Used Oil Chip Centrifuge for sale (16,855)

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, Codpfxjvmbzwo Addeaa clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. Cjdpferivv Eox Addsaa The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Cedpfx Aderrwclsdjaa

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Cajdpfx Adsvmbzqodoa Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. If you have any questions, just call or send an email

Year of construction: 2024, condition: new, Horizontal Oil Quenching Furnace Technical details: Caodot D Tkuepfx Addea Size range: 450x350x300 up to 1200x800x800 Load capacity: 100 kg to 1200 kg Transferring duration: maximum 29sec, to lower than 17sec Ultimate temperature: 1320°C Final Vacuum: 10-1/10-4 Pa Temperature Uniformity Survey (TUS): ≤±5 °C Pressure Rise Rate: ≤0.5 Pa/h Cooling gas pressure:

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: Caodpfoq Nyzbox Addja - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: used, Used Flottweg model Z4D-3/409 Sedicanter horizontal decanter centrifuge. Bowl made of duplex stainless steel 1.4463, has inside diameter 470 mm, maximum rotation speed 4800 rpm, maximum sediment density 1.3 kg/dm3, maximum working temperature 50°C. Scroll and inlet protected by tungsten carbide. Unit driven by 30 kW motor. Includes hydraulic device for screw drive with power consumption 7.5 kW and differential 2-25 rpm, control panel and technical documentation. Codex Db N Sopfx Addeaa Specifications: Bowl Diameter (Length): 18.504" Material Of Construction: Duplex Stainless Steel 1.4463 Motor Power: 30 hp Max Bowl Speed: 4,800 RPM Conveyor Material: Tungsten Carbide

Condition: excellent (used), 400 V, 50 Hz, 2.2 kW, weight: 420 kg, dimensions: 800 mm x 1300 mm x 1080 mm. Caedpfxjx Ada Dj Addea

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment Cedex Ah A Aopfx Addsaa - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZOF01, type of input current: three-phase, total width: 900 mm, total length: 1,200 mm, total height: 2,200 mm, input voltage: 220 V, workpiece weight (max.): 450 kg, pass-through height: 1,200 mm, Equipment: CE marking, This filling machine could be linear tor rotary type which is designed according to customers capacity and filling volume. It suits different size of plastic and glass bottles, and the height of the filling nozzles is adjustable. The filling nozzles are Cedpfx Adexul Igjdjaa made of SS304 or 316, resist high temperature filling. drip-proof , via photoelectric detection to ensure no bottle no filling. Widely used for liquid and paste filling. Also can be customized for other types of filling based on customer requirement.

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Cedpfxex Aurks Addjaa

Year of construction: 2012, condition: excellent (used), Description to follow! Caodpox A H Rxofx Addoa

Condition: used, mileage: 9,75,000 km, Year of construction: 2014, Serial number: YS2R6X2000535xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21248 Csdew Ucivepfx Addoaa Specifications: Delivered with new EU inspection 2014 model Approx. 975,000 km Opticruise gearbox Full air suspension Tires (see photos) 2-way tipping Euro 6 Length: 860 cm Width: 255 cm Wheelbase: 410 / 135 cm Curb weight: 13,570 kg 6x2 581 hp Tow hitch Toolbox Autoline S90 sand spreaders High-beam auxiliary lights 2 x rotating beacons Minor damage to passenger-side step (see photos) 2 x beds Radio/CD Air conditioning Description:Scania R580 6x2 chip truck with 2-way tipping bed from 2014 for sale.The truck is in daily operation and will be delivered with a fresh EU inspection.A 2012 3-axle chip trailer can be included for an additional cost. Delivery by agreement. Km: 975000 HK: 580 Technical approved: Yes EU-approved until: 14.10.2026 Own weight: 13570 Total Weight: 28000 Payload: 14355 Width: 255 Length: 860 Euro: 6 Model: R580 Gearbox: Automatic

Condition: ready for operation (used), The K50-7S centrifuge is equipped with an inclined cover for a lower infeed height and 7 settings of individual spinning speed and spinning time Cjdpfjxy Tdtjx Addoaa

Condition: new, Year of construction: 2025, The manufacturer guarantees the quality of purification. A certified control cabinet allows for constant monitoring of the correctness of operation. The negative pressure fan 11 kW / 11300 m3/h, operates on the turbine principle, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust absorber the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility of building a ceiling system and connecting several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Caodpfxsudalwo Addja Mobile drive system facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% airtightness of the system, have also been equipped with a mobile system mobile Control cabinet for switching the device on/off The polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 11 kW Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 960 mm Number of filters 64 pieces Inlet diameter 350 mm Outlet diameter 500 mm Efficiency 11300 m3/h Dimensions (width x length x height) 1190 x 3160 x 2320 mm (without upper elbow) Net weight 710 kg

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Codpoimwp Ssfx Addsaa Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Caodpsxxh Taefx Addsa Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: excellent (used), Year of construction: 2005, Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil, 250kW Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system Caodpfxexnytdj Addea

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled Caodpfx Adewp Rqfedea All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: excellent (used), For a simple, clean and effecient way to apply coatings, the Dubor spray master manual sprayers come in various sizes and configurations to perfectly suit your needs. Choose from mobile units on rollers for maximum flexibility, or wall-mounted and table-mounted options for designated spraying areas.  Cjdpfjxxyu Nox Addsaa The AM-20-M is a mobile spray unit with a 5 litre stainless steel pressure tank and 4m material hose. This requires connection to external compressed air. 

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. Cajdox Agpzepfx Addsa For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: ready for operation (used), Year of construction: 1990, operating hours: 4,500 h, Cylinder (oil headed) Cjdpfx Adewiu Sgjdeaa

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Codexy Tmujpfx Addeaa

Condition: good (used), Oil-water separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer: Jorc, oil-water separator -Type: AIRGROUP-SEP 30 -Dimensions: 970/440/H900 mm Cedpfjxz Avnex Addoaa -Weight: 56 kg

Year of construction: 2011, condition: good (used), control Siemens für Holz & Späne Kompakt Caedpfxexz Hi Se Addea weight of the machine ca. 2,4 t