Used Mini Milling Machine for sale (87,862)

Condition: good (used), Year of construction: 1990, CNC universal milling machine MAHO Type: MH 500 W Control MAHO 432 Spindle holder : ISO 40 Spindle speed : 20 - 4000 rpm Travels : X 500 mm Y380 mm Z350 mm Table load capacity : 250 kg Fjdpfx Ader Igv Rjdjgk Machine in good condition from tool shop. Machine dimensions : Width 1500 mm Depth 2000 mm Height 1800 mm Weight .2100 Kg . Machine documentation available, machine can be demonstrated under power.

Condition: used, Technical data: Working table dimensions: 280x1280 mm Longitudinal table travel: 600 mm Cross table travel: 260 mm Vertical table travel: 300 mm T-slots in table – number/width/spacing: 5x14x70 mm Distance vertical spindle – column: 200~550 mm Distance vertical spindle – table: 100-480 mm Distance horizontal spindle – table: 0–300 mm Fodpfx Adex Eacmedsgk Vertical head – adjustment: +/-45 degrees Spindle [mm] quill travel L: 120 mm Spindle taper: ISO 40 Mechanical spindle feed: 0.08 – 0.15 – 0.25 mm/rev Max. drilling diameter steel/cast iron: 50 mm/30 mm Vertical spindle speed: 115~1750/8 rpm Horizontal spindle speed: 40~1300/12 rpm Rapid traverse setting for Z axis Digital readout for 3 axes Main motor power vertical/horizontal: 1.5/2.2 kW Overall dimensions: Length: 1650 mm Width: 1400 mm Height: 2350 mm

Year of construction: 2018, condition: used, machine/vehicle number: 7.F1/105-16 38204, 1 refrigerated dryer Fgjdpfex Akhzex Addek

Condition: like new (used), Year of construction: 2020, Console milling machine Reckermann 1300 Kombi The machine is in absolutely mint condition. The customer did not receive the parts for which the machine was intended. Fedpfox A Etfex Addjgk

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Fsdpfx Adex Ada Rodogk Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 15105602, travel distance X-axis: 70 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (min.): 50 rpm, mount diameter: 30 mm, total length: 3,500 mm, total height: 2,200 mm, table width: 410 mm, total width: 2,400 mm, table length: 1,230 mm, feed length W-axis: 495 mm, controller manufacturer: HEIDENHAIN, table load: 250 kg, number of slots in tool magazine: 32, Equipment: documentation/manual, rotational speed infinitely variable, ACCESSORIES: - Incl. dividing attachment (4th axis) by FEHLMANN, model: AT125 CNC Fedpfjwxq Ezex Addsgk - Incl. approx. 126 SK 30 tool holders and documentation DISTANCES & OTHER DETAILS: - Distance from floor to coordinate table: 1010 mm - Distance from coordinate table to spindle nose: 0 – 125 – 620 mm - Horizontal overhang: 370 mm - Max. tool length: 260 mm - Max. tool diameter without empty positions: 63 mm

Condition: good (used), Year of construction: 2003, Vertical milling machine, UNITECH, type: FSS 315-S7, year of manufacture 2003 with 3-axis digital display ACU-RITE Hydraulic tool clamping, synchronous milling device, coolant device. Travel paths: X 1000 mm Y 355 mm Z505 mm Table: 315 mm X 1250 mm. Fedpfx Adev A Trasdsgk Spindle mount: ISO 50 Spindle speeds: 28 - 2240 rpm Machine in good condition, machine documentation available. For further data, see data sheets.

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Fgjdpsxukppofx Addek Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: new, Year of construction: 2025, functionality: fully functional, spindle speed (max.): 60,000 rpm, type of input current: AC, table length: 320 mm, table width: 560 mm, year of last overhaul: 2025, warranty duration: 12 months, working width: 560 mm, working length: 320 mm, number of axes: 3, The compact table version LOW MINI was specially developed for separating panels for small-format series, for small series with large formats, and for cost-conscious manufacturing. PCB materials with remnant web connections can be quickly and economically separated up to a size of 320 mm x 560 mm. The separation process is servo-controlled on all axes, with the milling drive from above. Switching the working area from small (320x280mm) to large (320x560mm) format is the highlight of the machine, thanks to its simple and uncomplicated operation. • Short cycle time due to shuttle operation • X/Y axes with linear motor technology • Panel fixation with pin technology • Flexible handling • PCBs with remnant web connections • Milling spindle adjustment with servo technology • Extraction device • Easy operation • Optimal price-performance ratio Manual panel separation – flexible and cost-effective The concept of manual panel separation offers enormous advantages when it comes to flexibility and cost. Medium production volumes can be separated quickly and with low dust using the LOW MINI. Standard is 2-way loading with linear motor technology; to enlarge the working area, operation with a single shuttle is possible. The maintenance and user-friendliness combined with the excellent price-performance ratio allows for pleasant working conditions and also makes investing in this panel separator economically worthwhile. Axis speed 160mm/s Fedpfx Adsxmfdxodogk Repeat accuracy 0.02 mm Separation accuracy 0.1mm Shank tool 0.8 - 2.4mm

Condition: used, Year of construction: 2017, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,200 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, CONTROLS .. CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 6000 mm .. Y-axis travel: 2200 mm .. Z-axis travel: 1300 mm SPINDLE / HEAD .. - positioning/indexing: 2.5 ° .. drive power: 37 kW .. spindle revolutions (max): 5000 /min .. tool fixture: ISO SK 50 Fgodpfx Adox Azxksdjk .. drive power: 43 kW AXIS DRIVES .. feed velocity (max): 35000 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 14500 mm .. space requirements -front/back-: 7500 mm .. total height: 4905 mm .. total weight approx.: 32000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. European CE standards: yes tool magazine with 60 slots Coolant system via shower ring and IKZ up to 70 bar Coolant type Coolant lubricant / air / air with MMS Electronic handwheel with cable transmission Accessories: Chip conveyor Coolingsystem

Condition: used, Year of construction: 2003, x-travel 350 mm y-travel 240 mm z-travel 340 mm b-axis -15 / +105 ° c-axis 360 ° control SINUMERIK 810 D SIEMENS spindle taper SK 40 spindle turning speed range 20 - 6.300 U/min table-size Ø 400 x 290 mm table load 100 kg feeds -stepless- 5.000 mm/min rapid traverse 5,0 m/min power capacity 6,3 / 10,0 kVA voltage 400 V total power requirement 15,0 kVA weight of the machine ca. 1,6 t dimensions of the machine ca. 1,75 x 1,60 x 2,10 m coolant tank 1,10 x 0,30 x 0,40 m - Serial-No.: 11065356904 - Machine ON: 37,474 h - Spindle ON: 1,428 h - Control: Sinumerik 810 D / Shopmill - Electronic handwheel - machine table pivotable - Manual rotation/pivotation of machine table with DRO display on CNC screen - Swivel range b-axis -15° / +105° Fsdpfx Adsx A H R Sedjgk - Swivel range c-axis 360° - Coolant device - Siemens CCU-Unit changed Dec.2025

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Fedsu Eqixjpfx Addjgk Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1995, Universal milling machine, make AUERBACH, type: 315 FUW, year of manufacture 1995 Fgjdjv Dab Depfx Addsk with 3-axis digital display HEIDENHAIN, hydraulic tool clamp, machine vice tool holder, counter holder for horizontal milling, coolant system, machine documentation in good condition. Travel paths: X 500 mm Y 400 mm Z 330 mm Table: 400 mm X 700 mm Spindle mount: ISO 40 Spindle speeds: 20-3000 rpm Rapid traverse: X / Y / Z. For further data, see data sheet.

Condition: new, Year of construction: 2025, This machine meets expectations where accuracy is key, perfect for school and industrial training workshops. Drilling, milling and turning done taking only a small amount of space. 2 x autofeed- longitudinal and cross. Technical data Swing over bed 320 mm Maximum working length 750 mm Swing after bridge removal 210 mm Spindle bore 38 mm Spindle taper MK5 Tool holder size 16x16 Transverse travel 160 mm Longitudinal travel 100 mm Metric thread 17 Metric thread pitch 0.5–4 mm Inch thread 20 Inch thread pitch 9–40 1/n'' Longitudinal feed 0.135–1.80 mm/turn Cross feed Fodporicx Sofx Addegk 0.025–0.34 mm/turn Tailstock quill extension 70 mm Tailstock quill taper MT3 Number of spindle speeds 6 Spindle speed 75–1900 rpm Motor power 1.1 kW, 230V 50 Hz Drilling and milling machine Spindle bore MK3 Number of spindle speeds 4 Spindle speed 240–2700 rpm Maximum drilling diameter 16 mm Swivel head 360° Motor power 370 W Dimensions 1500×635×1200 Weight 390 kg Standard equipment - stand, - 2 dead centres, - set of gears, - set of soft jaws, - drilling chuck 16mm, - 3-jaw lathe chuck, - tools

Condition: used, Year of construction: 2018, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control 840 D sl op. ( CELOS ) Siemens turning speed range - main spindle 20 - 20.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 86 Nm tool taper HSK-A63 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load (1.500) kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 T-slot - distance 63 mm table height 255 mm rotatable C: 360 ° turning speeds 16 1/min resolution 0,001 ° number of toolpositions 60 pos. tool taper HSK-A63 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 73 kVA weight of the machine ca. 13,7 t dimensions of the machine ca. 7,5 x 6,5 x 3,0 m 5-Axis CNC - Travel Column Milling Machine DMG MORI - DMF 180-7 - Motorspindle SpeedMaster - Swivel-Head (B-Axis) - rotary-table included in working-table - internal coolant system - Spindle, Y-axis and B-axis clamping overhauled in 04/2025 Fgodpfsxr Racox Addek

Year of construction: 2001, condition: good (used), CNC bed type milling machine Fabr.IBERIMEX-MVR Fodpfxsd Eranj Addegk Type: UH-1250 BJ. 2001 Control HEIDENHAIN TNC124 Procedures: X1250mm Y500mm 460 mm Clamping table: 360mmX1800mm Spindle retainer: ISO50 Machine with full enclosure. Machine card see more data. Machine in good condition.

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Only spare parts Please ask what you need. Fgsdpfjdtdahox Addek

Condition: good (used), Year of construction: 1988, CNC milling machine MAHO Type: MH 500 W Year 1988 Heidenhain TNC 232 B control. Fgodpfx Aoich Ehoddok With counter bearing for horizontal milling. Spindle mounting: ISO 40 spindle speed stepless 20 - 4000 rpm feeds : 1-3000 mm / min Travels : X 500 mm Y380 mm Z 350mm Table : 700 mm X 350 mm Weight.ca.2000kg. Machine documentation available Machine is ready for demonstration.

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Fedpjvmglzsfx Addjgk Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available.

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Fodobu Em Ajpfx Addegk Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Installed. Good general condition. Machine can be run under current.

Condition: defective spare-parts repository (used), Year of construction: 1990, spare parts CNC milling machine DECKEL FP5CC/T year 1990 spare parts How. Control DIALOG 11 Switch cabinet Complete Milling spindle vertical and horizontal ISO 40 Fgedefgvu Uepfx Addjk Universal rotary tilting table Tool magazine with changer Chip conveyors, motors, U.S.W. Please ask for request.

Year of construction: 1986, condition: good (used), Universal milling machine Fedpjich Dvofx Addegk Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y and Z 0-250 mm/min Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Machine Docs Available Good condition Ready for demonstration .

Year of construction: 1993, condition: good (used), CNC universal milling machine DMG MORI Type: MH 600 C Fgjdpfx Adsiihxhedsk Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition.

Year of construction: 2006, condition: good (used), Universal tool milling machine KNUHT type: WF 5 year 2006 with 3-axis digital indicator, stepless feeds, hydraulic tool clamping. Fsdpfsichr Sox Addogk Table size : 800 mm X 300 mm max. load 350 Kg. Travels : X/Y/Z 450/400/320 Spindle mounting : ISO 40 spindle speed : 63 - 3150rpm Stepless feeds : 5-1250mm/min rapid traverse .1800mm/min Space requirement : 1,7m X 1,7m X 1,9m Weight.ca.1800Kg. Machine docs available ,machine demonstration ready undercurrent .

Condition: good (used), Year of construction: 1990, CNC Universal Milling Machine MAHO MH600-C Control MAHO 432 with universal clamping table . Spindle holder : ISO 40 Travels : X 600 mm Y 400 mm Z 500 mm Spindle speeds up to 2 000 rpm with work area enclosure Fjdpfx Aeurcybeddsgk Machine documentation available . Machine from tool shop in good clean general condition Ready for demonstration under power .