Used Optical Griding for sale (2,617)

Condition: excellent (used), Optical push button, proximity switch Bodpfx Amsb A N Hceneli -Type: IRD-4PDesign: M30 -Ignition protection type EExd category: 2G/D -More robust and interference-resistant: proximity switches -Weight: 0.7 kg

Condition: used, Optic Sensor, Light Sensor, Light Barrier, Rotary Beam Light Curtain, Optrotrap -Manufacturer: Sick, rotary beam light curtain with base plate -DC 24V 10W -RW: max. 5m Bedpfjihi Uuex Amnjli -Dimension: 220/160/H205 mm -Total weight: 6.8 kg

Condition: good (used), Control card, controller, PLC controller, optical card, optical control card, optical interface Bodpehh Dt Ssfx Amnjli -Manufacturer: Dr. Schenk Industriemesstechnik, Optical Control Card -Type: XVP2, Optical 4160631 -Box dimensions: 280/200/H50 mm -Weight: 0.8 kg

Condition: used, Power cable, solar cable, fiber optic cable, fiber optic line, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Application area: outdoor Bedpfx Amsf T Spaonoli -Length: 120 m -Price: complete -Dimensions roll: Ø 900 x 510 mm -Weight: 28 kg

Condition: good (used), Power cables, solar cables, fiber optic cables, fiber optic lines, data cables, LAN cables, fiber optic cables -Manufacturer: Lapp Kabel, fiber optic cable -Type: Hitronic HQN1500 4G 50/125 OM2 -Area of application: Outdoor area -Length: 217 m Price: complete -Roll dimensions: Ø 750 x 410 mm Bedpfx Amof Tiuyeneli -Weight: 20 kg

Condition: good (used), Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 Bodpjb A N Unsfx Amneli -Connector: M-8 -Expansion unit: PNP -Weight: 0.2 kg

Condition: good (used), Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Output: 1 -Connector: M-8 -Expansion unit: PNP Bsdpfx Amjb A Hhysneli -Weight: 0.2 kg

Condition: good (used), Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor Bljdpfjb A N Upex Amnji -Output: 1 -Expansion unit: PNP -Weight: 0.2 kg

Condition: good (used), Fiber optic cable, light sensor -Manufacturer: IFM -Type: FT-30-AA-R8 -Quantity: 4x Available -Price: per piece Bjdob A Sctjpfx Amnsli -Weight: 0.2 kg

Condition: good (used), Optical sensor, light sensor, light barrier Blsdpfx Amjb A N Thsnsi -DC 24 V 10 W -RW: max. 5m Price: per piece Quantity: 3 available -Weight: 3.5 kg

Condition: good (used), Optical sensor, light sensor, light barrier -Type: OG5029/OGT-HPKG -Price: per piece Blodpjb A Rmaofx Amnei -Quantity: 11 available -Weight: 0.1 kg

Condition: good (used), Fiber optic measuring amplifier, fiber optic sensor, fiber optic sensor with digital sensor -Outputs: 2 -Connector: M-8 -Expansion unit: PNP Bljdpob A Ny Sofx Amnji -Weight: 0.2 kg

Condition: used, functionality: unexamined, Ferwood code: RU0008978 – Manufacturer code: 2-083-01-5522 – Condition: Used – Functionality: Not tested – If interested, we offer refurbishment services; please contact us. Bedpfx Amjwtf Uyjnoli

Condition: refurbished (used), Condition: refurbished, since then unused and professionally stored in case of the manufacturer Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm up to 4 kW mappings: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber connector: Trumpf B or type D (LLK Auto) Bsdeg Sfdlopfx Amnsli Laser: CW laser up to 4 kW working range height (Z): ± 5 mm Robot adaptation: any Repaired/exchanged - Lens - pressure spring - protection spring - cover - Beam diaphragm - Wave spring - Fiber coupling weft The unit was also cleaned, adjusted and force-normalized.

Condition: used, functionality: fully functional, Precise Defect Identification The Optyx sorting platforms are characterized by exceptional color, shape, size and texture recognition. High resolution Vis/IR, Tri-chromatic, or UV cameras ensure even the subtlest defects are identified and targeted for removal increasing quality. Precise Removal of Defects and Foreign Material The intelligent ejection system features precision pneumatic-based valves with exceptional response time for pinpoint accuracy. Unparalleled yield improvement can be achieved with the optional three-way sorting. Intelligent Sorting Advanced object-based image processing allows FMAlert™ to track foreign material providing you with a digital record. Custom algorithms determine shape, length, width, curvature, symmetry, circularity and other special characteristics improving quality. Using cameras, Optyx recognizes the size and shape of each object, as well as millions of subtle color differences. As the product passes through the sorter, it inspects it from above while on the conveyor belt. The product is then moved to the end of the Optyx conveyor for an overhead view from below. Using proprietary image processing technology designed specifically for dates, the sorter quickly analyzes the images, comparing each item to previously defined standards as accepted or rejected. When the sorter identifies objects to separate from the main product section, it activates the ejector system, comprised of a series of air valves that reach the full width of the system. As the air is expelled, the valves identify each object to be separated and removed from the main product section. Features & Benefits • Multiple camera configurations to match product requirements • High Resolution Vis/IR, UV or Tri-chromatic camera options • HID, UV, & LED lighting options • Simple, user-friendly operation, cleaning and maintenance • Easy adjustment for product change over • Wet or dry products. Typical Applications Potatoes (chips, whole, strips, sliced, diced, wedges), fruits, nuts, vegetables, cereal, confectionery, dry beans, fresh-cut (including core removal), raisins, snack foods, wet or dry products. Sorting Excellence Green bean processors use an Optyx 3000 to re-sort the defect streams of other sorters to increase yields. Output. 6 TN metric/H = 13,000 lbs/h = 5,896 kg/h. Production may vary depending on the product. Blsdswnxupepfx Amnei Work measures: Long tape: 2.20 m. Tape width: 0.66 m Download: 1.22 m.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Processing (S) of the fiber deviation map from the laser scatter signal. Bljdpfx Amsxvxrnjnoi Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Bledpfx Aexu I A Homnei

Condition: ready for operation (used), Two Keyence optical LED light-band micrometers are available. Repeatability: +/-0.03µm, sampling rate: 16000 measurements/s, light source: green InGaN LED. Documentation available. On-site inspection is possible. Bljdpfx Aov R Exusmnji

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Bizerba for label and seal inspection in packaging lines is available. Camera technology: dual-camera configuration, camera placement: top and bottom, conveyor belt speed: 90m/min, machine dimensions X/Y/Z: approx. 2100mm/900mm/1600mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Bjdpfx Amow Duvzensli

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Bodotz Dkyjpfx Amnsli

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Blodjwb E Sbjpfx Amnei

Year of construction: 2021, condition: excellent (used), Tomra Optical sorter model 1000 halo. For high performance sort/grading. top and bottom sensors with rejection. Can work on various veg and fruit products. Blodpfouixp Ejx Amnsi

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Bljdpfx Ameuyig Sjnsi Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Year of construction: 2010, condition: used, Newtec CELOX optical sorting line Machine has been upgraded to the newer type CELOX in 2016 The order is based on the following specifications Ambient temperature ± 5 – 25 ºC. Product Clean, washed carrots Capacity: 8 to 10 tons per hour, depending on the batch (quality and sorting) Product foreign materials The Celox cannot detect foreign materials such as glass, wood, stones etc. Functionality: Length: +/- 3mm (less than 1% errors) Diameter: +/- 1mm (less than 1% errors) broken: 60-65% is removed (on "normal" broken carrots) there will be 5-6% good carrots among the errors C/S shape: 85-90% is removed. There will be 3-4% good carrots among the errors Volume: +/- 5% -Incl. conversion of complete camera unit to new version -9 Cameras with 8 megapixel resolution (current 2 magapixel) Cameras look at the carrots from above and below at an angle -Better detection of root rot -Better software for deformed products Blodpeurhx Nsfx Amnsi -Better software for quality and dimensions -Incl. set of vibrating channels for the new belts

Condition: like new (used), Year of construction: 2019, operating hours: 70 h, functionality: fully functional, machine/vehicle number: 19051008, type of input current: three-phase, Equipment: documentation/manual, FOR SALE – Industrial Optical Sorter PROTEC Duett 100 (2019) Industrial-grade Duett optical sorter, purchased in 2019, with limited usage and maintained in excellent condition, now available as is. 🔬 Technology & Engineering • High-resolution multi-camera vision with dual-side inspection • LED + optional NIR lighting for advanced defect detection • Ultra-fast electronically-controlled air-jet rejection • Touchscreen HMI with precise adjustment capability • Stainless steel construction for hygienic environments 📦 Products It Can Sort The Duett can accurately sort a wide variety of fresh and processed products, including: 🍎 Fruits • Diced or sliced apples • Diced or sliced pears • Diced or sliced peaches 🥕 Vegetables & Others • Fresh or brined olives • Potatoes (whole, sticks, slices) • Fresh or frozen vegetables (green beans, peas) • Sliced or diced vegetables (carrots, cauliflower) • Leafy vegetables and herbs (lettuce, rocket, valerian) Effectively identifying color defects, rot spots, foreign objects and non-compliant products. Year: 2019 • Condition: Lightly used • Sold as is Bedpfxoym Rqle Amnjli Full technical documentation available upon request.