Used L Lathe for sale (28,912)

Condition: used, Hydr. scissor lift table TREPEL - L. A. VAN EIJLE & Co. Year of construction approx. 1980 Load capacity approx. 5 ton. Platform size 1700 x 1100 mm Lift max. 515 mm Lower table height with rail rollers 535 mm Table height without rail rollers 480 mm Table height raised with rail rollers max. 1050 mm Table height raised without rail rollers max. 995 mm Travel speed rail trolley approx. 8.5 meters/min. Motor power 4 kW Mains connection 400 Volt, 50 Hz - Manual button for up and down on the cable - Safety limit switch - Hydraulics with tank mounted in the undercarriage - Lifting scissors with two lifting cylinders - The table could be moved on rails, 4 rollers on the base frame, Ø 200 mm - Rail rollers driven by SEW geared motor with chain Space requirement L x W x H 2070 x 1350 x 1050 mm Own weight approx. 1.3 tons. good condition Csdpfx Abjd I Nrps Sohc

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Openwork Stackable approx. 260 pieces available for further questions please contact me Csdpfxogh Hu Uo Ab Sehc

Condition: used, • Length 2000 mm • Width 800 mm • Height 1000 mm • Approx. 100 pieces • Price on request Cedpfx Ajw E Ezqsb Sjhc

Condition: used, Year of construction: 2014, SPX/ SEITAL SE 355 BX is a Dairy Bacterial Remover Centrifuge. This machine was initially I purchased by a Dairy that changes there equipment every 10 Years. The dairy was the first owner of this machine and has internal engineers providing all services on time, keeping the machine in excellent condition and providing all needed attention on time. The machine was working until September 2024 and was replaced due to new machines being installed for a larger capacity. The Bacterial Remover Separator is used for various reasons and one of these is for cheese producers as the bacteria does not allow the cultures to act in the correct manner. Removing the Bacteria’s will ensure a longer shelf life of fresh milk and also correct reactions on the cultures. Capacity: 10,000 L/h Controls: Included Tools: Included Stainless steel skid: Included Water system and pump: Included Manuals: Included Machine condition: Excellent Chedpfxeuruh Dj Ab Sjc

Year of construction: 2008, condition: excellent (used), machine/vehicle number: MBMA12/19, Technical data: 1x Demag KBK 1 column slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Height: approx. 3.55m UK boom: approx. 3.05m Projection: 3m Hook height: approx. 2.65m Cedpfx Aerhzgfob Sshc Total weight approx. 600KG including dowel plate 55x55cm with 125KG Demag chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice!!! Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Year of construction: 2018, condition: ready for operation (used), Various machines from a print shop are available. 1) Saddle stitcher Brehmer ST 300, year of manufacture: 1999, with 6 stations, UFA and trimmer. Including extensive spare parts. 2) GUK FA 36-4 buckle plate folder, year of manufacture: 1998, with SAF. Including extensive spare parts. 3) Buckle plate folding machine GUK FA 52/4-4K, year of manufacture: 1988, with 4-pocket cross-fold unit. Including extensive spare parts. 4) Universal eyelet stitching head Hohner 52/8 S, factory overhauled. 5) Theisen & Bonitz TB-Sprint 325 VP gathering machine, year of manufacture: 1991, with 25 stations. 6) Ludden & Mennekes STV 1200 compaction system, year of manufacture: 2018. 7) Nagel Multinak S booklet and block stitching machine. 8) Affeldt SA 12 film sealing machine, year of manufacture: 1994, including 2 pallets of film. Control defective. 9) RIMA RS-10S compensating stacker with delivery belt. 10) Strapex STF automatic package strapping machine, year of manufacture: 2002. 11) Cyclop GL215 pallet film wrapper, semi-automatic with turntable. 12) Dürselen PB 01 paper drilling machine, year of manufacture: 1993, with 4 spindles. 13) Grafotec Lega 30/55 press stack delivery, year of manufacture: 1991. 14) RIMA System RS 220 corner deflector, suitable for cannibalization, part of the control system missing. 15) IBICO EPK-21 plastic spiral binding machine. 16) Habasit PT-103/8 belt hot-pressing device, new and in original packaging. 17) Regu Binder pleating belt machine. Including pleating belt. 18) Self-made roll unwinder, solid construction. 19) Perforating machine from E. Bickel. On-site inspection is possible. Only a package sale is possible. Codpfxjwhp Nwo Ab Sjhc

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Codpfjdzqb Esx Ab Sjhc Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: new, Year of construction: 2025, Vacuum mixer is designed for mixing crushed meat. Due to the freqency regulator to achieve speed control. The microprocessor control is by German company ADITEC. The working part is with spiral shape and paddles. TECHNICAL DETAILS: Csdpfowq D Rbjx Ab Sehc MODEL BM 300 Working volume 300 L/ 220 kg Instaled Power 3 kW Shafts speed frequency regulator Kind of shafts paddle Unload front valve Power 380 V 50 Hz Air power 6 bar L x B x H 1310 x 920 x 1500 mm.

Condition: good (used), functionality: fully functional, Table milling machine with 2 milling spindles, fully functional, including feed unit. Chsdpfx Abowz I Nve Ssc

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 070220122, cooling capacity: 106.6 kW (144.94 HP), type of input current: three-phase, type of cooling: water, overall weight: 11,000 kg, input voltage: 400 V, pressure: 6 bar, volume flow: 297.5 m³/h, frequency: 50 Hz, total width: 2,250 mm, total length: 11,200 mm, total height: 2,330 mm, power: 106.6 kW (144.94 HP), input current: 173 A, operating pressure: 25 bar, net weight: 11,000 kg, Equipment: compressor, type plate available, Working chiller dismantled in week 31 of 2025 Used at a plastics injection moulding company Machine fits only in a 40-foot container Refrigerant: R407C Number of fans: 18 Number of compressors: 2 Chsdpjw Hbp Tjfx Ab Sec Loading costs on request Compressor brand: Bitzer Condenser: aluminium/copper Water pump brand: Grundfoss

Year of construction: 1996, condition: excellent (used), machine/vehicle number: 2000/9993, Technical data: 1x Demag KBK 2 column jib crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125 ton payload Chedpjv A Sfljfx Ab Soc Height: approx. 3.55m UK boom: approx. 3.05m Range: 5m Hook height: approx. 2.7m Complete weight approx. 800Kg incl. dowel plate 88x88cm with Demag DK chain hoist 125Kg chain hoist incl. bolt, cable carrier, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and immediately available Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only after appointment

Condition: excellent (used), I will sell a column crane + winch. Chodpfx Abjwd Ul Ne Soc - Total length 525cm/working 490cm.

Condition: used, Foot switch, safety foot switch, foot pedal, foot controller, foot remote controller, pedal controller -Manufacturer: L-TEC, foot controller type FC-4 -Connector plug: 5-pin -Total dimensions: 300/155/H190 mm Cedpfx Aehu Sumjb Sehc -Weight: 4.2 kg

Condition: ready for operation (used), functionality: fully functional, Small manual Turning-machine/Lathe 1IC611V with quick locking collet chuck. With Machine 4 collets. More collets is possible to buy, ~25EUR/pc. Cedpfswbdmkox Ab Sehc

Condition: good (used), functionality: fully functional, Stainless steel tank in good condition Chedpfjv A Twvjx Ab Sec dimensions width 4 m height 7 m Country of origin Italy

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L manipulator handling device lifting aid Payload at full radius 12+15KG Height: approx. 3.3m UK boom: approx. 3.2m Projection: approx. 1.50+1.50m = 3m Weight completely approx. 300kg with gripper and operation Height: approx. 2.7m UK boom: approx. 2.6m Projection: approx. 1.40+1.40m = 2.8m Chjdpfxopwgrfj Ab Soc Weight completely approx. 300kg Bfor7sx3woe without gripper and operation Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim See pictures Shipping by courier or collection only by appointment

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack Cjdpfx Abof Tdt Is Sshc -Manufacturer: HL, hydraulic unit for hydraulic punch -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW/1455 rpm -Nominal pressure: bar -Liter output: l/min -Pressure display: up to 250 bar -Pressure accumulator: Hydac 2.5 liters -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Condition: good (used), Used in good condition 4 pieces in stock Cedpfx Absvt Szzs Sshc

Year of construction: 2008, condition: excellent (used), machine/vehicle number: NE151/91, 1x Mobile traveling crane Column-mounted slewing jib crane Traveling crane Type Vetter Mobilus 2,5-3.0 BJ 2008 Payload at full outreach 250 KG / 0.25 tons Overall height: approx. 2.75m, outreach: approx. 3m Hook height: approx. 2.15m, lower edge of boom 2.3m Column with counterweight incl. chain hoist, cable tow and accessories with Demag DC chain hoist Weight complete approx. 2700 kg Connection to 400V, swivel range 360 Very good condition, fully functional. Codpfx Asrwkahob Sjhc Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale See pictures Shipping by forwarding agency or pickup

Condition: used, hydraulic unit, hydraulic pump, hydraulic pump -Max. Pressure: approx. 200 bar Cedeb Uhqdjpfx Ab Sohc -Litre capacity: approx. 6 l/min -Hydraulic tank: liters -Hydraulic valve: -Dimensions: mm -Weight: 36kg

Year of construction: 2008, condition: excellent (used), machine/vehicle number: NE294/90, 1x Mobile traveling crane Column-mounted slewing jib crane Traveling crane Type Vetter Mobilus 2,5-3.0 BJ 2007 Payload at full outreach 250 KG / 0.25 tons Overall height: approx. 2.7m, outreach: approx. 3m Hook height: approx. 2.1m, lower edge of jib 2.5m Column with counterweight incl. chain hoist, cable tow and accessories Chedpfjrwka Nsx Ab Sjc with Demag DC chain hoist Weight complete approx. 2700 kg Connection to 400V, swivel range 360 Very good condition, fully functional. Item location is 75053 Gondelsheim Only the crane system shown in the pictures is for sale See pictures Shipping by forwarding agency or pickup

Year of construction: 1989, condition: excellent (used), machine/vehicle number: RES-RIO, Technical data: 1x Demag KBK 2 column-mounted slewing jib crane NL 500KG with Demag PK2 chain hoist (Fig. shows DK chain hoist) 5 identical cranes are available !!! Payload at full radius 500KG / 0,5to payload Height: approx. 3.55m Lower boom: approx. 3.05m Outreach: 3m Hook height: approx. 2.55m Weight complete approx. 550KG Dowel plate 40x40cm with 500KG Demag PK2 chain hoist incl. bolts, cable drag, trolley, end cap etc. Swivel range 300°, connection to 400V 16A Crane is disassembled and immediately available Item location is 75053 Gondelsheim There are more cranes available, lifting capacity 80-5000Kg, please inquire Chedpfju Rn I Nox Ab Soc See pictures Shipping by forwarding agent or collection by appointment only

Year of construction: 1979, condition: used, machine/vehicle number: RS82/12, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with PK chain hoist Payload at full reach 250KG / 0.25 tonne payload Height: approx. 3m UK boom: approx. 2.5m Reach: 3m Hook height: approx. 2m Complete weight approx. 350Kg with chain hoist 250Kg chain hoist incl. bolt, cable drag, chassis, end cap etc. Chsdpfovv N Auox Ab Sjc Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: Ross10-MB, Technical specifications: 1 Vetter / Liftket pillar-mounted jib crane, NL 500 kg with Liftket chain hoist Type PS5-4.0 Payload at full radius: 500 kg / 0.5 tonne payload Height: approx. 4.5 m Lower boom length: approx. 3.7 m Outreach: approx. 4.5 m Hook height: approx. 3.3 m Complete weight: approx. 800 kg including base plate 105 x 105 cm with Liftket chain hoist, 500 kg Codpfx Abjwgwbrs Sehc Slewing range: 270°, connection to 400 V 16 A Crane is disassembled and immediately available Item location: 75053 Gondelsheim Other cranes are available, load capacities 80-5000 kg, please inquire. See pictures Shipping via freight forwarder or pickup by appointment only

Year of construction: 2016, condition: like new (used), machine/vehicle number: MBUT M2, Technical data: Binar Quick Lift QLA 50i Manipulator Handling Device Lifting Aid Chedpfjpgmfiex Ab Soc Payload at full extension 50KG Height: approx. 3.4m UK boom: approx. 3.2m Projection: approx. 1.30+1.50m Lifting height: approx. 1.0-2.1m Weight completely approx. 300kg with scissor pliers for removing small parts Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment