Used Material Feeder for sale (17,941)

Condition: used, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as control and evaluation software for ZwickRoell materials testing machines. It enables standardized test procedures, logs measurement data, and supports traceability, among other features. Windows 11 Compatibility: ZwickRoell’s testing software (especially testXpert III) supports current Windows platforms, allowing use with Windows 11. Ndjdpjxt Hn Ssfx Adwed Product Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) The system comes from laboratory usage and was employed for mechanical materials testing at ambient and high temperatures. All devices are used, well-maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Maximum test force: 100 kN AC drive 4 kW, widened stand design (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, power consumption 9 A Working area: Height 1,765 mm, Width 1,030 mm Crosshead speed: 0.0005 – 1000 mm/min Positioning accuracy: < 2 µm Noise level: ≤ 70 dB(A) Test force range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Power requirement: 5.0 kVA Load frame height: approx. 2.32 m Machine weight: approx. 1,820 kg Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High-Temperature Furnace Maximum temperature: 1200 °C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal force: 100 kN Protection rating: IP67 Precise force measurement to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K MAYTEC High-Temperature Furnace HTO-09/2 1200°C-SG Load Cell TC-LC100KN.G02 (100 kN) Connection cables and mounting accessories (if available) (Specifications and technical data may be subject to change and errors.) Further questions can be answered by phone.

Condition: used, Multisaw cross feeder Ndjdpfx Adenwnpqowed

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, Kuhn SPW 22 Intense is a self-propelled animal feed wagon with two drums inside with an impressive capacity of up to 22 cubic meters! The machine from the first user, has an original mileage of less than 8,000 motor hours. Regularly serviced and used. It has many new parts such as: Conveyor belt New drum milling head New planetary gear Engine oils and filters - We accept various forms of payment such as Leasing, credit or classic transfer. We also offer transport within Poland or the European Union more information from the seller! - Equipment: Cabin Heating Radio Wipers Backlight 4-wheel drive Reversing camera Grimmer seat - Transport dimensions: Length: 11m Width: 2.5m Height: 3.1m Weight approx.: 16200kg - Technical data: Fiat engine (FPT) 165 kW - 224HP ----- Note! For Export and for companies to deduct VAT, they apply in net value. Discount possible for individual customers - ----- We provide professional, free advice and are characterized by an individual approach to the customer. We will always give you reliable advice even if you are in arrears with repayments or are in the Bik and Krd databases. - We have attractive credit or leasing conditions. Detailed information about financing will be provided by our representative Mr. Tomasz at tel.: 667910542 —— Nedpfx Aewbqm Rsdwsdd THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN THE MEANING OF ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, LNS Super Hydrobar 6.42 HS 4.2 (2017) Bar feeder Condition: very good Nedpfxsxwmc Rj Adwjdd Year of manufacture: 2017 Scope of delivery: - Documentation

Condition: like new (used), Year of construction: 2023, operating hours: 1,000 h, functionality: fully functional, Single layer textile cutter Cutting width: 1600 mm Cutting length: 2500 mm Ndedpfx Adew Invuewsd The machine was in use for one and a half years but not every day. It is almost like new! Reason for sale: Backpack factory closure.

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Thyristor controller: Included Nodpju Tkraofx Adwsdd Frame: With/Without With Stainless steel wear plate.

Condition: excellent (used), Instron Instron 2663-822 Standard Video Extensometer (SVE) Non-contact strain measurement system for materials testing machines Description: The Instron 2663-822 Standard Video Extensometer (SVE) is a non-contact optical measurement system for precise detection of strain during tensile, compression, and flexural testing. Using contactless measurement via digital image processing, markers on the specimen surface are tracked—completely without mechanical influence on the test results. Ideal for applications where traditional contact extensometers (e.g., with blades) are unsuitable, such as with thin, sensitive, or elastic materials. The SVE is compatible with Instron materials testing machines and can be integrated into the Bluehill software (depending on system version). Special features: - Contactless strain measurement – no impact on the specimen - High resolution and measurement accuracy - Ideal for retrofitting older Instron systems - Low-maintenance and robust for laboratory use Technical specifications: Feature / Specification Measurement principle: Optical, contactless strain measurement Fields of view (FOV): 50 mm / 100 mm / 200 mm / 350 mm / 500 mm Resolution: - 50 mm FOV: 3 µm - 100 mm FOV: 4 µm - 200 mm FOV: 5 µm - 350 mm FOV: 25 µm - 500 mm FOV: 50 µm Measurement accuracy: - 50 mm FOV: ±5 µm or ±0.5% - 100 mm FOV: ±7.5 µm or ±0.5% - 200 mm FOV: ±10 µm or ±0.5% - 350 mm FOV: ±50 µm or ±1% - 500 mm FOV: ±100 µm or ±1% Nedpfx Adexvxwkewodd Data rate: 50 Hz Recommended markers: Dots approx. Ø 2 mm (at 50 mm FOV) / Lines approx. 1 mm wide Gauge length: Depending on the field of view, e.g., minimum 5 mm with 50 mm FOV Application range: Tensile, compression, and flexural tests under ambient or temperature-controlled conditions Power supply / interface: Via Instron system controller (compatible controller required) Reliable & durable: Proven Instron model 2663-822 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Specifications, subject to change and error!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Nsdpjxxdgpjfx Adwjdd Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2007, machine/vehicle number: L151804, Nakamura-Tome NTM3 lathe together with a 6-meter IRCO SiMag Breuning bar feeder. The machine has been serviced throughout its life by Abplanalp service, who also disconnected it and prepared it for transport after production was finished. We took it in as a trade-in with plans to start some production, but it turned out to be too large for our needs – so we never even connected it since then. Technical details (from manufacturer): • Year of manufacture: 2007 • 11-axis Nakamura-Tome Super NTM3 • 2 spindles, 3 turrets • Every second tool driven • Control system: Fanuc 16i-TB • Main spindle: 15 kW, up to 4500 rpm • Sub spindle: 11 kW, up to 5000 rpm • Max turning diameter: 190 mm • Bar capacity: 65 mm • Machine weight: 12,000 kg Ndsdexg Nb Ijpfx Adwsd Full documentation included: all manuals and schematics originally supplied with the machine. Additional equipment: • Parts catcher • Parts conveyor • Bar loader: IRCO SiMag • Electrical transformer • IRCO SiMag Breuning bar feeder (6m)

Condition: excellent (used), length: 4022mm Njdpevbdk Refx Adwodd width: 209mm motor power: 0,092 kW

Condition: like new (used), functionality: fully functional, Offered are 16 material silo containers with a capacity of 500 to 1,250 liters each, equipped with a double extraction box. The containers are in very good condition and come from a cleanroom production facility where only PP material was processed. Ndodpfxswpp Ebs Adwed

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Ndsdpefmqq Eefx Adwsd Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Year of construction: 2009, condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Ndedpfed Sukxox Adwsd

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD – SPA – class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Nedpjxxddzofx Adwedd Weight measurement chain : Weighing scale / Precision weighing scale   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and – tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Stores 800 different dosing recipes Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V – single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. GMP-compliant construction   Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: excellent (used), Year of construction: 2004, Bar feeder - SAMSYS MULTISAVER 5.55 - Servo - Year of manufacture: 2004 - Max. bar length: 1240 mm Ndjdpfx Ajxyuflodwjd - Round material: 5 - 55 mm - Hexagonal material: 5 - 47 mm - Material feeder - servo drive Dimensions: LxWxH: 1.8 x 1.5 x 1.6 m / Weight: 310 kg Subject to errors and input mistakes.

Year of construction: 2020, condition: new, Layout: Lifting mast Njdpfx Asphq Dzsdwjdd Attachment suited for: Lifting equipment Selling price: € 1.850, US$ 1.960 Material Handling Arm for loaders (First picture is for Volvo L35) Load carrying capacity: 2 tons

Condition: excellent (used), DATEC EMJ-2505 Coil Feeder, Sheet Winder Ndedjwh Ttaopfx Adwsd Manufacturer: DATEC CO., LTD. Type: EMJ-2505 Coil Width: 250 mm Coil Inner Diameter: 300–508 mm ⌀ Coil Outer Diameter: 1000 mm ⌀ Coil Weight: 500 kg Sheet Thickness: 0.3–2.6 mm Compensating Capacity: 480 mm² Speed: 12 m/min Motor Power: 0.4 kW Input Voltage: 220 V / 50 Hz

Condition: excellent (used), fuel type: electric, color: green, Year of construction: 2015, operating hours: 25,987 h, Year of manufacture: 2015 Field of application: Construction Empty weight: 30.000 kg Mast length: 13 m Technical condition: very good Visual appearance: very good Price: On request Serial number: 825.7.2315 Please contact Ferdinand Pater for more information Stock no. D19 Machine Brand Sennebogen Type: 825AE-D-series Weight: 30 Ton Serial number: 825.7.2315 Building year: 2015 Worked hours: 25.982 Engine: Electro engine 400V 110kW Ndedpfx Adet Dlv Njwed Boom: K13 Boom configuration, boom 7.5 meter, stick 5.8 meter Cabin: "Maxcab industrie, Hydraulic Cab Riser, 2,7 m. in height gantry catwalk on cabin, extra window 320x270mm in cabin floor " Upper carriage: Standard Sennebogen color, Central greasing system, Hydro-clean filter Undercarriage: Sennebogen ST20, 400x400 including 2x 5 tons extra counterweight, 1 meter extra pilon. Lights: Several (LED) lights on boom, stick and cabin Extra: Machine has a brand new origional Sennebogen slewing ring, is serviced and clean, ready for work

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a high-quality materials testing machine, model Zwick/Roell Z010 TN ProLine (BT1FB010TN.D30), supplied with comprehensive equipment. Nedpfx Ajw Uifdsdwodd This system is ideally suited for tensile, compression, bending, and component tests and is offered with original Zwick software, accessories, and safety screen. Complete system Including safety screen (CE-compliant, with electric interlock) Comprehensive accessories and software included Technical data of the testing machine: Model: Z010 TN ProLine, nominal force 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuous up to nominal force High-precision guidance, very low noise emission High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Including interface card for force transducer (additional slot available for expansions) Expandable with options and modules Safety – Safety screen (included in delivery): Suitable for ProLine Z005TN, Z010TN, Z020TN With electric interlock and additional manual locking Makrolon pane, 6 mm thick, pivoting (hinged left) CE-compliant Mandatory for applications with risk of operator injury Force transducer: Xforce HP force transducer, nominal force 10 kN Accuracy class: 1 from 20 N, 0.5 from 100 N (according to ISO 7500-1) Extremely good linearity (

Condition: good (used), functionality: fully functional, rotational speed (min.): 38 rpm, rotational speed (max.): 38 rpm, type of input current: three-phase, overall weight: 1,200 kg, total length: 5,000 mm, total width: 600 mm, Direct power transmission Total length: 4000mm Trough width: 500mm Material of the conveyor screw: steel Drive motor: SEW-EURODRIVE Drive power 5.5kW Voltage: 400V Protection IP55 Nsdjudk Sbepfx Adwsdd End bearings, Robust cast iron housing

Condition: excellent (used), Manufacturer: Hoppmann Type: FT15-2L SS Stainless steel hopper. Adjustable, heavy-duty dosing tool frame Teflon hard coating, anodized aluminum bowl Polycarbonate coverings Dual motor drive system Nedpfxjh Nycts Adwsdd + linear feeding belt 1300 mm Overall diameter: 584.0 mm Overall height: 405 ± 25 mm Bowl emptying height: 324 ± 25 mm Bowl inner diameter: 406.0 mm

Year of construction: 2010, condition: excellent (used), functionality: fully functional, vibrating feeder RNA 700mm bowl feeder Ndjdpfsh S Il Tox Adwod RNA trough vibration feeder + linear feeder, with controller. 50 Hz nominal vibration frequency with double speed control Manufacturer: RNA Type: ESK-N80 trough diameter: 700 mm voltage: 220 volts 50Hz protection: ip30 vibration: 3000 c/min vibration regulator: RNA adjustable height stand +linear dosing unit length: 1520 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Njdpjwav R Sofx Adwjdd Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, vibratory feeder bowl feeder Ndedpfxsicnice Adwjd make: E+K SORTIERSYSTEM type: EMSE-55GU trough diameter: 800 mm; voltage: 230 volts 50Hz protection: ip 44 vibration: 3000 vibration controller: REOVIB MFS 168 Sick sensor adjustable height frame inclusive dimensions: height: 1400mm width: 900mm weight: 550 kg

Condition: excellent (used), RNA 900 mm diameter vibration feeder, component feeder / ct1339a In good condition, for sale with ESR3000 controller. Manufacturer: RNA Type: SRC-N 630-1 L Vibration frequency: 50 Hz / 3000 min - 1 Voltage: 220 V Power: 5.4 Diameter: 900 mm A = Output height: 167mm B = Trail width: 50mm D = Bowl diameter: 980mm H = bowl height: 250mm Ndjdpfx Ash Iy Ttjdwsd S = Track division: 81mm