Used Okuma Lr 15 M for sale (225)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random Hjdpfx Abjyf Ncqjtot ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control Hsdpfx Aertrlzjbtot 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: used, OKUMA DC POWER SUPPLY Hedpfx Aoy Supwsbtet DCPS-1 FOR 2 AXES

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 Hodpfx Abjy S Dr Uotot . 2663

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from production facilities that were in operation until they were decommissioned. Hodeyn R S Eepfx Abtot Condition: used (functional)

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 Hodey Suyvepfx Abtot . 03487

Condition: ready for operation (used), Year of construction: 2005, operating hours: 31,899 h, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 280 mm, number of axes: 2, This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max diameter of the parts for the table pallet: 160 mm • Max. Turning height: 200 mm Extra Information • Machine still under power / two machines with interlinking available • Single-shift operation for 7 years • Cutting TIME: • 1st machine: 33,594 hours • 2nd machine: 31,899 hours • 3rd machine: 33,863 hours • 4th machine: 34,408 hours • The machines operate in a linked configuration (2 machines per pair, processing on both sides) Technical Specification Hedpfxezt Nvfe Abtot Taper Size VDI 40

Condition: ready for operation (used), Year of construction: 1974, Available immediately ex-works: L & Z lathe, Okuma Center height 220 mm Diameter over bed 440 mm Diameter over cross slide 300 mm Spindle bore 55 mm Drive power 5.5 kW Chuck Tool holder Weight 2400 kg Price: EUR 1,500.00 plus VAT, ex-works Hedpszwuftofx Abtst

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA Hsdpfx Asy Rnbdebtjt CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm Hsdjy Aaxrspfx Abtet • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Hedpoxph Sqsfx Abtot

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Hsdpfoyttwzox Abtst

Condition: used, Year of construction: 1995, turning diameter 150 mm Hodpfx Abjyi Hwtotot turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Spindle bore: D62 mm Turret: 12-station Max. tool size: 25x25 mm Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment Hedpjziqp Sefx Abtot - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer Hsdpfx Aberfw Nhstst 20 magazine places chip conveyor

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 450 mm, travel distance Z-axis: 520 mm, spindle motor power: 15,000 W, controller manufacturer: OKUMA, controller model: OSP U10L, number of axes: 2, Horizontal turning machine manufactured in 2008. This Okuma ES-L10II features a maximum turning diameter of 390 mm and a maximum turning length of 500 mm. It is equipped with a 10" chuck and a robust Okuma MQ Turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma ES-L10II machine we have for sale. Contact us for further details regarding this machine. • Working capacity: • Max swing over bed: 520 mm • Max swing over cross slide: 450 mm • Max turning diameter: 390 mm • Max turning length: 500 mm • Rapid traverse: X 20 m/min, Z 25 m/min • Main spindle: • Spindle bore: 80 mm • Speed range: 50–3,000 rpm • Gear ranges: 2 automatic • Max spindle torque: 416.9 Nm • Spindle motor power: 20 kW (continuous), max power at 251 rpm • Chuck: 254 mm (10"), through‑hole Ø70 mm • Spindle nose: JIS A2-8 • Turret: • Type: Okuma MQ turret • Stations: 12 • Tool shank size: 25 × 25 mm • Boring bar capacity: Ø40 mm • Indexing time: 0.1 s per station • Clamping force: 4,000 kg • CNC control: • Okuma OSP-U10L • 10.4" TFT colour display • NC Operating Monitor • Cycle Time Reduction Function • Three-colour machine status indicator • Option included in quotation: • 15 kW high-torque spindle, 25–3,000 rpm, max torque 570.7 Nm Additional equipment • Chip conveyor • Automatic coolant system (0.25 kW) • Tool kit Hedpfxjzl Auxj Abtjt • Instruction and spare parts manual • Dutch operating manual Technical Specification Driven Tools No Counter Spindle Yes

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC-Steuerung Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Hjdpfxozkpu Ne Abtet Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: good (used), CNC control, control panel, machining center -Removed from a: CNC lathe, manufacturer: Okuma, type: LB15 -complete unit Hodpfodtcrkox Abtjt -Dimensions: 790/600/H495 mm -Weight: 79 kg

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Hodjzpd Aljpfx Abtst Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 220 mm, travel distance Z-axis: 300 mm, spindle motor power: 15,000 W, spindle speed (max.): 4,000 rpm, total height: 2,650 mm, overall weight: 5,000 kg, controller manufacturer: OKUMA, controller model: OSP-E100L., swivel angle C-axis (max.): 360 °, number of axes: 3, Vertical turning machine manufactured in 2004. This Okuma LVT300 features a maximum turning diameter of 280 mm and a turning length of 200 mm. It includes a spindle speed range of 60–4,000 rpm and a turret with 12 stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the Okuma LVT300 machine we have for sale. Contact us for further details. • X-axis rapid traverse: 60,000 mm/min • Z-axis rapid traverse: 30,000 mm/min • Max. turning diameter: ϕ 280 mm • Max. turning length: 200 mm • Turret stations: 12 • Rotary tool speed (M model): 45–4,500 rpm • Floor space: 1,400 x 3,180 mm Hsdpfxey Shiqj Abtet Technical Specification Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: OKUMA, number of axes: 5, This 5-axis Okuma LB2000EX II was manufactured in 2013. It features a maximum turning diameter of 360 mm and a turning length of 500 mm. The machine includes a robust turret with 12 stations and a main spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EX II horizontal turning machine we have for sale. Contact us for further details. • Maximum turning diameter: 360 mm • Maximum turning length: 500 mm • Maximum bar capacity: 62 mm • W-axis travel: 500 mm • C-axis indexing: 0.001° • Main spindle nose: ASA 6" • Sub-spindle maximum speed: 6,000 rpm • Sub-spindle motor power: 11 / 7.5 kW • Turret stations: 12 • Driven tool speed range: 45–6,000 rpm • Driven tool motor power: 5.5 / 3.7 kW • Turning tool size: 20 × 20 mm • Boring bar capacity: Ø32 mm Additional equipment • Bar feeder: TOP XF365 (YOM 10/2013, installed 2014) • Hinge-type chip conveyor • Manual tool setter (presetting) Hsdpfx Aszcphuebtjt • Parts catcher Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Okuma OPUS 5000 GHP power supply, 5000T, serial number: 00198, see photo for serial number. Used, shows normal signs of wear, 100% functional. Hedpfsi Ecarjx Abtst

Condition: ready for operation (used), Okuma BL-D30A servo drive, serial number: 22-100, serial number as shown in the photo, used, shows normal signs of wear, 100% functional. Hjdpfxji Ecaco Abtst

Condition: ready for operation (used), Okuma BL-D30A servo drive, serial number: 22-102, see photo for serial number, used, shows normal signs of wear, 100% functional. Hedoi Ecagopfx Abtjt

Condition: used, Year of construction: 1980, Machining center Hsdpfjyycv Iex Abtjt