Used Maximart Cnc for sale (8,356)

Condition: used, Year of construction: 2021, DOOSAN LYNX 2100 LSYA Year of manufacture: 2021 Control: Siemens SINUMERIK 828D touch Turning diameter: 300 mm, Turning length: 510 mm, Axis travels: Z - 560 mm Psdpfxsxny Axo Aahorc X - 205 mm Y - 105 mm Bar capacity: 51 mm, Hydraulic chuck: 6 inch 4500 rpm, 24-position turret, Spindle motor: 12.5 kW, Milling: 6000 rpm, 2x C-axis Sub spindle -part conveyor, -part catcher, tool probe, chip conveyor.

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Pjdpfxexgfbqj Aaherc

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° Prsdpew E Nnbefx Aahec rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Equipment and technical data: Travel paths: - X-axis: 2,685 mm - Y-axis: 1,095 mm - Z-axis: 140 mm Milling unit: - 6 kW, water-cooled - Tool holder: HSK 63 F - Speed: 1,000 - 18,000 rpm Tool changer: 6-position, side-mounted Drilling head: - 9 vertical drilling spindles, 32 mm pitch - Horizontal spindle: 1+1 - Vertical spindle: 1+1 Grooving saw in X direction Control: Twin CAM 32 Vacuum pump: 100 m³/h Includes vacuum suction cups Dimensions: 5,200 x 2,843 x 1,855 mm Prsdpfx Aajwka H Eshjc Weight: approx. 3,500 kg Availability: by arrangement Storage location: Röllbach

Condition: used, Year of construction: 1995, turning diameter 450 mm turning length 1.125 mm control FANUC MSC 518 turning diameter over bed 520 mm bar material dia. 70 mm x-axis 260 mm z-axis 500 mm spindle tunring speed 30 - 3.000 U/min spindle nose JIS A2-8 spindle bore 80 mm spindle bearing diameter 130 mm Number of tools in turret 12 rapid travel - longitudinal/face 15 m/min power capacity 15/11 kW total power requirement 42 kW weight of the machine ca. 5 t dimensions of the machine ca. 3,6 x 1,7 x 1,8 m In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - LG 10 portal loading system with workpiece stacking device up to D=200 and max. 10 kg Prsdpfxsxr Rbys Aahoc - Kitagawa 250 mm power chuck - Hollow clamping device - Chip conveyor - High-pressure cooling 5 bar - Tailstock Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2022 Control : Siemens 828D - ShopTurn Turning diam. : 395 mm Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):20 kW Torque (max.):169 Nm Bar capacity:67 mm Workpiececlamping:3-Jaw chuck, Samchully MH-208 BVI Subspindle: Technology:Motorspindle Speed:6.000 rpm Power (max.):7,8 kW Torque (max.):45 Nm Workpiececlamping:3-Jaw chuck, Samchully HS-06VI Movement in B:580 mm Rapid travers in B:24 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:BMT55 Tooldive:5.000 rpm, 9,3 kW, 44 Nm Movement in X/Y/Z:235/105/580 mm Rapid travers in X/Y/Z:24/10/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Oilskimmer and Highpressure, 10bar Toolmeasurement:Automatic Measuringarm Rawmaterialfeed I:Interface Barloader prepared Rawmaterialfeed II:Automatic Working Door and Interface Robot prepared Finsihedpartremoval:Part catcher with collecting box Setup operations:Electronic Handwheel Further Equipment:Trafo Prsdpfx Aaexribrohjc

Year of construction: 2007, condition: excellent (used), Used CNC machining center incl. hedgehog buffer Manufacturer: Weeke Type: Optimat BHX 500 year of construction 2007 Technical data: Workpiece length min. - max. mm 200 - 2500 workpiece width min. - max. mm 70 - 1000 Prodpfxsiy Di Io Aahsc workpiece thickness min. - max. mm 4 - 80 Workpiece stacking max. pcs. 2 Configuration 2V36, 2H8X/2Y, N2 X-Y 90, F2-ETP-6 KW Drilling spindles vertical per side, pcs. 36 Drilling spindles horizontal per side, in X-direction 8 Drilling spindles horizontal per side, in Y-direction 2 Grooving saw X-Y swiveling 90°, per side YES Milling spindle, per side, kW 6 Integrated options - Extension package vertical drilling spindles - Insertion table with automatic workpiece feeding and positioning - Length measurement in the machine - barcode software - Hedgehog buffer (description below) Technical data hedgehog buffer Number of buffer places 30 Workpiece dimensions length 250 - 3000 mm width 100 - 1000 mm Thickness 12 - 80 mm Length over all Approx. 5700 mm Useful width Approx. 2000 mm Takeover height Approx. 950 mm Pick-up height / document height Approx. 1120 mm Pitch Approx. 125 mm

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse Predpfxsxp Hmas Aahoc - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: C112239, travel distance X-axis: 5,200 mm, Emmegi, Twin Electra Sun TU/5 CNC twin head mitre saw. Cutting lenght: 5200mm Blade 500mm Pjdpfx Aexrg Shjahsrc

Condition: used, Year of construction: 2019, CNC MACHINING CENTER morbidelli m100 – 4-axis version Drilling and milling made for you! This numerically controlled machining center is equipped with a comprehensive range of accessories for milling and drilling applications, meeting every requirement in woodworking. Ø Powerful: featuring drilling spindles with 8,000 rpm and leading-edge technology, the most robust spindle on the market, with over 1,000 hours of maintenance-free operation. Ø Better equipped: the vacuum cups can be excluded and configured with the TV FLEX worktable to optimize the machine setup according to your needs. Ø Easier and more intuitive programming thanks to fully-integrated Cad-Cam MAESTRO CNC software. Ø More user-friendly: with the lowered frame, the worktable is always accessible; the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are required. Supporting Structure The supporting structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly rigid; the extra-wide support area is specifically designed to give the machine exceptional stability, ensuring continual precision regardless of the working conditions. No floor anchoring is necessary. The base provides a large, stable foundation for the movable gantry: the machining unit is therefore mounted on a balanced, stable, and resilient support capable of withstanding the highest stresses, ensuring top-quality performance and greater accuracy. The movable gantry is a solid single piece anchored to the base and travels on high-quality prismatic rail guides with recirculating ball carriages; the machining unit is attached and moves along the Y and Z axes via prismatic guides and recirculating ball carriages. The movement of the lower mobile unit (X axis) and the machining unit along the bar of the mobile unit (Y axis) is achieved through helical rack and pinion drive, assuring greater tooth-to-tooth engagement for higher acceleration and increased speed along X and Y axes. The bespoke helical gearing design reduces mechanical component wear and lowers noise levels. The vertical Z axis is driven by a ball screw, ensuring perfect load balance during dynamic operation and strong acceleration and deceleration. The main milling unit is directly mounted on the Z-axis carriage, delivering absolute finishing quality by eliminating any vibrations. Traverses along the X-Y-Z axes are powered by brushless motors with static inverters, ensuring: – Reduced machining times due to enhanced acceleration – Better positioning accuracy with high-resolution encoders – Automatic reference point setting upon machine startup thanks to absolute encoders – Virtually no general maintenance, as the brushless system is brushless. Axis movement management and all machine work elements are controlled via an industrial NS module with digital data transmission. Psdpfx Ajxrpldoahjrc

Condition: new, Year of construction: 2025, Spindle speed: 4460min-¹ Min. workpiece dimension X: 300mm Min. workpiece dimension Y: 90mm Min. workpiece dimension Z: 10mm Max. Travel speed X axis: 20m/min Max. tool diameter: 35mm Max. Workpiece dimension X: 3000mm Max. Workpiece dimension Y: 900mm Max. Workpiece dimension Z: 50mm Grooving saw speed: 5700min-¹ Dimensions: 3704mm x 1455mm x 2209mm (L x W x H) Psdol D Rw Nepfx Aaherc Nominal width of external suction nozzle: 120mm Power drive motor: 2,2kW Weight: 1200kg

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A Psdpfx Aoxrvmnsahsrc weight of the machine ca. 3,8 t

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Pjdpsxn Dmbefx Aaherc Application Types Punching

Condition: used, Year of construction: 2000, Turning length 1000 mm Max. swing 640 mm dia. Max. turning 540 mm dia. Spindle bore 51 mm Max. Spindle speeds 4000 rpm (same for subspindle) Prsdpfop Ui N Hjx Aahec Max. spindle speeds on milling spindle 6000 rpm No. of stations in tool changer 40 pcs. Control: PC Fusion 640 MT Equipped with: Gantry loader 10 pcs. tool holders

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: M275603, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Pedpfx Ajxrg R Roahsrc Cutting lenght: 6200mm Blade 500mm

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, First installation in 2023 Controller OPS-P300LA control system Swing diameter: 450 mm Center distance: 500 mm Max. turning diameter: 230 mm X-axis: 165 mm Z-axis: 470 mm Number of turrets: 1 Turret design: V12 Tool positions: 12 Driven tools: none Max. cutter cross-section: 25 x 25 mm Max. drill diameter: 32 mm Speed ​​range: 45–5000 rpm Spindle bore diameter: 62 mm Tailstock: yes Parts catcher: yes Prepared for bar feeder magazine: yes The machine is barely used and available for immediate purchase. Live in Hungary. Prjdexpfn Ajpfx Aahec

Condition: good (used), Year of construction: 1990, functionality: fully functional, CNC Lathe BOEHRINGER VDF 250 C Year of manufacture: 1990 CNC control: PHILLIPS GRUNDIG Working area: Swing diameter over bed: 550 mm Swing diameter over cross slide: 480 mm Travel (X-axis): 405 mm Travel (Z-axis): 1,099 mm Prsdpfxjwu Rbue Aahoc Max. turning length: 2,000 mm Turret: Number of positions: 12 Mounting: VDI 50 DIN 698800 Driven tools: No Headstock: Spindle head size: 8 DIN 55026 Front bearing diameter: 150 mm Spindle bore: 103 mm Max. chuck diameter: 315 mm Drive power, 50% duty cycle: 53 kW Max. torque: 780 Nm Spindle speed range: 30 – 3,000 min⁻¹ Feeds: Cross slide (X-axis): 10,000 mm/min Longitudinal slide (Z-axis): 10,000 mm/min Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 10 m/min Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L x W x H) approx.: 6,400 x 3,200 x 2,400 mm Machine weight approx.: 13,500 kg

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Prsdpfx Aew Sy R Ejahoc Storage location: Customer

Condition: used, 1 unit Hydraulic Guillotine Shear ERMAKSAN CNC HGD 3100x10 Psdpexrch Ejfx Aahsrc Cutting length approx. 310 cm, as per photos and inspection, self-dismantling Color: grey Year of manufacture: 2014 Condition: used Payment method: advance payment by bank transfer Location of goods: Hall 1 and rack in outdoor area Shipping: Collection only – No shipping offered for this item!

Condition: used, Year of construction: 2012, turning diameter 300 mm turning length 300 mm control Fanuc Oi-TD greates pass round over bed 550 mm spindle passage 45 mm spindle speed: 6000 U/min spindle motor 11/7,5 kW no. of tools in turret 1 12 Prsdpfx Aexrgtrjahsc rapid traverse 36/36 m/min range L-W-H 3,9 x 1,65 x 2,0 mm chip conveyor ja/yes Number of working hours 3527 h weight of the machine ca. 3300 t CNC lathe Hwacheon CUTEX 160A, built in 2012 12-station tool turret Fanuc 0i TD control Manual Guide user interface Foot switch for clamping devices Fanuc drives Chip conveyor Automatic tailstock Programmable quill Hydraulic unit Electric handwheel Coolant system 6 BAR Central lubrication Standard tool holder Tool measuring arm Tool life monitoring Oil mist extraction system Accessories: 7 boring bar holders, 1 Kitagawa B-206 chuck Chuck Ø 169 mm Technical data: • Swing diameter over bed: 550 mm • Max. turning diameter: 300 mm • Standard turning Ø 170 mm • Max. turning length: 300 mm • Chuck size: 6" Spindle • Spindle nose (ASA): A2-5 • Max. spindle speed: 6000 rpm • Spindle bore Ø: 56 mm • Max. bar capacity Ø: 45 mm • Spindle motor: 11/7.5 kW Turret • Number of tool turret stations: 12 positions • Turret change time (s/stations): 0.15 Feed rates • Rapid traverse X-axis: 36 m/min • Rapid traverse Z-axis: 36 m/min • Max. travel X-axis: 170 mm • Max. travel Z-axis: 335 mm • Feed motor X/Z: 3.0/1.8 kW Tailstock • Quill diameter: 60 mm • Quill stroke: 80 mm • Taper bore/tailstock mount: 4 MK Translated with (free version)

Condition: used, Year of construction: 2004, CNC-swiss type automatic lathe brand: STAR type: SB-16 new in: 2005 equipped with: FANUC 18i-TB control subspindle driven tools c-axis back working Prjdpsxry R Defx Aahec high pressure pump chip conveyor parts conveyor barloader FMB minimag 18

Condition: ready for operation (used), Year of construction: 1999, General Data Measurements height 2860 mm Machine weight 3800 kg Control Unit Brand MITSUBISHI Main Drive Spindle speed range 12000 rpm Spindle motor power 7.5/5.5 kW Tool taper 7/24, No. 40 Prsdpfx Ajxpytajahjc Movement X-Axis Movement 510 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Table Number of tslots 5 Table load 350 kg Tools Number of index 25 Max weight 6 kg Max tool diameter 100 mm Max tool length 250 mm Media Power consumption 22.5 kVA Additional Equipment APC (Automatic Pallet Changer) - Only for CV-500A (APC): Number of Pallets: 2 Pallet Change Method: Front rotation This 3-axis MORI SEIKI CV-500 was manufactured in 1999. Ideal for precision CNC milling, this machine maintains robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the MORI SEIKI CV-500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, 1 unit CNC steel tray bending and folding machine W62K-5X3200 Working length approx. 320 cm, max. working thickness 5 mm, operating hours approx. 2h, as per pictures and inspection, self-dismantling Color: grey/blue Podpfx Ajxrcgbsahsrc Condition: used Payment method: advance payment by bank transfer Storage location: Hall 1 Shipping: Collection only – no shipping offered for this item!

Condition: used, 1 unit CNC vertical drilling machine YUANXING KT-200 Travel distances: X 850 mm, Y 600 mm, Z 240 mm, max. drilling diameter 40 mm, incl. machine vise, tool cabinet, workbench and various accessories, as per photos and inspection, self-dismantling required Color: grey Condition: used Payment method: advance payment by bank transfer Prjdpfxoxrcdtj Aahoc Goods storage location: Hall 1/Enclosure Shipping: Collection only – no shipping offered for this item!

Condition: used, 1 pc CNC milling machine SHINRI ZK5140C-3 with machine vise, tool cabinet and various accessories, as shown in the pictures and subject to inspection, self-dismantling. Color: blue. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 1/Enclosure. Shipping: Collection by buyer only - Shipping is not offered for this item! Prodpfxexrcbfj Aahec