Used Milling Head for sale (23,456)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Podpfjxx Uayex Ab Ierd Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Predpfxsxt Nzbe Ab Iod Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Pjdpfoxyidpjx Ab Iord Parts catcher Tool setting probe Dust extraction system

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, color: white, gearing type: mechanical, emission class: euro3, total length: 7,580 mm, total width: 2,990 mm, total height: 3,520 mm, Year of construction: 2024, Equipment: air conditioning, = Additional options and accessories = - Electrically operated mirrors - Spare wheel - Sun visor = Remarks = Model description: BARCELONA ASTRA HEAD 6×6 (HD9 66.48T) MY24 Tractor Head Code Diesel Type: HD9 66.48T GCW: 104 Ton Horse Power: 480HP Rear Axle Rate: 4229 Shipping Dimension: 7575 x 2990 x 3520 mm Gear Box Type: Manual Gearbox ZF, 16 forward and 2 reverse gears Rear Overhang: 800 mm Tyres: 14.00R20 Drive Hand: LH Drive Rear Differential Lock: Available wheelbase: 3800 + 1450 mm engine power: Cursor 13-470CV Reinforced Air Filter double stage with air intake on the cab roof Heated Fuel Filter Standard Parabolic Suspensions (Leaf-Spring type) with stabilizer bar on the 1st axle Standard Batteries Qty2 (180Ah each) with manual cut-off Standard Alternator 90Ah x 28V (2520 W) Air Suspended Driver Seat (adjustable) and Standard Passenger Seat (adjustable) Electric Doors' Windows with tinted glass Standard Manual Rear View Mirrors CE compliant Radio pre-arrangement Front Lights protection grids Front Manouvering Hook (at center of front bumper) Standard Tool Kit and Hydraulic Jack Towing Device Provision Reverse Gear Buzzer Anti-Roll Bar On 2Nd Rear Axle Predpfxsw Duiuo Ab Iod Anti-Roll Bar On 3Rd Rear Axle Reinforced Rear Suspensions Front Reinforcing Plate For Front Drive Axle Fifth Wheel 3,5" Tilting (Jost Jsk38G-1) Auxiliary Air Intakes On Left Side Close To Batteries Provision For PTO Control Reinforced Front Parabolic Suspension 9 Tons Fuel Pre-Filter Front Mirror Trailer Plug Adapter English Plate Standard Front Hood (Same Color Of Cab With Logo In Black) Rear Lights Protection Grids Inflation Kit For Tyres: Hose + Air Gun + Manomenter Wheel Chocks (Qty 2) = More information = Transmission: ZF, Manual gearbox GVW: 9.900 kg Engine type: Cursor 13-470CV Cargo space capacity: 300 l

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Mazak Inetgrex 100III Universal 9 axis Horizontal Turn-Mill Center Year Mfg 2010 Good conditions Control: Mazatrol 640 MT Pro Number Of Axes: 9 Swing: 470mm Turning Ø: 470mm Psdpfoxp Huqsx Ab Iord Center Distance: 735mm Travel (X): 360mm Travel (X) Lower Turret: 220mm Travel (Y): +/- 60mm Travel (Z): 785mm Travel (Z) Lower Turret: 780mm B-Axis Head Tilt: 225 Degrees Travel (W): 795mm C-Axis Index: 0.0011 degree Spindle Speed: 6,000 RPM Sub Spindle: No ATC: 40 , BT40 Chip Conveyor Tool Presetter Good working conditions

Condition: used, functionality: fully functional, Type: Universal milling machine Manufacturer: OBRABIAREK Psdpfxsxz Dwmo Ab Isrd Model: FNC-25D3 Serial Number: 4648 Condition: Used Quantity: 1

Condition: good (used), functionality: fully functional, spindle diameter: 30 mm, milling spindle length: 140 mm, height adjustment type: electric, type of input current: three-phase, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, SCM T130E Spindle Moulder Spindle diameter: 30 mm Spindle length: 140 mm Variable spindle speed: 3000/4500/6000/7000/10000 RPM Main motor power: 7.5 kW Predsxzyltjpfx Ab Ijd Electronic spindle height adjustment via switch 4-roller feed unit Feed speed adjustment via variator CE certificate DTR technical documentation

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus Podpfjxqrh Esx Ab Isrd weight of the machine ca. 12,5 t

Condition: new, Year of construction: 2025, functionality: fully functional, Table size 800 x 240 mm Table area 730 x 210 mm “T” slot size on table 14 (M12) Prjdpfx Abjxz D Npe Ied Speed ​​range 75 – 3200 rpm Drilling capacity in cast iron 45 mm Drilling capacity in steel 32 mm Longitudinal movement range (X) 560 mm Transverse movement range (Y) 190 mm Vertical travel range (Z) 350 mm Tool holders ISO40/Morze 4 Spindle - column distance 460 mm Distance between spindle nose and table surface 445 mm Spindle stroke 120 mm Total machine height in Z upper position 1450 mm Spindle can be tilted +/-90 degrees Spindle power 1.1/1.5 / 400V Machine weight 480 kgs Dimensions 1280 x 960 x 2100 mm Accessories - Thread cutting function - 3-way path measuring system - Y+Z axis covers - ISO40 drill chuck adapter - Built-in digital depth gauge - Automatic X-axis stepless feed and rapid traverse - Motorized gear lifting and lowering - Machine lamp - Cast iron machine base The machine is in brand new condition. Never used in production.

Condition: excellent (used), Tabletop Edge Bander JAROMA + Edge Trimmer with Cutting Unit Catalog No. 7729A Edge Bander Equipment: Prjdpfx Aoxa Eh Dsb Ijd - Band plate - Glue tank (granulate) - Tape feeder - Guillotine – preliminary trimming of edging - Pressure rollers: 2 pcs - Min. width of workpieces: 50 mm - Thickness of workpieces: 10–40 mm - Min. internal radius: 50 mm - Edging at an angle with 1 mm thick tape: 0–45° - Edge thickness: 0.3–3 mm - Electric feed - Total power: 2 kW - Compressed air pressure: 6–7 bar - Dimensions (L/W/H): 1700x1300x1550 mm - Weight: 310 kg Edge Trimmer: - Min. width of workpieces: 50 mm - Thickness of workpieces: 16–40 mm - Edge thickness: 0.5–3 mm - Motor power: 1.1 kW - Air requirement: 6 bar - Extraction nozzle: 60 mm - Dimensions (L/W/H): 1900x850x1450 mm - Weight: 290 kg Cutting Unit: - Blade diameter: 150 mm - Table dimensions: 750x820 mm - Motor power: 0.12 kW / 2800 rpm – Polish manufacture – Unpainted – DTR documentation – Very good condition – Used edge bander Net price: 11,000 PLN Net price: 2,620 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20025431, year of last overhaul: 2025, nominal power: 30 kW (40.79 HP), total height: 4,500 mm, REKORD B-SSt-ex Milling Plant – Explosion Protected, with ATEX Relief Valve -Suitable for: Sugar and substitutes (such as maltitol), Salt, Sodium glutamate, Malt, Cocoa, Milk powder -For installation and operation in ATEX dust zone 22 -Built entirely in stainless steel AISI 316L COMPLIANCE -EU Machinery Directive 2006/42/EC -EU ATEX Directive 2014/34/EC -EU Food Contact Directive EGV 1935/2004 Grinding Stock: -Product: Sugar and substitutes (such as maltitol), Salt, Sodium glutamate, Malt, Cocoa, Milk powder -Feed size: ≤ 1.5 mm -Final size: 95% ≤ 20–30 µm, adjustable by speed and feed rate -Throughput: 300–500 kg/h, depending on fineness PIN MILL -Design size: 315 mm -Housing: Pressure shock resistant, swing-out door with safety interlock -Grinding elements: Pin rotor and stator -Speed: 12,000 min⁻¹ / 200 m/s -Drive motor: max. 22.5 kW; IE3 -Bearings: Heavy-duty, auto-lubricated -Seal: Labyrinth gasket with sealing gas LOADING HOPPER WITH SECURITY SIEVE & ATEX ROTARY VALVE -Volume: 100 L -Stainless steel sieve (3.15 × 0.8 mm) removes lumps and impurities -Adjustable feed rate, factory set for target throughput -Pneumatic slide gate for fast outlet control -Flame-tight rotary valve, ATEX certified -Magnetic separator under valve -Pneumatic conveying to mill AGITATED BUFFER CONTAINER WITH FILTER -Free-fall discharge from mill to 200-L ATEX buffer (70–100 kg capacity) -Equipped with agitator and level control (auto stop at fill limit) -Pressure-shock resistant, protected by flame-free relief valve -Pulse-Jet filter with differential pressure monitoring -Compressed air system (tanks, tubes, valves) included -Suction blower for continuous air transport and product flow; purified air vented outside DISCHARGE SYSTEM Predoxql Swopfx Ab Isd -Screw conveyor with frequency-regulated drive -Flame-tight discharge rotary valve (ATEX) -Outlet for bag filling up to 55 kg or cart loading UTILITIES -Power: ≈ 30 kW, 3~400 V, 50 Hz, IP 55, TN-C -Compressed air (oil/water-free): 12–15 Nm³/h, ≥ 6.1 bar CONTROL UNIT -SIEMENS 15″ HMI and PLC S7-1200 -Ethernet data and error output to master control system -Remote maintenance capability -Drives: min. IP55, colour RAL 5017 -DANFOSS frequency inverters *Control cabinet installed outside explosion zone

Condition: used, Year of construction: 2007, Technical Specifications: • Power supply: 3-phase / 50 Hz • Voltage: 400 V • Control voltage: 24 V • Rated current: 68 A Included Equipment: • Bar feeder IEMCA Master 880 MP/33 L Serial number: 020721SA07 Year of manufacture: 2007 Air pressure: 6 bar Voltage: 400 V / 3 ~ / 50 Hz Current: 6 A Weight: 1,360 kg Manufacturer: IGMI S.p.A. (BUCCI Industries), Faenza, Italy Podsxnlv Ropfx Ab Ijrd

Condition: excellent (used), functionality: fully functional, milling spindle length: 750 mm, spindle stroke: 150 mm, type of input current: three-phase, milling length: 750 mm, Equipment: documentation/manual, Wigo 1016 Cross Milling Machine Working length: 750 mm Maximum milling height: 150 mm Prjdpfsxzimtsx Ab Iod Spindle diameter: 50 mm Spindle motor power: 15 kW Hydraulic pump motor: 3 kW Pneumatic material clamping Foot pedal control Machine dimensions: 1450 x 1600 x 1800h mm

Condition: excellent (used), functionality: fully functional, Blade diameter: 350 mm Maximum cutting capacity: 4000 mm Pneumatic tilting of the heads Number of speeds: 2 Maximum blade speed: 2820 rpm Motor power: 4.8 kW Machine dimensions: 5600 x 1800 x 2000 mm Machine weight: 1400 kg Predpoxzfa Njfx Ab Isd

Condition: used, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 350 mm, table width: 1,770 mm, table length: 3,550 mm, overall weight: 9,000 kg, total length: 5,890 mm, total width: 2,990 mm, total height: 3,125 mm, tool diameter: 140 mm, tool length: 200 mm, tool weight: 15,000 g, tool magazine motor power: 12,000 W, SPECIAL PRICE Prjdpfx Aboxdiups Iod Advanced Cnc Router for Drilling, Contouring and Shaping slabs in Marble, Granite, Quartz, Ceramic, Lapitec to create kitchen and vanity tops

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm Prjdoxa Egmopfx Ab Isd - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: ready for operation (used), Year of construction: 2003, Control Unit Brand SELCA Model SELCA 3040 Main Drive Spindle speed range 5000 Spindle motor power 22 kW Tool taper ISO 50 Number of axis 4 Movement X-Axis Movement 2000 mm Y-Axis Movement 1250 mm Z-Axis Movement 1250 mm Pjdpfswyyhhsx Ab Isrd Media Chip conveyor Yes Additional Equipment Remote handwheel Chip conveyor Through-spindle coolant This 3-axis Parpas THS125/2000TG was manufactured in 2003. It features a SELCA 3040 control unit, a main spindle with 5000 rpm and 22 kW power, and an electrospindle that reaches up to 28,600 rpm. The machine includes a 24-position tool changer and accessories like a chip conveyor and through-spindle coolant. If you are looking to get high-quality milling capabilities consider the Parpas THS125/2000TG machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2001, Technical Specifications: • Power supply: 3 Ph / 50 Hz • Voltage: 400 V • Control voltage: 24 V • Rated current: 76 A • Total power: 42 kW • Machine weight: 4,800 kg • Electrical cabinet weight: 440 kg Included Equipment: • Bar feeder IEMCA Master 880/33R P Serial number: 0200141S02 Year of manufacture: 2001 Supply voltage: 380 V / 3 Ph / 50 Hz Control voltage: 220 V / 24 V Power consumption: 6 A Machine weight: 120 kg Pjdpexnlk Uofx Ab Iord

Condition: used, Motor 6 / 7.5 kW Location: Nattheim Podpfx Abew Enw Ie Ierd

Condition: excellent (used), functionality: fully functional, Blade diameter: 450 mm Tilt right/left Pjdpfoxy Ifxex Ab Ierd Pneumatic tilting

Condition: excellent (used), Professional set of milling and drilling tool holders with SK40 / ISO40 taper, compliant with DIN 69871 A standard. The set includes approximately 25 ready-to-use tools with mounted milling cutters and drills. Tool diameter range: from Ø4 mm to Ø12 mm – an ideal set for serial production. Holder length: 50 mm – compact and precise, perfect for CNC machining centers. The set includes various tool types: end mills, taps, countersinks, solid carbide drills, and chamfer mills. Some tools are coated – suitable for machining steel, stainless steel, aluminium, and cast iron. All holders are used and in good technical condition – inspected and ready for immediate use. Products from renowned brands: ZÜRN Germany and Orion. Option to purchase the entire set or individual items. Prodpfxexldr Eo Ab Isd

Condition: not inspected (used), MAHO Tool Milling Machine MH 500 W 1 With AKTIV Digital Display 132 Year of manufacture: approx. 1985-88 Travels: X/Y/Z: 500 x 350 x 375 mm Spindle speed: 63 - 4,000 rpm, stepless Spindle taper: ISO 40 Podpjxz Rcvefx Ab Ierd Swivel table: 800 x 360 mm Feeds: 1 – 3,000 mm/min Rapid traverse: 5,000 mm/min Total power requirement: approx. 3 kW Weight: approx. 1,400 kg Dimensions (L x W x H): 1700 x 1300 x 1800 mm Technical details subject to confirmation! AKTIV Digital Display 132: - 3-axis position display, screen-based - Practical manual or conventional machine operation already permits some automation processes - 12" monochrome screen - Teach-in mode available - Tool radius correction - Absolute/incremental input - Setting of reference points - Metric/inch data entry The machine comes from a vocational training center and has been, in principle, well maintained. The control system boots up and the axes can be moved. However, the machine is being sold as "defective" since no further functional testing can be performed by us.

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm Pedpfx Asvwgtysb Ijrd milling spindle motor S1 (100% / 2 min) 34 kW max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: excellent (used), For sale: Professional tool holder SK40-12×50-K, compliant with DIN 69871 AD/B. Each holder is fitted with a mounted end mill (visible in the photos). Pjdpfxsxcg H Hj Ab Ierd Mounting type: SK40 Sleeve: Ø12 mm Grip length: 50 mm Standard: DIN 69871 AD/B Condition: used, fully functional, ready for operation Please note that several units are available, all in the same Ø12×50 size.

Condition: new, I sell, milling machine new. Pedpfxsuuiyte Ab Ijrd