Used Notch for sale (376)

Condition: ready for operation (used), Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 Hub/min angle adjustable from - to 30 - 120 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Bjdpfjxaaiisx Aptolp * Machine with 1x new set of notching knives (!!) * installed in 2026 * approx. acquisition costs 1.000 Euro Equipment: - electro-hydraulic notching machine, with angle adjustment * Angle adjustment via hand wheels - Front control panel - Plexiglas protection for better transparency - Hardened blades also for cutting stainless steel - Planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x cutting stops * with movable and replaceable stop bars - lateral cut material ejection - Freely movable foot switch - operating instructions

Condition: used, plate thickness 6 mm Bledpfozkbmwox Aptop blade length 200 mm angle adjustable from - to fest 90 Grad table surface area 750 x 500 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t dimensions 1,2 x 0,8 x 1,2 m Combination machine: edging and notching - foot switch - Emergency stop switch - Documentation

Year of construction: 2021, condition: ready for operation (used), A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible. Bjdpfoyugl Iex Aptjlp

Condition: used, Year of construction: 1983, plate thickness 4 mm blade length 220 mm pressure 0 t weight of the machine ca. 1,5 t dimensions of the machine ca. 1,6 x 1,7 x 1,6 m total power requirement 2,5 kW Combined notching machine with a fixed 90° angle and an adjustable rectangular notching unit variable up to 200mm length x fixed 100mm width. There are 2 manually adjustable stops with a digital display. Bledpfxoynbcue Aptep Axle length X900mm / Y300mm There is no stamp holder / punch / hold-down device for this. These parts can be purchased from Boschert.

Condition: good (used), plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table Bjdpfx Aeyk Dhfoptslp - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Condition: used, Year of construction: 1989, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: Bodpfx Asxaa N Nsptslp - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397088

Condition: used, functionality: fully functional, Year of construction: 1995, Hydraulic shearing machine Manufacturer: Apollo, Type: TF 204 Year of manufacture: 1995 Technical data: Manufacturer: Apollo Type: TF 204 FULL Year of manufacture: 1995 Cutting capacity: 4 mm steel / approx. 3 mm stainless steel Cutting length: 200 x 200 mm Angle setting: 90° fixed Stroke rate: approx. 70 cuts per minute Bledpfx Apsz Az Dnjtjp Dimensions: L 1.00 x W 1.20 x H 1.3 m Weight: approx. 600 kg All information is provided without warranty. A live demonstration is available at our showroom at any time.

Condition: used, Year of construction: 1988, Year ca. 1988 plate thickness bei Stahl max. 3,3 mm table: 1100 x 700 weight 1 t Dimensions (L/W/H) 1,50 x 1,30 x 1,40 mm drive hydraulisch +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Bledpfxjx U A E Se Aptjp +++++

Condition: good (used), Schmedt PraCut 6501 Notching Machine Very good condition, ready to work. A machine for cutting the spine to increase the area of ​​glue application and to cut the spine fold. This makes the block much more durable and binding becomes faster. Manufactured by Schmedt, Germany. Bljdpfjz N Si Eex Aptjp Technical data: Book block thickness: up to 90 mm Book block height: up to 350 mm Requires air supply Power supply: three-phase 380V Productivity: about 250-350 pieces per hour.

Condition: used, plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm blade length 200 mm angle adjustable from - to 30 - 120 Grad no. of strokes 60 Hub/min oil volume 60.0 ltr. table: 1000 x 800 mm total power requirement 2.62 kW weight 800 kg range L-W-H 1000 x 1500 x 1440 mm Furnishing: Blodpfx Apjxab N Retsp - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW Blsdpfx Apjxaavpetsp weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: used, Year of construction: 1990, plate thickness 8 mm Bsdpfx Apexgn Dnetjlp pressure 60 t notching: width x thickness 310-310-8 mm mm weight of the machine ca. 3,5 t

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 398, control type: manual, degree of automation: manual, actuation type: hydraulic, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, input frequency: 50 Hz, type of input current: three-phase, overall weight: 900 kg, cutting length (max.): 150 mm, Equipment: angle stop, foot remote control, Cutting performance (90° notch) - Normal steel: 4.0 mm - Stainless steel: 3.0 mm Cutting angle: 30-120° Cutting length: 150 x 150 mm Working height: 900 mm Table: 1000 x 650 mm Motor power: 3.0 kW Weight approx. 900 kg Bljdevk I Avepfx Aptep Dimensions: 1250 x 1000 x 1160 mm (LxWxH) Equipment: - Angle adjustment 30° - 120 ° continuously - 2 digital displays for the adjustable stops * Set-up stroke * Single stroke * Continuous stroke - Plexiglass protection for better transparency - Hardened blades also for cutting stainless steel - Adjustable stroke height setting - Removable cutting container - Freely movable foot switch BOSCHERT angle adjustment: - the one-piece 30° The upper blade is directly connected to both a left and a right lower blade within a tool - for each notch over 30°, the notch is made once to the left and once to the right. - the swivel adjustment is carried out pneumatically immediately after the first notch has been completed. The machine can be demonstrated on site with power on. All information is provided without guarantee. Subject to errors and prior sale.

Condition: used, Year of construction: 1992, plate thickness 6,0 mm ST plate thickness 4,0 mm VA table-size 780 x 1000 mm blade length 200 x 200 mm strokes per minute 60 min engine output 3 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1400 x 800 x 1300 mm Features: - Electro-hydraulic notching machine - 3x locking precision stop - Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels Bodpfx Aju Dbv Tsptolp - Electric stroke adjustment via digital display - Replacement blade (used) - Machine light - Side cut material ejection - Freely movable foot switch - Operating instructions

Condition: good (used), Year of construction: 1980, machine/vehicle number: PN 0312, Offer 26138 Bledpfx Apey U Hv Ujtsp Technical data: - 90° cutting head, pneumatically operated - Cutting thickness: - Normal steel: up to 2 mm - Stainless steel: up to 1.5 mm - Aluminum: up to 3 mm - Blade length: 130 mm - Table size: W 600 x D 380 mm - Working height: 940 mm - Foot pedal - Compressed air requirement: 6 - 8 bar - Space requirement: approx. W 600 x H 1250 x D 850 mm - Weight: approx. 180 kg

Condition: good (used), Gebruikte inkepingmachine van Euromac Bodpfsywg S Ijx Aptolp Type: 250 4 s Capaciteit: 250 x 250 x 4 mm

Condition: good (used), Year of construction: 2009, Technical data can be seen on the data plate! Bjdjwqmrhopfx Aptolp

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment Blsdpfx Apexab Srjtep - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Bjdpfx Aoziy Idjptolp Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: used, functionality: fully functional, Year of construction: 1992, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Notching machine Boschert LB12 Super Machine color: Reseda green RAL 6011 Cutting angle: 90° Cutting capacity: 4 mm St42 steel 3 mm stainless steel Connected power: 4 kW Weight: 850 kg Machine equipped with an extra-large machine table with double T-slots Blodpjwfymzefx Aptsp parallel to the blade, as well as an additional T-slot at the front of the table, at a 45° angle to the blade 2 stops with a sliding stop bar, 500 mm Internal stop for cutting strips up to 225 mm Plexiglass guard Drive via Flender gearbox-brake motor Used machine, fully functional, in very good condition

Condition: used, Year of construction: 1990, cutting angle 90 ° cutting length 150 x 150 mm work height max. 900 mm Bledpfxjwgi Nhj Aptep table: 1000 x 650 mm engine output 3,0 kW weight 900 kg

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment Bjdpfx Aoxab Sxoptjlp - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087

Condition: used, plate thickness 4,0 mm ST plate thickness 3,0 mm VA Blodpsvg R Rhjfx Aptop table-size 800 x 800 mm blade length 250 x 250 mm strokes per minute ca. 55 min engine output 4 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1300 x 1300 x 1300 mm Features: - Electro-hydraulic notching machine - 2x locking precision stops, with stop bars - Single/continuous stroke selectable - Front finger guard - Freely movable foot switch

Condition: used, Year of construction: 2007, saw-blade dia. 250 mm turning speeds 2800 U/min Blsdpfxoztrwlj Aptep pressure 6-7 bar weight of the machine ca. 273 kg

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: Bedpfjxabpdsx Aptolp - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.