Used Matsuura Hplus 300 for sale (41)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,756 h, functionality: fully functional, machine/vehicle number: 16252, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: FANUC 30i, workpiece weight (max.): 250 kg, TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Work Table Pallet size: 300 x 300 mm Max. workpiece weight: 250 kg Rotary table: 360° x 0.001° Minimum/maximum spindle to table center distance: 120/620 mm Minimum/maximum spindle to table surface distance: 80/580 mm Max. workpiece size: 500 x 500 mm Spindle speeds: 50 - 15,000 rpm Spindle taper: ISO 40 Spindle drive power: 15/7.5 kW Feed rates X/Y/Z: 1 - 50,000 mm/min Rapid traverse: 50 m/min Rapid traverse B-axis: 33.3 rpm MACHINE DETAILS Control: FANUC 30i Total connected load: 38 kVA Weight: 10,000 kg Dksdexnwy Iopfx Ag Rsg Operating Hours Running time: 15,756 h Control on-time: 116,776 h

Condition: good (used), Year of construction: 2013, operating hours: 17,904 h, functionality: fully functional, machine/vehicle number: 19261, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 71, Geometry protocol available TECHNICAL DETAILS Control: Fanuc 30iM X travel: 500 mm Y travel: 560 mm Z travel: 500 mm Spindle-to-table distance: 80 - 640 mm Spindle Speed: 15,000 rpm Power: 15 kW Torque: 119 Nm at 1,200 rpm Tool holder: BT40 Spindle bearing inner diameter: 70 mm Spindle speed command: 5-digit direct S command Spindle alignment: electric Tool clamping force: 11.8 kN NC rotary table B-axis: 0.001° Pallet size: 300 x 300 mm Table load (max.): 250 kg Workpiece size (max.): Ø530 x 760 mm Pallet clamping surface: (M12 x P1.75) x 32 Feed rate Rapid traverse speed (X/Y/Z): 60,000 mm/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Jog feed rate (X/Y/Z): 0 – 4,000 mm/min Min. travel increment (X/Y/Z): 0.001 mm Min. travel increment B-axis: 1 degree Tool magazine Number of tool positions: 71 stations Max. tool diameter (with adjacent tools): 90 mm Max. tool diameter (without adjacent tools): 150 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool selection: Fixed address system Tool change arm: W-gripper type Tool-to-tool change time: Dependent on tool weight Tool change time: Chip-to-chip Target value dependent Tool station spacing: 95.25 mm Automatic pallet changer (PC2) Number of pallets: 2 Change method: Rotary table Pallet change time (pallet-to-pallet): 6.5 s Total pallet change time: 7.0 s Pallet clamping force: 41.5 kN Max. pallet weight: 40 kg MACHINE DETAILS Machine height: 2,683 mm Footprint (not including maintenance area): 2,145 x 3,655 mm Machine weight: 8,300 kg Power supply: 50 kVA On-time: 51,149 h Program run: 30,722 h Machining time: 17,904 h Workpiece counter: 1,389 pieces EQUIPMENT - Chip management with Chip conveyor - Coolant system with paper belt filter and 70 bar high-pressure internal cooling (ICS) - Workpiece measurement with Renishaw OMP60 touch probe Dkjdpfxowm D Irj Ag Rsg - Tactile tool breakage monitoring - 2-station pallet changer - Transformer - Flushing gun

Year of construction: 2003, condition: excellent (used), Control: Fanuc/Matsuura i30 G-Tech X 500 mm Y 500 mm Z 500 mm Spindle revolutions 15000 rpm 240 ATC Pallets 300 x 300 mm Nos. pallets 5 SK40 IKZ 25-50 bar Measuring probe Tool breakage monitoring KSS cooling New spindle in 7/2022. Spindle hours 4800 h April 2021 - tool spindle spindle motor renewed May 2021 - changer arm of ATC repaired Dedpopwbfksfx Ag Rjkg July 2022 - tool spindle + motor renewed November 2022 - ATC drive repaired. The ATC, automatic tool changer, has been completely retrofitted. The housing is the original, the wear parts like e.g. bearing, lever, cam discs etc. have been renewed. Machine is in very good working condition and partly retrofitted. It can be inspected working under power. Technical indications, subject to error.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel Djdpslz Rvlofx Ag Rekg 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2003, Machining Centre Manufacturer: Matsuura Model: H Plus 405 PC6 Year of manufacture: 2003 CNC control: Fanuc G-Tech 16i Travel (X/Y/Z): 600 x 600 x 600 mm Table size: 500 x 500 mm 6-position pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure unit Internal coolant 70 bar Dsdoltlx Njpfx Ag Rekg 101225ä

Condition: good (used), Year of construction: 2009, machine/vehicle number: 18037, table width: 500 mm, table length: 500 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 70 bar, Year of construction 2009, last maintenance 2020 Fanuc control 30i Dkedpjq D Arljfx Ag Reg Tool magazine for 400 tools Round pallet storage for 12 pallets 2 pallets 500mmx500mm included 10 additional pallets for 3000€/each Glass scale on X- and Z-axis (deactivated on Y-axis) Spindle up to 10,000 rpm, last spindle replacement July 2019 Spindle holder SK40 DIN 69871 Big+ Spindle motor 36/24 kW Max. Torque 254 Nm up to 900 rpm Knoll coolant system Scraper belt chip conveyor 24 l / min at 70 bar, tank capacity 1300 liters

Condition: used, Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, workpiece weight (max.): 400 kg, total height: 2,640 mm, total length: 5,870 mm, total width: 3,440 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 15,000 rpm, overall weight: 11,300 kg, Equipment: documentation/manual, Horizontal machining centre Dkedpfx Agsxd Az Ae Rjg CNC Control Matsuura G-tech 16i Pallet table size 500x500 mm Movement X-Y-Z-Axis 600x600x600 mm Magazin capacity 240 Number of pallets: 6 Table load 400 kg Spindle speed 15000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, 5-AXIS MATSUURA MAM72-25V VMC Category: Vertical Machining Centers (VMC) Reference No.: 3651 Year of Construction: 2004 Technical Specification: SPINDLE Spindle Taper : BT 40 WORKING CAPACITY Djdex Anlwopfx Ag Rjkg Travels (XYZ) : 550 x 410 x 450 mm CNC Control : Fanuc 30i

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Fanuc, Velocity Control Unit from machining center Matsuura MS-710 V -Type: A06B-6035- H422 H423 -Number: 2x servo module available -Price per piece Dkodshtryiepfx Ag Reg -Dimensions: 500/260/H155 mm -Weight: 6.6 kg

Year of construction: 2005, condition: used, Empty weight: 10.000 kg Dimensions (LxBxH): 220 x 270 x 250 cm Price: On request Lots of accessories! Includes - probe Includes - 3 vices - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 16286 - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 2 - X-axis travel [mm]: 550 - Y-axis travel [mm]: 410 - Z-axis travel [mm]: 460 - Table length [mm]: 860 - Table width [mm]: 400 Dkjdpfjxdc Szox Ag Rjg - Tool holder: BT40 - Max. spindle speed [rpm]: 15000 - Options: Probe - Transport dimensions: 2200mm x 2700mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Matsuura G-Tech 30i, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -220 °, swivel angle B-axis (max.): 220 °, TECHNICAL DETAILS X-axis: 550 mm Y-axis: 410 mm Z-axis: 450 mm B-axis: ±220° C-axis: 360° CNC control: Matsuura G-Tech 30i Spindle and tool Speed range: 20,000 rpm Tool holder: BT40 Tool length: 300 mm Tool diameter: 150 mm Tool weight: 10 kg Workpiece capacity Workpiece diameter: 300 mm Workpiece weight: 40 kg MACHINE DETAILS Machine dimensions (W x H x D): 3,032 × 5,120 × 2,705 mm Power consumption: 32 kVA Dkjdpev Rb Hhjfx Ag Rsg EQUIPMENT - Internal cooling system - Automatic pallet changer - Automatic Tool changer - High-pressure cooling 20 bar - Chip conveyor - FSE chip control

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5,00,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Dodsxwm Adepfx Ag Rokg Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 4240 mm Measurements depth 8200 mm Measurements height 3400 mm Machine weight 19000 kg Main Drive Dsdpfxjx D Rv Ij Ag Rjkg Number of axis 5 Workpiece Workpiece weight 500 kg Tools Max weight 10 kg This 5-axis Matsuura MAM72-70V was manufactured in 2021, designed for high-precision, complex part production in one setup. It features a 15,000 rpm spindle, optional 20,000 rpm, and BBT #40 taper for robust performance. The machine includes a 90-tool magazine, rapid tool change capabilities, and dual pallet system for enhanced productivity. Ideal for industries requiring utmost precision and efficiency. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2016, operating hours: 9,738 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Fanuc 31 iB, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 18 W, number of slots in tool magazine: 48, Manufacturer Matsuura Model VX-1000 Year 2016 Control Fanuc 31iB Data: Table size 1200 x 600 mm Table load 500 kg Traverses X/Y/Z 1020/610/610 mm Rapids X,Y/Z 40,40/36 m/min. Spindle taper ISO 40 Spindle drive motor 18,5/15 kW AC Spindle speeds 40 – 15000 rpm Tool taper BT-40 Big plus Tool magazine positions 48 station Tool diameter with/without adjacent tools 96/150 mm Tool length 350 mm Tool weight 10 kg Machine dimension LxWxH 2,52 x 2,85 x 3,4 m Dedpfx Aowtfu Heg Rjkg Machine Weight 8.000 kg Equipment: Chip conveyor, coolant through the spindle 20 bar, 8 extra M-Functions, Renishaw Probe OMP 60, Tool breakage control.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 580 mm, Matsuura MAM72 – 35V (5 axis) CNC Machining Centre Dkodjx H Aagepfx Ag Rsg Year: 2006 Control: Matsuura G-Tech 16i Model: MAM72-35V Travels X/Y/Z: 550 / 440/ 580mm Travels B/C: +65 – 110 degrees / 360 degrees Working Surface: 130mm dia. Max. Work Size: 350mm dia. x 300mm H Loading Capacity per pallet: 60 kg Spindle Speed: 15,000 RPM Spindle Taper: BT 40

Condition: used, Year of construction: 2001, x-travel 660 mm y-travel 460 mm z-travel 500 mm table dimensions 940 x 460 mm Control Yasnac J300 spindle tunring speed 12.000 U/min tool taper BT 40 number of tool places 30 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Dksdpfjxxmmrox Ag Rog Prior sale is reserved.

Condition: used, x-travel 760 mm Dkedpfxsxxb I De Ag Rog y-travel 410 mm z-travel 500 mm

Year of construction: 2004, condition: good (used), Traverses X Y Z; 680 x 394 x 625mm, B axis -110/+ 65 degrees, C axis 0.001 degrees, pallet diameter 130mm, maximum workpiece diameter 300mm, maximum workpiece height 250mm, number of pallets 40, spindle taper BT40, 240 Station ATC, spindle speed 12000rpm, Dedpfx Agem H Uyze Rskg Fanuc G-Tech 16I control, through spindle coolant, and swarf conveyor.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 7800 mm Measurements depth 4700 mm Dodpfsx D Rv Usx Ag Rskg Measurements height 3200 mm Machine weight 12300 kg Main Drive Spindle speed range 12000 Number of axis 5 Workpiece Workpiece weight 60 kg Tools Max weight 10 kg Additional Equipment High precision machining for complex parts Enhanced productivity due to high-speed spindle and rapid movements Environmentally friendly and safe design with low noise levels Advanced control system features to maintain accuracy and reduce downtime This 5-axis Matsuura MAM72-35V was manufactured in 2021, designed for high-precision, complex machining. Features include a high-speed spindle up to 12,000 rpm, a 60-slot tool changer with rapid tool change time, and robust construction for handling diverse materials. Ideal for demanding sectors like aerospace and medical. If you are looking to get high-quality milling capabilities consider the Matsuura MAM72-35V machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 981113378, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, torque: 518 Nm, workpiece weight (max.): 900 kg, total height: 3,267 mm, total length: 5,850 mm, total width: 4,860 mm, overall weight: 18,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 20,000 W, type of input current: AC, Equipment: documentation/manual, The manufacturing machine will be available in January 2026! Control type: YASNAC CNC control J300M. We are happy to assist you with inquiries by phone. Dedpfew Sv Itox Ag Rskg

Year of construction: 2011, condition: excellent (used), 5 axes machining center FANUC G-Tech 30i Working travels 550x410x450mm B-Axis table +/- 110° A-Axis table 360° Spindle taper BT40 Big Plus Spindle speeds -15000 rpm Tool changer 40 pos Palett places 2x Durchmesser 250mm Coolant through spindle 3D measuring probe Tool measuring device Paletts no 15 Tool holders approx 80x KNOLL / TURBO coolant device MARCELS MASCHINEN CH Dksdsgufmropfx Ag Rjg

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available Dkedpfx Asxr A Edjg Rsg

Condition: good (used), Year of construction: 2019, functionality: fully functional, Manufacturer: Matsuura Model: H.Plus-504 CNC: Matsuura G-Tech 31i Dksdoxyiixopfx Ag Rjg Year of manufacture: 12/2019 X-axis: 730 mm Y-axis: 730 mm Z-axis: 800 mm B-axis: 360° Max. workpiece: Ø800 mm x H1000 mm and 750 kg per pallet Spindle speed (min⁻¹): 12,000 SK40

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,911 h, General Data Measurements width 1500 mm Measurements depth 2200 mm Measurements height 2250 mm Control Unit Brand FANUC Model 30 iM Main Drive Dodpfx Agjx D Shre Rskg Spindle speed range 50-15000 min Tool taper BT40 Media Chip conveyor Yes Additional Equipment Tool changer with 40 stations (chain) Pallet changer for 2 pallets, 130 mm diameter Replacement pallets Capto C6 KNOLL coolant system with coolant supply through the spindle and pump KTS25-50T / Coolant shower with a capacity of 100 l/min at 1.4 bar 2 spiral chip conveyors Renishaw measuring probe OMP60 / Renishaw laser system TRS-1 Rotating viewing window, electric / For the control: programmable mirror, coordinate system rotation, IZ2/150NF HSC precision control for simultaneous 5-axis machining CE mark This 5-axis Matsuura MAM72-25V was manufactured in 2006. Ideal for complex and precise machining tasks, this vertical machining center offers enhanced flexibility and productivity for your manufacturing needs. Consider the opportunity to buy this Matsuura MAM72-25V vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 800 mm Y-Axis Movement 550 mm Z-Axis Movement 550 mm This 3-axis Matsuura V.PLUS-800 was manufactured in 2003. It features a spacious table of 1150mm x 550mm with a loading capacity of 500kg, and a robust spindle speed ranging from 40 to 12,000 RPM. Ideal for precise and heavy-duty machining. If you are looking to get high-quality milling capabilities, consider the Matsuura V.PLUS-800 machine we have for sale. Contact us for more information. Dsdpfx Agsx D I D Nj Rjkg Application Types Milling