinsemi from 2019. The trailer is EU-approved and ready for delivery. It has hydraulic bridges, manual widening and an extension of 6 metres. Technical approved: Yes EU-approved until: 12.09.2026 Own weight: 11971 Total Weight: 49500 Payload: 37529 Width: 254 Dkjdpjvg N D Tofx Adkou Length: 1325

Condition: good (used), Mandrel pipe bending machine, LANG type EL 45 Dkedpfx Aeqff E Esdkeu Technical data: for pipe diameter 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s Electrical connection 380 V, 2.2 kW Weight approx. 1000 kg with tool: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

Condition: excellent (used), Year of construction: 2021, Segmented sheet metal bending machine for up to 2 mm thickness, length 1370 mm. Dksdjxlqycopfx Adksu

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu wall strength 2.0 mm bar material - diameter 30.0 mm Dksdpfx Aoxaa Sdedkeu revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Year of construction: 2019, condition: like new (used), functionality: fully functional, Jutec 5045 Pipe Bending Machine – Excellent Condition – Half Price! For sale: Jutec 5045 semi-automatic pipe bending machine, purchased in 2019, used only for a few months. The machine is in near-new condition and immediately available. Location: Tatabánya, Hungary Price: HUF 10,500,000 net (approx. €26,500) – about half the original price! Technical Specifications: Model: Jutec 5045 Dkodexliuxepfx Adkju Type: Electromechanical, semi-automatic pipe bending machine Capacity: Ø 6–50 mm pipes For small bending radii, high precision Automatic central mandrel lubrication with minimal lubricant consumption Pneumatic valve actuation Spindle-driven frame adjustment Included Tooling: • Ø 33.7 mm pipe, bending radius R = 70 mm • Ø 42.4 mm pipe, bending radius R = 90 mm Condition: Virtually unused, like new Fully functional and immediately ready for operation Regularly maintained and kept in dry storage Inspection by appointment possible. Exchange or trade-in may be considered.

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 3700 mm Measurements depth 4100 mm Measurements height 2300 mm Machine weight 12500 kg Main Drive Spindle motor power 30 kW Additional Equipment CNC-controlled CybTouch 8 touchscreen for precise and easy settings Back gauge with ball screw and linear guide, CNC-controlled adjustable in the range of 5–1000 mm Motorized cutting gap and angle adjustment directly via the control panel 15 clamping units with rubber pads to prevent sheet slipping Built-in LED lighting to illuminate the cutting zone Safety elements include rear light curtain and fold-up plexiglass finger guard High-quality, resharpenable knives (upper knife 2-piece, lower knife 4-piece) Mobile foot pedal with emergency stop switch Built-in ball table for easy sheet movement Electrical components: Siemens and Mitsubishi // Hydraulic components: Hydac, Hoerbiger Dsdpfxsxd Ib Uj Adkoku This Metallkraft HTBS PRO 3113 was manufactured in 2022. It's a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine. Application Types Shearing

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Dksdpfjxc N Rhex Adkju Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: new, Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 62538, total width: 1,200 mm, total length: 1,500 mm, total height: 170 mm, overall weight: 10,000 kg, sheet thickness aluminum (max.): 2 mm, type of input current: three-phase, For sale is the automatic box bending and panel bending machine shown in the picture. Completely new condition, selling due to lack of use. Very fast and functional bending machine suitable for bending large series of boxes, panels, thin sheets. It has an electric servo drive, so the bending result is fast. Use: for bending wardrobes, kitchen appliances, electrical cabinets and other thin sheets. Dksdpfov S Exdox Adksu Machine features: -10 axes -Total width: 1500mm -Opening (Maximum height between lower and upper tool) -Bending thicknesses: Steel (dc01): 1.5mm Stainless steel: 1mm Aluminum: 2mm -Minimum bending dimensions for parts 340mmx340mm -Maximum sheet length 1600mm Weight: 10 Tons

Condition: new, Ostas SMR-S 2070x170 Premium - 3-Roll Plate Rolling Machine with Top Equipment Special price €19,500 instead of €22,100 excl. VAT Standard features: - Machine frame made from ST-52 steel - Large-diameter rolls made from SAE 1050 (CK-45) certified steel - Chain- and belt-driven helical gear for upper and lower rolls - Precision bending with brake motor - Rear roll motorized - Manually extendable roll - Conical bending device - Central lubrication system - Mobile control panel - CE-compliant - User manual Included additional features: - Digital readout for lower roll - Digital readout for rear roll - Lower roll motorized - Hardened rolls - Extended roll shafts for attaching profile and pipe bending rolls Optional equipment: - Profile/pipe bending rolls Technical data: - Bending length: 2,070 mm - Capacity with pre-bending: 5 mm - Capacity without pre-bending: 6 mm - Roll diameter: 170 mm Dsdoiza Ryopfx Adkjku - Min. bending diameter: 255 mm - Main motor power: 4 kW - Rear roll motor: 1.5 kW - Dimensions (W x H x D): 3,750 x 1,260 x 920 mm - Weight: 2,100 kg

Condition: used, Year of construction: 2000, operating hours: 70,000 h, Manufacturer: TBE BUTLER Model: TBE MULTIBEND Fully documented, available for inspection and verification! Wire diameter range: 1.0 mm to 10.0 mm 8 servo axes as standard – optionally up to 24 axes Integrated program memory Independent eyelet station Tilt control at the bending heads Servo indexing unit for 3D rotation Automatic part rotation for multi-level bending Modular tools – quick changeover times Dodpfx Aoxclfhodkoku Integrated decoiler Complete diagnostic and fault-tolerance systems Touchscreen programming controls – Allen-Bradley®

Year of construction: 2024, condition: new, 1050 mm 5,5 mm 5,0 mm roll diameter 130 / 195 mm 2,2 kW 1050 kg 2150 x 900 x 1200 mm Dkjdpfoq Sz Ahsx Adkeu - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: ready for operation (used), Year of construction: 2014, operating hours: 22,626 h, Injection Unit Screw diameter 25 mm Clamping Unit Clamping force 100t Dsdpfx Adjxizguekoku This Arburg 470 H 1000-170 was manufactured in 2014. A hydraulic injection moulding machine featuring a closing force of 100t and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 75kW. Ideal for precision moulding applications. Contact us for more information about this machine. Application Types Injection Moulding

Condition: used, pressure 32 t stroke 250 mm table-size 500 x 760 mm work height max. 925 mm bending speed max. 25 mm/sec tank capacity 80 l Dkjdegvkigopfx Adkeu Pressure power 320 bar total power requirement 5,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,3 x 0,5 x 1,3 m ding height: 200 mm Cutting capacity max. (St): 150 x 14 Punching capacity max. (St) Ø 35 Guide height: 200 mm

Year of construction: 2013, operating hours: 54,526 h, condition: ready for operation (used), This Arburg 520 H 1500-400 was manufactured in 2013. A hydraulic injection moulding machine with a closing force of 150t and a screw diameter of 35mm, it operates on 400V 3∼, 50Hz with a total connected load of 89kW. Consider the opportunity to buy this Arburg 520 H 1500-400 hydraulic injection moulding machine. Contact us for more information. Dsdpsxizf Rofx Adkoku Application Types Injection Moulding

Condition: new, pressure 28 t stroke 180 mm table-size 300 x 550 mm diameter of piston 130 mm work speed min. 2 m/sec work speed max. 9,8 m/sec return speed 20 mm/sec Max. pressure 200 bar weight of the machine ca. 0,65 t total power requirement 4 kW dimensions of the machine ca. 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a Dkjdpjgvkmrefx Adksu universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled, as well as tools that are in the holes and pin holes can be installed to carry out various types of work. • The hydraulic system can be adjusted with the help of the pressure and flow adjustment valves can be regulated, which is the pressing force and the speed of the press influence. The press is equipped with a built-in manometer. • The control panel is used to operate and display the piston stroke and for Choice between manual or automatic operation, and the HB-28 model is also with a built-in memory for up to 4 different programs fitted. • Operation is via electric foot pedals. • The Profi Press HB-28 model can be equipped with various optional accessories hearing parts and tools for installation on the workbench and the Tool holder to be delivered.

Year of construction: 2017, operating hours: 3,871 h, condition: ready for operation (used), This Engel E-Duo 740H-740L-700 combi was manufactured in 2017. A robust hydraulic injection moulding machine, it features a system size of 8.5 m x 2.5 m x 2.5 m and a total weight of approximately 20,000 kg. It includes dual 3-zone screws and 32 hot runner control circuits. Consider the opportunity to buy this Engel E-Duo 740H-740L-700 combi. Contact us for more information. Dsdpfoxf N I Esx Adkjku Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2010, operating hours: 71,134 h, Injection Unit Screw diameter 30 mm Clamping Unit Clamping force 80 t This Arburg 470 A 800-170 was manufactured in 2010. A hydraulic injection moulding machine with a closing force of 80 tons and a screw diameter of 30mm. Operating on 400V 3~, 50Hz with a total connected load of 75kW. Consider the opportunity to buy this Arburg 470 A 800-170 hydraulic injection moulding machine. Contact us for more information. Application Types Dodjxirf Iopfx Adkoku Injection Moulding

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,200 h, Injection Unit Screw diameter 60 mm Injection pressure 2006 bar Clamping Unit Clamping force 200 tons expandable to 300 tons Opening stroke 700 mm Mould height max 350 mm Additional Equipment Hydraulic ejector Side air valve Robot interface 4-zone mold temperature control system This Krauss Maffei KM 200 CX 1400 MC5 was manufactured in 2008. It features a clamping force of 200 tons, expandable to 300 tons, and a screw diameter of 60 mm. The machine includes a hydraulic ejector, side air valve, robot interface, and a 4-zone mold temperature control system. If you are looking to get high-quality injection molding capabilities, consider the Krauss Maffei KM 200 CX 1400 MC5 machine we have for sale. Contact us for more information. Application Types Dsdpfx Adsw Ailbskoku Injection Moulding

Condition: ready for operation (used), Year of construction: 2011, Injection Unit Screw diameter 45 mm Injection pressure 2116 bar Clamping Unit Clamping force 1500 kN Opening stroke 300 mm Dodexg Uikjpfx Adkoku This Battenfeld VM 150/750V R1520 UNIGLOG B6S was manufactured in 2011. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Battenfeld VM 150/750V R1520 UNIGLOG B6S. Contact us for more information. Application Types Injection Moulding

Year of construction: 2005, operating hours: 92,980 h, condition: ready for operation (used), This Engel Victory 750/200 Tech hydraulic injection moulding machine was manufactured in 2005. Consider the opportunity to buy this Engel Victory 750/200 Tech hydraulic injection moulding machine. Contact us for more information. Dedpfxjxd H R Uo Adkoku Application Types Injection Moulding

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 4500 Kg This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Dkjdpfx Adoxaqi Tokou Application Types Bending

Condition: ready for operation (used), Year of construction: 1999, operating hours: 1,41,047 h, General Data Machine weight 12500 Control Unit Brand KRAUSS MAFFEI Model n/a Clamping Unit Clamping force 300 t Dksdpfx Aswnkcxjdkeu This Krauss Maffei 300-1900 C1 was manufactured in 1999. A hydraulic injection moulding machine with a clamping force of 300 tons and a screw diameter of 70 mm. It has a working capacity of 1,900 cm3 and weighs 12,500 kg. Consider the opportunity to buy this Krauss Maffei 300-1900 C1 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,717 h, Main Drive Number of axis 3 Dedpfx Adoxf N Ryskjku Clamping Unit Clamping force 1600 KN Additional Equipment Includes enclosure with clean air supply FilterFanUnit, removal robot, enclosure as shown in the pictures This 3-axis Arburg Allrounder 520S-1600-400 was manufactured in 2016. It features a force of 1,600 KN and includes an enclosure with a clean air supply FilterFanUnit, a removal robot, and operates on 400 V∼3∼50 Hz. Ideal for precision hydraulic injection moulding, consider the opportunity to buy this Arburg Allrounder 520S-1600-400 hydraulic injection moulding machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Clamping Unit Dkjdpfx Adoxf N R Hsksu Clamping force 1300 / 1600 / 2000 kN Additional Equipment Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 2000 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Application Types Injection Moulding