Used Long Knitting Machine for sale (68,287)

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Vacuum fryer used for vegetable chips. In very good condition. Located in The Netherlands. Itsdpfjxg Tfqjx Abced

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Itjdpfx Aboxxb Rrscjd

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Ijdpfxsxt Ibyj Abcotd Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2021, operating hours: 250 h, functionality: fully functional, overall weight: 2,000 kg, total length: 3,500 mm, total width: 1,800 mm, total height: 2,100 mm, type of input current: three-phase, CNC Milling Machine for Sale Due to Retirement. Description For sale: CNC milling and cutting machine. Specifications: - Year: 09/11/2021 - Working table dimensions: 1500 x 3000 mm - Automatic tool changer - 9000W air-cooled spindle - 8-tool linear magazine - 4-zone vacuum table with pneumatic stops - 7500W 380V vacuum pump - 2-bag chip vacuum extractor, 1500W 220V - Compressor - Z-axis travel: 200mm (X: 3000mm, Y: 1500mm) - Yaskawa 750W servo motors on X, Y, and Z axes Itsdpfxjxcvzmo Abced - Cutting tools (carbide, diamond) - Various additional equipment - Spare parts kit - Control station with computer - Software included: - TopSolid (expandable for design and drafting) - CamBam (programming) - Opticoupe (cutting optimization) Vanloisir is a van conversion company based in Charente-Maritime, operating for over 11 years. Due to retirement, we have decided to sell our CNC machine, along with all software (TopSolid) and accessories. We are offering the complete package for €14,000. For an additional fee, training for the machine's operation can also be arranged.

Condition: excellent (used), Year of construction: 2007, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2007) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2007 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals Itjdpfx Abexawdkscod 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication Jet Machinery Stock No: #78986 Machine Serial Number: SL286 Cost: £19,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Weigher 4 Dispensing Buckets PLC Controller for complete system Itsdeinbhtopfx Abced In good working order

Year of construction: 2014, condition: excellent (used), Gainsborough Vertical Form & Seal Bagging Machine Continuous VVF Bagging Machine Iedjuct Ivjpfx Abcotd Complete with Markem-Inage SmartDate X40 Coder In Excellent Condition Has had very little use

Condition: new, Year of construction: 2022, Powerful automatic expansion machine "Stretcher" is used for widening of thin-wall metal pipes with a thickness from 0.4 mm to 2.0 mm, for further pipe-in-pipe joint. This compact machine with high efficiency is an ideal solution for serial production of stainless steel chimneys. Itjdpfxotptuls Abcsd Widen machine "Stretcher" allows to produce a large range of products: chimney pipes, drain pipes, exhaust systems, ventilation pipes, etc. Expanding tools made of hard plastic to prevent future corrosion. ADVANTAGE OF THE MACHINE High performance (cycle time 3 seconds) Easy quick-release tools with height from 10 to 100 mm Wide range of options (PLC control, color touch screen, step program, turn table, rotating expansion head etc.) Expansion tools is made individually on the customer's drawings An ideal solution for the serial production of stainless, mild, galvanized steel chimneys

Condition: ready for operation (used), Year of construction: 2000, operating hours: 34,744 h, functionality: fully functional, machine/vehicle number: 258 032, overall weight: 11,500 kg, punching force: 20 t, positioning accuracy: 0.07 mm, tool diameter: 89 mm, TECHNICAL DETAILS Machine capacity: 196 kN (20 t) Air pressure: 5 bar Air consumption: 250 Nl/min Oil capacity: 160 l Turret speed: 25 rpm Travel Ranges Machine travel range without repositioning: 1,250 mm x 2,000 mm Machine travel range with 1 repositioning: 1,250 mm x 4,000 mm Machine travel range with 1 repositioning and 1 turning: Turning not possible Processing Max. sheet thickness with ball table: 6 mm Max. sheet thickness with brush table: 3 mm Max. table load: 100 kg Precision Punching accuracy (in standard mode): ±0.1 mm Positioning accuracy (repeatability): ±0.07 mm Control and Axes Pneumatic clamping devices: 2 Number of simultaneously controlled axes: 3 (X, Y, C) Performance Strokes per minute, feed 25.4 mm: X320 / Y250 Nibbling work cycle, feed 1 mm: X920 / Y920 Tooling Minimum programmable increment: 0.01 mm Number of tools: 31 Max. tool diameter: 88.9 mm Amadex stations: 2 x 11 1/4" + 1 x 2" MACHINE DETAILS Connected load: 30 kVA Operating hours: 53,497 h Ijdpfsyn Nybex Abcstd Cutting hours: 37,808 h Dimensions & Weight Dimensions (L x W x H): 4,890 x 4,370 x 2,137 mm Machine weight: 11,500 kg Note: No tools included, special transport required.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 003002, paper weight (min.): 35 g/m², paper weight (max.): 209 g/m², paper width (max.): 738 mm, paper height (max.): 1,300 mm, TECHNICAL DETAILS Max. paper size: 738 x 1,300 mm Min. paper size: 210 x 297 mm Sheet height: 1,200 mm Paper weight: 35 to 209 g/m² MACHINE DETAILS Power supply: Three-phase, 400 V Current: 12.6 A Connected load: 5.3 kW Dimensions (L x W x H): approx. 4,380 x 1,870 x 1,680 mm EQUIPMENT PFU-74F pallet feeder User-friendly touchscreen control panel 6 folding pockets Iedpfoyrnz Eox Abcotd First knife fold and 2 pockets under the knife Second knife

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 207000046, paper weight (min.): 50 g/m², paper weight (max.): 300 g/m², production capacity: 19,680 unit/h, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer: €143,250! Production printer with the following configuration: - Input Interface Module-B1 - Paper Input Module Standard-B1 - Paper Input Module Optional-B1 - Océ iHCS2.1 TopCover-B2 TECHNICAL DETAILS Printing speed A4: up to 328 ppm Printing speed A3: up to 171 ppm Maximum monthly print volume: up to 10,000,000 A4 pages Resolution: 600 x 1,200 dpi Paper specifications: Total paper weight range: 50 gsm – 300 gsm Plain paper (Canon recommended media): 50 – 300 gsm Coated media (Canon recommended media): 80 – 250 gsm Paper format: 203 x 203 mm to 350 x 500 mm MACHINE DETAILS Isdpfjyrd Rcjx Abcjtd Main unit dimensions: Main unit dimensions (W x D x H): 1,439 x 1,070 x 1,225 mm Main unit weight: 779 kg Meter readings: A4 simplex: 67,535 A4 duplex: 52,601,622 A3 simplex: 0 A3 duplex: 3,853 SYSTEM CONFIGURATION - 4x Paper Input Module - 8x Duo Paper Tray - 2x High Capacity Stacker - Remote Manager - PCL, IPDS, PostScript - Streaming & PrismaSync

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Iodpsyn Ncpofx Abcstd Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Itodpjyrfvgjfx Abcod Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: repair required (used), Year of construction: 2014, operating hours: 23,000 h, functionality: not functional, machine/vehicle number: 21066714, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: Siemens Sinumerik 840D sl, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Itjdpfx Ajyq Ra Uobced Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D sl Operating hours: 23,000 h EQUIPMENT Swiveling spindle External cooling unit (manufacturer: Pfannenberg) Note: There is a fault in the control system. It does not respond to any inputs. Repair by Siemens Service is required!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 53,216 h, functionality: fully functional, machine/vehicle number: 22024211, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse X/Y-axis: 60 m/min Rapid traverse Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Control model: BWO CNC Operating hours: 53,216 h EQUIPMENT 5 compact clamps (Model: Kopal Duo) Custom machine enclosure Iedpfx Aeyq Nx Njbcjtd Swiveling spindle External chiller (Manufacturer: Pfannenberg, cooling capacity: 1.7 kW)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 73,695 h, functionality: fully functional, machine/vehicle number: 22021508, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 20,000 rpm, controller model: BWO RC, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,000 mm Travel Z-axis: 600 mm Spindle speed: 20,000 rpm Rapid traverse speed X/Y-axis: 60 m/min Rapid traverse speed Z-axis: 45 m/min Tool holder: HSK-63F Clamping table dimensions: 2,000 x 1,000 mm MACHINE DETAILS Ijdpfxeyq Nx As Abcjtd Control unit: BWO RC Operating hours: 73,695 h EQUIPMENT Swiveling spindle Coolant system (MMS) External chiller unit (Manufacturer: Maka) New ball screw for Z-axis, installed by Maka Service in 2024

Condition: ready for operation (used), Year of construction: 1992, operating hours: 10,643 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, rotational speed (max.): 3,600 rpm, controller model: Heidenhain iTNC 530, A retrofit of the machine was carried out in 2010! TECHNICAL DETAILS Travel range X-axis: 1,500 mm Travel range Y-axis: 815 mm Travel range Z-axis: 815 mm Clamping table: 3,250 x 815 mm Table load capacity: 5,000 kg Quill stroke: 150 mm Spindle: SK 50 Speed range: 40–3,600 rpm MACHINE DETAILS Control: Heidenhain iTNC 530 Milling heads: Usable as single, double, triple, or quadruple head Total power requirement: 44 kW Dimensions & Weight Required space: approx. 8 x 4 x 4.5 m Transport dimensions base unit: approx. 6 x 3 x 3.5 m Control cabinet: approx. 2.6 x 0.6 x 2.6 m Machine weight: approx. 20 t Operating Hours Control operating hours: 20,987 h Machine operating hours: 19,703 h Itjdpfjyrdxtex Abced Program run time: 10,643 h EQUIPMENT Hydraulics Various sheet metal parts

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 8,500 mm Y-axis travel: 400 mm Z-axis travel: 95 mm A-axis: Spindle rotation A1-axis: Tailstock rotation V-axis: Bar support on processing line (90 mm) W-axis: Workpiece support relief (85 mm) X1-axis: Tailstock travel (610 mm) Laser power: 2,500 W Max. tube diameter: 140 mm Max. tube length: 8,500 mm Square tube: 12–120 mm side length Table length: 8,500 mm Working length: 8,500 mm Itodsypayuspfx Abcsd Max. bar length: 8,500 mm Max. total bar weight: 130 kg (15 kg/m) Workpiece total load (max.): 4,000 kg MACHINE DETAILS Control: Sinumerik 840D Laser type: CO laser Laser source model: Rofin DC 025 Input power type: Three-phase Compressed air connection: 6 bar Dimensions & Weight Dimensions (L x W x H): 17,536 x 4,604 x 2,237 mm Total weight: 10,000 kg Operating hours: 22,500 h EQUIPMENT CE marking Documentation/manual Chiller unit Dust extraction Cutting head: Autofocus with capacitive sensor and collision protection Automatic bundle loader with alignment, measuring, and separation system Scimitar tube transfer system CNC-controlled tube support system with 5 active support units Intelligent part ejection with conveyor belt for short pieces up to 300 mm Fume extraction: 2,000 m³/h with high-performance filtration system Cooling: MTA TAE 121 chiller, 260-liter cooling circuit Hydraulics: 25-liter tank, 25 l/min pump, 70 bar system pressure

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 900 mm, TECHNICAL DETAILS Maximum grinding length: 900 mm Distance between centers: 600 mm Height of centers (standard): 125 mm Height of centers with raised headstock and tailstock blocks: 175 - 250 mm Maximum swing diameter with riser blocks: 350 - 500 mm Table swivel / each side: 10° Table reversal dwell time: 0 - 5 s Diameter / width / bore: 250 x 13 x 76 mm Grinding wheel spindle speeds: 360 rpm Cross movement of grinding wheel head: 285 mm Rapid infeed and retraction of wheel head: 40 mm Intermittent feed per table reversal: 0.001 - 0.03 mm Ijdpfjytf Tbox Abcstd Micro-adjustment of feed, 1 division on dial: 0.001 mm Continuously variable working speeds (normal / special): 20 - 400 / 10 - 400 rpm MACHINE DETAILS Control type: Conventional

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 63 mm, rotational speed (max.): 3,750 rpm, overall weight: 6,800 kg, drilling depth: 63 mm, The machine comes complete with collets, holders, and other accessories! TECHNICAL DETAILS Max. turning length: 63 mm Max. drilling depth: 63 mm Iedpfx Aeytf Ekjbcstd Max. workpiece passage: 26 mm Max. workpiece feed: 125 mm Spindle speed range turning: 236 - 3,750 rpm Spindle speed range thread cutting: 13 - 1,875 rpm MACHINE DETAILS Required floor space: 7.16 x 2.3 m Height: 2 m Weight: 6,800 kg EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides 4 change gears for main and feed drive Service tools

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, table load: 500 kg, TECHNICAL DETAILS Travel, X-axis: 350 mm Travel, Y-axis: 250 mm Travel, Z-axis: 220 mm Additional travel (U/V axis): ± 32 mm Worktable (W x D): 590 x 514 mm Load capacity: 500 kg Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions (W x D x H): 800 x 600 x 215 mm MACHINE DETAILS Control: Mitsubishi - Advance - CNC EQUIPMENT Isdpfx Ajytfx Djbcetd Cutting in water bath Automatic wire threading Wire chopper Cooling unit

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, number of spindles: 40, TECHNICAL DETAILS Panel length min.: 170 mm Panel length max.: 2,500 mm Panel width min.: 50 mm Panel width max.: 700 mm Number of injectors: 2 Number of support units: 2 Vertical spindles Speed: 2,800 rpm Number of spindles: 40 Horizontal spindles Speed: 2,780 rpm Number of spindles for horizontal drilling in Y-axis: 6 Number of spindles for horizontal drilling in X-axis: 8 (4 on each side) MACHINE DETAILS Control system: WINDOWS Motor power (vertical drilling): 3 kW Motor power (horizontal drilling): 2.2 kW Note: Tools not included The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. Iedpfx Ajyq Irhobcstd External reference: 6106

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS Iodpfoyq Ez Tsx Abcjtd EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Ijdpfoyq Ez Hjx Abcotd Max. working length: 2,600 mm Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. External reference: 6063

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Ijdpfx Absyqzrnscetd Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8011