Used Mori Seiki Mv 40 for sale (209)

Condition: used, Year of construction: 2000, functionality: fully functional, CNC Lathe Mori Seiki ZT 2500 Y Year of manufacture: 10/2000 Control: MORI SEIKI MSX-501 III Simultaneous machining on 2 surfaces with 2 spindles and turrets. Double-sided machining Large number of tools included. Nksdjxz Hnnspfx Ag Neu For further technical details, see images.

Condition: used, Year of construction: 2000, turning diameter 280 mm turning length 960 mm Njdpfxoxz Scqo Ag Nsku control MORI SEIKI MSX -501 III weight of the machine ca. 13,5 t

Condition: good (used), Year of construction: 2006, Year of manufacture: 2006 CNC control: Mitsubishi MSX-850 X-axis travel (mm): 260 Z-axis travel (mm): 795 Y-axis travel (mm): 100 Swing diameter over bed (mm): ø 920 Swing diameter over cross slide (mm): 742 Upper turret Number of tool stations: 12 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/15 Spindle bore (mm): 91 Chuck type: Hollow Chuck (10") Manufacturer: KITAGAWA Tailstock Tailstock travel (mm): 734 Taper: MT3 Equipment Chip conveyor Signal light High-pressure pump Foot switch for chuck or collet system Interface for bar feeder Basic machine: Dimensions/Weight Length (mm): 2,620 Width (mm): 1,898 Height (mm): 2,200 Nodpfjv Egqzex Ag Noku Weight (kg): 6,140

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2006 Mori Seiki NL2000Y/500 CNC Lathe with Y-Axis and live tooling. Plastics-only medical device use. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2006 Location: Ireland Availability: Immediate Machine Overview Available now from Used Machine Tools Ireland, this 2006 Mori Seiki NL2000Y/500 CNC Lathe is presented in excellent working condition with a very clean operational history. The machine was used exclusively for machining plastics by a medical device manufacturer, resulting in: Minimal spindle and guideway wear Clean internal condition Long remaining service life Unlike many plastics-only machines, this example is fully equipped with coolant, making it immediately suitable for both plastic and metal machining applications. Nkedpsyhqmpefx Ag Nou The NL2000Y/500 is widely regarded as one of the most capable and reliable Y-axis CNC lathes in its class, featuring Mori Seiki’s renowned BMT turret technology for rigidity, accuracy, and thermal stability. Key Features & Highlights Y-Axis CNC Lathe – complex milling and turning in one setup Live Tooling (6,000 RPM) – drilling, tapping, and milling capability BMT (Built-in Motor Turret) – exceptional rigidity and precision Plastics-Only Medical Use – exceptionally low wear Full Coolant System Installed Coolant Tank Capacity: 235 Litres Tailstock & Workpiece Unloader – production-ready configuration MSX-850 III Control – powerful and reliable Mori Seiki control Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis Travel: 260 mm Z-Axis Travel: 590 mm Y-Axis Travel: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Number of Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Max Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Tailstock Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Coolant System Coolant Equipment: Yes Coolant Tank Capacity: 235 Litres Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial driven toolholders ✔ Selection of radial driven toolholders ✔ Selection of static toolholders Additional Notes Used exclusively for plastic machining in a medical device environment Fully equipped with coolant equipment, suitable for plastics or metals Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Precision plastic machining CNC turning & milling with Y-axis Aerospace, electronics & high-precision components

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 510 mm, turning diameter: 366 mm, spindle bore: 73 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 5,705 mm, total width: 1,922 mm, feed length X-axis: 260 mm, feed length Y-axis: 100 mm, feed length Z-axis: 590 mm, quill travel distance: 564 mm, quill diameter: 80 mm, swing diameter over cross slide: 755 mm, turning diameter over bed slide: 923 mm, type of input current: three-phase, overall weight: 5,700 kg, swing diameter over bed slide: 923 mm, bar passage: 65 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition. Plastics-only medical device use. Y-Axis, live tooling, tailstock, workpiece unloader. Available now in Ireland. Machine Type: CNC Turning Centre with Y-Axis & Live Tooling Manufacturer: Mori Seiki (DMG MORI) Model: NL2000Y/500 Year: 2009 Location: Ireland Availability: Immediate Machine Overview Nkedpfx Ageyhqkzo Nsu We are pleased to offer this 2009 Mori Seiki NL2000Y/500 CNC Lathe in very good condition, available exclusively through Used Machine Tools Ireland. This machine was used only for dry machining of plastics by a medical device manufacturer, meaning: No heavy metal cutting No coolant contamination Exceptionally low mechanical wear The Mori Seiki NL Series is globally recognised as a benchmark for high-precision CNC turning, and the NL2000Y/500 is especially sought after due to its Y-axis capability, live tooling, and BMT (Built-in Motor Turret) design. Key Features & Benefits Y-Axis CNC Lathe – complex milling and turning in one setup BMT Turret Technology – superior rigidity, accuracy, and thermal stability Live Tooling up to 6,000 RPM – ideal for milling, drilling, and tapping Medical / Plastics-Only Use – extremely clean operating history Tailstock & Workpiece Unloader – ideal for automated production MSX-850 III Control – powerful, reliable Mori Seiki control system Technical Specifications – Mori Seiki NL2000Y/500 Capacity Distance Between Centres: 500 mm Chuck : Collet Chuck Max Turning Diameter: 366 mm Standard Turning Diameter: 275 mm Max Turning Length: 510 mm Bar Capacity: 65 mm Swing Over Bed: 923.8 mm Swing Over Cross Slide: 755 mm Axis Travel X-Axis: 260 mm Z-Axis: 590 mm Y-Axis: ±50 mm (100 mm total) Spindle Max Spindle Speed: 5,000 RPM Spindle Nose: JIS A2-6 Through-Spindle Bore: 73 mm Spindle Motor: 15 / 15 / 11 kW Turret & Tooling Turret Type: BMT (Built-in Motor Turret) Tool Stations: 16 Max Live Tool Speed: 6,000 RPM Live Tool Torque: 29 Nm Turret Index Time: 0.2 seconds Feed Rates Rapid Traverse (X / Z): 30,000 mm/min Rapid Traverse (Y): 10,000 mm/min Tailstock Tailstock Travel: 564 mm Spindle Diameter: 80 mm Taper: MT4 Live Centre Automation Workpiece Unloader: Yes Max Workpiece Diameter: 80 mm Max Workpiece Length: 200 mm Max Workpiece Weight: 3 kg Electrical & Dimensions Power Requirement: 31.5 kVA Machine Dimensions (L × W × H): 2705 × 1922 × 2120 mm Machine Weight: 5,700 kg Included with Machine ✔ Selection of axial & radial driven toolholders ✔ Selection of static toolholders ✔ Extraction unit for plastic machining Additional Notes Used exclusively for dry plastic machining No coolant system fitted, however the machine is prepared for coolant installation Specifications provided in good faith but not guaranteed Ideal Applications Medical device manufacturing Plastic & polymer machining Precision CNC turning & milling Aerospace, electronics & high-tolerance components This Mori Seiki NL2000Y/500 CNC Lathe represents a rare opportunity to acquire a premium Japanese turning centre with an exceptionally clean usage history.

Condition: used, TURNING CENTER "MORI SEIKI" MOD. ZL 200SMC With twin powered turret and sub-spindle CNC MSC-501 Turning length: 452 mm Max. turning diameter: 388 mm Max. diameter over bed: 510 mm Distance between centers: 751 mm Spindle mount: A2-6 Spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of tools: 12 Nsdpfxoxwxwte Ag Noku

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE Nedpfsuq Iwpsx Ag Nsku SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 705 mm, turning diameter: 356 mm, spindle bore: 81 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 795 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,220 mm, total length: 3,100 mm, total width: 1,920 mm, overall weight: 6,200 kg, bar passage: 80 mm, tailstock quill stroke: 734 mm, Equipment: documentation/manual, Mori Seiki NL2500Y/700 CNC Lathe – with Y-Axis – Used & Fully Refurbished, Immediately Ready for Operation The machine is in excellent condition, completely overhauled by qualified technicians and fully functional. Ideal for precision machining with Y-axis and live tooling. Main Specifications: - Year of manufacture: 2005 - CNC control: Mori Seiki MSX-850 - Max. swing diameter: 755 mm - Max. turning diameter: 356 mm - Max. turning length: 705 mm - Bar capacity: 80 mm - Spindle bore: 81 mm Spindle and Turret: - Kitagawa BB210 3-jaw chuck (clamping range 41–254 mm) - Spindle speed: up to 4,000 rpm - 12-position turret - Powered tools up to 6,000 rpm - Included: 4 driven toolholders and 7 static toolholders Axes: - X-axis travel: 260 mm - Y-axis travel: ±50 mm - Z-axis travel: 795 mm - Rapid traverse X/Z: 30 m/min Nkodpfx Aovw Ackjg Neu Additional Features: - Tailstock (734 mm travel, MT3 fitting) - Belt-type chip conveyor - Tool presetting system - Parts catcher ("manina") Dimensions and Weight: - Footprint: 3,100 x 1,920 x H 2,220 mm - Weight: 6,200 kg Machine supplied with: - 2x radial driven toolholders - 1x axial driven toolholder - 8x static toolholders (boring bar and standard toolholders) The machine is available for testing and demonstrations at our showroom or via video call and is immediately ready for use.

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories Nkodpfxsx I A Awe Ag Nsu MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2012, operating hours: 45,656 h, functionality: fully functional, machine/vehicle number: AX4E -NAOS 12-160, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. spindle speed: 12,000 rpm Spindle drive power: 15 / 11 kW Max. torque: 102 Nm Tool holder: SK 40 Distance spindle center to table: 80 - 800 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 x 500 mm Max. workpiece weight: 500 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,100 mm Pallet change time: 9.5 s Indexing time: 1.49 s Number of tool stations: 60 Max. tool diameter: 70 mm Max. tool diameter with adjacent stations free: 170 mm Max. tool length: 550 mm Tool-to-tool change time: 0.9 s Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Creep feed range: 0 - 5,000 mm/min MACHINE DETAILS Total power requirement: 34 kVA Dimensions & Weight Footprint: approx. 5500 x 3000 x 2800 mm Machine weight: approx. 11.1 t Operating hours: 45,656 h EQUIPMENT Chip conveyor Coolant system Internal coolant supply IF Knoll Tool changer B-axis Nkjdpex I Amijfx Ag Neu Pallet changer Oil mist separator Magazine tool breakage control Thread milling Note: Proof of spindle replacement in 2019 is attached.

Year of construction: 2005, condition: ready for operation (used), Main Drive Spindle speed range 6000 Number of axis 6 Nkjdpfxex D R Aue Ag Neu Movement X-Axis Movement 260 mm Z-Axis Movement 590 mm This 6-axis MORI SEIKI NL2000SY/500 was manufactured in 2005, featuring X-axis travel of 260 mm, Z-axis travel of 590 mm, spindle power of 5.5 kW, and a spindle speed of 6,000 rpm. It includes a 12-position tool turret. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI NL2000SY/500 machine we have for tact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2002, operating hours: 400 h, General Data Machine weight 15000 kg Measurements height 3950 mm Dimensions Machine Length 9500 mm Nsdpfx Asx D D I Dsg Nsku Table Table load 1000 kg Control Unit Brand FANUC Model 16iMA Main Drive Spindle Speed 10000 RPM Number of axis 3 Spindle motor power 30 kW Movement Z-Axis Movement 1000 mm Y-Axis Movement 1200 mm X-Axis Movement 1080 mm This 5-axis MORI SEIKI SH8000/5AX was manufactured in 2002. Fully overhauled in 2016, it features a Fanuc 16iMA control, a spindle speed of 10,000 rpm, and a tool magazine with a capacity of 150 tools. The machine has a pallet size of 630 × 630 mm and a loading capacity of 1000 kg. If you are looking to get high quality milling capabilities consider the MORI SEIKI SH8000/5AX machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Nksdpfx Ajxg Nd Aog Nou Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Fanuc 6T Equipped with: See photos

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of turrets : 1 - Number of axes : 6 MAIN SPINDLE - Spindle nose : A2-8 - Max. bar diameter : 80 [mm] - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260 x 795 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6.000 [rpm] - Live tools power : 5,5 [kW] COUNTER-SPINDLE - Spindle nose : A2-5 - Max. bar diameter : 51 [mm] - Max. turning diameter : 190 [mm] - Spindle power : 11 [kW] - Spindle speeds : 6.000 [rpm] - C axis indexing precision : 0,001 [°] Nksdpfx Agsx Tvkro Nsu - Travel : 760 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 42 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 4.414 x 2.370 [mm] - Machine height : 2.115 [mm] - Machine weight : 6.200 [kg] MACHINE HOURS - Number of hours under power : 15525 [h] - Number of working hours : 12865 [h] EQUIPMENT - CNC : Mitsubishi MSX-850II - Interactive programming : MAPPS III - Interface : USB / PCMCIA / RJ45 - Tool probe : Renishaw - 3 colors status lamp - Tailstock function - Coolant tank - Chips conveyor : Droite - Spindle cooling unit - Parts catcher - Bar loader : LNS Quick LoadSERVO 80 - Parts conveying strip - Number of turning tool holders : 2 - Number of fixed tool holders : 10 - Chuck 3 jaws

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 1 - Number of turrets : 1 MAIN SPINDLE - Spindle nose : A2-8 Nksdpfxex Tvklj Ag Nju - Spindle power : 18,5 [kW] - Spindle speeds : 4.000 [rpm] - Max. bar diameter : 80 [mm] - Max. diameter on bench : 923 [mm] - Max. turning diameter : 460 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 260/1345 [mm] - Y stroke : +/- 50 [mm] - Tool type : BMT - Live tools speed : 10000 [rpm] TAILSTOCK - Tailstock type : Numérique - Type of cone : CM5 - Distance between centers : 1255 [mm] - Tailstock stroke : 734 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.110 x 1.922 [mm] - Machine height : 2.120 [mm] - Machine weight : 6.100 [kg] MACHINE HOURS - Number of hours under power : 26654 [h] - Number of working hours : 15488 [h] EQUIPMENT - CNC : CELOS - Interactive programming : MAPPS 4 - Interface : USB, PCMCIA, RJ45, RS232 - Tool probe : Renishaw - Coolant tank * with high-pressure pump : 15 [bars] - Chips conveyor - Tool probe - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD SERVO 80 S2 - Number of fixed tool holders : 10 - Number of turning tool holders : 2 - Electric transformer - Collet chuck

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 Nsdpfx Agex Tvi Is Njku - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 800/530/510 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 1125/600 [mm] - Maximum weight upon table : 800 [kg] - Distance table / spindle nose (min./max.) : 150/660 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 27 [kW] WEIGHT & DIMENSIONS - Machine floor space : 243/2160 [mm] - Machine height : 2670 [mm] - Machine weight : 6415 [kg] MACHINE HOURS - Number of hours under power : 17322 [h] EQUIPMENT - CNC : Mori MSC-504 - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : MAPPS - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : GAUCHE - Tool probe - Workpiece probe

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Nkedpfx Aod Hkuceg Nou Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Nkjdpsx Hp Hgefx Ag Nju Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: good (used), turning diameter over cross slide: 510 mm, turning length: 500 mm, turning diameter: 320 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-200/500 CNC Lathe Year: around 1999 Machine Type: CNC Turning Center (2-Axis) Control System: Mori Seiki SMC-500 Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Nkjdpox Hpx Nsfx Ag Nsu Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 65 mm Maximum Bar Capacity: approx. 51 mm Spindle Speed: up to 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 10 Stations Tool Size: 25 mm Machine Weight: approx. 4,500 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: good (used), turning diameter over cross slide: 530 mm, turning length: 500 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 520 mm, Mori Seiki CL-253 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Control System: Mori Seiki MSG-803 Chip Conveyor: Not equipped Machining Capacity Maximum Turning Diameter: approx. 350 mm Maximum Turning Length: approx. 500 mm Nkedpfx Aox Hp Rfjg Nou Swing Over Bed: approx. 530 mm Axis Travels X-Axis Travel: approx. 220 mm Z-Axis Travel: approx. 520 mm Spindle Spindle Nose: A2-6 Spindle Bore: approx. 65 mm Maximum Bar Capacity: approx. 52 mm Spindle Speed: up to 3,500 rpm Spindle Motor Power: approx. 15 kW Turret Tool Turret: 10-Station Turret Tool Size: 25 × 25 mm Machine Data Machine Weight: approx. 4,500 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,650 × 1,750 mm

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Nedpfx Aex Hp Ikog Neku Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Njdpfx Aeycu Rueg Noku Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Tailstock Tool setting probe Dust extraction

Condition: ready for operation (used), Mori Seiki turret head with 10 positions for Mori Seiki CL-150.200. Shank height for square tools: 20 mm, maximum drill shank diameter: 32 mm, turret indexing time: 0.7 sec, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! Nedpfx Agsx Dw Rfo Neku

Condition: used, Year of construction: 2001, Turning length 470 mm Max. torning dia. 390 mm Spindle speeds 3500 rpm Movements X/Z - 235/520 mm No of stations in turret 12 pcs. Nkodpfx Ajxdfi Njg Neu Control: MSG 500 Accessories: Various tool holders

Condition: used, Year of construction: 2008, Swing over bed 923,8 mm Swing over cross slide 755 mm Max. turning diameter 356 mm Nsdpou Sn Hzefx Ag Nsku Max. turning length 510 mm X/Z-axis movement 260/590 mm Turret w/12 stations Spindle speeds 5000 rpm Spindle bore 73 mm Control: MSX-850 III Equipped with: Collet chuck w/collets Chip conveyor 3 standard tool holders No Gantry loader incl.