Used Northern Climate Hall Heating for sale (17,399)

Condition: excellent (used), For sale: a climate chamber in excellent technical and visual condition. If you have any questions, please feel free to contact me. Technical specifications: Chamber capacity: 749 liters Operating temperature range: From 0°C to +70°C (without humidity control) From +5°C to +70°C (with humidity control) Humidity control range: from 10% to 90% RH (relative humidity) Csdpfx Aoz Tc Hislfehd Cooling/heating: Peltier technology (very energy-efficient, with low vibration) Internal dimensions (W × H × D): 1040 × 1200 × 600 mm External dimensions (W × H × D): 1224 × 1720 × 755 mm Power supply: 230 V, 50/60 Hz Maximum power consumption: 1050 W

Condition: used, RS Simulators Type: KS 300 / 75 Water-cooled climate test chamber 300 liters Internal dimensions: Width 670 mm, Depth 670 mm, Height 670 mm Chedpfozd R Auex Alfod Temperature range from -75 °C to +180 °C Time deviation: +- 0.2 K to +- 0.8 K Average heating rate: approx. 2.1 K/min Average cooling rate: approx. 1.2 K/min Humidity range from 10 % to 98 % relative humidity Operating climate range Temperature: 10 °C to 95 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 1000 mm, Height 1800 mm, Depth 1400 mm Voltage: 3x400V/N/PE, Current: 40A Refrigerant: R404a / R23 Weight: 630 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Type: CS-70/350 Water-cooled Test chamber volume: 350 liters Test chamber dimensions: Height 750 mm, Width 650 mm, Depth 720 mm External dimensions: Height 1800 mm, Width 850 mm, Depth 1640 mm Temperature operating range: Temperature range: -70°C / +180°C Cooling rate: 3.0 K/min Heating rate: 5.0 K/min Climate operating range: Temperature range: +10°C to +90°C Humidity range: +10% to 98% RH Dew point range: +5°C to 89.5°C Temperature deviation: ±0.1 - ±0.3 K over time Humidity deviation: ±1 - ±2% RH over time up to 90% RH Max. ±1 - 3% RH over time above 90% RH Electrical connection: 400V +6-10%, 3/N, 50Hz Connected load: 13 kW Rated current: 25.5 A Refrigerant: R404A / R23 Weight: 650 kg Chedpfx Aleziyw Eefed For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Chjdpfxsz Snbws Alfod Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: used, mileage: 1,17,700 km, power: 100 kW (135.96 HP), color: blue, gearing type: automatic, number of seats: 8, Equipment: ABS, air conditioning, central locking, power assisted steering, - Tel: , Mr. Kiel will be happy to assist you. Chsdpfx Als Ahvaxsfod To ensure you receive the best possible advice, we kindly request that you schedule an appointment. C70 Pedestrian protection, CF7 Comfort suspension, CL1 Steering wheel adjustable for inclination and height, CL3 Leather steering wheel, CL4 Multifunction steering wheel with trip computer, CU4 Aerodynamics package, E07 Hill-start assist, E1D DIGITAL RADIO (DAB), E2R Radio generation 2, E34 Buffer battery for starting, E57 Electrical system for trailer socket, EA4 Audio 40, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, EL8 2-way front speakers, EW6 Pre-installation for Remote Services Plus, EY2 Live traffic information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, EZ5 Parking package, EZ8 PARKTRONIC, F61 Interior mirror, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FKB VAN, FR1 Rear-view camera not foldable, FR8 Reversing camera, G43 9G-TRONIC, H00 Warm air duct to passenger compartment, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IN3 Wheelbase 3430 mm, long overhang, J55 Seat belt warning system for front passenger seat, JA1 Warning light for windshield washer fluid level, JA7 Blind Spot Assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel-matrix display, JP4 Lane package, JW5 Lane Keeping Assist, JW8 ATTENTION ASSIST, JX2 Maintenance interval 40,000 km, KB6 Main tank 57 liters, L LEFT-HAND DRIVE, L16 Fog lamps halogen, LA2 Driving light assistant, LD9 Interior light(s) in the rear, LE1 Adaptive brake light, LX5 Europe, M60 Generator 14 V / 250 A, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MO6 Emission class Euro 6d M/N1 GR. II, MS1 SPEEDTRONIC, MU2 OM 654 DE 20 LA 100 kW (136 hp) 3800/min, MX0 BlueEFFICIENCY package, RY2 Tire pressure monitoring system on front and rear axle, wireless, S00 Airbag control unit generation AB12, S04 Front passenger seat adjustable, SA6 Airbag front passenger, SB1 Comfort driver's seat, SE5 Lumbar support driver's seat, SH1 Thorax-pelvis sidebag driver, SH2 Thorax-pelvis sidebag front passenger, SH9 Window bags for driver and front passenger, T14 Active door lock for sliding door, T70 Child lock on doors in the passenger compartment, T74 Grab handle for entry, T75 Grab handles for entry driver and front passenger, U63 Seating passenger compartment 3-seater bench 2nd row, U71 3-seater bench 1st row with folding outer seat, UR3 Rear seat with quick-release mechanism 2 seat rows, V23 Interior trim, high-quality design, V36 Roof lining, V41 Plastic floor TPO in passenger compartment, VF4 Fabric Caluma black, VH1 Grab handle in the rear, VV9 Mounting points in the roof frame, W16 Window front left, fixed in side wall/sliding door, W17 Window front right, fixed in side wall/sliding door, W29 Window fixed rear, W54 Rear doors, double-leaf, opening to side wall, W78 Window in tailgate with wiper and washer system We would be happy to provide you with an offer for the trade-in of your used vehicle. If you would like to lease or finance your vehicle, we will be happy to provide you with an individual offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewing only by prior appointment! All information is without guarantee, subject to errors and

Condition: used, Feutron Type: 3702/06 Water-cooled climate testing chamber Technical data: Test chamber nominal volume: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Door: double-leaf, clear opening width: 2000 mm, height: 1000 mm Viewing window: heated, 2 pieces, width: 500 mm, height: 600 mm Feedthrough opening: 1 piece, left side wall, diameter: 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, over time: ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling: up to 2.0 K/min on average Heating: up to 2.0 K/min on average Humidity range: 10...95 % r.h. Humidity difference, over time: ≤ ± 3.0 % r.h. Dew point range, intermittently: -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Chodpjzd Sdmjfx Alfed Refrigerant: R507 (Μ-Κ1) Climate and drying refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/, 50Hz Power plug: CEE 5-pole, 32 A, with 5.0 m cable Max. simultaneous power consumption: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WK-600/70 (I)-(II) 2 G EEx /22605147   Weiss Climate Chamber, Water-Cooled   (Test chamber, explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER   Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Test chamber volume: approx. 600 liters   Cold / Heat operation -70 to 180°C   Climate operation 10 – 95°C Humidity 10...98 % RH Temperature change per unit of time Cooling approx. 2.5 K/min Heating approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse, customer-supplied: 32 A slow-blow Permissible test item weight Total load of the grid supports 80 kg   Test chamber floor 80 kg, insert grid 40 kg   Weight: 800 kg   Refrigerant: R 404A/R 23   (Evaporator of the air conditioning system has been replaced)   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Chsdpfx Aezh D Ryslfjd Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, mileage: 69,990 km, power: 120 kW (163.15 HP), color: white, gearing type: mechanical, Equipment: ABS, air conditioning, central locking, power assisted steering, - Tel: , Mr. Kiel will be happy to assist you. To ensure you receive the best possible advice, we kindly ask you to schedule an appointment. BA3 Active Brake Assist, BB7 CO2-optimized brake system, C6L Multifunction steering wheel, CF0 Basic chassis, CL1 Steering wheel adjustable in inclination and height, D51 Solid partition with 1 window, E07 Hill-start assist, E1D DIGITAL RADIO (DAB), E1E Navigation, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EL8 2-way front speakers, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, EZ5 Parking package, F2W Winter package, F3Z Comfort closing, F48 Heating for windshield washer system, F66 Lockable glove compartment, F68 Heated and electrically adjustable exterior mirrors, FR1 Rear camera, not foldable, FY7 Multi-button remote control, GE1 6-speed manual transmission TSG 380, H15 Seat heating for front passenger, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 SEMI-AUTOMATICALLY CONTROLLED CLIMATE CONTROL SYSTEM TEMPMATIC, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning for front passenger seat, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, JB4 Active Lane Keeping Assist, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, L LEFT-HAND DRIVE, LA2 Headlamp assist, LC2 LED light strip in the cargo area, LC4 Comfort roof control unit, LE1 Adaptive brake light, LE6 Rear ambient lighting, LX5 Europe, M60 Generator 14 V / 250 A, M72 Vehicle capable of using HVO, MG9 Generator management, MJ8 ECO Start-Stop function, MK8 Speed limiter 210 km/h, MS1 Cruise control, MT5 EMISSION CLASS EURO 6e RDE5 N1, MU4 OM 654 DE 20 LA 120 kW (163 HP) 3800/min, MX0 BlueEFFICIENCY package, RY2 Tire pressure monitoring on front and rear axles, wireless, S23 Front passenger seat, double seat, SA1 Driver's seat cushion depth adjustment, SA6 Airbag, front passenger, SB1 Comfort driver's seat, SE5 Lumbar support, driver's seat, SH1 Thorax-pelvis sidebag, driver, SH2 Thorax-pelvis sidebag, front passenger, SK2 Seat occupancy recognition, driver's seat, V43 Wooden floor, VA2 Interior lining of cargo area up to roof height (wood), VF4 Fabric Caluma black, VV9 Load securing rail system, VV9 Attachment points in roof frame, W54 Rear doors, double-wing, opening to side wall Csdpfxs Agx S No Alfshd We will be happy to provide you with a quote for taking your used vehicle in part exchange. If you would like to lease or finance your vehicle, we will be happy to provide you with a customized offer. Mr. Kiel will be happy to assist you. IMPORTANT: Viewings only by prior appointment! All information without guarantee, errors and prior sale reserved! Images are for illustrative purposes only! Deviations from advertisements or other descriptions are possible, for example, due to errors, incorrect data or transmission errors! ESP, Navigation system, Particle filter, New MOT, Partition = Further information = Year of manufacture: 2024 Engine displacement: 1,950 cc GVW: 2,800 kg Please contact Tobias Ebert for further information.

Condition: used, CTS Type: CW-40/16 CTS Climate Chamber, Climate Testing Cell, Water-Cooled Height-adjustable! Footprint approx. (W x D x H): 3755 x 3470 x 2480 Test chamber approx. (W x D x H): 2500 x 2720 x 2200 Test chamber volume: 14960 liters Temperature range: -40°C to +140°C Temperature deviation 1 K over time Average temperature change rate without heat radiation, measured in the supply air Heating: 2 K/min Cooling: 1 K/min from +110 °C to -35 °C Climate tests: Temperature range: +10 °C to +90 °C Humidity range: +30% to +95% RH in the dew point range: +5°C to 89°C Temperature deviation 0.5 K over time Humidity deviation ±1 - ±3% RH over time Rated voltage: 400V 3/N, PE, 50 Hz Rated power: 53.5 KW Rated current: 92.3 A Compressor: S6J-16.2 Refrigerant: R404A Weight: 5500 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Chsdpfxozd R A Uj Alfsd We will be happy to answer any further questions you may have by telephone.

Condition: used, CTS Climate testing chamber / Shaker chamber CTS TV-70/530 Climate testing chamber Climate testing chamber for combined temperature and vibration testing A used climate testing chamber from the manufacturer CTS Clima Temperatur Systeme GmbH is for sale. The system was developed for combined climate and vibration tests and is suitable for environmental simulation, material testing, electronics testing, quality assurance, as well as development and endurance tests. Shaker/vibration exciter is not included in the offer! Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TV-70/530 Equipment type: Climate testing chamber / Shaker chamber Test chamber volume: approx. 530 liters Test chamber dimensions: approx. 850 x 730 x 860 mm (W x D x H) External dimensions: approx. 1450 x 2250 x 2000 mm (W x D x H) Weight: approx. 1,200 kg Temperature range: -70 °C to +180 °C Heating rate: approx. 5 K/min Cooling rate: approx. 5 K/min Codpozd Uq Aofx Alfshd Refrigerant: R404A / R23 Rated power: 16 kW Rated current: 29.1 A Equipment Shaker chamber for combined tests Test chamber prepared for vibration applications Cascade refrigeration system Temperature testing Accessories as shown in the pictures Application areas Temperature testing Combined climate and vibration testing Environmental simulation Electronics testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x CTS TV-70/530 Climate testing chamber Scope of supply as shown in the pictures Shaker/vibration exciter is not included in the offer. Items, machines or other accessories shown in the pictures that are not explicitly described are not included in the scope of supply. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Vötsch VTSR 7034/S Climate Testing Chamber -70 to +180°C Manufacturer: Vötsch Type: VTSR 7034/S Test chamber volume: 335 liters Climate testing chamber Temperature range: -70 to +180°C Supply voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated current: 22 A Cedpfjuuif Nsx Alfjhd Rated power: 12.5 kW Refrigerant (cooling): R 404 A Refrigerant (heating): R 23 Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Year of manufacture: 2002 TK-11 More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Hardy Type: Hardy TH453-W2E-II Never used (exhibition model) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes and comparable applications. Technical data Number of test chambers: 2 Operation of test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Temperature range: -45°C to +100°C Temperature deviation: ±0.5°C Temperature change according to data sheet: Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Temperature range during humidity operation: +20°C to +85°C Chsdpfx Alezv Rrmofjd Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 999 kW (1,358.26 HP), input voltage: 400 V, type of cooling: water, warranty duration: 6 months, input frequency: 50 Hz, Equipment: documentation/manual, We are pleased to offer for sale a brand-new Jenbacher J320 D05 Combined Heat and Power (CHP) unit, featuring an electrical output of 999 kWe. The equipment is brand new, has never been commissioned or operated, and has zero operating hours. 1. Technical Specifications Manufacturer: Jenbacher Engine Model: J320 D05 Equipment Type: Combined Heat and Power (CHP) Unit Electrical Output: 999 kWe Fuel Type: Natural Gas Condition: Brand New – Never Operated Operating Hours: 0 Hours Availability: Immediately Available Location: Greece 2. Available Configurations Option 1 – Standard CHP Unit | Immediate Availability The brand-new Jenbacher J320 D05 CHP unit is available in its standard configuration and ready for immediate delivery. Cedpfx Alo Ahwibefehd Option 2 – Containerized CHP Solution | Optional Upon request, the CHP equipment can also be supplied and installed in a specially designed containerized solution. This configuration offers a comprehensive, project-specific solution tailored to the customer's technical, operational, and installation requirements.

Condition: used, TIRA Climate simulation chamber / walk-in climate test chamber TIRA TCZ 4022 S -2K Air-cooled | -40 to +140 °C | Refrigerant R449A For sale is a used, walk-in climate simulation chamber from the manufacturer TIRA. The system consists of an insulated test chamber, an air handling unit, external humidification, a machine unit and a control cabinet. It is used for temperature and humidity testing. Technical data: Manufacturer: TIRA Type: TCZ 4022 S -2K Cooling type: air-cooled Temperature range: -40 to +140 °C Temperature stability, supply air: over time ≤ ±0.5 °C; spatially ≤ ±1.0 °C Heating / Cooling: approx. 2 K/min each (-30 to +85 °C, without test item and thermal load) Climate range: +10 to +90 °C Humidity: 10 to approx. 95 % RH Dew point: +5 to +89 °C Humidity stability, supply air: over time ≤ ±2.5 % RH With heat compensation up to 16 kW: Csdpfoz Sn Uvox Alfohd +15 to +80 °C; 15 to approx. 80 % RH Dew point: +10 to +74 °C Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm External dimensions: approx. 2660 x 6460 x 2800 mm Door opening (W x H): 2260 x 2260 mm Climate module KB 127: 1700 x 800 x 1400 mm Control cabinet: 800 x 500 x 2000 mm Power connection: 400 V, 3/PE/N, 50 Hz Rated power: 95 kW; Rated current: 150 A Fuse rating: 200 A, slow-blow Total weight according to specifications: approx. 5834 kg Equipment: Stainless steel interior and floor Double-wing door with viewing window approx. 1000 x 1000 mm Supply air at the top / exhaust air at the bottom on the rear wall Electric heating, direct cooling and dehumidification Bitzer 6G-30.2Y; Refrigerant R449A; Oil SEZ 32 Steam humidifier EDB 40 4 test chamber spotlights à 500 W Insulation: 80 mm PUR and 120 mm mineral wool Floor load: 15,000 N/m²; Wheel load: 1,500 N/wheel (≥ 4 cm²) Application areas: Temperature and climate testing Environmental simulation Material and component testing Quality assurance and development Condition: Used Optical condition according to pictures Scope of delivery: TIRA TCZ 4022 S -2K with associated components as shown in the pictures Items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch   Type: VC 7018   Vötsch Climate Testing Chamber VC 7018, Water-Cooled   Control Panel: “Touch Panel” All control and operating commands can be initiated by simply touching the function symbols on the “Touch Panel” control panel.   Adjustable Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber.   Feedthroughs installed as standard: R1: 125 mm Cedpfx Aozh Huhelfehd L1: 50 mm   Testing chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm   Performance data for temperature tests:   Temperature range: -70°C to +180°C Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±2.0 K   Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min.   Performance data for climate tests:   Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH   Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K   Temperature gradient: 1 to 2 K Temporal humidity deviation in the center of the usable space: ±1 to ±3 % RH   Electrical connection:   Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse: 16 A, slow-blow, provided on site   Refrigerant: R-404A and R-23   Testing chamber volume: approx. 190 liters   Weight: approx. 460 kg net   For your safety as a buyer, please note the following information!   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Panel “Touch Panel” All control and operating commands can be initiated on the “Touch Panel” control panel by simply touching the function symbols. Csdpfx Ajzgbtpslfohd Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measurement cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, ∅ 125 mm, installed on the right 1 feedthrough, ∅ 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature homogeneity, spatial: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Max. heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Data for operation: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A, Nominal power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg For your safety as a buyer, here is the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Dycometal Type: CCK -40/1500T Water-cooled climate chamber Volume: 1500 liters Internal dimensions: Height 1000 mm, Width 1000 mm, Depth 1500 mm External dimensions: Height 2200 mm, Width 1293 mm, Depth 3400 mm Thermal test Minimum temperature: -40°C Maximum temperature: +150°C Cooling rate (temperature gradient): 2.0 K/min. Heating rate (temperature gradient): 3.5 K/min. Chsdszgr Rrepfx Alfjd Temperature stability: ±0.1°C to ±0.3°C Temperature uniformity: ±0.5°C to 1.5°C Climate test: Temperature range: +10°C to +90°C Humidity range: 10% to 98% RH Dew point range: +6.5°C to +86°C Humidity stability: ±1% RH to ±3% RH Condenser: water-cooled Rated voltage: 400 V 3N~PE 50 Hz Power: 16.1 kW, 27.5 A Refrigerant: R-452A Weight: 1120 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SB2/500/80 Csdozd Ultjpfx Alfjhd Water-cooled climate testing chamber Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: Left side: ∅ 100 mm Right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Cjdpfxoziiwue Alfshd Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic test chamber (climatic chamber with solar simulation using an MHG lamp). The unit is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Equipment & Special Features: Precise temperature and humidity control Integrated humidification system with water tank Cooling via water or air system (optional) Feedthroughs for measuring cables available Control via control panel or interfaces (RS232 etc.) Stable test chamber floor, load-bearing up to 60 kg (optional reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Chamber weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 1,600 cm² Weathering: Spectrum 300–3,000 nm, standardized tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with radiation: –20 °C to +100 °C (±1 K) Temperature range without radiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without radiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Cedpfx Alsziizmjfshd Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Codpfx Aezh Huuolfjhd Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Chsdpfezimg Hsx Alfsd Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Chedpfx Aleziixrsfod Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Cedpfx Alszimfvefohd Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK-480/40/10 Water-cooled climate testing chamber Test chamber lighting: Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate: Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8000 W Heat compensation at -20°C: 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A, Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Cjdpfszgaipex Alfohd Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.