Used Mechanical Dryer for sale (8,263)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Bwsdpfxev Si Sze Ac Djw Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Bodpfoyzruijx Ac Deww Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 12800/283.2005, The unit is made of stainless steel, is in good working order, and is stored in a dry and warm hall. Technical documentation is available in paper form in German/English. Key technical data is provided below: Drying drum diameter: 1200 mm Electric heating power: 84 kW Drum length: 4000 mm Drum rotation speed: Continuously adjustable Bedpfo Agftfsx Ac Djww Drive motor power: 1 kW Extruded material drying capacity: 240-550 kg/h Description: The system offers highly efficient infrared radiation drying, thanks to the use of electro-quartz elements – radiators made of high-quality quartz glass and coated with a reflective layer of gold. The unit is made of stainless steel, and the drum is coated with a PTFE layer, ensuring the processing of exceptionally sticky, coated extruded materials. The drum moves on silent support rollers; the system meets safety requirements and reduces energy losses.

Condition: used, Year of construction: 2016, Two used, air-cooled compressed air refrigeration dryers in good external condition, with inspection labels valid until 2025. Manufacturer: Ingersoll Rand Model: D1890EC-A Bsds Ahyn Dopfx Ac Deww Series: D-EC Premium Efficiency Machine type: Compressed air refrigeration dryer Year of manufacture: 2016 / 2017 Air flow rate: 31,500 l/min (1,890 m³/h) Electrical power: 6.79 kW Voltage supply: 400 V / 3 phases / 50 Hz Refrigerant: R407C Refrigerant charge: 4.2 kg Maximum air inlet pressure: 13 bar Maximum refrigerant pressure LP/HP: 18 / 29 bar Air inlet temperature: +5 to +60 °C Ambient temperature: +2 to +45 °C Sound pressure level: 78 dB(A) Connection size: 3 inches Control: Electronic control with digital display Cooling: Air-cooled Condition: Used, good external condition Inspection: Inspection labels valid until 2025 are available Available quantity: 2 Location: Rehweiler

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Bodpfoyvfkrsx Ac Dsww Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Condition: excellent (used), functionality: fully functional, Granulate dryer with two drying containers, including KOCH material conveying equipment and suction lance. For sale is a used drying system for plastic granules with two drying containers and associated material conveying equipment. The system was used at an injection molding company for pre-drying PA6. Equipment and scope of delivery: - Two insulated drying containers on a common steel frame - One KOCH-TECHNIK vacuum conveying unit mounted on each container for material feeding - Large side cleaning openings with a sight glass for level monitoring - Material outlets at the bottom of the containers - Analog temperature indicators at the air connections - Separate drying unit with fan, filter, and control cabinet - Digital temperature controller GOSSEN D1 - Control panel with operating and fault indicators, as well as indicators for drying and regeneration - Existing air piping and connecting hoses - Suction lance with conveying hose The side cleaning openings provide good access to the inside of the container. Drying containers and drying unit are mounted on separate steel frames. Bwodpe Afb Alefx Ac Dew Condition: Used, with visible signs of wear and tear due to age and use. Scope of delivery as described and shown in the pictures.

Condition: used, Year of construction: 1988, machine/vehicle number: 46922, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Sheet metal width: 2,050 mm Sheet metal thickness: 1.5 mm Frame width: 2,100 mm Frame overhang: 100 mm Table width: 300 mm Performance data Stroke rate under load: 50 strokes/min Total power requirement: 4.0 kW Machine weight: approx. 1.85 t EQUIPMENT Manual back gauge, 550 mm 1 side gauge Bwodps Aa A T Isfx Ac Dsw 2 support arms Foot switch

Condition: used, machine/vehicle number: 739791201, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Bwodpfxs Aa A Nis Ac Dow Working area Sheet metal width: 2,040 mm Sheet metal thickness: 3.25 mm Stand distance: 2,200 mm Performance data Total power requirement: 7.5 kW Dimensions Space requirement: approx. 2.55 x 2.3 x 1.4 m EQUIPMENT Rear stop Front support arms Emergency stop Foot switch Piece counter

Condition: used, sheet width 1060 mm plate thickness 1,5 mm Bedo Ahrzbspfx Ac Deww

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 liters Heating capacity: 4.5 kW Fan power: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Bedpfx Aey N T Utsc Djww Transport height: up to approx. 3000 mm Device weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available PRICE REDUCTION FROM 1350 TO 1200 EUR per unit!

Condition: as good as new (ex-display), Year of construction: 2024, machine/vehicle number: SLHJ-120LK/100, functionality: fully functional, operating hours: 10 h, power: 10.85 kW (14.75 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total length: 1,320 mm, total width: 840 mm, total height: 1,680 mm, fuel type: electric, Equipment: CE marking, documentation/manual, SML SLHJ-120L-100 dry air dryer, compact design. Combines drying, dehumidifying, and transporting of granules. Suitable for hygroscopic plastics and optical applications. Technical specifications: - Drying hopper capacity: 120 L - Drying rotor air volume: 100 m³/h - Drying heating power: 5 kW - Drying blower: 0.75 kW - Regeneration blower: 0.18 kW - Regeneration heating: 3.2 kW - Transport blower (vacuum): 1.1 kW - Pipe diameter: 38 mm - Dimensions (L x W x H): 1265 x 850 x 1680 mm Bwodpfx Aco Ad Ey Es Dew - Weight: 324 kg Features: - Closed dehumidification circuit; dry air does not come into contact with outside air - Closed transport system; dried material does not absorb moisture during transport - Shut-off valve in the transport pipe; no residual material remains in the pipe - Double-walled, insulated drying hopper - Heat exchanger for low temperature and dew point of the process air Available for immediate delivery from stock in the Netherlands.

Condition: good (used), Year of construction: 2001, Digicolor dryer Year of manufacture: 2001 Bwodpfx Ao Ag Svvjc Djw 10,000 watts With container, approx. 200 liters Model: DT 204 M

Condition: used, Year of construction: 1973, sheet width 1500 mm plate thickness 5 mm weight 3,8 t Bwsdpfx Ajzxt Trsc Djw

Condition: used, Little used European Spraydry Technologies model 8 - 19 Tall Form Spray 304 stainless steel ATEX rated spray dryer system. Mass balance design capabilities approximately 246kgs feed @ 10% solids with 26kgs Powder @ 5% residual moisture + 220kg/h water evaporated based on Potato Proteins. Inlet temperature 190 deg.c. with exhaust temperature 90 deg.c. Mass flowrate of drying air rated 6,895kg/hr. System includes the following parts: (1) Airco model CHP inlet fan driven by 11kw motor. (1) Lanemark model DB07 propane burner with control panel. (1) Tall form spray dryer chamber with conical base fitted with dislodging hammers fitted to cylinder and cone. Access/inspection doors. Explosion suppression bottles. (1) Stainless steel feed lance with pressure nozzle. (1) 304 Stainless steel product cyclone with explosion suppression bottles. Includes DMN Westinghouse type AL250DairyMZC-11 APS rotary lock value with motor. (1) Exhaust air chamber with explosion suppression bottle. Bodjz D Efnjpfx Ac Djww (1) Gough type GBS550 stainless steel vibratory sifter/screen, mounted on stainless steel mobile frame. (1) Feed balance stainless steel vertical vessel. (1) FBF Italia model FBF2004/P High pressure plunger pump. (1) Mettler Toledo type V4-REM industrial flow-though metal detector with Piab conveying system. (1) Airco type CHP825 exhaust fan driven by 30kw motor. (1) Robbe model Atlas filling machine for bags with controls. Various small scale circulation pumps, pipework, instrumentation and ducting available. System has now been removed from installed production position and ready for loading Specifications: Material Of Construction: 304 Stainless Steel Type Of Spray: Nozzle

Condition: good (used), Year of construction: 2005, Drying machine, DIGICOLOR Bwedps Ag Sygsfx Ac Dsw Year of manufacture: 2005 Model: D 204 10100 W

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: type plate available, KAESER TE 91 Refrigerant Dryer – Compressed Air Refrigerant Dryer – R134a – 16 bar Bjdpfoz Eqdrsx Ac Deww Manufacturer: KAESER KOMPRESSOREN Type: TE 91 Year of manufacture: 2012 Serial number: 3160 Article number: 1.8008.50010 Capacity: 9100 l/min Refrigerant: R134a Refrigerant charge: 1.950 kg Max. operating pressure of air system: 16 bar Supply voltage: 400 V / 3 phases / 50 Hz Rated current: 3.5 A Permissible ambient temperature: +3 °C to +43 °C

Condition: good (used), Year of construction: 2018, temperature: 95 °C, inner dimension length: 7,700 mm, inner dimension width: 10,000 mm, inner dimension height: 3,200 mm, total length: 10,026 mm, total width: 10,230 mm, total height: 4,710 mm, number of chambers: 3, control type: manual, actuation type: electric, fuel type: electric, # For Sale – Hamech SK-185 Industrial Wood Drying Kiln Complex (3 Chambers) For sale: Complete Hamech SK-185 industrial wood drying kiln complex, consisting of 3 drying chambers. The installation was commissioned in 2018 and is CE certified. The drying kiln complex is still in continuous operation and can be inspected while running at our facility. ### General Information - Manufacturer: Hamech - Model: SK-185 - Number of drying chambers: 3 - Year of commissioning: 2018 - CE certified ### External Dimensions (per chamber) - Width: 10.23 m - Depth: 10.26 m - Height: 4.71 m ### Internal Chamber Dimensions - Width: 10.00 m - Depth: 10.03 m - Height: 3.20 m ### Maximum Loading Space Dimensions - Width: 10.00 m - Depth: 7.70 m - Height: 3.20 m Bedpfe Afx Nqsx Ac Dsww ### Technical Specifications (per chamber) - Maximum drying temperature: 95°C - Maximum heating system pressure: 0.6 MPa - Humidification system pressure: 0.2–0.3 MPa - Average thermal power consumption: 345 kW - Electrical power consumption: 25.5 kW - Humidification system capacity: 210 l/h - Loading volume: 148 m³ Detailed technical specifications are available upon request. Location: Andrychów, Poland Feel free to contact us for more information or to arrange an on-site inspection. The drying kiln complex can be viewed during operation.

Condition: used, Used compressed air refrigeration dryer MTA DE225 for drying compressed air in industrial compressed air systems. Manufacturer: MTA S.p.A. Type: DE225 Year of manufacture: 2006 Serial number: 2200091067 Voltage: 400 V Phases: 3 Frequency: 50 Hz Installed power: 6.0 kW Maximum current draw: 11.0 A Protection class: IP22 Refrigerant: R134a Refrigerant charge: 4.72 kg Maximum permissible refrigerant pressure, low-pressure side: 22.6 bar Maximum permissible refrigerant pressure, high-pressure side: 26.0 bar Maximum operating pressure, compressed air: 16 bar Maximum operating temperature, compressed air: 70 °C Ambient temperature: +5 to +50 °C Sound pressure level: < 70 dB(A) Bwedpfx Aco Ahyx Uj Dew Weight: 610 kg Refrigeration compressor: Maneurop MTZ80HP4A Control: Electronic with display Condition: Used

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, volume flow: 858 m³/h, total width: 1,060 mm, total length: 1,530 mm, total height: 1,513 mm, pressure: 16 bar, overall weight: 600 kg, operating pressure: 16 bar, input voltage: 400 V, type of cooling: air, pressure (max.): 16 bar, power: 1 kW (1.36 HP), input frequency: 50 Hz, Equipment: type plate available, compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Bsdpjyfpbtjfx Ac Djww Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

Condition: defective spare-parts repository (used), Year of construction: 2021, operating hours: 981 h, machine/vehicle number: 101780.0, Defective Kaeser Aircenter SX 6 – 11 bar rotary screw compressor with integrated refrigeration dryer with 200-liter air receiver with Sigma Control 2 controller with Kaeser F6KE filter incl. ECO-DRAIN with Kaeser F6KA activated carbon filter The compressor is functional, but the screw airend makes loud noises. Therefore, the system is sold as defective / for parts. Year of construction: 11/2021 Operating hours: 981 h Max. pressure: 11 bar Rated power: 4.0 kW Free air delivery (FAD) at 10 bar: 0.49 m³/min Sound level: 61 dB(A) Air outlet: 3/4" Air receiver: 200-liter capacity Pressure dew point (refrigeration dryer): + 3°C Bwjdez Sz Tfspfx Ac Djw Condensate drain: level-controlled ECO-DRAIN Dimensions (L x W x H): 590 x 1090 x 1560 mm Weight: 290 kg Convenient leasing options available for new machines via our house bank. Visit our retail store. We always stock a large selection of new and used compressors!

Condition: used, Year of construction: 2002, machine/vehicle number: 1620, functionality: fully functional, pressing force: 9,500 t, table width: 500 mm, table length: 1,150 mm, DMS 40 Mechanical Press 400 kN 25 strokes per minute Bwodpfx Acjz Tzyze Dow Max capacity 9500 kg Max die dimensions 1150x500 mm

Condition: good (used), Year of construction: 2016, machine/vehicle number: AP I 260800, Offer 26334 Technical data: - Operating hours: 28407 h - Operating pressure: 12.75 bar Bodpfs Agr Ewjx Ac Dsww - Delivery rate: 1.95 m³/min - Drive: 400 V / 11 kW - Motor speed: 3000 rpm - Integrated dryer - Space requirement: approx. W 1500 x H 1600 x D 750 mm - Weight: approx. 420 kg

Condition: good (used), Year of construction: 2011, Refrigerant dryer, Kaeser, TE 91 – used: Bwodoz Sd Iyjpfx Ac Dew Price ex-works: €1,750 (net) plus dismantling costs, etc. Manufacturer: Kaeser Type: TE 91 Year of manufacture: 2011 Article number: 1.8008.50010 Serial number: 3027 Refrigerant: R134a Refrigerant charge: 1.950 kg Operating pressure: 18 bar, or 16 bar Max. operating pressure, air system: 16 bar 400V/3/50Hz Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2003, functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, input voltage: 400 V, power: 4.3 kW (5.85 HP), high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A Bwodpfx Acerfyrps Dew connection: DN80 machine dimensions: length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Bwodpfx Ace Agcime Djw Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth