Used Magnet for sale (1,952)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5600x1000x1550 mm Bsdovz E E Aopfx Aktelp Weight 2500 kg Total power requirement 6,5 kw

Year of construction: 2016, operating hours: 6,100 h, condition: ready for operation (used), functionality: fully functional, Terex Pegson Premiertrak 400 2016 year Blodpfx Ajxvcdujktep 6100 hours Inlet 1100x700 mmTerex Pegson Metrotrak 900x600 2016 year 6100 hours Inlet 1100x700 mm Engine Scania DC09 CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Weight 45 tons Fitted with side conveyor Fitted with overband magnet Fitted with belt scale Machine in great working condition, ready for work like NEW

Condition: ready for operation (used), Siemens 1FT5071-0AF02-0 - Z Permanent Magnet Motor SN: E8B87362811028 Z: K93 (housing / IP67), used, normal signs of use, 100% fully functional, scope of delivery as shown in photos. Bodpex Dul Tefx Aktjlp

Condition: ready for operation (used), Siemens 1HU3078-0AF01 -Z Z=G45 permanent magnet motor, SN: EC18226600100, used, heavy signs of wear, 100% functional, scope of delivery as shown in the photos Bsdpfsx Dvlhjx Aktelp

Condition: new, Siemens 1HU3102-0AH01-Z permanent magnet motor, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Bedpfx Akox Dvmrjtolp

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Bjdpfx Asxcbppjktjlp Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Blodpfx Akjvz Hfwstop Total power requirement 1,6 kw

Condition: used, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Speed = n. max.: 2000 rpm Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Blodpfxouch N Io Aktop Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Weight: 23 kg good condition

Condition: ready for operation (used), * Brand: Wagner * Length frame: A-A = 2600 mm * Beltwidth: 1200 mm Bodpfx Akjywm T Setolp * Driving: 3 kW gearbox * Dim. Block: 1600 x 1100 x 600mm * Incl.: rectifier.

Condition: ready for operation (used), * Brand: Bakker Magnetics * Model: permanent magnetic block * Type: Neodymium Bedpfjywnc Uex Aktjlp * Dim. block: length 1150 mm, width 180 mm, height 80 mm.

Condition: ready for operation (used), Year of construction: 2023, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,000 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding machine manufactured in 2023. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Construction: Welded steel frame; Bending system: Wedge drive; Crowning: Included, adjustable via control • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Manipulation and positioning (integrated) • 2-axis part manipulator with 12 suction modules; X travel 2,653 mm; stroke 100 mm • 5-axis rear stop; Rotary manipulator; Front stop; Loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop: 3,000 mm/s • Part manipulator: 3,000 mm/s • Rotary manipulator: up to 3 rev/s • ToolMaster Bend: 2,400 mm/s • Positioning accuracy • Y: 0.10 mm; X: 0.05 mm; R: 0.05 mm • CNC control • 21.5" touchscreen; Windows 7 Ultimate 64-bit; keyboard and mouse • USB; RJ45; Ethernet 10/100 Mbit/s; Internet teleservice/remote diagnostics • Programming software • TecZone Fold floating license • Automatic programming from 2D/3D, automatic bending program generation • 3D bending simulation; collision checking; manual program modification • ToolMaster Bend (automatic tool handling) • Automatic hold-down tool positioning and setup per program • Automatic positioning of standard, Pick&Place, and curved holders • Included tooling • 16 standard hold-down tools (160 mm each) • 6 Pick&Place hold-down tools; segments 10/15/20/40 mm • Corner hold-down tool, length 199 mm • OBW90 and UBW90 bending tools • ENW equipment • ENW function for tilting hold-down tools • ENW110-40 tool, length 3,123 mm, depth 40 mm • Min bending width with ENW: 40 mm • Bend angle measurement • Optical bend-angle assistance with integrated camera Blodps Afpmlofx Aktop • Graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety • CE certification; rotating safety doors; safety light barriers • Working-area access protection; foot switch with enable; emergency stop • Electrical power supply: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation and feeding; transfer to bending center • Automatic finished-part unloading with belt conveyor • Max blank size: 3,048 x 1,500 mm • Storage interface included • Loading trolley: not included • Rail set: not included • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules and 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Identification and connectivity accessories • Wireless 2D code reader with Bluetooth • Barcode and DataMatrix code reading • Automatic production program loading

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm Blsdps Adu Swofx Aktjp MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: used, machine/vehicle number: GB897004, Max. grinding wheel diameter: approx. 250 mm, max. grinding length: 800 mm, with magnetic clamping plate, dimensions: 800 x 400 mm, coolant system, fleece filter system. Bljdpfs Af Nicex Aktop

Condition: used, Year of construction: 2017, operating hours: 6,886 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Bljdexx Tfzjpfx Aktjp Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Bedpfx Akef Dlzuetelp Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. Bjdpfxjzv Hw Eo Aktjlp The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Shipping by freight forwarder or collection only by prior arrangement.

Condition: new, Year of construction: 2026, Drum magnet installed in a housing Magnet: Ferrite Drum diameter: 300 mm Drum length: 400 mm Entrainment elements: 4 pieces, 10 mm Bodpfx Akoznmunetolp Gear motor: 0.25 kW / 400 V / 50 Hz Rotation speed: 30 RPM Housing: made entirely of stainless steel With upper and lower parts: 1 inlet / 2 outlets With material limiting slide gate at the inlet Front panel removable

Condition: good (used), functionality: fully functional, Manufacturer unknown Type: 211 – 25/26 No. 89899 Power: 220V Table length: 250 mm Table width: 260 mm Height: 135 mm Weight approx. 25 kg Bodpezzlm Nefx Aktolp .

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Blsdpfxszfi A As Aktjp Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, BOLZ stainless steel mixing vessel, 706 liters Pressure-resistant magnetic stirrer with heating jacket Vessel capacity: 706 liters Usable volume: 600 liters Max. operating temperature: 150°C Nord Drives magnetic stirrer Power: 0.55 kW Bsdpfjzqantox Aktelp Manufacturer: Other Year of construction: 2006 Space requirement: 140 x 105 x 215 cm

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) - Frequency: 50 Hz - Protection class: IP55 Blodsz R Sw Hepfx Aktjp Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Workpiece Area Workpiece length: 310 mm Workpiece width: 150 mm Workpiece height: 210 mm Grinding Spindle Spindle speed: max. 2,800 rpm Distance between grinding wheel and table: 280 mm Spindle overhang: 250 mm Clamping System Magnetic clamping plate: 300 × 150 × 70 mm Type of magnetic clamping plate: Permanent magnet Machine Design Column diameter: 130 mm Performance Data Total power consumption: 1.9 kW Machine weight: approx. 0.58 t Dimensions Space requirement: approx. 0.62 × 0.72 × 1.80 m EQUIPMENT Blsdpfs Aa Nd Tsx Aktep Permanent magnetic clamping plate

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. Bledpsfnldqjfx Aktep The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis KOIKE Gammatec 1530 plasma cutting machine was manufactured in 2018. It features an effective cutting area of 3,000 × 1,500 mm and a maximum cutting thickness of 30 mm for steel. The machine is equipped with a KOIKE Katana CNC controller and a 15-inch touchscreen for ease of operation. If you are looking to get high-quality plasma cutting capabilities, consider the KOIKE Gammatec 1530 machine we have for sale. Contact us for further details. • Effective cutting area: 3,000 × 1,500 mm • Maximum cutting thickness (steel): 30 mm; production thickness: 25 mm • Plasma cutting current: 35–200 A • Cutting speed: 50–20,000 mm/min; positioning speed: 34,000 mm/min • Drive system: AC servo motors • Guide system: Hardened precision guides with rack & pinion • Cutting torches: 1 • Table height: 900 mm • Cutting table: Integrated fume extraction table • Compressed air: 7 bar, oil- and water-free • Machine control power: 230 V / 50 Hz, 2 kVAPlasma system – Kjellberg Smart Focus 200 • Manufacturer/model: Kjellberg Smart Focus 200 • Cutting current: 35–200 A; duty cycle: 100% • Max piercing capacity (mild steel): 30 mm • Marking current: 12–50 A • Power supply: 400 V / 3-phase / 50 Hz • Max connected load: 51 kVA; required fuse: 100 A (slow-blow) • Dimensions (L×W×H): 1,030 × 680 × 1,450 mm; weight: 388 kg • Gas control: PGV-200 automatic gas console • Cutting torch: PerCut 4000CNC control & torch height control • CNC controller: KOIKE Katana with 15" touchscreen • Operating system: Windows 7 Professional • File formats: DXF, EIA, ESSI • Network: Ethernet • Torch height control: SmartLift ARC120 • Z-axis travel: 120 mm; Z positioning speed: 6,000 mm/min • Collision protection: Magnetic torch holder • Plate detection: Ohmic touch sensing • Plate alignment: Manual Bodpfx Ako Ahqrustslp Additional equipment • Note: Dust extraction unit is excluded

Condition: used, Year of construction: 2012, x-travel 2100 mm y-travel 1020 mm z-travel 762 mm Control Fanuc MXP-200FP spindle speed 6000 U/min spindle capacity ca. 22 kW max. torque on the spindle ca. 550 Nm tool taper SK 50 table surface area 2300 x 1020 mm max. table load 3000 kg T-slots 6 x 22 mm T-slot - distance 150 mm 3-Axis CNC Machining Center Equipment/Accessories: - Automatic tool changer with chain magazine, 40 stations - max. tool-Ø: 120/240 mm - max. tool length: 350 mm Blsdpfxex Sr A Ue Aktsp - coolant system with internal coolant supply and filter - emulsion mist extraction - electronic handwheel - 2 pcs. magnetic clamping plates 800 x 400 mm - various tool tapers SK50 - chip conveyor