Used Manual Bending Machine Pan for sale (74,822)

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Hnedpfsyttv Rex Acher

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Hnjdpfx Asyttwbecher

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Hsdpfezka H Asx Achenr

Year of construction: 2000, condition: ready for operation (used), A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible. Hnedpfx Acezhw Tuehsr

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Hnjdpfxoxcx Ate Achjr

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Hnodpfxeuwrv Ds Acher

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Hnedpfx Ajwwlkischer

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Hsdjxl Up Uepfx Achsnr

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Hedpfx Aeycwtfochenr

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Hedpfxorc Hiis Achjnr

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Hedpfewg E Dhox Achjnr

Year of construction: 2007, condition: ready for operation (used), A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible. Hnsdpfxozka Nwe Achsr

Condition: new, Year of construction: 2026, roller diameter: 140 mm, roller length: 1,570 mm, Equipment: cone bending device, hardened rollers, swiveling upper roller, - Capacity: 1570 x 4.5 mm - Electrically adjustable rear roller - Electrically adjustable bottom roller (material clamping) - Digital display for rear roller movement - Digital display for bottom roller movement (material clamping) - Hardened rollers - Tapered rollers - Brake motor Hjdpfxogg Nv Io Achenr - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2019, *Title:* Hjdpfx Aszr Rcwochenr SAY-MAK SPK-35 Motorized Profile Bending Machine - 2019 - 0.75kW *Description:* For sale: motorized roller bending machine, brand *SAY-MAK*, model *SPK-35*. *Features:* - *Year*: 2019 - Serial No.: 290367 - *Motor*: 1.5 kW - *Power Supply*: 400V Three-phase - *Weight*: 400 kg - *Application*: Bending round/square tubes, flat bars, angles, profiles - *Controls*: Foot pedal + Emergency stop - *Condition*: Very good condition, 2019 machine Perfect for metalwork, locksmithing, railings, canopies, and boiler making. Robust machine, from a renowned Turkish brand. Rollers included.

Condition: excellent (used), Year of construction: 2021, ŞAHİNLER PK-35 Motorized Profile Bending Machine - 2021 - 1.5kW Hjdpfszr Rcdex Achenr *Description:* For sale: motorized roller bending machine, brand *ŞAHİNLER*, model *PK-35*. *Features:* - *Year*: 2021 - Serial No.: 296208 - *Motor*: 1.5 kW - *Power Supply*: 400V Three-phase - *Application*: Bending tubes, profiles, flat bars, angle irons - *Controls*: Control panel with emergency stop + Foot pedal - *Condition*: Very good condition, 2021 machine, little use Ideal for metalworking, locksmithing, glass structures, gates, and boiler making. Reputable Turkish brand, very robust. Rollers included.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, degree of automation: automatic, tube wall thickness (max.): 2 mm, Giętarka do rur CNC SHUZ TUNG CNC38BR2 Producent: SHUZ TUNG Machinery Industrial Co., Ltd. (Tajwan) Model: CNC38BR2 Rok produkcji: 2018 Dane techniczne: * Maksymalna średnica rury: 38 x 2 mm * Moc: 22 KM * Zasilanie: 400 V * Waga maszyny: 2500 kg Opis: Giętarka do rur CNC SHUZ TUNG CNC38BR2 w bardzo dobrym stanie technicznym i wizualnym. Maszyna jest wyposażona w system sterowania CNC i jest oferowana z dużym pakietem narzędzi wliczonym w cenę sprzedaży. Nadaje się do gięcia rur stalowych, ze stali nierdzewnej, aluminiowych i innych metali. Hsdpfezq Dh Rsx Achonr Maszyna posiada w pełni zamknięty system bezpieczeństwa i automatyczny podajnik rur. Idealna do produkcji rur samochodowych, meblowych, poręczowych, wydechowych i przemysłowych. Rceww Tweza Sw Hs Alsd Dołączone narzędzia: * Ø8 mm – R17,5 * Ø10 mm – R15 * Ø10 mm – R28 * Ø12 mm – R26 * Ø12 mm – R50 * Ø14 mm – R30 * Ø16 mm – R25 * Ø16 mm – R38 * Ø16 mm – R50 * Ø16 mm – R60 * Ø22 mm – R32 * Ø22 mm – R50 * Ø24/25 mm – R48 * Ø25 mm – R45 * Ø25 mm – R60 * Ø28 mm – R100 * Ø30 mm – R63 * Ø35 mm – R63 * Ø35 mm – R70 Maszynę można obejrzeć na miejscu. Dostępna pomoc przy załadunku. Lokalizacja: Polska. Dodatkowe zdjęcia i filmy dostępne na życzenie.

Condition: used, CNC press brake FASTI, Type 904-125/30 Serial No. 95-904-5775 Year of manufacture 1995 Press force 125 tons Working length 3050 mm Stroke approx. 335 mm Stand distance 300 mm Distance between side stands 2550 mm Tool installation height max. 465 mm (opening width between tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Back gauge X-axis 500 mm Back gauge R-axis 115 mm Back gauge Z-axis approx. 1950 mm Lowering speed Y-axis rapid traverse 90 mm/s Lowering speed Y-axis working traverse 8.9 mm/s Return speed Y-axis retraction 75 mm/s Oil capacity approx. 160 liters Motor power 18.5 kW Mains connection 400 volts, 50 Hz, 20 amps - 7-axis CNC control DELEM, Type DA 58 with LCD screen - 1 axis for back gauge - gauge depth (X-axis) - 2 axes for back gauge - gauge height (finger R1 + finger R2) - 2 axes for back gauge - gauge fingers, laterally adjustable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or only 2-hand control panel - Hydraulic tool clamping for the upper tool system TRUMPF, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool shank 13 x 20 mm) - Safety light curtain FIESSLER, Type AKAS - 2 pcs material support arms, manually adjustable laterally and in height - Electrical diagram, hydraulic diagram, user manual for control system available - Control cabinet on the machine - Without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Hnsdehmmfkjpfx Achjr Weight 8.5 tons Good condition

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Hodpfsttc Uasx Achonr

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Hnjdoxpqy Dspfx Achjr Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Hnodpfjya Iaqsx Achsr Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm Hnedpfx Acjxabtvohor total power requirement 2.2 kW motor 400 Volt 50 Hz oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller Hjdjxabkbopfx Achsnr * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting Hnedpfxoxabhao Achsr * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Hsdpfx Acjxacbushsnr Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min Hjdpfx Aexabhmschenr work height max. 930 mm table: 660 x 1250 mm total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual