Used Hydraulic Straightening Press for sale (26,905)

Condition: good (used), Year of construction: 1991, We are selling our Hydrap 160-ton press. We urgently need the production space for a new product and are therefore reducing the already attractive price to "€5,000" for this valuable press (dismantling by the buyer). Operating hours: 20,242 Condition: good Inspection is possible and welcome. Codpfotu Szlsx Aizsri Location: Szügy / Hungary We will gladly answer any questions you may have and discuss the next steps.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, PLEASE READ CAREFULLY!!! THIS OFFER IS EXCLUSIVELY FOR EUROPEAN END CUSTOMERS, AND THE FIRST INQUIRY MUST INCLUDE COMPLETE CONTACT INFORMATION. THANK YOU. The forging line consists of a hydraulic 1500-ton forging press, an induction unit with 1200 kW, and a robot with a load capacity of 300 kg. So far, prototypes have been manufactured; however, the line was actually designed for series production, which has not yet taken place. The line was built and installed in 2023. The technical specifications are as follows: Hydraulic press 1500 tons (year of manufacture 2023) SIEMENS control system - Pressing force: 1500 tons - Retraction force: 120 tons - Downward stroke: 300 mm/s - Pressing stroke: 100 mm/s - Upward stroke: 300 mm/s - Installation height: 3,000 mm - Ram stroke: 1,500 mm (!) - Ram size: 1,600 x 1,600 mm - Table size: 1,600 x 1,600 mm - Ejection force / 1 position: 40 tons - Stroke: 600 mm - Ejection speed: 250 mm/s - Return speed: 250 mm/s - Stroke: 400 + 400 mm - Traverse speed: 200 mm/s - Ram positions: 3 positions Including a 1200 kW induction unit (year of manufacture 2023) MITSUBISHI control system - 1200 kW / 450 Hz induction unit for billets - Coil size: Ø 215 / Ø 150 mm, two sets of coils - Material feeding system Including a Kawasaki robot (6 axes) – Model: ZX300S-D- (year of manufacture 2023) - Max. load capacity: 300 kg - Max. reach: 2500 mm Credjzvnpiopfx Aizoi Sample images of the machines are attached.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm Cjdpfszp Ex Uex Aizjri - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: new, Year of construction: 2027, functionality: fully functional, 3-axis straightening press Codexpfdkjpfx Aizjri Pressing force 400 tons Table area 6500 mm x 3000 mm Clear working width 3300 mm Stroke 1000 mm Installation height 1200 mm Table plates bolted together Control system: Siemens S7-1500 series PLC Bosch-Rexroth hydraulics Siemens servo drives

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Cjdpfxsz Rk Nyj Aizori Manufacturer: Gantenbein, Switzerland

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t Crodpfxjfh Izme Aizoi stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Daylight Opening:1100 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table Crjdpfezktg Ajx Aizei • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Crjdpfx Ao Ad Hmgeizoi

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Crsdpfoxwlvpsx Aizoi Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Can send a video of the machine, via whatsapp application

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Schoen Type: SH/LF100 Year of manufacture: 1985 Machine type: Hydraulic press PRESS Pressing force: 100 t Table dimensions: 1,200 × 1,200 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Credpj Adu Ryjfx Aizei Length: 3,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 12,000 kg

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Csdpo Ah Sk Iofx Aizsri Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 540 h, pressing force: 1,000 t, stroke length: 800 mm, reverse speed: 150 mm/s, table width: 2,300 mm, table length: 3,000 mm, total length: 4,500 mm, total width: 3,500 mm, total height: 6,000 mm, overall weight: 1,01,000 kg, working height: 1,300 mm, working range: 1,300 mm, Hydraulic press 1000t - in very good condition, used for stamping first series parts from progressive tools Crodpfxoyilh Is Aizei -we bought this maschine as new for 340 000 EUR in year 2019

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. Csdpjv E Efdjfx Aizeri New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine BACK GAUGES Crodpfx Asz Sva Hsizsi - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Credpfx Aio Agxfgezoi Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Codj Aa Ndyspfx Aizeri General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. Credpfxjv E Nlzs Aizoi New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1980, operating hours: 1,23,45,678 h, functionality: fully functional, total height: 3,400 mm, input current: 32 A, total length: 2,200 mm, total width: 900 mm, overall weight: 6,000 kg, power: 32 kW (43.51 HP), input voltage: 380 V, pressing force: 200 t, clearance between the columns: 800 mm, oil tank capacity: 400 l, stroke length: 500 mm, table length: 700 mm, table height: 980 mm, table width: 800 mm, 200-ton press from Rapp&Seidt, high-speed model, with core lifting device for intermediate plates and external hydraulic unit. Heated platens (drawing cushions) with electric heating, 25 amps each, top and bottom. Platen size 550x550 mm, central ejector. The machine operates smoothly and maintains pressure. Very little oil leakage. The machine is available immediately. Cedpj Agvxbjfx Aizori

Condition: good (used), Year of construction: 1997, functionality: fully functional, oil tank capacity: 220 l, pressure: 300 bar, ID43737 Year: 1991-1997 Press machines with capacities from 60 tons to 80 tons Brand: Hydro-Presses 2 units with 60 ton force PH600 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 60 tonnes at 300 bar Codpfewhcmpex Aizsri 5 units with 80 ton force PH800 Hydraulic cylinder stroke: 600 mm Maximum hydraulic cylinder force: 80 tonnes at 300 bar

Condition: new, Year of construction: 2026, machine/vehicle number: YC27-200T, functionality: fully functional, pressing force: 200 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 140 mm/s, table width: 940 mm, table length: 740 mm, table height: 750 mm, throat depth: 400 mm, overall weight: 14,000 kg, Equipment: CE marking, documentation/manual, Digima YC27-200T Single-Column Press Hydraulic C-frame press with a 200-ton capacity for metal forming. The Digima YC27-200T is a modern, hydraulic single-column C-frame press designed for a wide range of metal forming processes. This machine is suitable for cutting, blanking, bending, light stamping, straightening shafts, and processing components requiring very high clamping forces. The C-frame design provides convenient access to the work area from three sides, facilitating material handling, workpiece positioning, and tool changes. The welded steel frame ensures high rigidity, minimizes deformation under load, and supports process repeatability. Key Advantages Why choose the Digima YC27-200T press? 200-ton capacity — very high working force for blanking, bending, stamping, and straightening components. C-frame design — access to the work area from three sides simplifies operation and tool changes. Welded steel frame — high rigidity, reduced deformation, and stability under load. Integrated valve block — compact hydraulic system design and rapid machine response. Fully enclosed drive — increased work safety and easier machine maintenance. Intuitive operation — lever-pedal system and control panel support comfortable operator use. Applications Where will the YC27 hydraulic press be useful? The Digima YC27-200T single-column press is designed for use in production facilities, tool rooms, maintenance departments, and industrial workshops where high clamping forces, convenient workpiece positioning, and a repeatable work process are required. Bending and forming — processing metal components using appropriate tooling. Blanking and cutting — working with parts requiring high, controlled clamping force. Light stamping — application in metal component forming processes. Straightening shafts and components — correction of machine components and technical parts. Tool rooms — assembly, fitting, testing, and servicing of production tools. Industrial production — repetitive operations with stable and safe working conditions. Technical Specifications: Model: YC27-200T Machine type: Hydraulic single-column C-frame press Nominal capacity: 2000kN/200ton Motor power: 18.5kW Maximum system pressure: 25MPa Stroke adjustment: 10-180mm Maximum slide stroke: 180mm Maximum mounting height / clearance: 80-380mm Table height from the ground: 750mm Slide dimensions: 770x580mm Crjdpfxjz Ari To Aizoi Table opening: 250mm Mounting hole: Ø70 mm Throat depth / outreach: 400mm Fast descent speed: 21 mm/s Working speed: 8mm/s Return speed: 140mm/s External machine dimensions: 1800x2100x3600mm Machine weight: approx. 14000kg Type: Press Brand: Digima Condition: New Main application: Cutting, blanking, bending, light stamping, straightening shafts and components.

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 100 t, stroke length: 320 mm, operating speed: 35 mm/s, reverse speed: 380 mm/s, table width: 560 mm, table length: 710 mm, table height: 850 mm, throat depth: 320 mm, distance table to ram: 460 mm, oil tank capacity: 365 l, total length: 1,200 mm, total width: 3,200 mm, total height: 2,800 mm, overall weight: 8,500 kg, Oilhydraulic gap press, YOP 1990, control SIEMENS, capacity 100 to, return power 10 to, motor 15 KW, throat depth 320 mm, stroke 320 mm, table size 710 x 560 mm, table bore Ø 110 mm, table high 850 mm, rapid feed, hydr. ejector 20 to, hydr. die cushion 10 to, Hydro strip feed device Keller typ HVP-SIG 2 with control, decoil hauling winch SOPREM, weight ca. 8500 kg Cedjz Itdtepfx Aizori

Condition: good (used), functionality: fully functional, PYE 100 S/1M hydraulic press Crsdpfxo Afbvlo Aizoi

Condition: excellent (used), Year of construction: 1985, For sale: MÜLLER HEP 10.20.35 hydraulic press, manufactured in 1985. The press was in very good working condition until recently. It underwent an inspection in 2023. Crsdpfx Aioz Saqqozoi

Year of construction: 1992, condition: used, Hydraulic Press Manufacturer: HYDRAP Type: HP SK 40 Year of manufacture: 1992 Technical details: Pressing force: 40 t Effective stroke: 500 mm Drive power: 17 kW Overrun distance: 48 mm Overrun time: 110 ms Safety distance: 176 mm Condition: Used Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Crsdozdvcaspfx Aizoi

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, pressing force: 5 t, operating speed: 300 mm/s, table width: 450 mm, table length: 320 mm, throat depth: 180 mm, oil tank capacity: 9 l, overall weight: 270 kg, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Cedpfxovbdpyj Aizsri Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920