Used Multiblade Saw Log for sale (7,267)

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation Bwodpsy E Uk Isfx Afgsw • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), saw blade diameter 400 mm Bodpoy Aytvofx Afgeww cutting diameter 130 mm stroke 150 mm mitter cutting - all-position +90°/-90° ° cutting speed 10/20 m/min voltage 400 V feed speeds infinitely variable 0 - 1000 mm/min total power requirement 3,4 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1,10 x 0,9 x 1,50 m

Condition: used, machine/vehicle number: 008583, Max. panel width: 2200 mm Bodpfx Afsy Stwgjgeww Max. panel length: 5600 mm Main saw blade projection: 135 mm No of Grippers: 11

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Max. panel length: 5700 mm Max forward speed: 30 mt/min Bwsdpfxjyz Slbo Afgjw Number of shafts: 1 Motor Power: 90 KW

Condition: used, Year of construction: 1995, cutting diameter 280 mm saw band length 4200 mm cutting width 280 x 280 mm dimensions of saw-band 4200 x 34 x 1,1 mm cutting speed 18 - 115 m/min multiple feeding 0 - 6000 mm power capacity 3,0 kW voltage 400 V total power requirement 5,0 kW weight of the machine ca. 2,3 t Bwodjp Rai Ejpfx Afgjw dimensions of the machine ca. 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system Bodpfor Ik Sqjx Afgoww • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Saw length 4318 mm Bodeiwlmcepfx Afgsww

Condition: new, Heavy-duty work table made of robust, ribbed cast iron Sturdy base made of welded steel Precise panel gliding table made of anodized aluminum Carbide guide rails – for lasting precision and minimal maintenance of the gliding table Swiveling cast iron saw head with double segment guide Solid parallel fence with round bar guide Integrated miter gauge on the gliding table Scoring saw with its own powerful drive motor (optional) Equipped with a high-quality rip fence and telescoping stop, integrated roller, angled scale, and practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Including saw blade pendulum guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm) 140 with 400 mm blade Max. cutting height at 45° (mm) 100 with 400 mm blade Saw blade swivel angle (degrees) 90/46 degrees Raising and swiveling of the saw blade unit: manual Bwsdpfx Afjit I Sbsgow Saw blade speed (rpm) 3500/5000 Main motor power (kW) 50 Hz 7.5 Scoring saw motor power (kW) 50 Hz 1.3 Scoring saw speed (rpm) 9200 Panel cutting size (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Dust extraction port diameter (mm) 120, 60

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: Bodpfxscrnm No Afgoww saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: used, Technical details: Bjdpfeu Nigwjx Afgoww saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Bwjdpfeu Niuzjx Afgow Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Bwedou Niu Ujpfx Afgjw Vertical band saw with saw band welding device. The table is tiltable. *

Condition: new, Band saw blade Make Röntgen Type bi-alfa cobalt Dimensions :4860 x 34 x 1.1 mm Bwjdpferwl R Nox Afgsw 3/4 Combi 10 unused, out of magazine

Condition: as good as new (ex-display), Demonstration Machine The professional block bandsaw for logs up to 100 cm in diameter from Forestor Pilous is the result of decades of sawmill tradition, specifically designed for professional sawyers. Equipped with a telescopic lever log turner, log lifter, and a powered log lifter for horizontal log feed. Features 5 hydraulic angle stops and 2 log clamping devices. Bedpfxovrvqwe Afgoww The saw is standard for logs up to 7.6 m long and can be extended on request. Automatic feed with stepless speed adjustment. Electric height adjustment controlled from the operator panel. 8.4-inch touchscreen LCD for height settings, with two speeds for height adjustment. Includes stationary operator panel. Automatic rapid return. CE certified. Technical Data: Max. log diameter: 1000 mm Max. board width (plank width): 850 mm Max. saw blade rise: 875 mm Min. cutting height: 30 mm Max. frame clearance: 450 mm Cutting length of base section: 7.6 m Extension section length: 3 m Saw blade drive: 15 kW Portal travel motor: 1.5 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5350 x 35 ÷ 40 x 0.9 ÷ 1.1 mm Weight of base version: 2580 kg Extras not included in the price. (Image for reference only)

Condition: as good as new (ex-display), Demonstration machine Extra strong, robust, durable bandsaw mill for logs with a maximum diameter of up to 1000 mm. Includes soft starter, can be extended with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. Equipped with telescopic log turner, log lifter, log lifter with drive for horizontal log feed. Hydraulic angle stops. Includes 2 log clamping devices. Hydraulic saw blade tensioning. Electrically adjustable saw blade guide. CE certified. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 365 mm Cutting length of base section: 7.5 m Extension section length: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Lift motor: 0.55 kW Hydraulic unit motor: 5.5 kW Saw blade dimensions: 5960 x 60 x 0.9-1.3 mm Weight of base version: 2800 kg This machine includes the following accessories: CTR-1000H60-Ver3 – 3m extension section (extends the cutting length by 3m). Bedpfx Afsvrvq Dogjww CTR-VOR-1300H – Pre-cutting device (for maximum saw blade service life). CTR-AMP – Ammeter (shows the current consumption). CTR950H-KSD – Chain log turner (for hydraulically turning logs). CTR950H-DS – Double-arm log loader (for hydraulic loading). CTR950H-MR – Material chute (allows the end of the pushed material to slide onto subsequent belt or roller conveyors). CTR1000H40-ZUB – Outfeed conveyor for sawn material (allows for very easy material removal or material can be pushed onto subsequent belt or roller conveyors).

Condition: excellent (used), Year of construction: 2014, I sell the 2-spindle horizontal multirip saw of polish production Walter OP-500. Year 2014. Suitable for cutting round wooden logs with 2 Spindles. Cutting width 120 - 350mm. Motors 23,8 + 23,8 KW. Total power 54,2 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 20m/min. Blades and adjusting rings included. Bsdowini Ejpfx Afgjww The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), Pendulum Saw Bottene Motor power: 3.7 kW, 380 V, 50 Hz Maximum saw blade diameter: 500 mm Cutting height: approx. 120 mm Maximum throat: 500 mm With roller table and longitudinal fence on the left, 3000 mm With roller table on the right, 1000 mm Extraction diameter: 120 mm Bwjdpfxjydnitj Afgew Approx. dimensions (L x W x H): 4200 x 1150 x 1650 mm Weight: approx. 200 kg Saw can be swiveled to the right Saw and roller table mobile Including saw blade Note for used machines: • Technical details and intermediate sale subject to change. • Prices are ex location and refer to self-collection – free loading at site! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 1982, Technical details: Bwedpfoyzpknox Afgow dimensions of saw-band: 3920 - 4050 mm throat: 500 mm workpiece height: 400 mm table - inclinable: 15 - 30 Grad Cutting height: 400 mm band speed: 15 - 940 m/min Table dimensions: 800 x 820 mm mm machine weight approx.: 1000 kg dimension machine approx.LxWxH: 1,3 x 1,3 x 2,2 m

Condition: used, Year of construction: 1995, Technical details: cutting diameter: 300 mm saw band length: 3200 mm saw band width: 25 mm dimensions of saw-band: 3660 x 25 x 0,9 mm electrical connection: 400/50 V / Hz. total power requirement: 1,1 kW work height max.: 650 mm machine weight approx.: 960 kg cutting speed: 15 - 95 m/min dimension machine approx.LxWxH: 2,2 x 2,0 x 1,3 m Bwsdpfxozp Iu Sj Afgsw The Klaeger & Müller HBA 300 G CNC is a robust, hydraulically operated CNC horizontal band saw designed for precise and economical cutting of solid materials, tubes, and profiles made of steel, stainless steel, aluminum, and non-ferrous metals. Thanks to its CNC control system, it enables the automatic processing of production batches with high repeatability and productivity. The machine is equipped with a hydraulic material feed, automatic saw feed, and infinitely variable blade speed adjustment, allowing optimal machining of a wide variety of materials. Its rigid machine construction ensures smooth, low-vibration operation, excellent cutting quality, and extended saw blade life. In addition, the band saw is fitted with a coolant system that improves blade life and ensures clean, accurate cutting surfaces. The Klaeger & Müller HBA 300 G CNC is particularly suitable for industrial applications in metal fabrication shops, steel construction, toolmaking, mechanical engineering, and serial production. *

Condition: good (used), Technical data: Motor power S6: 1150 W Motor power S1: 1100 W Voltage: 400 V Dimensions: Swivel range: 0° - 45° Table size: 500 × 400 mm Overhang: 380 mm Table height: 990 mm Exhaust connection: 100 mm Cutting performance: Max. cutting height at 90°: 220 mm Cutting width at the rip fence: 240 mm Band saws: Bwedpfx Afez I R Uvegsw Saw blade: 2950 mm Wheel diameter: 400 mm

Condition: new, Year of construction: 2026, machine/vehicle number: 3208, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, total length: 6,700 mm, total width: 4,670 mm, total height: 1,480 mm, overall weight: 815 kg, Equipment: CE marking, documentation/manual, saw blade guard, Piła formatowa LAZZURI FX 3200 przeznaczona jest do cięcia drewna oraz materiałów drewnopochodnych, takich jak płyty wiórowe, MDF i sklejka, przy zastosowaniu odpowiedniej tarczy. Maszyna sprawdzi się w warsztatach stolarskich, zakładach meblowych oraz przy produkcji elementów na wymiar. Stół formatowy o długości 3200 mm umożliwia obróbkę materiałów wielkoformatowych, a pochylany agregat pozwala na wykonywanie cięć prostych oraz pod kątem. Pilarka wyposażona jest w silnik główny o mocy 5,5 kW oraz podcinak napędzany osobnym silnikiem o mocy 0,75 kW. Trzy prędkości obrotowe tarczy głównej pozwalają dopasować pracę do obrabianego materiału i zastosowanego narzędzia. DANE TECHNICZNE: Bjdpfxs Af If Tj Afgoww – producent: LAZZURI, – model: FX 3200, – typ maszyny: piła formatowa z podcinakiem, – moc silnika głównego: 5,5 kW, – moc silnika podcinaka: 0,75 kW, – maksymalna średnica tarczy głównej: 400 mm, – maksymalna średnica tarczy podcinaka: 120 mm, – prędkość obrotowa tarczy głównej: 3000 / 4000 / 5000 obr./min, – prędkość obrotowa tarczy podcinaka: 8000 obr./min, – maksymalna długość cięcia: 3200 mm, – maksymalna szerokość cięcia: 1250 mm, – maksymalna wysokość cięcia przy 90°: 125 mm, – maksymalna wysokość cięcia przy 45°: 85 mm, – zakres pochylenia agregatu: od 90° do 45°, – regulacja wysokości cięcia: ręczna, – regulacja kąta cięcia: ręczna, – średnica króćca odciągowego: 100 mm, – masa maszyny: 815 kg. STÓŁ I PROWADNICE: – aluminiowy stół formatowy o długości 3200 mm, – szerokość stołu formatowego: 418 mm, – stół prowadzony na prętach za pomocą systemu rolek, – rozsuwana przykładnica poprzeczna o maksymalnej długości 3200 mm, – dwa przesuwne ograniczniki na przykładnicy poprzecznej, – szkła powiększające ułatwiające odczyt skali przy ogranicznikach, – przykładnica równoległa z aluminiowym liniałem o długości 700 mm, – skala przykładnicy równoległej do 1250 mm, – blokowanie przykładnicy równoległej za pomocą szybkozacisku. WYPOSAŻENIE I FUNKCJE: – podcinak z osobnym silnikiem, – podwójnie łożyskowany wał piły, – trzy prędkości obrotowe tarczy głównej, – zmiana prędkości za pomocą pokrętła, – ręczna regulacja wysokości i kąta cięcia, – wskaźnik zegarowy przy regulacji, – elektroniczny licznik do ustawiania szerokości cięcia. WYMIARY WYMAGANE DO USTAWIENIA MASZYNY: – długość: 6700 mm, – szerokość: 4670 mm, – wysokość: 1480 mm. ZALETY MASZYNY: – długość cięcia 3200 mm, – szerokość cięcia 1250 mm, – możliwość cięcia pod kątem do 45°, – maksymalna wysokość cięcia 125 mm przy tarczy 400 mm, – podcinak z niezależnym silnikiem, – trzy prędkości obrotowe tarczy głównej, – możliwość obróbki dużych płyt i elementów meblowych.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Bodpfeuph Uxex Afgsww Total weight 100 kg

Condition: used, Year of construction: 2002, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: yes Saw blade swivel range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Bsdpfsyq R Acjx Afgoww Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut scale display: scale Scoring unit adjustment: electric Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2300 mm Weight: 1200 kg

Year of construction: 2022, condition: new, Motor power: 1.1 kW / 230 V Cutting area: 100 mm x 145 mm Feed: continuously adjustable Saw blade speed: 22 / 31 / 55 m/min Bodpfogulr Aox Afgsww Saw blade dimensions: 1638 x 13 x 0.65 mm Cutting angle: -45° to 60° Dimensions: 1085 mm x 498 mm x 978 mm Weight: 78 kg

Condition: used, Year of construction: 2008, machine/vehicle number: .080356001, with miter cut, roller feed, and pneumatic clamping. Bodpj Af Nk Nefx Afgjww