Used Maho Mh 700 for sale (442)

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm Kodotv Ii Iopfx Adljdt table surface area 1250 x 700 mm spindle taper ISO 50 spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,328 h, functionality: fully functional, machine/vehicle number: 11180000573, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm C-axis indexing: 360° (0.001°) Feed rate: 40 m/min Rapid traverse: 40 m/min Number of pallets: 1 Pallet dimensions, diameter: 1,000 mm Max. workpiece weight: 1,000 kg Max. torque: 7,900 Nm Max. spindle speed: 18,000 rpm Spindle drive power: 15 kW at 40% duty cycle Spindle drive power: 10 kW in continuous operation Tool interface: CAT 40 Ksdpfjzxf Inox Adledt Number of tool positions in the magazine: 60 Tool changer: Double gripper MACHINE DETAILS CNC control: 3D contouring control MillPlus Total power consumption: 55 kVA Coolant tank capacity: 600 l Dimensions (L x W x H): 7,000 x 3,500 x 3,902 mm Operating hours Hours under power: 33,831 h Spindle operating time: 6,328 h EQUIPMENT Electronic handwheel Chip conveyor Internal coolant supply Rotating viewing windows Flushing gun Preparation for Renishaw probe Accuracy package Preparation for internal cooling with 40/80 bar Paper band filter

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis Kjdpfsigv Ipsx Adlsdt 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Accessories - Central lubrication - coolant system - Operating instructions

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain MillPlus IT Travel ranges X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 rpm Kdjdpfoz Dk I Usx Adlet Tool magazine for 60 tools, SK 40 NC rotary table integrated into a fixed table, diameter 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swiveling range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theoretical pump output), tank 600 l Paper band filter Rotating viewing window Chip conveyor

Condition: ready for operation (used), operating hours: 46,652 h, functionality: fully functional, machine/vehicle number: 661227, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, power: 5.5 kW (7.48 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm Spindle speed range: 40 – 4,000 rpm Spindle connection: ISO 40 Table surface area: 900 x 480 mm Kdodozpxfbjpfx Adlst MACHINE DETAILS Spindle power: 5.5 kW Operating hours: 46,652 h Machine weight: 2,900 kg EQUIPMENT Digital position display Millplus CNC

Year of construction: 1988, condition: used, machine/vehicle number: 82053, table mounting size: 600 x 1100 mm movement x: 800 mm movement y: 450 mm movement z: 500 mm tailstock stroke: von Hand ca. 50 mm Kjdpoxnp Djfx Adlodt spindle turning speed range: 63 - 3150 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x/y/z 4,5/2,6/3 m/min electrical connection: 380 V, 5,5 kW space needed: 3000 x 2500 x 2030 mm weight: ca. 4000 kg control 432 with graphic

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 63814, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, quill stroke: 80 mm, TECHNICAL DETAILS Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 400 mm Clamping surface: 254 mm x 354 mm Ksdpfx Adoywhbdeledt Tool holder: ISO 40 Quill stroke: 80 mm Spindle speeds: 80 - 4,000 rpm Rapid traverse X: 4 m/min Rapid traverse Y: 3 m/min Rapid traverse Z: 5 m/min MACHINE DETAILS Total connected load: 16 kVA

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter. Ksdszz Ahqopfx Adledt

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. For self-collection only. Details see the attachment and available upon request. Kjdpfx Aoz Atpnsdledt

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO Kdedpfx Ajxl E Syedlot quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: excellent (used), Working travels 400 x 210 x 340 mm Table size 600 x 400 mm Kedpfxexpubrj Adlsdt Spindle taper ISO40 Spindle speeds 40-2000 rpm digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 Kodpfxez Dp Dbo Adlsdt C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Ksdpjz Damtsfx Adlodt Includes Heidenhain probe. Tool holder: SK 40. The zero-point clamping plate shown on the table will be removed and is not included in the sale.

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Tool changer: 60 positions Kodpfxex Dlf Re Adlsdt Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: used, Tool changer chain, chain magazine, tool changing system, tool magazine Ksdpfx Aeq Tvp Usdledt -Manufacturer: MAHO, Tool changer from CNC machining center MAHO MH 800C -for: max. 24 shots -Recording: SK -Dimensions: 1200/410/H480 mm -Town weight: 106 kg

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, CNC Vertical Machining Center “DECKEL MAHO M 1” With Siemens 828 D Shop Mill control Year of manufacture: 2022, Commissioning: 9/2023 Travel ranges: X 550, Y 550, Z 510 Kdjdpsz A D Dmofx Adlet Spindle speed range: 20 – 12,000 rpm, stepless With the following accessories: Fixed angular table, 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions (SK 40) IKZ 20 bar Electronic handwheel 3D measuring probe Renishaw PP 40 Tool length measurement Renishaw TS27R Full protection enclosure with sliding doors and interior lighting Coolant system Chip conveyor Oil mist extraction Coolant spray gun 3 adjustable machine feet Operating manuals THE MACHINE IS IN EXCELLENT CONDITION!

Condition: used, Technical details: x-travel: 700 mm y-travel: 450 mm Ksdevc Avhopfx Adljdt z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice *

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm Kdedpfsuntmdex Adlet number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain Ksdpfxsy A Tdne Adljdt total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) Kdodpfx Adoxy Styjljt - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm Kedpfjy E Tv Ajx Adljdt control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: used, Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 Kdedpfx Ajq T T Ntodlot -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Condition: good (used), Year of construction: 2001, operating hours: 12,219 h, functionality: fully functional, nominal power (apparent): 30 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, For sale is a used CNC vertical machining center, DECKEL MAHO DMC 63 V, manufactured in 2001, in good condition for its age. The machine is operational and can be inspected with power applied after prior arrangement. • Control system: Siemens Sinumerik Kodpfx Ajz Dpkzedlodt • 4th axis from PL Lehmann with three-jaw chuck • Tool magazine • Coolant system with separate unit for high-pressure internal cooling • Operating hours: approximately 12,219 hours in single-shift operation • Chip conveyor Supply voltage: 400 V Phases: 3+PE Frequency: 50/60 Hz Current consumption: 42 A Fuse rating: 50 A Power consumption: 30 kVA Secondary voltage: 230 V Secondary voltage: 24 V Machine number: 809 409 If you have any questions or require further information, please send us a message or call us.

Year of construction: 1980, condition: reconditioned (used), Universal swiveling and tilting table for MAHO MH 1000 Clamping area: 1050 mm x 630 mm Kdjdpfsfx Aipsx Adlot The universal swiveling and tilting table is in good condition!

Year of construction: 1987, condition: used, machine/vehicle number: 63658, movement x: 600 mm Kedpfxjbv Haaj Adljdt movement y: 400 mm movement z: 400 mm spindle taper: ISO 40 spindle turning speed range: 80 - 4000 rpm carriages continuously adjustable: 0,1 - 1500 mm/min rapid move: x u. y/z 4/2,5 m/min electrical connection: 380 V, 16 kVA kW space needed: 2450 x 2200 x 1900 mm weight: 2250 kg