Used Notch for sale (347)

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST Cjdpoxabx Ejfx Aa Norb thickness at "Niro-steel" 4.0 mm plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA Csdpsxab Srjfx Aa Nsrb

Condition: new, 6.0 mm ST 40 Crjdpfxjxcuybs Aa Nob 3.0 mm VA 30 - 140 Grad blade length 200 x 200 mm table: 900 x 990 mm work height max. 940 mm Punching capacity 35.0 in 6.0 mm ST 40 Throat / punching unit 135 mm engine output 4.0 kW weight 1020 kg range L-W-H 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: new, 6,5 mm ST 40 3,5 mm VA 90° Grad blade length 250 x 250 mm table: 810 x 750 mm work height max. 950 mm engine output 4,0 weight 630 kg range L-W-H 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges Cjdpfx Ajxcux Dsa Njrb - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel Cedpfx Aexaavpsa Nsrb - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm Csdpfx Aaexab Sxo Norb blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087

Condition: new, plate thickness 2,0 mm tube diameter 60,0 mm motor 400 Volt Cedpsw U U Tyefx Aa Nerb

Condition: used, plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm blade length 200 mm angle adjustable from - to 30 - 120 Grad no. of strokes 60 Hub/min oil volume 60.0 ltr. table: 1000 x 800 mm total power requirement 2.62 kW weight 800 kg range L-W-H 1000 x 1500 x 1440 mm Crjdpfx Ajxab N Roa Neb Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

Condition: new, 3.0 mm ST 40 2.0 mm VA 90.0 Grad blade length 130 x 130 mm table: 640 x 460 mm work height max. 900 mm Crjdpfexcuxkox Aa Nob engine output pneumatisch weight 200 kg range L-W-H 600 x 670 x 1270 mm Properties: - Notching with burr-free cut, without deformation of the cutting edges - Machine body made of high-quality gray cast iron, base made of sheet steel - Cutting blades made of surface-hardened tool steel - Effortless work thanks to pneumatic drive - Operation using a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the pivoting stops - Protective cover in front of the cutting blade for high safety Scope of delivery - 1x set of cutting blades - 2x pivoting material stops - Plexiglas protective cover - Foot pedal - Base frame

Condition: used, Year of construction: 1996, 4.0 mm 3.0 mm 30 - 120 Grad blade length 150 x 150 mm work height max. 900 mm table: 1000 x 650 mm Crsdpfx Ajxabpdja Neb engine output 3.0 kW weight 850 kg range L-W-H 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional "Touch Pad" control panel * Set-up stroke * Single stroke * continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - adjustable lift height adjustment - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becomes pneumatic, immediately after completion of the first notch, lightning fast carried out.

Year of construction: 2019, condition: ready for operation (used), A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible. Crjdpfjwgnglsx Aa Njb

Year of construction: 2001, condition: ready for operation (used), A notching saw Elumatec for post-and-beam profile combinations is available. Lower saw blade: diameter: 550mm, tilt range: 45°-60°, max. cutting height: 210mm, speed: 2800rpm, power: 3kW. Upper saw blade: diameter: 500mm, tilt: 60°, max. notching depth: 190mm, speed: 2800rpm, power: 3kW. Stroke: 830mm, working height: 990mm, swivel left/right: 30°/30°. Machine dimensions X/Y/Z: approx. 3000mm/1450mm/1600mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible. Cedpew Nykgefx Aa Njrb

Condition: used, functionality: fully functional, Year of construction: 2004, sheet thickness steel (max.): 4 mm, cutting length (max.): 200 mm, Type HKA 200 x 4 Capacity 200x200x4mm Cjdpfx Aov Efu Sea Nsrb Variable angle adjustment Blades reground

Condition: excellent (used), Notching machine 30 - 135° INDUMASCH V 204 blade length 200 x 200 mm max. sheet thickness: Crjdpfsunyk Asx Aa Nsb mild steel 4 mm Drive power 4 kW Dimensions L x W x H 1700 x 1000 x 1500 mm Weight 940 kg

Condition: good (used), functionality: fully functional, Year of construction: 1991, sheet thickness steel (max.): 6 mm, power: 0.004 kW (0.01 HP), overall weight: 1,600 kg, Cutting 6 mm at 400 N/mm² 4 mm at 600 N/mm² Stepless angle adjustment 30 - 120° Cedpfxjygua De Aa Nerb Drive power approx. 4 kW

Condition: good (used), Notching milling machine Crsdpfeb A Hlajx Aa Nsb -automatic hydropneumatic milling feed -for milling cutters max.: Ø 250 mm

Condition: good (used), Notching milling machine -automatic hydropneumatic milling feed Crsdeb A H Hfopfx Aa Neb -Maximum cutter diameter: 250 mm

Condition: good (used), Notching tool, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch stamp Crsdpfx Aasfmv Naj Nsb -Release tool: pneumatic -Notch: 18 x 9 mm -Dimensions: 180/200/H270 mm -Weight: 4.8 kg

Condition: good (used), Notching machine, sheet metal notcher, notching shear, corner notching machine, corner shear, corner shear -Max. cutting capacity: approx. 2 mm Credpfxedf U S Aj Aa Nsb -Blade length: 102 mm -Dimensions: 620/590/H1790 mm -Weight: 150 kg

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used variable angle notcher by Euromac Crjdpfx Aaex E U Awe Neb Type Multi 220 6 Capacity 220 x 220 x 6 mm Equipped with radius cutting punch at the rear side

Condition: new, Year of construction: 2026, functionality: fully functional, The Randek cut-out saw JS400C is designed to make cut-outs at the end of pieces of wood, for example, for inserting a belt beam in vertically standing handles. The machine fixes the wood pneumatically and makes two cuts with the two 400mm diameter saw blades. The maximum length is 380mm and the depth of cut can be adjusted to a maximum of 115mm. The saw can be operated quickly and easily by means of a foot pedal. Functional description The wood to be notched, e.g. a handle, is pushed into the covered saw slot up to the set stop. and. The protruding end is placed on a roller block (not included). A foot pedal is used to pneumatically fix the inserted wood and trigger the sawing process. Technical description - Notching depth: 30 - 115 mm - Notching length: 10 - 380 mm - Wood thickness: 30 - 70 mm - Electrical connection: 3 x400 V, 50 Hz, 25 A - Compressed air: 0,5 - 0,8 MPa (5 - 8 bar) - Saw blades: HM 400/30-3,5/2,5/40 Safety The saw is well sealed against tampering by means of a cover plate. When the cover is opened, the electric current is automatically cut off, which minimizes the risk of injury. Advantages Crodpsd Arwhefx Aa Nsb - Makes notching/cutting effective and precise - Flexible and easy to set up - Easy to operate - The set working height and the possibility to operate the machine by foot pedal makes the working conditions easy.

Year of construction: 1996, condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Codpfx Aaoq Awg Ee Njrb

Condition: used, Max. sheet thickness: 6 mm steel Crjdpot D R Nnofx Aa Neb Adjustable angle 30-120 degrees Knife length: 200 mm knife sharpened Weight: approx. 1,200 kg

Year of construction: 1993, condition: used, Cutter diameter: 300 mm Max. release width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spray device Manual feed Crodpsrv A Hmsfx Aa Neb Weight: approx. 280 kg

Condition: used, Year of construction: 1992, machine/vehicle number: 27123, Offer 25466 Technical Data: Crodpfxeyfchge Aa Neb - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² tensile strength: 4 mm - at 700N/mm² tensile strength: 2.5 mm - Aluminium, plastic: 6 mm - Cutting angle: 90° - Depth stops - Foot pedal - Space requirements approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg