Used Large Kitchen for sale (9,096)

Condition: used, Year of construction: 1993, machine/vehicle number: 4803678, overall weight: 11,200 kg, Equipment for washing industrial tanks under high pressure. KONGSBERG OFFSHORE, LARGE UMBILICAL REEL 37 LINE, serial number 01. Lrodovyfmqspfx Afzow

Year of construction: 2008, condition: ready for operation (used), A large format plotter ROWE RCS 6000-4 with a longitudinal and cross folding system ROWE ROWEFOLD 721-4 and a sorter, counter reading: 170,000 linear meters/ 97,000m². Ljdpfx Afepy Eu Hezerw

Condition: good (used), Large-scale system for climate tests with S!MCON control Design The system consists of the following main components: - Walk-in, insulated test room - Air treatment room - Machine unit - Air conditioning system - Control cabinet Test room The fixtures in the test room are made of corrosion-resistant material. The test room can be illuminated, is walk-in, and has a condensate and cleaning drain. Air treatment room The air treatment room is located behind the air baffle in the insulated interior. It contains the following components necessary for temperature control and is accessible via easily removable panels. - Test room fans - Heat exchangers - Electric heaters - Ventilation and exhaust system - Temperature sensors In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified, and circulated by fans. Lredjw U Sv Espfx Afzow The air is drawn in under the ceiling and expelled at floor level. Sensors The temperature and humidity sensors are located behind the air baffle in the air treatment room. Machine Unit The machine unit, consisting of refrigeration units, supplies the air treatment room with the required energy. Climate System The climate system consists of: - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temperature fluctuation over time in the center of the usable space: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climate testing Temperature range: 10 to 95°C Humidity range: 10 to 95% RH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5°C Humidity fluctuation: +/- 3 to +/- 5% RH Cooling water specifications Connections Inlet: 2 x 1 1/2" RH Return: 2 x 1 1/2" RH Consumption at full load: max. 16 m³/h Maximum load on the test chamber floor: 10,000 N/m² Nominal voltage: 3/N / PE AC 400 V 50 Hz Nominal power: 97 kW Nominal current: 148 A Dimensions: Test chamber: Width 3.60 m, Height 2.20 m, Depth 5 m Climate chamber divided for transport at a specified location (approx. 2.50 m). Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Lrsdody Hm Nspfx Afzew Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: used, Large load carrier Thorpak Lsdpfxow R Tqij Afzerw Type: Thorpak 1612; base area 1.6m x 1.2m Type: Thorpak 1210; base area 1.2m x 1.0m The stated price refers to larger quantities of the smaller variant Several units of each version available

Condition: used, functionality: fully functional, In this offer you buy a used large format printer/plotter ‘Roland TrueVis VG2-540’ Object of sale: 1 x Roland TrueVis VG2-540 with the following equipment: incl. colours: Black, cyan, light black, magenta, light magenta, orange, yellow incl. cutting function Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). Ledpfsu Tc A Dox Afzorw (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: new, Year of construction: 2025, Sandwich conveyors Do you need to transport bulk material vertically UP or DOWN? Or at an angle greater than 45 degrees? Or all of this at the same time? Is the elevator not suitable for you? For example, the MATERIAL IS TOO LARGE (+40 mm)? Does the material STICK and get stuck in the buckets? Or even permanently DAMAGE THE BUCKETS? Lrjdpfxewrt N No Afzow SANDWICH-CONVEYORS are a KNOW-HOW, a NEW TYPE OF CONVEYOR, DEVOID OF THE SHORTCOMINGS of its competitors. - conveyor capacity from 50 to 10,000 t/h. - conveyor length from 10 to 5000 m. - conveyor angle from 0 to 90 degrees. - material size from 0 to 500 mm. - conveyor belt can have a complex trajectory - turn up/down, right/left. - regular smooth conveyor belt is used - it is possible to transport sticky material and clean the belt well after unloading. Z-conveyors Z-conveyors have an almost infinite number of variations. The capacity, the route, the complete conveyor can be varied. The range of applications for these machines is also very wide. But, it is most relevant and expedient to apply such conveyors where: - the use of a high angle material lifting solution is advantageous; - a combination of transport sections at different angles to the horizon is required; - no possibility to install supports for the inclined part of the conveyor (supports only at the beginning and end of the conveyor) Conveyors of this type are an excellent tool for simplifying and optimizing the conveying chain. Contact us and we will help you to apply this solution correctly! - conveyor capacity from 100 to 2,000 t/h. - conveyor length from 5 to 500 m. - conveyor angle from 0 to 90 degrees. - material size from 0 to 100 mm.

Condition: used, Year of construction: 1992, machine/vehicle number: 209, Automatische Fadenheftmaschine - Automatic Sewing machine - Large Size Smyth F 150 LYear 1992 - Serial-No. 0209 Signature size min. 80mm - 135mm Signature size max. 560mm - 340mm Number of Stitch 13 Mech. Speed up to 150 cycles/min. Online-Video-Inspection by Skype-Video Lodpfeh Axawsx Afzorw We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: like new (used), GIF Kitchen Ventilation Ceiling Ventilation Ceiling System Kitchen ventilation for commercial kitchens Lrsdpfxot Hglko Afzew The optimal solution for kitchen ventilation, commercial kitchens, and the food industry. The best alternative to extractor hoods GIF kitchen ventilation ceilings are installed in: • Company canteens • Hospitals, clinics • Restaurants / hotels • Retirement homes, homes for the disabled, and children • Military accommodations, field kitchens • University cafeterias, school kitchens • In-flight catering • Correctional facilities • Public facilities Patented quality – Made in Germany The GIF kitchen ventilation ceiling is a complete, wall-to-wall, surface-active solution including large-area exhaust and supply air panels, lighting, and compensation surfaces with an installation height of just 200 mm. The use of the ceiling cavity as a pressure chamber in accordance with VDI 2052 enables implementation as an "open" or "closed" system, always maintaining the largest possible proportion of air-active surfaces. The large-scale capture of frying, cooking, and other fumes, as well as the large-scale, low-turbulence supply air intake, guarantee a comfortable climate free from condensation and drafts. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. The unique modular system offers maximum transparency and hygiene thanks to its fully reversible design. On the supply air side, the GIF active cassette ceiling is used for low-turbulence, large-scale supply air intake according to the stratified flow principle. An energy-efficient solution is thus standard. The special design ensures indirect supply air guidance, even for high air volumes at low inlet velocities, without an induction pulse. Since the active cassettes are identical in the exhaust and supply air areas, they can be interchanged at will. Facts and Benefits Complies with or exceeds current guidelines (VDI 2052, VDI 6022, EN 16282), including accessibility to underlying components (no access openings required). Durability of the material: CNS 1.4301 Integrated deflection system for rapid pulse reduction Economical and hygienic cleaning of only 4 parts per m² in the dishwasher Pulling and pushing of the active cassettes in the support profiles makes them easy for anyone to remove without tools Partial cleaning possible as needed No need to climb onto greasy, hot kitchen appliances (risk of slipping) HACCP-certified process Technical Specifications Exhaust Air Air flow rate: 260-300 m³/h m² Separation efficiency: up to 97% Dimensions: 500×485 mm Pressure drop: 20-25 Pa Material/Surface: CNS Material No. 1.4301 Weight per m2 without support structure: 10.00 kg Draft air flow: 360-500 m3/h m2 Dimensions: 500×485 mm Pressure drop: 25-30 Pa Material/Surface: CNS material No. 1.4301 Weight per m2 without support structure 10.00 kg Airflow velocities: less than 0.2 m/s Ceiling area: 6500 x 3000 mm 19.50 m² 300 supply air flat ceilings, 250 x 485 mm 200 supply air flat ceilings with sound absorption, 250 x 485 mm 220 active cassette ceilings, 500 x 485 mm 14 system support profiles, 6500 mm 7 system support profiles, 2000 mm Lighting fixtures installed flush with the ceiling in the GIF ventilated ceiling Further items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2013, A 12-picoliter roll-to-roll UV inkjet printer Durst with Variodrop technology is available. Print width: 5000mm, max. material thickness: 2mm, max. material width: 5200mm, max. print speed: 350m²/h, resolution: 900dpi, nozzles: over 30000, max. roll weight: approx. 270kg. Machine dimensions X/Y/Z: approx. 8500mm/2200mm/2100mm, weight: approx. 7000kg. Documentation available. On-site inspection is possible. Lrodpow Az Sajfx Afzjw

Condition: good (used), Year of construction: 2011, Universal tipper suitable for large and tall boxes, dimensions shown in the photos. Ljdpfowynlbsx Afzorw

Condition: excellent (used), The digital printer provides the highest print quality thanks to the LED UV curing system and eight 6th generation Ricoh printheads with CMYK +2x WHITE + 2x VARNISH configuration. The machine allows you to print at a speed of 30 m2/hour on items, i.e.: -> ceramics; -> PVC boards -> corrugated cardboard or plastic. The maximum printing width on an item is 2500 mm. The plotter is equipped with RIP ONYX Software, Panasonic servomotor and TAIWAN HIWIN linear motor. Specifications of the YC2500HR large format printer - type of carrier: PVC, metal plates, glass, wooden boards, acrylic, ceramics, wallpaper, corrugated cardboard, plastic - RIP software: ONYX Software - printheads: Ricoh 6th generation - number of printheads: 8 - head configuration: CMYK + 2x WHITE + 2x VARNISH - maximum printing width: 2500 mm - printing resolution: 300*900 dpi, 600*600 dpi, 600*900 dpi, 600*1200 dpi - printing speed: 30 m2/hour - type of ink: UV ink - curing system: LED UV - saving format: TIFF, JPEG, Postscript, EPS, PDF Lrjdpfx Afemrqy Uozjw - X-axis drive: TAIWAN HIWIN linear motor - servomotor: PANASONIC - YC2500HR printer guide: JANPAN THK - encoder: Metal Renishaw UK - USB interface: 2.0/3.0 - input voltage: single phase: 220V ± 10% (50/60 Hz, AC)

Condition: used, Magnet coil, electromagnet, pull magnet -Ritz: type UIRK 290 -Connection: 0.72/3/- kV 50 Hz 1 VA -Price: per piece -Number: 3x available -Dimension: Ø 355 x 30 mm Ledjfk Udyopfx Afzerw -Weight: 3.1 kg

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design Lrjdopm U U Nspfx Afzjw SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Year of construction: 2021, operating hours: 50 h, condition: good (used), functionality: fully functional, machine/vehicle number: 221013, max. load 100kg Lredpfx Aovf Nhvofzjw Tools for barrels and drums Forklift movable ATEX version

Condition: used, functionality: fully functional, In this offer you purchase a used accessory ‘Konica Minolta LS-506’ Object of sale: 1 x Konica Minolta LS-506 large capacity stacking tray: Fits various Minolta production machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Ljdpjv R Tu Rsfx Afzorw The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2015, condition: new, Poste of approx 240 stuk cooker hood New, all original packed per stuk Lredpfx Aed Nq Tmefzsw 3 stands extraction Price per piece, min. purchase 60 pieces

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Ledpfxsw D Uggs Afzerw

Condition: used, Desposer kitchen waste disposer, waste shredder, garbage chute Lrodpfx Asb A Hp Ijfzew -Power: 0.75 kW -Voltage: 230/460 V -Speed: 1725 rpm (60Hz) -Connection: Ø 140 mm -Number: 2x available -Price: per piece -Dimensions: 230/H440 mm -Weight: 20 kg

Year of construction: 2017, condition: new, functionality: fully functional, 2 TIP TIG WIG 500i ACDC/HW 160i Extreme case version units, complete with hot wire power source, water cooling, wire feeder, and Ljdpfx Afewa S Tiozerw each with 1-1 TIP TIG DV Extreme case version remote control units. TIP TIG WIG 500i ACDC HW 160i Extreme case version intermediate cable package. TIP TIG remote control (TIP TIG manual DV and welding current control 5-500A) TIP TIG remote control cable 5m TIP TIG remote control storage box TIP TIG transport frame, Extreme case, complete TIP TIG ground cable 500A 10m TIP TIG cable package HW TW 18 SC 4m, Teflon core, orange TIP TIG spare parts box L large, HD / KD 18 SC, gas lens Jumbo TIP TIG adapter DIX KAB 70/95 (all unused) 2 TIP TIG handheld hot wire welding systems complete with wire feeder and each with 1-1 FRONIUS Magic Wave 5000 Job G/F as a water-cooled power source TIP TIG High Speed Edition Handheld HD/KD (hot wire/cooling wire) TIP TIG HD module TIP TIG connection cable 1.4 m TIP TIG intermediate hose package FRONIUS, 3 m TIP TIG hose package HD, interchangeable torch 18 HC, 7 m, orange Teflon core TIP TIG spare parts box large, interchangeable torch 18 HC TIP TIG adapter DIX KAB 70/95 (all unused) 4 TIP TRIMMER combi 230V 50/60Hz (demonstration models) Total new price: €98,358.49 net Used price: €49,180.00 net

Year of construction: 2004, condition: excellent (used), Year: 2004 X axis:50″ Y axis:26″ Lsdpfoh Uqkyjx Afzsrw Z axis:25″ Motor Power:40 hp Spindle speed Rpm:7500 RPM Atc: 24 Spindle Taper: CT 40 Table width: 23″ Table length: 52″ Swarf auger Coolant tank 4th axis

Condition: good (used), Direct from closed food factory. Dimensions to follow. Ledpfx Afotp Nz Ejzorw

Condition: good (used), Direct from closed potato factory. Lrsdswtnk Repfx Afzew

Condition: good (used), Large centrifugal salad spinner. Lodpfx Aeqnwp Ijfzjrw

Condition: like new (used), Year of construction: 2021, Machine bought new in 2022 and hardly used. It literally still looks brand new. Rare opportunity. Lredpfx Asv Hfg Rofzsw